Error : Photoshop.exe - Entry Point Not found

I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
Photoshop.exe - Entry Point Not found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
-Jitu

Install SP3. It's required in order to run Photoshop on Windows XP.
http://www.adobe.com/products/photoshop/tech-specs.html

Similar Messages

HELP....Error Message...Photoshop.exe-Entry Point not found

Hello
I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
Photoshop.exe-Entry point not found
The procedure entry point
?terminate@struturalimageeditingYAXXZ
Could not be located in the dynamic link library Patchmatch.DLL.
I have tried to redown load but keeps saying that it is downloaded
Help please
Bobbi-Lee

Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.

Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7. The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found” X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll. My only option in this window is an OK button. If I click this button several times, the program eventually opens. Below is screen shot of the error window.
Thanks,
Matthew Kraus

Thanks Zeno and others. Uninstalling Quicktime and then reinstalling it was the fix.
Thanks again,
Matthew Kraus

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

Owl Orphanage: Photoshop.exe - Entry Point Not Found

Using Photoshop CS5 64 bit on Windows 7. New problem recently started. Whenever I try and open PSCS5 I get the following error. I then click OK and PS opens without further problem.
OWL Orphange: Photoshop.exe - Entry Point Nont Found. The procedure entry point ONPreviewLayerRelease could not be located in the dynamic link library ONImaging.dll. Any suggestions?
Thanks,
Matthew Kraus

Did you use their installer to install your copy of the plug-in?
This is the list of files put in place by OnOne Software's Perfect Resize on a Windows 7 x64 system for 64 bit Photoshop:
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)
05/17/2011 09:40 AM           112,640 ONPSEmulator2.dll
05/17/2011 09:40 AM           869,888 onOneCoreFoundation.dll
05/17/2011 09:40 AM           505,856 ONImaging.dll
05/17/2011 09:40 AM           101,888 ONDocument2.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
05/17/2011 09:40 AM           250,368 OnOneWidgets.dll
05/17/2011 09:40 AM           345,088 onOneToolbox2.dll
05/17/2011 09:40 AM         1,198,080 icuuc42.dll
05/17/2011 09:40 AM         1,409,536 icuin42.dll
05/17/2011 09:40 AM             3,072 icudt42.dll
05/17/2011 09:40 AM           237,568 glut32.dll
05/17/2011 09:40 AM           147,968 ONCore2.dll
05/17/2011 09:40 AM           272,896 glut64.dll
05/17/2011 09:40 AM           350,720 onOnePR7ProEdCheck.dll
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Panels\onOne
05/17/2011 09:40 AM               233 onOne Palette Config.txt
05/17/2011 09:40 AM             4,681 onOne.jsx
05/17/2011 09:40 AM           610,989 onOne.swf
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Perfect Resize 7.0 Professional Edition.plugin
05/17/2011 09:40 AM         1,145,344 GFAutomation.8li
05/17/2011 09:40 AM         3,138,560 GFFilter.8li
05/17/2011 09:40 AM         1,470,464 GFFormat.8li
05/17/2011 09:40 AM           317,440 onOneActivationToolbox.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
-Noel

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Error: iTunes.exe Entry Point Not Found

I recently upgraded my iTunes to the latest version and am now receiving the following error when I try to open it:
"iTunes.exe - Entry Point Not Found
The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
and when I click ok it then gives me this error message
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
I have tried the following several times:
reinstalled/repaired iTunes
reinstalled/repaired QuickTime
reinstalled/repaired Apple Software Update
reinstalled/repaired Apple Application Support
none of which have worked. I get the error each time i try to open iTunes and then it just shuts down.
I have also tried to open iTunes in safe mode - per a recommended solution on another thread - which does not work. And I changed my control panel/quicktime/audio settings to safe mode - per a recommended solution on another thread - which does not work.
I have not added any other new software
I am on an old lenovo T61 laptop with Windows XP
Any and all suggestions would be greatly appreciated.
Thanks in advance!
Charles

This thread has a solved star:
http://discussions.apple.com/thread.jspa?messageID=3918542

Error: Javaw.exe - Entry point not found

Hi,
I've stuck in a problem during following the OWB runtime repositiory Assitant
i got a error message
javaw.exe - entry point not found
The procedure entry point OCIconnectionpoolcreate could not be located in the dyanimic link library OCI.dll
Plz help
Edited by: Nitesh Bhagat on Mar 18, 2009 8:29 AM
Edited by: Nitesh Bhagat on Mar 19, 2009 7:02 AM

Hi Nitesh.
Is there any other error message or details?
Wich version are you using? What are you trying to do in the assistant (create rep, drop rep, ...)? Did this software ever worked or is this a new installation?
Usually, this is related to the PATH variable and a new installation of other oracle products.
If this persists, try deinstall a install OWB again.
Good luck!
Marcos

Error: EdgeInspect.exe - Entry Point Not Found

I'm getting the following error message when launching the Adobe Edge Inspect:
---------------------------EdgeInspect.exe - Entry Point Not Found---------------------------The procedure entry point SetGestureConfig could not be located in the dynamic link library USER32.dll. ---------------------------OK   ---------------------------
Followed by another dialog mentioning C:\Program Files (x86)\Adobe\Adobe Edge Inspect\EdgeInspect.exe Edge Inspect has stopped working
More details:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          EdgeInspect.exe
Application Version:          1.0.372.4762
Application Timestamp:          51098b6d
Fault Module Name:          USER32.dll!SetGestureConfig
Fault Module Version:          6.0.6002.18541
Fault Module Timestamp:          4ec3e39f
Exception Code:          c0000139
Exception Offset:          0006f52f
OS Version:          6.0.6002.2.2.0.256.6
Locale ID:          1033
Additional Information 1:          9d13
Additional Information 2:          1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3:          9d13
Additional Information 4:          1abee00edb3fc1158f9ad6f44f0f6be8
I tried googling but I haven't found any solutions, so I thought I'd ask for help here.

