Error~ PR G/l Account & cost center is not appearing in PO while copying

Dear All,
I am converting PR into PO, while creating PR I have assigned account assignment cat as "K"(cost center ), so i assigned Cost center and G/L account , After this I tried to convert this into PO, but in PO again it is asking for G/L account & cost center onemore time,Earlier it wasn't .
May be some where the setting got changed but I am unable to find where exactly this setting got changed.
Please anyone could help in this.
Regards,
Nagaraj S

well thats really wiered
can u do one thing in your quality system create one PO and pleas but make sure the data in the po sholud be same as that of PR but this PO will be created without the reference of PR
i want to check if system is able to find the G/L account automatically which ideally it should find
in case the g/l is not picked automatically then in that case check the valuation class in material master and the g/l which is maintained in gbb or not and make sure the g/l is a cost element
if the g/l comes automatically then check the PO document type settings in the those 2 folder at the left poriton of screen in IMG>>olme>>POdefine document type

Similar Messages

Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

Hi All,
When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset.
When I see the FI document display, the fields Cost Center and Plant are blank. Business Area and Profit Center fields are getting updated.
Can any one help me how to get this Plant and Cost Center in the posted document. Is there any OSS notes for this. I am using ECC 6.0 version.
Thanks in advance for your help.
Regards,
Rajesh

Rajesh
Aditional on me answer.
The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
Steps
Click on Simulate, than you see the posting screen:
Click on the line (pk 40)
Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
An other option is to make a substitution to get this information

Default "Recoverable Tax" account - cost center segment to specific value

Dear all,
I have tried couple of days to see how to use subledger accounting setup to default cost center of recoverable tax account (recoverable tax account - cost center segment to specific value which is based on the cost center of invoice distribution), however it is not succesful.
I think might be some of the setup is wrong, please see below my setup steps:
1) Set up Account Derivation Rules
Copy rule code AP_INVOICE_DIST to T_AP_INVOICE_DIST with adding a source ='Recoverable tax", condition = Invoice Distribution Account is not null
2) Setup Journal Lines Definition
3) Setup Accounting Accounting Definition
Please advice.

Madhu,
I did some investigation too and it looks like this is only way i can do this.
Do you think of any User Exit name, which i can use it here?
Thank you and appreciate your help.

Budgeting on account & cost center level

Hi ALL, My company is planning to implement SAP in the near future and I'm taking the SAP course now. According to what SAP instrcutor said, budgeting cannot be done on account & cost center level. In my company, our current practice is to record all budget figures under account & cost center level and for every expense (invoice or journal) input, account & cost center would be the mandatory fields so that budgeting can be monitored in such level.
Can anyone tell me how this can be handled in SAP?

HI
DONT TRUST that type of words.
i hope that your instructer is not a real time guy.
we have to do Budgeting at cost center lavel in Cash Budget management. why because that is (Cost Centyer)Orgnisational level Responsibility Area
and item level in Funds mangement.
But for every expence you want do the budget you have to implement Funds mange ment Module.
then your item level budgeting will be solved.
Thanks & Regards
Mala K Reddy. Vundela

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

PO created successfully using BAPI. But G/L, Cost Center are not displaying

Hi,
I am trying to create a purchase Order type limit order using BAPI_PO_CREATE1. PO created successfully. when I try to see the PO using ME23N transaction,in the account assignment tab G/L and cost center are blank. In my BAPI, I am populating all the values in item and account internal tables.
I am debugging all the time and not able to find why G/L and Cost center are not poplulating in PO.
Pls suggest me how to finish this problem.
Thankm,
Ram

