Error Plant is not available, Error OX17

Hello Experts,
I have an error in OX17, when I check for the Purchase org which one is the plant, Ii shows the plant is not available. I already check OX18, OX08, I check all the org structure. Please help. Did I miss somthing? What I doing wrong?
Thanks experts

Hello,
You can have following purchasing organisation plant specific purchasing organisation.
Under plant specific purchasing organisation you have make following customization in IMG
Assign purchasing organisation to company code
Assign just one plant just one plant of compnay code to this purchasing organisation.
For cross plant purchasing organisation i.e purchasing organisation responsible for procuring material for several plants of a compnay code, then you must assign aal the plants to that purchasing organisation. In this case assignmen t to compnay code is not manadatory.
For Cross compnay code purchasing organisation i.e. single purchasing organisation procures for several pnats belonging to different compnay codes, then in that case you must not assign purchasing organisation to any of the cmpany codes. While creatring purchasr documents you get a pop up from SAP asking for compnay code entry.
Note : Assignmen to company code is only manadatory for plant specific purchasing organisation beloning to same code code..
Br,
Tushar

Similar Messages

ORA-29278: SMTP transient error:421 Service not available error?-V.Urgent

Hi All,
I am trying to use utl_smtp for sending mails.
1. I am not able to set SMTP_OUT_SERVER for scope =Both,i can use only SPFILE, Why?
alter system set smtp_out_server = '<ip-address:port' scope=Both;
my server ip address 172.16.1.10 and port-25
2. I am using oracle 10g Rel1 database.
3. I am using UTL_MAIL.SEND_ATTACH_RAW procedure for sending mail with attachment.
Please help me as i tried so many things but no luck.
This is very urgent.
Thanks in Advance.

Urgent is it?
What makes you believe that your request for help is more important than someone else who has requested help? It's very rude to assume you are more important than somebody else, and I'm sure they would like an answer to their issue as soon as they can get one too, but they've generally been polite and not demanded that it is urgent.
Also, you assume that people giving answers are all sitting here just waiting to answer your question for you. That's not so. We're all volunteers with our own jobs to do. How dare you presume to demand our attention with urgency.
If you want help and you want it answering quickly you simply just put your issue forward and provide as much valuable information as possible.
You will find if you post on here demanding your post is urgent then most people will just ignore it, some will tell you to get lost, and some will explain to you why you shouldn't post "urgent" requests. Occasionally you may find somebody who's got nothing better to do who will actually provide you with an answer, but you really are limiting your options by not asking properly.
Looking at your question:
1. I am not able to set SMTP_OUT_SERVER for scope =Both,i can use only SPFILE, Why?Why indeed? What problem are you actually having? Is it giving you an error? If so, what is the error?

ITunes Error - Itunes Store not available error -9813

Does anyone know what this means.
I have tried downloading the new Software for my Iphone 3g, this had downloaded and iphone was in the process of backing up/Synching.
For some reason this stopped and now i cant get into my iphone, it just has te itunes screen on the phone.
Anybody Help.......

Are you using Custom claim provider??
If you are then try this:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://www.chapmanconsulting.ca/post/2010/04/23/The-Case-of-the-Failing-SharePoint-2010-FBA-Configuration.aspx
#RoHsTr

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

ASE instance not available *** ERROR:ASE instance possibly left running when system went down(system crash?). Notify Database Administrator

Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
Piyush

Hi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A

Facetime is not available error message, any suggestions?

facetime is not available error message, any suggestions?

Hi ftruseljr,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Judy

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Bluetooth not available error

I got a early 2008 MAC PRO with additional wireless keyboard and mighty mouse few weeks ago.
Recently I keep encountering the "bluetooth not available" problem after software update (system reboot) if I have USB devices attached to the MAC PRO. Also, if I connect the Logitech quickcam ultravision directly to the MAC PRO, the bluetooth will have "not available" error after system reboot. If I connect the quickcam to the USB HUB, the problem won't happen.
This error happened again when I install the new Safari update while I have the keyspan USB-to-Serial connected to the MAC PRO.
I have all the latest updates installed in my MAC PRO. I don't know what happened, but I hope this problem can be fixed so that I don't have to keep unplugged all my USB equipment if I need to reboot my MAC PRO.

Hi there,
I just had the exact same thing happen! I had my usb 2 flash stick and MyBook 320HD only. I then noticed that the MyBook wouldn't sleep even though the Mac was shut down. I had to force shut off the drive by removing the power lead. I restarted the Mac with no usb whatsoever and voila! All is now ok.. I wonder if this is connected with the motherboard power management??

