Error please help!!! Internal failure error no.:0x80040707

I only just got an ipod nano and when i put the disc given with the ipod on the computer this comes up:
Internal failure
Error Number : 0x80040707
Description:
Then this comes up:
Ipod for windows 2005-09-23
Access is denied
Some one help please!!

are you the administrator on this XP account?

Similar Messages

PLEASE HELP - Component Failure - Customer Relations e-mail

To whom it may concern:
I've been trying to reach someone from customer relations, but there is not an email in the web site and the call center is not very efficient. I'm in Caracas, Venezuela and I've been having problems with my 800 MHZ iBook. The computer experienced the following symptoms:
- Scrambled and distorted video
- Appearance of unexpected lines on the screen
- Intermittent video image
- Video freeze
- Computer starts up to blank screen
An authorized Service Provider determined that the component failure identified for the Expanded iBook Logic Board Repair Extension Program affected my computer.
In order to make the arrangements for the repair, the AASP needs the invoice of the purchase, which I don't have because I did it over the Internet and my father in law brought it to me from the US.
I have the web order number, the billing and shipping info, and the computers serial number. I'm hopping that Apple can send me a copy of the invoice so I can proceed with the Repair Extension Program, but it has been impossible to speak to any customer relations representative, or find an email address in the web site.
Please, please ,please, I need an email address of customer relations.
I would really appreciate any information you can give me.
Thank you in advance.

Veronica
Call 1-800-MY-APPLE, select the appropriate option, give the customer service representative your web order number, phone number or e-mail address, and they can pull the invoice up and e-mail you a copy. I'm a newbie too, so go easy on me.
Bert

Internal Failure - Error Number 0x80040707

Hi
I recntly was playing on my computer and when i tried to move songs to my ipod i got an error saying that the ipod could not be updated. i backed up all of my music and ininstalled itunes. i tried to reistall itunes and when the installation bar comes up i get an error message Internal Failure
Error Number:0x80040707
Description:
Can someone help. i can't use itunes now and my ipod is empty.

Hi there! Thats a common error message. Try this and see if it works:
1. Run the setup program and PAY ATTENTION to the folder where you are installing the software. Keep clicking on the "Next" button and here it is, the progress bar.
2. When the progress bar reaches 100% and you get the 0x80040707 error message, DO NOT click "Accept" or "Ok" or whatever says the button in the error window. Instead proceed as I describe:
3. Go to the the folder where the program is supposed to be installed. Yes, it's there!. Copy this folder to another location (for example, to the desktop).
4. Now click "Accept" or "Ok" in the 0x80040707 error window. This will erase almost every file in the folder where the program was originally installed. Who cares? You have a copy of it.
5. Now overwrite this almost-empty original installation folder with the one you backuped.
6. If you want you can even create manually a shortcut of the EXE file that launches the software wherever you like. Double click it. Does it work?

Error 500--Internal Server Error.PLEASE   HELP .

hi,
I am using BEA weblogic server 9.0.i created a new domain named myproject.I have created directory mywebapp under applications dir.
i.e C:\bea\user_projects\domains\myproject\applications\mywebapp
I have placed my servlet class in :
C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes\Mypackage
I deployed my apllication mywebapp using admin console.
when i run the program in the browser,i get this error:
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][weblogic.servlet.internal.WebAppServletContext@17e5fde - name: 'mywebapp', context-path: '/mywebapp']: Servlet class HelloServlet for servlet myHello could not be loaded because the requested class was not found in the classpath C:\bea\user_projects\domains\myproject\applications\mywebapp\WEB-INF\classes.
java.lang.ClassNotFoundException: HelloServlet.
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:497)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:234)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:2970)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1888)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1810)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1274)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:167)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:139)
what should i do?please help me.
bye

