Error - Post an Entry Document

Hello,
I have a problem concerning the posting of an entry document (categorie: Proc. with int/ext no.range). I put the quantity and the plant for my waste when I created my entry document. After saving it, I try to post it but I have the following error: EHS_W107 - Processing is not possible.
I checked the different reason but my status is WACR/RCVD, I don't have any deletion flag, there is no follow-on document existing, ...
Does anyone have an idea concerning this issue ?
Thanks&Regards

Problem solveed !
It was just a misunderstanding of the standard procedure ...

Similar Messages

Error posting Service Entry Sheet

Hi,
While posting the second SES by saving the final release approval, error message "M7022 - Ordered quantity exceeded by 1AU: Plant KKPD" appears. The release order is with "GR based IV" and the SES value is till within the limits.
Can someone help me out.
Thanks in advance.
Sheeja.

Hi ,
Pl check the number of SES you have made against the PO . You can check the same in PO history tab . May possible the number no SES qty is exceeding with PO qty . PL note that system also takes into consideration of non released SES also . So you need to reverse the unpaid SES .
Thanks
Dipak

Error while Posting Physical Inv Document

Dear All,
While posting physical Inventory Document contains only 776 items only
i got this error
Maximum number of items in FI reached
Message no. F5727
Regards,
Pardeep Malik

What did you do with the PID? did you modify to allow more than 333 items ?
as each item in a PID can create 3 entries in FI, the PID is limited to 333 items, because FI document can only take 999 items

Cost Center Error Message in Posting a Billing Document to Accounting

Hi Experts,
I am in process of testing my form enhancement for Billing Documents especially Debit Note and Credit Notes. However, when I post my Billing Documents in VF02, this status message appears:
"Field Cost Ctr is a required field for G/L account 2100 855020".
Now I already checked the configuration in FS00, VKOA and we want the cost center field filled-up in the process but automatically. Do I missed some of my configuration to maintain also the Cost Center? What transaction code should I check and maintain the Cost Center for this scenario.
Thanks a lot for your answers.

Here is the Entire Error Message:
Field Cost Ctr is a required field for G/L account 2100 855020
Message no. F5808
Diagnosis
The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "855020" in company code "2100" linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Error while Split Entry Posting in T Code u0096 FBCJ u0096 Cash Journal

Hi,
When we are using Split Entry option in this Transaction FBCJ for posting Cash Expenses, we are getting error message Field Bus. Area is a required field for G/L Account of relevant Cash Account, i.e. we can generate the entry and save but we cannot post the document into FI. (We use this option when one document / cash transaction consits more than one Expense Account and we need to post into single document).
Note :- This error is appearing inspite of cost object ( cost center / business area is entered in expenses GL line item ).
I have prepared the complete cycle of the issue but cannot attach the same here.
Need your help .
With Best Regards
Pravin ( [email protected] )

Hi,
Business area put it optional entry, if u want business area enret other wise leave it,
now u will try it will work
if it's useful assigne points
Regards
gvr

Error in Posting the Entry, Parked through F-02

In our company we are using dual concept of Parking and Posting.
When We are parking a document in F-02 and Posting it through FBV0 (OR) FV60 error message coming.
I tried in F-43 also
We are trying to park and post for a Vendor to Vendor Transfer. We have used the P.Keys 25 and 38 for this.
ERROR MESSAGE IS : FIELD BSEG-SKFBT does not exist in the screen SAPMF05A0302
But if directly post the same transaction (i.e. without parking) posting is happening. No error message.
I cannot able to understand this. I referred the same to some of my friends in other companies. But they are saying that - in their systems they can able to park and post the entries.
Can any body help me in the matter. I will be grateful to them.
Thanks in Advance
Regards

Yes It is possible. After entering all the line items you need to select the Document - Park. With this It can be parked.
To post the same you have to use FBV0. There you can select the document and post.
In my case system allowed direct postings in F-02. It is also allowing when I am parking the same line items. But when I want to post it through FBV0 it is throughing an error. This is because the mismatch of Filed Status Group of Vendor Recon Account and the Posting Keys(i.e. 27 & 38). I made them correct and now I can able to solve the problem.
Hope I clarified your doubt. If not please revert back.