"Youtube not available" error on my video

I uploaded a video last night to YouTube. I can access it from the YouTube app on my phone only if I am signed in and go to "My Videos". But if I try to open it using a link to the video, I get a "Youtube not available" error. I've gotten 3 other people with iPhones to try it, with the same result. I made sure the option to play on mobile devices was checked within the video settings. What else can I do? I have no idea why this isn't working.

What else can I do?
Don't use Youtube.
It is Youtube not iPhone.
Youtube is very buggy (The most famous bug is the inability to post a text comment).
These work better.
http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
http://www.youtubealternative.com/

Stereo Not Available Error !

Hello all,
I used to get stereo to work with shutter glasses on my
WinNT machine. But, today I installed a newer version of
Java and Java3D and stereo stopped working. It gives
me "Stereo not available" error. I tested my shutter
glasses with another example (not Java3D) and they are fine.
Java version: SE v1.4.1_02
Java3D version: 1.3.1-beta (OpenGL) SDK
Please tell me if anybody had the same problem and if it is
because of the java versions. If not do you have any suggestions?
By the way I am trying to run the example program under
demo\java3d\PureImmediate\PureImmediate.java
Thank you,
Tina

hum, it is perhaps because you installed a beta version of java3d... By definition, you can't expect a beta version to work fine.

"connection not available error code - 4161" what...

Hi
I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
Thanks

I did a comparison, and your connection string is different
than mine. Mine does not show any password/userid entries, but
perhaps that's the difference between using SQL and SQL Express.
(I'm using SQL.) I am, of course, assuming that you have actual
values for "servername," "database," etc.
Given that you can't get in from RSC Explorer, it would seem
that either you are not using the same userid/password as the one
you set up for the administrator when you created the DB, or else
there's something wrong with the DB itself.
Try creating a test DB. Be careful to specify the same
administrator name and password as the login you use to get on the
RSC server. After you've created the test DB, open it up from RSC
Explorer. If you can do this successfully, then everything ought to
be working OK. From that point, I'd start over and create a new DB,
and upload to that one. (In fact, I've actually gone through
exactly that total exercise before.
G

Direction Not Available Error -ios6

Maps are not working on my iphone4 after ios6 upgrade I am getting "Direction Not Available" error even though it is able to search the place if I just give search. I was using maps successfully with ios5. Please let me know what is the solution.

I am also facing the same prob..in UAE. is there any solution?

'Bluetooth not available' error message since upgrading to Leopard

Hi, I regularly seem to get a 'Bluetooth not available' error message since upgrading to Leopard, any ideas why, have to reboot to shake it.
cheers
Simon

I solved the same issue by resetting the SMC. With the computer off, remove the battery and press and hold the power button for 5 seconds. Then reinstall the battery and restart. I haven't had any bluetooth issues since.

Cron service not available error

A production issue appeared today at one of our customer
sites.... and I am unable to login to CFadmin. I stop and restart
the services, but still the same issue appears. See below.
Anyone have any thoughts? Ideas? Has anyone ever seen this
before??
Error Occurred While Processing Request
The Cron service is not available.
This exception is usually caused by service startup failure.
Please check your server configuration.
The error occurred in Application.cfm: line 78
-1 : Unable to display error's location in a CFML template.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2;
SV1; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
Date/Time 25-Apr-06 12:57 PM
Stack Trace (click to expand)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
coldfusion.server.ServiceFactory$ServiceNotAvailableException:
The Cron service is not available.
at
coldfusion.server.ServiceFactory.getCronService(ServiceFactory.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
coldfusion.runtime.java.JavaProxy.invoke(JavaProxy.java:74)
at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1627)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.CfincludeFilter.include(CfincludeFilter.java:33)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:157)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

I'm receiving the exact same error as the original post. We tried every suggestion on this forum and still get the 'cron service not available' error. I've also checked and we don't have a neo-cron.xml file. We are using Coldfusion 8.
The Cron service is not available.
This exception is usually caused by service startup failure. Check your server configuration.
The error occurred in Application.cfm: line 84
Called from Application.cfm: line 4
Called from Application.cfm: line 1
-1: Unable to display error's location in a CFML template.
Any help will be appreciated. Thanks.
Crystal

Error Plant is not available, Error OX17

Similar Messages

Maybe you are looking for