Error, posting the message

Why do I always get: 'Error, posting the message. Please make sure all required fields are entered' when I had not been given the option in the first place.
You can tell I am finding this interface frustrating. Why is Apple using software that they cannot (or will not) fix and which consistently performs worse than many other services?
Its one good point (for me) is the spelling check.
Xserve Other OS

It looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.

Similar Messages

Error "Post the HUs for goods receipt so that they can be transfer "

Hi Gurus,
I am facing a problem while doing PGR the inbound delivery,
I am moving stock from one SLOC (AY02- HU Managed) to Another SLOC
(AA99-
Non HU). Inbound delivery is created .
I did automatic packing and packed the HU generated and saved the
inbound delivery. While doing PGR I am getting error "Post the HUs for
goods receipt so that they can be transfer posted Message no.
HUFUNCTIONS254". Kindly Assist
Steps for Reconstruction
1) MB1B post with 311 movement type.
2) delivery gets created.
3) pack the HU's automatically and HU's were generated, save the inbound.
4) Do PGR .
Regards
Gopi

Hello,
There is a "concept problem". You are not doing a reception, you are posting an issue. After running MB1B system should create an Outbound delivery.
In a HU-managed storage location you should use existing HU in order to pack the delivery. Instead of generate new HUs in the OD, try to pack existing ones.
Regards

In AOL email, checking individual messages in the regular system results in this error message: There was an error loading the message. Please try again later.

In accessing AOL email through the full version, I can navigate within my account (old mail, new mail, spam, etc.) fine, but when I try to open an individual email, I get this error message: "There was an error loading the message. Please try again later."
This is identical to a problem someone else was describing in another thread....unfortunately, nothing you suggested to him seemed to be working. I WAS tricked into opening a file attached to an email immediately before this started, so I think its a virus or something. ANYWAY....I AM able to open the messages when I use AOL's basic version. Initially, the problem seemed only to be in Firefox, but I've tried with Internet Explorer now also, and its the same thing, and the basic version is accessible while the full version is still blocked.
On both browsers, following the error message, I can't even click on the individual messages to TRY to open a different one, and there are some not-quite-right boxes and x's and things that appear on the screen that don't belong.
PLEASE tell me you can't make this go away....I've already tried uninstalling and reinstalling Firefox....that didn't work. I've also fun McAffee, and that didn't change anything.

You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Error posting the file

Since upgrading to 10.10.1 (14B25) on my iMac a couple of days ago I get the following error when I try to insert an image in an email -
Error posting the file to https://thegallerykinsale.com/ckfinder/core/connector/php/connector.php?command= QuickUpload&type=Images&CKEditor=editor1&CKEditorFuncNum=2&langCode=en
This does not happen on my Macbook pro which has OS X 10.10 installed and thing work fine on my iPad, so I suspect this is to do with the upgrade.
Any help much appreciated.
Regards, Kenneth.

Since upgrading to 10.10.1 (14B25) on my iMac a couple of days ago I get the following error when I try to insert an image in an email -
Error posting the file to https://thegallerykinsale.com/ckfinder/core/connector/php/connector.php?command= QuickUpload&type=Images&CKEditor=editor1&CKEditorFuncNum=2&langCode=en
This does not happen on my Macbook pro which has OS X 10.10 installed and thing work fine on my iPad, so I suspect this is to do with the upgrade.
Any help much appreciated.
Regards, Kenneth.

Error Transmitting the message to endpoint -Received HTTP response code 401

Hello Experts,
I am having a SOAP to Proxy scenario. We are using HTTPS without client Authentication.
Everything is running fine and well set on DEV system. After transporting to Test system, i am getting error as :
Error Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
I get HTTP 200 Ok response in my soap client but the message is not reaching to Integration Engine. It is failing with above error. On CC monitoring for SOAP adapter it shows call completed successfully. But when I use the mesage ID from CC monitoring in Message monitoring i get the error as shown above in Audit log.
I have checked for Roles attached to my user on DEV and Test systems , I have same roles on both systems.
Any inputs to solve this problem will be very helpful to me. Let me know which service users i need to check for this issue?
Thanks in Advance,
XI Queries.

Hi Pinang,
Thanks for input.
1) Check Role -SAP_XI_APPL_SERV_USER is there in XIAPPLUSER or not.
->Done. Its Ok.
2) check tyour port entry is like J2EE port 5<System no> or not.
->Done. Its Ok.
3) If the error in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
->This note refers in case it happens with high load. I am just sending a small request and no one else is using / testing this interface. So no high load.
4) Check password for user XIISUSER
-> Basis team said they checked for all Xi users and they are not locked.
5) Check password for user XIAFUSER
-> Basis team said they checked for all Xi users and they are not locked.
Any other hints will be helpful.
Kind Regards,
Xi Queries.