No, there is no timeline like that. Vista support for any product will vary from team to team depending on a huge variety of factors.
For us, we're not even sure why it no longers works on Vista. As I said above, it could be a recent change we made or a change in one of the libraries we use with the desktop application. The solution is nowhere near as simple as posting the older version of the desktop application. Edge Inspect is a system of multiple pieces that all have to work together and be able to communicate with each other. Even if we posted the older version of the desktop piece, it's likely that you'd find Edge Inspect features that didn't work because the other pieces no longer spoke to it correctly. It would get progressively worse with each release until it stopped working entirely. And we simply don't have the resources to support a Vista version of the desktop application and keep it up to date with all the other pieces of the application.
We never devoted any of our limited dev or testing resources to testing on Vista and can't start doing that now. In our original FAQ we noted that it was not supported but that we didn't know of any issues with Edge Inspect running on Vista. That's now changed. I've updated the FAQ, and we'll be modifying the installer to reflect the new situation.
I'm sorry, but the final word from engineering and product management is in, Edge Inspect does not support Vista.

When I start my computer the following error: AppleSyncNotifier.exe Entry Point Not Found Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help

Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!

SAP 7.1 Error - saplogon.exe - Entry Point Not Found

'The procedure entry point CleanUp could not be located in the dynamic link library convlib.dll'
The above error is received when SAPLogon Icon is clicked.
I installed SAP 7.2 and then removed it and installed SAP 7.1 and then unfortunately tried this install/uninstall a number of times, and in some instances because it was taking so long I think my session cancelled on me during the installations.
However, in the end I tried installing SAP 7.1 and the following errors were reported in a log:
File Install The system cannot find the path specified. C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SapGui\sapdatap.ocx C:\Program Files\SAP\FrontEnd\SapGui\sapdatap.ocx -2147024893
File Install The system cannot find the path specified. C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SapGui\sapcltfc.ocx C:\Program Files\SAP\FrontEnd\SapGui\sapcltfc.ocx -2147024893
File Install The system cannot find the path specified. C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SAPgui\SAPfewut.dll C:\Program Files\SAP\FrontEnd\SAPgui\SAPfewut.dll -2147024893
When I looked into this it appears that the install was trying to write to the following destination paths:
C:\Program Files\SAP\FrontEnd\SAPGui\
C:\Program Files\SAP\FrontEnd\SapGui\
C:\Program Files\SAP\FrontEnd\sapgui\
The only directory that is present on my drive is:
C:\Program Files\SAP\FrontEnd\SAPgui\
All the files that it says are missing are present but maybe the SAP Logon.exe maybe looking for the above path variants.
However when I try to create a new path with say SapGui, it asks to merge with SAPgui and does not create a new path.

Good Afternoon -
If you are not working in a Citrix environment, and you are sure that the client has administrator access on the desktop on which you are working. I would recommend the following:
1. Shut down SAP Logon - In the service tray, right click on the SAPLogon icon and select "Shut Down SAP Logon"
2. Uninstall ALL versions of SAP GUI - If you go to control panel --> Programs and features --> Look for "SAP GUI for xxx" and uninstall all occurences (There should be only 1)
3. Open Windows explorer, and navigate to "c:\Program Files\SAP", then delete folder "FrontEnd"
4. Download the desired version of SAP GUI for Windows you require
5. Install using the standard windows install procedure
Please be advised, that support for SAP GUI for Windows 7.20 will be stopped soon, and you will have to upgrade to SAP GUI for windows 7.30. See SAP Note :
https://service.sap.com/sap/support/notes/147519
You should start planning the upgrade to release 7.30 as soon as possible since SAP GUI for Windows 7.20 will be out of maintenance as of 9th of April 2013.
regards,
Ronald Meyer

Error Acrobat.exe - entry point not found the prodedure entry point PropVariantToString could not be located in the dynamic link library Propsys.dll

when trying to save a file which I changed, the file will not save and I receive the following.
the prodedure entry point PropVariantToString could not be located in the dynamic link library Propsys.dll
New Windows 7 computer, new Acrobat standard installation.
How do I fix this?

Hi Kathie,
Does this happen with a specific file?
Have you tried updating Acrobat to the latest patch v11.0.09 and checked?
Please try repairing Acrobat from the 'Help' menu and check if you still face the issues.
Regards,
Rave

Photoshop.exe entry point not found

any ideas please?

Nobody can tell you anything without proper system information and other technical details like the crash logs. Entry point errors usually point to incompatible drivers or missing system libraries.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

Photoshop.exe - Entry Point Not Found error

I updated Photoshop and Bridge CC last night. Afterwards, I was unable to open up Photoshop CC getting this error message. The box has a lot of jibberish but ends with "could not be found in the dynamic link library PatchMatch.dll
I can however open up Lightroom and ask it to Edit in Photoshop and it opens up doing it that way. I have Windows 7 64 bit and had never had a problem until last night.

So you're suggestion going thru Windows Control Panel to uninstall it. Then I can re-install it thru the Adobe Creative Cloud? Thanks for you reply. It did occur to me that it might be an installation problem but just wanted to get an additional opinion.

Error : Photoshop.exe - Entry Point Not found

Similar Messages

Maybe you are looking for