ERROR: policy does not allow granting permissions at this level outlook

Hi All,
Our users are attempting to send sharing requests to each other via Right Click Calendar | Share | Share Calendar
Availabilty only works fine but Limited and Full Access fails with the error: policy does not allow granting permissions at this level.
I can see that the default sharing policy is set for availabilty only so I assume I need to add our internal SMTP addresses to the sharing policy with increased right's.
But... From our testing in our LAB we found that if the exchange org does not have a connection to the federation setup it works fine straigh out of the box.
Does this sound right or is my LAB just messing with me?
Cheers
Josh

Hi VK, looks like these threads should resolve your problem:
Assembly does not allow partially trusted
callers                        
"That assembly
does not allow partially trusted callers."                        
That assembly does not allow
partially trusted callers                        
Assembly does not allow partially
trusted callers.                        
WPF Assembly does not allow
partially trusted callers
cameron rautmann

Similar Messages

  • Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

    I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
    log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.  I've added the user to both System Administrator
    and System User roles to try to get it to work but still no luck.
    Does anyone know how to fix this?
    Thanks.

    Hi MetronM,
    The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
    of related tasks.
    You can refer to the following steps to assign corresponding role to the user.
    Open report manager.
    Click “Folder Setting” button. 
    Click “New Role Assignment” icon.
    Type the user name and select the corresponding role.
    There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
    http://technet.microsoft.com/en-us/library/ms156014.aspx
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • "Your organization's policy does not allow you to share with this recipient." When trying to share calendar within our Org

    Hi,
    Wondering if this is a bug - we have serveral different accepted domains, and our users within our org might have different primary SMTP domains - some @nwtraders.com and some @contoso.com - as examples.
    We had a user today report an issue where they were trying to use the 'share calendar' button in Outlook 2010 and then typed in the SMTP address of someone in our org in the field of whom to share with, but that address had a different SMTP domain
    than the user's (but still in our org).  When she tried to send the sharing request she received a popup stating:
    Calendar sharing is not available with the following entries because of permission settings on your network:
    <intended smtp address>: Your organization's policy does not allow you to share with this recipient.
    I thought it might be related to freeform typing in the address - if I hand type out the address with a valid SMTP address within the same SMTP domain, and press send it works. 
    If I use the address picker, and pick the intended sharing recipient (who's has an SMTP domain that is different that the senders), it works fine. It only seems to have an issue when you manually type out the address and it's not in the same SMTP domain
    as you....
    Could this 'problem' be masked with setting up Sharing policy between all of our authoritative domains?
    Thanks

    Looks like Microsoft has an answer as to whether this is to be expected: http://support.microsoft.com/kb/983062/en-us In my research into this, the error you are receiving is a common thing people have run into and they are all using the solution MS lists
    in their KB article. Hope that helps.
    JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

  • When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

    When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

    Try restarting your computer and your router.
    If there is a specific error code, take a look at this article.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694

  • When replying to an email I get a response that the recipient was rejected by the server because it does not allow relaying, what is this message?

    when replying to an email I get a response that teh recipient was rejected by teh server because it does not allow relaying, what is this from?

    reset the phone
    reset network setting
    remove and re add the account

  • Email error message "does not allow relaying"

    After operating normally for a year, I suddenly cannot send email. The message "...rejected by the server because it does not allow relaying" appears even if I email myself.

    this worked for me....
    FIXED!
    Had the same problem. AOL had been working for months, stopped working for no reason. I checked the settings against aol's instructions and the username was wrong - aol state that the username should not have the @aol.com suffix but it did. The next problem encountered was that the iPad would not let me change the username under outgoing smtp settings. Answer is to do the following:
    Go to settings -> mail ->aol account ->outgoing mail server.
    Turn the primary smtp server off.
    Create a new one for smtp.aol.com with the username without @aol.com at the end and your password.
    The rest of the settings should populate automatically.
    Good luck.

  • PSCONFIG - error - USer does not have permission to perform this action

    After installation fo July 14 CU in the sharepoint 2013 server, getting the below error when i ran the PSCONFIG command.
    "An exception of type System.Data.SQLClient.SqlException was thrown. Additional Exception information: USer does not have permission to perform this action"
    My service accounts have db_Owner, db_SecurityAdmin, public, and SPDataAccess to the CONFIG DB.
    Added the services to the local admin group also.
    I am not sure why i am getting this error.
    Any help is much appreciated.
    Thank u

    Hi,
    Did you run SharePoint configuration wizard after applying
    July 14 CU?
    you need to run the wizard after installing the CU.
    Please remember to click Mark as Answer on the answer if it helps you