Troubleshoot-Adapter engine:Error Setting the message status to DLNG failed

Dear Experts,
We use SAP RFC- PI-JDBC(MSSQL). here the Data(message) successfully transfered to mssql table but the status is been set to DLNG failed, And it finally shown as SYSTEM ERROR.
QoS required: ExactlyOnce , here The Message has got inserted in that particular table and in PI adapter the status turned to DLNG faild and the service again tries to send the same message which is not possible becoz the data is set for primary value.
2010-09-15 09:59:48 Success Message successfully received by messaging system. Profile: XI URL: http://XXXXX:50000/MessagingSystem/receive/AFW/XI Credential (User): YYYY
2010-09-15 09:59:48 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-09-15 09:59:48 Success Message successfully put into the queue.
2010-09-15 09:59:48 Success The message was successfully retrieved from the receive queue.
2010-09-15 09:59:48 Error Setting the message status to TBDL failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 09:59:48 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 09:59:48 Success MP: Entering module processor
2010-09-15 09:59:48 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 09:59:48 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 09:59:48 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 09:59:49 Success Database request processed successfully
2010-09-15 09:59:49 Success MP: Leaving module processor
2010-09-15 09:59:49 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-09-15 09:59:49 Error Setting the message status to DLNG failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: Error updating status..
2010-09-15 10:37:01 Success The message was successfully retrieved from the receive queue.
2010-09-15 10:37:01 Success The message status set to DLNG.
2010-09-15 10:37:01 Success Delivering to channel: CCR_JDBC_ZZZZZ
2010-09-15 10:37:01 Success MP: Entering module processor
2010-09-15 10:37:01 Success MP: Processing local module localejbs/CallSapAdapter
2010-09-15 10:37:01 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-09-15 10:37:01 Success JDBC adapter receiver channel CCR_JDBC_ZZZZZ : processing started; party , service BS_BCP_IMPLOG_ZZZZZ
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
Thanks in advance for your valuable answer.

Hi Vinaygam,
2010-09-15 10:37:01 Error Unable to execute statement for table or stored procedure. 'imp_log' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
2010-09-15 10:37:01 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'imp_log' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Violation of PRIMARY KEY constraint 'PK_XXX_log'. Cannot insert duplicate key in object 'dbo.XXX_log'.
See above error, It cannot the Duplicate Key in your log table. Duplicate means repeated as a same data.So kindly check once your data.
IF,I assume your scenario is Synchronous, If you are using any sender JDBC adapter just check with your Quality of Service and set it to "Exactly once".
so kindly do it.
Thank you,
Sateesh
Edited by: sateesh kumar .N on Sep 17, 2010 8:17 AM

RNIF adapter error - Transmitting the message to endpoint failed

Hi
I have developed one interface SAPR/3 - PI - RNIF (Vendor system). the communication happens from PI to Vendor via HTTPS protocol, the SSL certificates has been installed on PI J2EE engine, and configured in RNIF receiver communication channel.
But when i perofrm end-end test and tryting to send messages from PI to Vendor system getting below error.
"Transmitting the message to endpoint https://**.*.*.:***/SeeburgerDT/HTTPController?HTTPInterface=rosettanet using connection RNIFAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: Connect timed out."
The URL "https://**.*.*.:***/SeeburgerDT/HTTPController?HTTPInterface=rosettanet" provided by Vendor team. i have checkd with the Vendor team and they said the URL works fine from their side and able to receive XML messages from our PI server (we are working on PI7.1.).
Pls suggest why im getting Transmission error in PI RNIF adapter log.
Is it the problem with SSL certificates installed on PI or URL used in RNIF communication channel ?
Please help how to resolve this issue.. i would appreciate your help.
Regards,
Rajesh

