Error premiere cs4

Not Found The procedure entry point ??1NewHandlerInitializer ErrorManager @ config @dvacore@@ QAE @ XZ
in the dynamic link library dvacore.dll
error
Startup.dll LoadLibraryEx failed with error 127: Could not find the specified process

Uninstall and then reinstall Premiere.
-Jeff

Similar Messages

Media Encoder error about activation when exporting in activated version of Premiere CS4

I get the following error when I try to export media in Premiere CS4 (Note: I have a legal and activated copy of CS4 Master Collection). In Premiere, it appears to go through (the loading progress bar fills and then disappears) but when I check the folder, it's empty. And then I notice that there's another icon in my taskbar and oh hey, it says "AMT Subsystem Error: Thank you for using Adobe Media Encoder CS5. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder."
I'm using Windows 7 x64 (8gb of RAM). I tried installing the patch as suggested in this thread: http://forums.adobe.com/thread/719451 but it only claimed to not have the corresponding program installed. I tried checking to see if there were any updates - there weren't.
A quick check on my computer reveals that both Media Encoder CS4 and CS5 are installed. I looked to see if there was a way to uninstall the CS5 version but didn't see it. The only way I think I could have gotten it was though some sort of Adobe update.
Any ideas of how to fix this?

Hi: I have the same problem, but it happened very suddenly and after very specific updates. I successfully encoded a file using the CS6 encoder. Then, I allowed updates to Adobe Media Player and Adobe Air. I tried to encode with CS6 again and it had stopped working - all in the space of 5 minutes. A reboot did not help. I also have CS4 and CS 5.5 installed and have had all along (which means that you can have them and use the CS6 encoder). Since I can no longer use the CS6 encoder, but am able to launch an older one, I am using that for the moment. I hope that this reply will be of some help in finding a solution.

Premiere CS4 Media Encoder AVIs and Encore Encoding Errors

For some reason, I'm having trouble creating DVD's in Encore from AVI's exported from Premiere CS4. When encoding starts, Encore immediately pops up with an "encoding error". I now, all of a sudden get this identical error on two of our systems.
Most of the time Encore works if I export an "MP2" file from the Premiere CS4 timeline.
Any of you guys having trouble with Encore CS4? To me it has been a lot more buggy and unreliable than any previous version. The program also seems sluggish on our Q6600 4gGB RAM computers! Kind of like the program is straining just to open its windows.
Another thing that is annoying. Earlier in the day, I exported a Flash Web video for a client's review. A few hours later I had to make a 1 hour and 46 minute DVD with chapters for a client that had to be Fed Ex'd overnight. It took forever to complete and I soon realized that Encore defaulted back to the last export...FLASH! cr@p. I would prefer that the program defaulted to standard DVD creation. After all it is Encore DVD.

I'm having major problems with Media Encoder CS4.
When I try to create an AVI file (for example) from a section of my Premiere Pro CS4 timeline, the encoder opens, takes forever to load the project, and then, after I hit start queue button, it again takes forever to load the project in the small window at the bottom of the display.
Finally the "waiting" message in the queue list turns to an orange exclamation mark with the message that encoder "could not read from the source. PLease check if it has been moved or deleted." Which of course it has not been. THis happens even if I preview the section in advance in Premiere. material.
If at any point I hit the settings button it simply reloads the project

Instalation error in premiere cs4

Hello, I had adobe premiere cs3 since à long time, and this week, I upgrade my pc to windows 7. I installed cs3 it with sucess. After, I saw that premiere CS4 was better for 7, so I download the trial. But, when I install it, I had an error message that said that he can't install all the component, so he can't install adobe premiere cs4, only few program are installed, like adobe bridge cs4...
I uninstall cs3, because I tought it was the problem, but it wasn't. Aftet, I tried to reinstall premiere cs3 because cs4 won't be installed, and I had the same error with cs3!
So anyone can help me?
And sorry for my english, I'm french

I buy an internet version (for student, they send the cd by the post), so its a donwload version. When I installed it on xp, he make a folder windows.old , so I think he doesn't format the disk, but I realy don't know!
If its that the problem I will format my disk and reinstall seven when I will recieve my disk!

Premiere CS4 Trial installation error

Hello,
Whenever I try to install the Premiere CS4 trial on Vista Ultimate I get an error dialog at the Loading Setup window that says critical errors were found in setup please see the setup log file for details. Then the installer exits after hitting OK. Any ideas where this setup log resides so I can try to figure out what the problem is?
Thanks,
Andrew

O.K. I found the error log and following are some excerpts from the log that mention errors. It does not help me at all. Does anyone have any ideas what the problem is?
Thanks,
Andrew
Updating media info for: {645E316B-8123-4469-83FD-7BA0523040DB}, Effective: {645E316B-8123-4469-83FD-7BA0523040DB}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, MeInstallation result: 0
[ 10588] Wed Dec 10 13:38:53 2008 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
code {string}: 0
args {object}: [object Object]
[ 10588] Wed Dec 10 13:40:48 2008 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
ProductIcon specified for project. Using icon from C:\Users\Andrew\AppData\Local\Temp\{21EEB50A-C615-4B7B-928B-4262121A7C78}pr_app_icon.png
ProductIcon specified for project. Using icon from C:\Users\Andrew\AppData\Local\Temp\{957FF71A-BD6D-4313-9214-9CBBD718A785}pr_app_icon.png
[ 20812] Wed Dec 10 13:38:57 2008 FATAL
Critical errors were found in setup
TypeError:'undefined' is null or not an object
Please see the Setup log file for details.
[ 20812] Wed Dec 10 13:40:48 2008 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