Error during entry document processing - wae02 - EHS

Dear All,
In WAE02, i am getting the below error
"Error during entry document processing - wae02 - EHS"
But, when i click on "extras - messages", its empty.
Added, i have assigned "Partner assignement", posting is over, Accout assignment is complete.
Still the warning message comes and PO is not getting created.
Please answer this high priority issue and do the needful.
Regards
Hari Prasath

Hello Hari
Seems issue is with BAPI in Purchase order process
Check the OSS Note :1111389
Balajee

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error 'Specify account number' while posting a parked document through FBV0

Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,

BAPI_GOODSMVT_CREATE - Error while posting a Material Document

Hi Experts,
We are trying to do the material document posting using the transaction "MB1C" manually in SAP. The movement type which we are using for the same is "261". While doing this is, it is asking for a work order number and the Recipient number. We gave the Recipient Number as "123". Material document is created successfully.
Again using the same transaction "MB1C" , we are trying to do the reversal of the material document which we posted previously against another work order number for the same material and the serial number if the material is serialised and as well as for the non serialised material.
Both this case, in SAP the material document is created succesfully. This is done manually in SAP.
When we are trying to create the material document using the BAPI 'BAPI_GOODSMVT_CREATE', for the above scenario, posting the material document '261' movement type for one work order and the reversal for another work order '262' movement type for the same material (whether it is a serialised or non serialised) we are getting the eror as "RE Qty. transferred exceeded 1 PC: 50,003,695 C001 USED 1200".
We are passing the following at the item level. MATERIAL Number, Plant, STGE_LOC, ENTRY_QNT, MOVE_TYPE, BATCH, ORDERID, RESERV_NO, RES_ITEM, ACTIVITY, XSTOB for reversal.
We are passing the GM_CODE as '05'.
Please let us know what needs to be changed inorder to create the material document properly without getting errors.
Thanks in Advance,
Mohan.

Hi,
We fixed this issue by removing the reservation number of the material when we are trying to post the material document with the movement type "262".
The reason for removing the reservation number for the movement type "262"
The reservation number is getting created against a work order when we trying to create the work order in IW32. This reservation number is used for validating the stock while we are trying to consume and doing the reversal.
SAP is allowing us to reverse the consumed quantities only based on the reservartion number and hence we got this error.
To fix this error, if we are trying to reverse a particular material against a different work order for which it has been consumed previiously, remove the reservation number and item number and try posting the material document.
Hope this solution will solve your issue:)
Thanks and Regards,
Mohan.

Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

Dear All,
We need a suggestion/solution for the following problem :-
Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
Account Assignment Category was P-Project
The WBS element was entered as the Accounts Assigment Category was P.
The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
1. Through T-code ZML81N the end user is able to create and save the SES.
2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
We have already escalated it to SAP.
Thanks in advance
Anil Shanbhag

Hi,
Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with Program RM07CUFA
Regards,
Biju

Error F5 702 while trying to post a parked document in MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help?
Regards,
Anitha

Hello Raju,
Its a invoice which the user posts via a MIRO.
I can do it with a FM also, U r right.
There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there has been any exchange rate problems etc...
Thanks,
Anitha

Posting A Park document of year 2005 in 2007( Error message no. FP 041)

Hi All
I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
I am getting the following error.
Changing of document number or fiscal year not possible here
Message no. FP 041
Please let me know whether i can post a parked document of 2005 in 2007.
or any way to rectify the same.
regards
Ramesh

How can we change a parked document's fiscal year?
I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
When I use FBV2 to change header information, it shown up an error message:
Changing of document number or fiscal year not possible here
Message no. FP041.
How can I do now?
Thanks.

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error - Post an Entry Document

Similar Messages

Maybe you are looking for