Hi,
we are getting same message.
"Transmitting the message to endpoint https://**.*.*.:**/*********************** using connection RNIFAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: Connect timed out."
SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"
[Thr 1085831488] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL
[Thr 1085831488] SecudeSSL_SessionStart: SSL_accept() failed --
[Thr 1085831488] secude_error 536875074 (0x20001042) = "received a fatal SSLv3 bad certificate alert message from the peer"
[Thr 1085831488] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 1085831488] WARNING in ssl3_read_bytes: (536875074/0x20001042) received a fatal SSLv3 bad certificate alert message from the pe
[Thr 1085831488] << -
End of Secude-SSL Errorstack -
[Thr 1085831488] SSL NI-sock: local=10.1.1.11:51101 peer=210.71.237.26:41004
[Thr 1085831488] <<- ERROR: SapSSLSessionStart(sssl_hdl=102b270)==SSSLERR_SSL_ACCEPT
[Thr 1085831488] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn_mt. 1676]
[Thr 1088473408] Thu Oct 15 07:31:46 2009
[Thr 1088473408] SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"
[Thr 1088473408] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL
[Thr 1088473408] SecudeSSL_SessionStart: SSL_accept() failed --
[Thr 1088473408] secude_error 536875074 (0x20001042) = "received a fatal SSLv3 bad certificate alert message from the peer"
[Thr 1088473408] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 1088473408] WARNING in ssl3_read_bytes: (536875074/0x20001042) received a fatal SSLv3 bad certificate alert message from the pe
[Thr 1088473408] << -
End o
Could you please let us know how did you resolve the issue?
Thanks inadvance
Regards
Lshriva

I have had audition for 2 years. Today it crashed. It gave a configuration error: 16 The message said to uninstall and reinstall. I did. Still the same error. Then I searched forum and checked the two folder permissions. They were correct. So what

I have had audition for 2 years. Today it crashed. It gave a configuration error: 16 The message said to uninstall and reinstall. I did. Still the same error. Then I searched forum and checked the two folder permissions. They were correct. So what do I do???????

Hi Charles,
Please refer the following helps article on the problem.
https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Hope this helps.
Regards,
Sumit Singh

403 Error Transmitting the message to endpoint for XML file to XML file

Friends,
This is my 4th day learning XI and getting below issue.
I'm trying to follow the steps to transfer XML file to XML file scenario and when I drop the sender XML file, it seems the file has been picked-up but it does not generate the output file.
I checked in RWB for the message and found below error:
2008-01-04 13:09:48 Error Transmitting the message to endpoint http://sappc:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 403
I tried to access http://sappc:8000/sap/xi/engine?type=entry from new browser window and I get the same error "403".
I'm able to access http://sappc:8000 fine.
I would appreciate help on this.
Thanks in advance.
Hetal

Sorry! you were correct I was looking at wrong file adapter. The message is error: (It gives 401 error during XICACHE update)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

How can I fix this recurring network error in the Messages App?

I use the Messages app all the time at work to chat with co-workers about jobs, etc... We have it set up using our company accounts hosted by gmail. Since upgrading to Mountain Lion we have all experienced the following issue:
At the end of the day, or when I am away from my computer for meetings, or lunch, or whatever, I log out of my user account. A lot of the time I will log back in and the messages app will act as though it is fine, but it will not actually be connected. The program makes no attempt to let me know somthing is wrong unless I try to send a message and I am prompted with "Your message could not be sent. Your account “<my account name>” is not logged in." If I go into the "Buddies" window and change the status to "Available" nothing happens, and the account bar will have the lightning bolt symbol and say "Offline" If I click on the lightning bolt an error message pops up and says, "Messages lost connection to the Jabber account "<my account name>". A Network Error Occured."
The only way to solve the problem that I have found, has been to competely re-start the computer. I have tried disabling and re-enabling the account in preferances, but it still doesn't connect.

HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error posting new messages in Discussion Forum Portlet.

I've installed the Discussion Forum Portlet from the Integration Tools version 9.0.4.0. I'm trying to post a message but I'm getting the following error:
'Unable to perform the operation: Row was not found using request parameter: 000100000004313530350000003E000000F95C4B5E59.' I've deleted the posting and reposted but the same error keeps coming up.
Any ideas?
Thanks,
Denise