Hi,
Are you passing the update flag in POACCOUNTX table?
regards,
Ankur Parab

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

Costs in Cost Center are not zero after Revaluation at Actual Prices

I executed:
1. KSS2 - Splitting (I use a Cost Center ABC and all Cost Elements in the configuration)
2. KSII - Price Calculation
3. CON2 - Collective Processing
4. I see the report KSB1 of the Cost Center ABC, but Costs are not zero after revaluation. For example
Cost Element 61:                        $   1000
Cost Element 62:                        $   2000
Activity Allocation 98:               $ -2800
Revaluation at actual price 98: $ -100
TOTAL:                                      $ 100
Total must be $ 0.00
We work with thousands of product orders in a month. Is it possible that the problem was for rounding?
Thanks in advance for your help.
José Luis

Hi Ajay,
I checked OKEQ configuration, it's equal that you mentioned.
I have seen that Revaluation registers are using other Exchange Rate. In OB08 Exchange Rate P is 2.80 ( 1 USD --> 2.80 PEN)
How ever those revaluation registers are using ERate of 2.14 (1 USD --> 2.14 PEN)
Why revaluation registers use other Exchange Rate? Is this the problem that Cost Center is not zero?
Thanks in advance for your help.
José Luis

Cost Center does not match with the profit center

Hi Gurus,
Can you resolve my issue?
"Cost center does not match the respective profit center of the sales document for freight revenue - Doc Type: RV ( Billing Doc Transfer) Normal Document"
I request you to all, kindly solve my issue.
Thanks with Regards,
Bala

It appears that you have assigned a cost center to freight cost element and the profit center assigned to the cost center is different from the one derived by the document. As result this message.
Check the derivation rule for profit center
Regards
Rakesh Pawaskar

Profit center is not appearing in FBL5N t code

Hi Friends,
My business(ECC 6) is posting customer JV in f-02 .he is givivng profit center and costcenter while posting document . After that run FBL5N t code in that list for particular coustomer code profit center is not appearing ....
why it is not appeering in fbl5n.
thanks

Jagadeesh,
You cannot view profit centre in FBL5N for normal open items, as you cannot assign profit centre to a Customer line item i.e. with posting key 01 customer debit.
How ever you are saying that you can view for some special GL transactions. If you can see profit Centre for both the line items you can view in report.
I hope you can assign profit centre to customer line item while posting document.
OB41 - Change field status for posting key 01.
In general you will not assign profit centre to Customer line item. Profit Centre will be assigned to your revenue account.
How ever you can assign profit Centre to customer line items through BAPIs.
Regards,
Praisty

Profit Center is not appearing in MIRO

Hi,
I have raised purchase order for asset. While doing MIRO with reference to purchase order profit center is not appearing. I check MIGO document profit center is appearing in MIGO document.
I have maintained profit center in Material Master.
OKB9 setting is required for ASSET??????
Please help
Regards
Amit

Hi
We are using ECC 6 with document splitting. I have check field status for GL . Profit center is already optional field
Regards
Amit Hingne

Cost Element column not appearing in IW31/ IW32 transaction

Hi,
In transaction IW32, in Operations Tab --> click on External Button (below shown on IW32 screen).
Now under External, click on Services tab (1st option), here Cost Estimate column not appearing.
We tried to add through configuration option on this window. (there shows table setting --> click on administrator, now you can see Edit system settings, here Cost Element - ESLL-KSTAR shown with TICK on Invisible checkbox).
How can i Untick that. I tried but after activate, it again appears.
Plz guide..

Hi,
Where a cost element exists on the operation External TAB, input of the same data on the service line is not allowed. In that case the system decides that this data field should not be available on the service lines. Where the is no cost element on operation then entry is allowed on service line.
This program logic is overwriting the field configuration on the table setting for service entry grid. This is why the invisable flag cannot be changed.
-Paul

HT204074 I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help

If you want to add it then you need to do one of the 3 things mentioned on that page e.g. use iTunes Match on your iPad, use automatic downloads on it, or redownload one of your past purchases. I think that the 'manage devices' section will only show when you have one or more devices/computers associated to your account, if you don't have any associated then it won't appear.

Error~ PR G/l Account & cost center is not appearing in PO while copying

Similar Messages

Maybe you are looking for