you are reason our error is slightly different is
Error 500--Internal Server Error
javax.servlet.ServletException: [HTTP:101249][ServletContext(id=21255917,name=BonusRoot,context-path=/BonusRoot)]: Servlet class Beans.BonusServlet for servlet BonusServlet could not be loaded because the requested class was not found in the classpath C:\bea\weblogic81\samples\domains\workshop\cgServer\.wlnotdelete\essai\war-ic.war.
java.lang.ClassNotFoundException: Beans.BonusServlet.
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:799)
     at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:518)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:362)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
We have try with your proposition but we find the same error
we must request servlet??? because i've one
package Beans;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
public class BonusServlet extends HttpServlet {
CalcHome homecalc;
public void init(ServletConfig config) throws ServletException{
//Look up home interface
   try {
     InitialContext ctx = new InitialContext();
     Object objref = ctx.lookup("calcs");
     homecalc = (CalcHome)PortableRemoteObject.narrow(objref, CalcHome.class);
   } catch (Exception NamingException) {
     NamingException.printStackTrace();
public void doGet (HttpServletRequest request,
     HttpServletResponse response)
     throws ServletException, IOException
    String socsec = null;
    int multiplier = 0;
    double calc = 0.0;
    PrintWriter out;
    response.setContentType("text/html");
    String title = "EJB Example";
    out = response.getWriter();
    out.println("<HTML><HEAD><TITLE>");
    out.println(title);
    out.println("</TITLE></HEAD><BODY>");
    try{
    Calc theCalculation;
//Retrieve Bonus and Social Security Information
   String strMult =
           request.getParameter("MULTIPLIER");
   Integer integerMult = new Integer(strMult);
   multiplier = integerMult.intValue();
   socsec = request.getParameter("SOCSEC");
//Calculate bonus
    double bonus = 100.00;
    theCalculation = homecalc.create();
    calc = theCalculation.calcBonus(multiplier, bonus);
    }catch(Exception CreateException){
       CreateException.printStackTrace();
//Display Data
    out.println("<H1>Bonus Calculation</H1>");
    out.println("<P>Soc Sec: " + socsec + "<P>");
    out.println("<P>Multiplier: " + multiplier + "<P>");
    out.println("<P>Bonus Amount: " + calc + "<P>");
    out.println("</BODY></HTML>");
    out.close();
public void destroy() {
    System.out.println("Destroy");
}Help us please
Thanks

HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

500 Internal Server Error again pleas (including log file)..please help

1. After i unziped and installed jdeveloper to:
C:\Jdevstudio successfully
2. Then i created the untitled1.jsp page ---> only showed Hello world and save
3. the Embedded OC4J Server compiled successfully ..i thought this meant nothing wrong with the code.
Successful compilation:0 errors, 0 warnings..
4. But when i looked into the Embedded OC4J Server-Log
i found the error :
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
14 ส.ค. 2551 15:30:33 com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 7813 ms.
Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
51/08/14 15:30:38 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
This caused 500 Internal Server error
5. Then i went to Tools--> Preferences--> Deployment--> unchecked Bundle Default data-source.xml During Deployment...
I got less error showing:
C:\Jdevstudio\jdk\bin\javaw.exe -jar C:\Jdevstudio\j2ee\home\admin.jar ormi://144.124.120.45:23891 oc4jadmin **** -updateConfig
14 ส.ค. 2551 15:33:58 com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl preInitApplicationServer
WARNING: ORB ignoring configuration changes. Restart OC4J to apply new ORB configuration.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 8109 ms.
Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
This still caused 500 Internal Server Error
6. I still did know the real problems then i read the installation guide of jdev
is it necessary to set the JavaHome in C:\Jdevstudio\jdev\bin\jdev.conf
or do i need to set ORACLEHome in this file
7. from the log file the server called Jdk under Jdevstudio\jdk\bin\javaw.exe -jar
it seemed fine...
8. Anything wrong with admin.jar....
9. is the problem from setting not setting jdk (javahome) or admin.jar...or OC4J problems please help
i would appreciate you help
thank you

i deleted pesistence directory like what you said but i found the bigger error in the log ...
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
14 ส.ค. 2551 17:05:46 com.evermind.server.jms.JMSMessages log
SEVERE: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
java.lang.InstantiationException: The system cannot find the path specified
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1072)
     at com.evermind.server.jms.JMSUtils.toInstantiationException(JMSUtils.java:1237)
     at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1831)
     at com.evermind.server.jms.JMSServer.internalSetConfig(JMSServer.java:209)
     at com.evermind.server.jms.JMSServer.setConfig(JMSServer.java:182)
     at com.evermind.server.ApplicationServer.initializeJMS(ApplicationServer.java:2412)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:955)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.IOException: The system cannot find the path specified
     at java.io.WinNTFileSystem.createFileExclusively(Native Method)
     at java.io.File.createNewFile(File.java:850)
     at com.evermind.server.jms.ServerFile.safeOpenFile(ServerFile.java:775)
     at com.evermind.server.jms.ServerFile.access$000(ServerFile.java:77)
     at com.evermind.server.jms.ServerFile$2.run(ServerFile.java:719)
     at oracle.oc4j.security.OC4JSecurity.doUnprivileged(OC4JSecurity.java:325)
     at com.evermind.server.jms.ServerFile.openFile(ServerFile.java:716)
     at com.evermind.server.jms.ServerFile.<init>(ServerFile.java:133)
     at com.evermind.server.jms.PersistentMap.loadFile(PersistentMap.java:100)
     at com.evermind.server.jms.PersistentMap.<init>(PersistentMap.java:61)
     at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1823)
     ... 6 more
51/08/14 17:05:46 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
14 ส.ค. 2551 17:05:46 com.evermind.server.ServerMessages severeJmsServerStartupException
SEVERE: JMS: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 7719 ms.
Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
51/08/14 17:05:50 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
anything problems that came from admin.jar..????