Contents of application.log:
11/26/03 9:36 AM Started
11/26/03 9:36 AM Started
11/26/03 9:36 AM forum: oracle.jsp.runtimev2.JspServlet: init
11/26/03 9:36 AM forum: 9.0.2.2 Started
11/26/03 9:36 AM forum: 9.0.2.2 Stopped
11/26/03 9:36 AM Started
11/26/03 9:40 AM Started
11/26/03 9:58 AM forum: oracle.jsp.runtimev2.JspServlet: init
11/26/03 9:58 AM forum: 9.0.2.2 Started
11/26/03 9:58 AM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
11/26/03 9:59 AM forum: ServletLogger - Logging level: 4
11/26/03 9:59 AM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
11/26/03 10:08 AM forum: [id=1069859279192ApplicationServerThread-6, instance=31122_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
11/26/03 10:08 AM forum: [id=1069859279192ApplicationServerThread-6, instance=31122_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer
11/26/03 10:08 AM forum: [instance=(null), id=(null)] WARNING: Request has exceeded its warning timeout Time[elapsed=20069ms. Warning timeout=20000ms.] Request[id=1069859279192ApplicationServerThread-6 providerId=3933761 portletId=1 portletName=DiscussionForum_Portlet portletInstance=31122_DISCUSSIONFORUM_PORTLET_3933761 user=PORTAL] Thread[ name=ApplicationServerThread-9 priority=5 alive=true interrupted=false groupName=main]
11/26/03 10:45 AM forum: [id=1069861494237ApplicationServerThread-12, instance=31124_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/8/03 4:47 PM forum: 9.0.2.2 Stopped
12/8/03 4:47 PM Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (127.0.0.1))
12/8/03 4:52 PM Started
12/9/03 1:38 PM forum: oracle.jsp.runtimev2.JspServlet: init
12/9/03 1:38 PM forum: 9.0.2.2 Started
12/9/03 1:38 PM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
12/9/03 1:38 PM forum: ServletLogger - Logging level: 4
12/9/03 1:38 PM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
12/9/03 1:38 PM forum: [id=1070995094324ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
12/9/03 1:38 PM forum: [id=1070995094324ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer
12/9/03 1:38 PM forum: [id=1070995119760ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/9/03 1:39 PM forum: [id=1070995151896ApplicationServerThread-11, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/9/03 1:39 PM forum: [id=1070995161009ApplicationServerThread-8, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] WARNING: EditInfo: OID server Port not an integer:
12/11/03 2:19 PM Started
12/12/03 3:18 PM forum: oracle.jsp.runtimev2.JspServlet: init
12/12/03 3:18 PM forum: 9.0.2.2 Started
12/12/03 3:18 PM forum: oracle.webdb.provider.v2.adapter.SOAPServlet: init
12/12/03 3:18 PM forum: ServletLogger - Logging level: 4
12/12/03 3:18 PM forum: [id=(null), instance=(null)] CONFIGURATION: Invalid or null value for property - executionWarningTimeout = null - setting to default value of 20 seconds
12/12/03 3:18 PM forum: [id=1071260317481ApplicationServerThread-9, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: Default container renderer not specified
12/12/03 3:18 PM forum: [id=1071260317481ApplicationServerThread-9, instance=31123_DISCUSSIONFORUM_PORTLET_3933761] CONFIGURATION: defaulting container renderer to DefaultContainerRenderer

PO is getting created and getting an error in the Message tab ME23N

HI everybody,
I am uploading the data and creating the PO through BAPI, and the PO is getting created. when i logged into ME23N and checking the PO it is everything fine without any error.
But when i click on the message button and checking the display PO output is giving an error message over as Incorrectly processed and when i check the processing log i am seeing the msg text as error in the address output.
and i checked the NACE transaction the output type is configured with program name, form routine name, form name and smartform name.
here in the form name and the smartform name which is present is having the different name and both are the smartforms only.
Can any one help me out in this issue how to resolve the error.
Thanks in advance

Hi,
Check the TNAPR Table by putting the Form Name / Program Name to find out the output type it is attached to.
Debug
The other method of checking is by setting up a break-point at smartform and manually entering a PO using the same upload data and try to save it. But this would not help you much. Because the root cause is the Determination of output type.
Thanks & Regards
Suresh Nair

TS4036 my ipad has locked itself up and is posting the message: iCloud Backup This iPad hasn't been backed up for 2 weeks ... I've plugged it in, should be connected to wi-fi but I can't get the message off the screen and can't do anything.

My Ipad has locked itself up and is posting the followning message: iCloud Backup This iPad has not been backed up for 2 weeks.... I've plugged it in, it should be connected to rgour home wi-fi, but I cant get the message to go away when I push OK. I cant get it to do anything. It is fully charged, but I can't even turn it off (won't let me), Just continues to post the iCloud Backup message.

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

I error had the message msvc480.dll and uninstalled all apple files, trying to reinstall and nothing happens. It says I have installed it, but nothing is on my computer.

I received the error message MSVCR80.ddl and was advised to uninstall all itunes/apple files, which I did in the strict order they said. I then tried to reinstall Itunes 11 and while it comes up to say i have installed it, nothing is on my computer? what can I do now?

See Troubleshooting issues with iTunes for Windows updates. See the further information area for tips on redownloading.
tt2

Unknown error is the message when I go to publish

getting an error message "unknown error " when I go to publish
any suggestions been through the trial of reentering and changing dotmac
address and password etc thanks [email protected]

Have you tried using Keychain Access to check out the entry for "idisk.mac.com"?

Error, posting the message

Similar Messages

Maybe you are looking for