  • HTTP GET Error - PI does not allow more than 200 chars in the dynamic URL

    Hi Everyone,
    Scenario RFC <-> PI <-> HTTP (GET).
    PI 7.1, Service Pack 05.
    HTTP Setup > URL Address
    The response comes back from the target server when stuffing the URL path in the communication channel "Path" field.
    /rest?&xml_request=......................................................
    The requirement is to dynamically create the URL in the mapping program. While doing this the interface error out saying the URL exceeds the character limit of 200.
    Any thoughts on this would be highly appretiated.
    Thanks,
    AJ

    Please check Mark's reply
    http://forums.sdn.sap.com/thread.jspa?threadID=1944129

  • Adobe 7.0 error 259 does not allow update

    When I try to update adobe 7.0 I get error 259, "unknown error"

    You will probably not be able to create the port with AA7 in Win7. You might get lucky, but AA7  is not compatible with Win7 and you will have to try. It may be that nothing will work.
    If you get the Adobe PDF printer, but not the port, you may be able to set up the port as a file, rather than the PDF port. Then open the file in Distiller to complete the conversion. You might be able to use watched folders in Distiller to do the conversion process, but only trying it will give you an idea. You may find that nothing works and then your only solution is an upgrade.

  • WSRP : Verfication server does not allowing granting permission

    Hi,
    I am trying to register my provider and step 3 grant access is failing. Browse users/ browse groups shows nothing.
    Any suggestion ?
    Thanks

    Yes I changed the provider to WSRP.
    I am still getting an error when registering.
    Error: An error occurred when attempting to call the providers register function. (WWC-43134)
    An error occured during the call to the WSRP Provider: An error occurred whilst invoking an operation on the Provider
    Java stack trace from root exception:
    java.rmi.ServerException: Internal Server Error (caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method )
    at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
    at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
    at oracle.webdb.wsrp.WSRP_v1_Registration_PortType_Stub.register(WSRP_v1_Registration_PortType_Stub.java:70)
    at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_Registration_PortType.register(OraWSRP_v1_Registration_PortType.java:74)
    (WWC-10001363)

  • Outgoing emails not sending, error 'server does not allow relaying.

    This IPhone 4 is new, I have made sure that all the credentials are correct and the outgoing settings are set up but still the emails won't send.
    I just sold my Blackberry which sends emails better then any other phone, I need this e-mail for work, please help?

    No it is a AOL account, any ideas?

  • After installing trial software from logonkey my macbook will not start up, screen asks for systemcode, but blinks off and on and does not allow input password, after this screen goes to blackm

    screen flashes, asks for password but cannot enter password as it keeps flikkering...  this happened after installing a trial version from the programm 'logonkey'
    screen now returns to black and thus stops the startup

    Logon Key Support

  • HT201320 Server does not allow relaying

    Changed e-mail address with verizon verified the account and cannot input my new e-mail in my iPhone or my ipad. Get same error message on both devices that the server does not allow relaying.

    See if this helps.
    Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Firefox does not allow me to have access to my hotmail suddenly

    Suddenly i am trying to login to my hotmail but Firefox does not allow me to do this because "the webpage is not secure". Error code: sec_error_unknown_issuer
    I have deleted all cookies, but nothing....

    Thanks first of all for your respond.
    "I Understand the Risks" missing. The only options is somethnig like "Get me out of here"...I opened it in a new Frame but its the same...
    Regards

  • R1: tcAPIException: Duplicate schedule item for a task that does not allow multiples.

    Hi,
    I'm struggling with the following task:
    I have to assure an account exists for a given resource. I do provision it with the .tcUserOperationsIntf.provisionObject().
    I've created a createUser task to create the account.
    The task code checks if there is already matching account.
    If no account exists, is is created in the disabled state, and the object state of OIM account is set to 'Disabled' by means of task return code mapping.
    If it exists, it is 'linked' to OIM account.
    The problem is if the existing account is enabled, I have to change the OIM account state to 'Enabled' either.
    To implement this (thanks, Kevin Pinski https://forums.oracle.com/thread/2564011 )) I've created an additional task 'Switch Enable' which is triggered by a special task return code. This task always succeeds, and its only side effect is switching the object status to 'Enabled'.
    By I've getting the 'Duplicate schedule item for a task that does not allow multiples' exception constantly:
    This is the stack trace:
    Thor.API.Exceptions.tcAPIException: Duplicate schedule item for a task that does not allow multiples.\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2925)\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2666)\
      at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)\
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)\
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)\
      at java.lang.reflect.Method.invoke(Method.java:601)\
      at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)\
      ...skipped
      at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)\
      ... skipped
    What did I wrong?
    Regards,
    Vladimir

    Hi Vladimir,
    Please select 'Allow Multiple Instance' checkbox for the process task.
    Thanks,
    Pallavi

Maybe you are looking for