NOKIA N80 Internal Error Message PLEASE HELP

Does anbody Know why I Get an Internal Error Message When I Send a Multimedia Message.... Everytime I Try to Send a Picture as Multimedia it Says Unable to Send Message and When I Click Details it Says Internal Error....... Please Help

-----
I thought maybe it was the site itself. Then I tried it with another site and the same problem
well, thanks for that info -- considering this I can´t help suspecting that your ADDT (or Dreamweaver) installation might be broken. For a start I suggest to uninstall/reinstall ADDT first and see if this solves your issues
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Receiver Determination Not found Internal Error...Please help me

Hi Gurus..
I have done a file to File scenario and when i test my scenario i am getting this error
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://sapserver:8001/sap/xi/simulation?sap-client= User: PIDIRUSER
So please please help to solve this problem.

Hello,
Seems that you should configure the RFC Destinations and also
maintain the correct password, which should be the SAME, for all
the service users.
Refer to note below according to your system version:
PI 7.1:
#999962 - PI 7.10: Change passwords of PI service users
XI 7.0
#936093 - XI 7.0: Changing the passwords of XI service users
XI 3.0
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

Internal software error cpp, line 214 - creating subtitles failed / please help

Hello,
it a pretty toutgh expierience trying to create my first dvd with Adobe,
I have to hand it over this Friday, in some 12 hours,
and there is another issue I have to cope with:
1. I have the project ready, I check for errors and there are no.
2. My project has 2 two timelines (movie and soundtrack) and subtitles in 7 languages. All already transcoded.
3. I press build DVD.ISO and here comes the wonderful Adobe greeting: Internal software error. File Spec: cpp, line 214. I clik ok and the other window appears happilly informing me that creating subtitles failed. And creating of thesee subtitles was the only reason I started using Adobe Premiere Pro and Encore
Could you please help me, I am going slightly crazy with it. How can I resolve this issue. I tried to look at the forum, but did not find the solution. Neither @ google.
Best regards,
Michal

Thanks a lot Stan !
I did two timelines, since I wanted to give the possibility to listen to the music track, without watching the movie. No idea if this could be done in one timeline (I am just starting my Adobe adventure .
Coming to the point, I fixed it. Here is how:
1. While building DVD the message was: Internal software error. File Spec: cpp, line 214. and creating subtitles failed.
2. I tried to make really big spaces between subtitles, as well as change the fonts, the kerings, etc. - to no avail.
3. I deleted all the subtitle text (marking it with the mouse and pressing delete), but leaving all the subtitle tracks, since I did not want to link them all again to the subtitle menu buttons.
4. For each subtitle track I imported the subtitle text once again.
And it worked! So simple if one already knows how to do it.
Thanks for help anyway, you and others at this forum helped me a lot during the whole project (missing Encore library, baddriver.txt to mention the most critical issues).
Best regards,
Michal

PLEASE HELP !! Error: The underlying task reported failure on exit.

Last night, I looked at "Get Info" for the "Macintosh HD"
At the very bottom of the window are listed Permissions, that consisted of (1) Owner, (2) Admin, (3)Everyone.
I had the idea that if I REMOVED "Everyone" by selecting it and hitting "-", I could better secure access to the "Macintosh HD".
Well, now the G5 starts its boot up routine and stalls at the gray screen with pinwheel spinning.
1. I tried purging the P-RAM... no change.
2. I tried doing a "Safe Boot", didn't do anything, couldn't get it to boot up beyond gray screen.
3. Booted up from Leopard CD, and ran "Verify Disk" with the result message that "the volume Macintosh HD appears to be OK"
4. Ran "Repair Disk" with the result message that "the volume Macintosh HD appears to be OK"
5. Tried to run "Verify Permissions" with the result message "Error: The underlying task reported failure on exit. Permission verification complete"
6. Tried to run "Repair Permissions" with the result message "Error: The underlying task reported failure on exit. Permission verification complete"
I assume that my stupidly removing "Everyone" from the permissions list of "Macintosh HD" is the cause.
HELP !!!! IS there an easy way to restore the Permissions to where they were before ????
PLEASE HELP.
THANKS !!!!

