Error "Please use the Latest SAP GUI version" in service admin
Hello everyone,
I have successfully installed ITS 6.20 & We are using ECC 6.0, But when I try to logon to the Admin service. I gives an error message saying <b>"Please use the Latest SAP GUI version"</b>.Please help me solve this problem.
Regards
Subramanya
Hi,
several instances of ITS 6.20 have to be mapped either to
a) different TCP/IP ports or
b) if the same TCP/IP port should be used they have to have an individual hostname.
These settings have to be defined correctly in ItsRegistryWGATE.xml.
Please have a look at this thread for further information:
Re: How to register agates with the ADMIN instance
You could also search within this forum for the keyword "ItsRegistryWGATE.xml" or do a SAP Notes search to get more information.
Also please read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/211cc811f21a74e10000000a1553f6/frameset.htm">ITS Administrator's Guide</a>
Best regards
Henning
Similar Messages
-
Hi,
I have installed Solaris studio and wanted to use the memory analyzer from there. I am trying it on a sample program, but it returns the above error and does not instrument the executable. Could you please help me tracing where am I going wrong.
# which cc
/opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc
# /opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc -V
cc: Sun C 5.12 SunOS_sparc 2011/11/16
# cc -g -O2 test.c
# file a.out
a.out: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped
# ldd ./a.out
libc.so.1 => /usr/lib/libc.so.1
libm.so.2 => /usr/lib/libm.so.2
/platform/SUNW,Sun-Blade-1500/lib/libc_psr.so.1
# /SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/discover -w - ./a.out
discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.
Regards,
Vikkalok. Thanks for the info.
Could you check if a small test works on your system ?
You could use this test :
% cat a.c
#include <stdio.h>
#include <stdlib.h>
int main()
int *x = (int*)malloc(100);
printf("x[0]=%d\n", x[0]);
return 0;
% cc a.c -g -xannotate
% discover -w - -o a.out.disc a.out
% ./a.out.disc
ERROR 1 (UMR): accessing uninitialized data "*x" at address 0x8090008 (4 bytes) on the heap at:
main() + 0xc2 <a.c:8>
5: {
6: int *x = (int*)malloc(100);
7:
8:=> printf("x[0]=%d\n", x[0]);
9:
10: return 0;
11: }
_start() + 0x71
was allocated at (100 bytes):
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
x[0]=0
***************** Discover Memory Report *****************
1 allocation at 1 location left on the heap with a total size of 100 bytes
LEAK 1: 1 allocation with total size of 100 bytes
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
DISCOVER SUMMARY:
unique errors : 1 (1 total)
unique warnings : 0 (0 total) -
I need to to install the latest SAP GUI
Hello
I need to to install the latest SAP GUI
Please give me the link
ThankHello Aleks,
please have a look at the announcement threads sticking at the top of the forum about the latest SAP GUI.
Best regards
Rolf-Martin -
Can anyone point me to where I can find the latest SAP GUI (7.10?) . I have just been given a laptop with no CD drive, and I don't have my memory stick with me at the moment. Anyone?.
GaryHi,
service.sap.com -> software download -> sap installation and upgrades -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE -> Installation -> 50095979_4 NW 7.0 Presentation - 7.10 Compilation 4 Present. 1/2
Let us know if this information is useful to you
with regards,
Parin Hariyani -
Using the HTML SAP GUI inside the Enterprise Portal?
Hello everyone
In our company we plan to set up the SAP Enterprise Portal (NetWeaver 7.0). The first application we want to provide inside the portal is the SAP GUI that connects to our SAP ERP 2005 system via single sign on. Therefor two different approaches exist:
1: Using the standard SAP GUI inside a portal iView. In this case every client pc needs the SAP GUI installed.
2: Using the HTML SAP GUI. In this case we have to set up the integrated ITS in our SAP ERP system.
Now I have some questions about the second approach. Is the functionality of the HTML GUI equal to the functionality of the standard GUI? If not, what are the restrictions? How high is the additional load on the network and SAP ERP system caused by the HTML GUI? Would you recommend this approach for a system with more than thousand SAP users?Hi Marc,
At least if you consider using webgui, you should test the transactions properly as there are some issues for example with scandinavian characters and lines visible in lists of search helps.
Also you might want to consider the limitations of the screen resolutions and space which the portal framwork already takes from the gui. This of course is a topic for both HTML/SAP GUI's.
Kind regards,
Ville -
Where do i get the latest SAP GUI
Hi All,
Where can I download the latest version of SAP GUI?
Regards,
XIerHi,
SAP GUI Family
Please note that you need to have an OSS user id and password to access the sap website. As a Basis person, your company should have assigned one for you.
http://service.sap.com/installations
--> Entry by Application level group
--> SAP Frontend Components
--> SAP GUI FOR WINDOWS
--> SAP GUI FOR WINDOWS 6.40
--> Installation
For the SAPGUI-Patches:
=======================
http://service.sap.com/patches
--> Entry by Application level group
--> SAP Frontend Components
--> SAP GUI FOR WINDOWS
--> SAP GUI FOR WINDOWS 6.40
--> Win32
Thanks
swarup -
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.
I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole. -
Hello, iam using the latest version of firefox, whenever i login into my yahoo mail account i get a stop script error, the details of the error script is mentioned below , please suggest how to stop this
the website is www.mail.yahoo.com. i was getting the same STOP script error every now and then in firefox 6 as wellI have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I cannot open iPhoto. The error reads: "You can't open your current iPhoto library using this version of iPhoto.
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version."
But, I don't ever recall doing that, and I need to access my iPhoto. Anyone help?Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
My home was recently burgularized and my Intel MacBook Pro was stolen I had a backup but my other computer is a G5 PowerPC running 10.5.8 and I am getting the following error:
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
Obviously I cannot install a newer version of iPhoto on my G5 so what recourse do I have to get my images back?
HelpYou have two options:
Run the Library on a machine that has the same version as the machine that was stolen.
or
Recover the files from this library and start over from scratch.
To recover the files:
Go to your Pictures Folder (or whereever you have the back up) and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Your originals are in the Masters folder.
Note this will only recover your photos as imported from you camera.
Regards
TD -
I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...
iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2 -
I keep getting this message. What do I do? You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
https://itunes.apple.com/ca/app/iphoto/id408981381?l=en&mt=12
-
i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
My itunes doesnt want to accept/disply videos when i drag an drop it onto itunes! i am using the latest version and i am on windows 7! please help!
Same problem here, and but only on my laptop... I tried to add an mp4 file to itunes on there and it wouldn't work, moved the same exact file to my desktop and it worked fine. Both computers are using windows 7.
Maybe you are looking for
-
Problem #1 When our users create a Crystal Report, they save the report definition in a testing folder and their userid is reflected as the owner. If the Administrator then moves or copies the report definition to a u201Cliveu201D folder, the syste
-
Before export (exp) i used to to run this script to recompile all the user objects on 10g. create or replace PROCEDURE DBA_Recompile p_PInstance_ID IN NUMBER -- DEFAULT NULL * Title: Recompile all User_Objects * Descriptio
-
Freight condition value: validate automatic fill in me23n -PO creation
Hi all i have a query. when creating a PO( me23n), few fields gets automatically filled. like, freight conidtions, contidion value, its amount.... etc.. i would like to cross verify whether they are correct. and also know based on what those values f
-
What is the best stylus for macbook pro?
What is the best stylus for macbook pro?
-
Saving Pattern matching information to an array
I am using imaqLearnPattern function to create a template image. According the IMAQ documentation, the pattern matching information is "appended" to the image. But when I try to call the imaqImageToArray function on this template image, it does not g