I think chmod 1775 sets the sticky bit.
To get more details on what chmod does, do 'man chmod' from the command line. There are man pages for most of the command-line UNIX tools.
BTW, I don't think changing the permissions at the root of the hard drive is the best idea
This is one case where 'repair permissions' might help as well. Once booted into a shell you can do 'sudo diskutil repairpermissions /'

Internal Error Occured with time split...please help

Hi All,
During delta data load to the cube I am getting error 'Internal Error Occured with time split' in processing and data is coming till PSA and got error in PSA.There is no field found that is time dependent and I am unable to fix it in PSA by editing data too.
Please help me out.
Thanks in advance.

May be the infoobject you used to derive the date/time field is not the correct one. I will double check that mapping. Also, it may be worth looking at the following thread.
Internal error occured with time split
Regards.

Internal rpc error (error code:2). Please help.

Our Oracle database is on Solaris 9. When we do stress testing on database and server. We have got this error message.
Monitor name :UNIX Resources. Internal rpc error (error code:2).
Hint: Check that RPC on this machine is up and running. Check that rstat daemon
on this machine is up and running (use rpcinfo utility for this verification).
Details: RPC: RPC call failed.
RPC-TCP: recv()/recvfrom() failed.
RPC-TCP: Timeout reached. (entry point: Factory::CollectData). [MsgId: MMSG-47197]
The error appears randomly when number of users querying database increases to high number.
Please help me to figure out the reason and solutions. Thanks in advance.

consider the following
not for copying
but for studying working code
to help clarify ideas
import java.io.*;
list items and count of each item
in a list of socks
file has list of socks ...
4
red sock
green sock
blue sock
green sock
the first line is n = count of socks
if no socks match, there are n items
for example : 3 items in ...
3
red sock
blue sock
green sock
if all socks match there is one item
for example : 1 item in ...
3
red sock
red sock
red sock
if socks come in pairs, there are at most n/2 items
for example : 2 items in ...
4
red sock
green sock
red sock
green sock
program does not assume that socks come in pairs !!
public class Socks {
public static void main(String args[]) throws IOException
String[] socks = new String[1000];
int numOfsocks;
String[] item = new String[1000];
int[] count = new int[1000]; // initializes each count to zero
int totalcount = 0;
int i;
int j;
boolean ifound;
FileReader fr = new FileReader("test.txt");
BufferedReader inFile = new BufferedReader(fr);
numOfsocks = Integer.parseInt(inFile.readLine());
for (i = 0; i < numOfsocks; i++)
socks[ i ] = inFile.readLine();
inFile.close();
for (i = 0; i < numOfsocks; i++) {
ifound = false;
for (j = 0; j < totalcount; j++) {
if (socks[ i ].equalsIgnoreCase(item[j])) {
ifound = true;
count[j]++; // increase count for matched item
break; // exit "for j loop"
} // for j
// sock not found so add it to item list ...
if (ifound == false) {
item[totalcount] = socks[ i ];
count[totalcount] = 1;
totalcount++;
} // for i
for (i = 0; i < totalcount; i++)
System.out.println (item[ i ] + ", count = " + count[ i ]);
} // class

I updated my itunes and now every time i try to play a song 'internal error' shows up and itunes quits. Please help me....

I updated my itunes and now every time i try to play a song 'internal error' shows up and itunes quits. Please help me....

Hi Dance4Life85!
I have a couple of troubleshooting suggestions for you regarding this issue. First, I would suggest that you reinstall iTunes, according to the instructions in this article:
OS X Mountain Lion: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH11201
To reinstall iTunes, download it from the Apple Downloads website.
Apple Downloads website
Note that all you will need to do is download iTunes and install it again, it will install over the version that is on your computer right now without issue. If your issue persists, you may want to see this article about troubleshooting third-party plugins for iTunes:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
Lastly, if neither of these resolve the issue, then you may need to recreate your iTunes library. More information on this can be found here:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Internal Error 2739, Please Help!!!

When trying to install Fireworks CS3 Trial on my Windows
Vista-based PC, I get error code 2739. I contacted customer support
and they said that being this a trial software, that there is no
support avaiable. I don't understand why they wouldn't want to help
a potential customer. Can someone please help me?
Thanks in advance,
Michael A.

:)
http://davidgardiner.blogspot.com/2007/02/internal-error-2739-on-vista-x64.html
alex
Alex Mariño wrote:
> This might help:
>
>
> rcmadiax wrote:
>> Anyone?

After a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.

Error please help!!! Internal failure error no.:0x80040707

Similar Messages

Maybe you are looking for