Premiere cs4 error [../../Src/rederFrameRequest.cpp-414]

Ciao qualcuno mi può spiegare perchè premiere cs4 mi fa questo errore?
Io provo ad aprire un progetto della cs3 con la cs4 e poi, dopo che me l'ha apero, me compare questo errore.
Grazie
Damiano

Sorry for my Italian. Today i re-opened a Cs4 project. It occurred this problem.
[../../Src/rederFrameRequest.cpp-414]
or
[../../Src/rederFrameRequest.cpp-422]
Most of the project was made using Cs3, but the last two modifies were made in Premiere CS4.
Does anybody know what this could mean?
thanks

Can you help me with this Premiere CS4 error? (picture included)

Hello
I have Adobe Premiere CS4 and when I recently updated to 4.2.1 many of my videos now do not have playback in the source or edit windows. Some are black screens, and some are turquiose during playback. If I click on the edit window to select the video frame and move it within the edit window (say to the left side) it will play back with a turquoise overlay and show the video behind it enlarged. This ONLY happened when I did the update. I am running Windows 7 64bit. When it was at 4.0.0 everything ran just fine. The video I have been working on is a 1080p .MOV file. Has anyone else seen this? There is a picture of the problem below.
Thanks for any help!
James Poremba

Updates, whether with a program, or the OS from MS (or Apple), can cause all sorts of driver issues. These are most often seen with video and audio drivers. Just a simple OS hot-fix can render these obsolete instantly. Also, some recent nVidia drivers contained some "gamer-only" modules for things like 3D rendering and 3D stereovision for use with nVidia goggles. These seem to have been updated, so that these modules do not bring Adobe programs to their knees.
A couple of XP-Pro hot-fixes messed up my nVidia Quadro in PS. A simple driver update fixed those. I had gone more than 6 mos. with not one problem, and then installed the hot-fixes and BOOM!
Good luck,
Hunt

Clip notes with reader 9 and premiere cs4

After upgrading reader to version 9 clip notes no longer works from Premiere CS3. It does work with premiere CS4 but a modification to reader by the reviewer is required to view the clip notes. Otherwise the video play/rewind etc buttons will be missing. This modification is detailed here www.alserver.co.uk/clipnotesreadme.pdf.
I have discovered this after many hours of trial and error and have posted the workaround here for anyone else with the same problem. Adobe support have been as much use as a chocolate tea pot! why do they ruin such great feature of premiere.
If anyone knows of a better workaround then please advise.

...real-time playback works fine in other high-load editing programs, as in the 2-series version of Avid Media Composer (which, by the way, played back just fine on my GeForce card and CPU/RAM configuration.) I wanted to go to Premiere because of my other CS programs. That said, I'd like to take a different approach other than simply throwing money and horsepower at a problem that might simply be a configuration issue.
Thanks!
Alan Staats

Why does Premiere CS4 fail to import video files from my Samsung Galaxy Note 3?

I've acquired a Samsung Galaxy Note 3. It takes supherb HD video 1920x1080. But when I attempt to import the clips in Premiere CS4, I get the unsupported file error message. Am I missing a format spec in my project setup menu list? Or do I have to convert the files before importing and with what?

Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Find file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Premiere CS4 is only encoding half of the audio

Ok, I'm basically stuck here.
I export my sequence from Premiere CS4 to Media Encoder and the final encoded video has audio for the first half but then abruptly cuts out and there's only silence after that.
The audio works and sounds fine in the Premiere project. It is mainly audio that was recorded with the video clips but there are also some unlinked music tracks as well. The video clips are a mix of .WMV, .MOV, and .AVI and the audio music clips are .WAVs. I'm currently working on a PC.
I tried re-encoding, restarting the computer and then re-encoding, and nesting the sequence within a new sequence and then re-encoding. The problem still persists though.
This problem is especially confusing because this is the third and final video to be exported from the project and the first two videos exported and encoded perfectly fine without any audio problems. The first two videos also contained a similar mix of video and audio formats.
So, I'm really confused and frustrated with this issue. Has anyone else experienced this problem? Were you able to fix it? Any ideas, solutions, or suggestions are greatly appreciated!
-Ben

Thanks for the message Hunt.
When I said that the audio cuts out at different times I was referring to exporting the same sequence with no editing. So, when the exact same sequence is exported multiple times the audio will cut out at different points for each exported video. This makes it really hard to pinpoint a specific clip.
Thanks for the ideas about where to look for the problem. I didn't really keyframe the audio at all but there were keyframes on some of the video clips. I was working with Effects a lot but mainly just for video color correction and transitions. I agree about there being a lot of nooks and crannies and it's pretty unfortunate that it has come to checking into all of those.
I agree that AME shouldn't be causing this problem out of "sheer meaness" but I am rather inclined to start referring to AME as the "Adobe Meaness Encoder", ha ha!
FIXED!! Ok, so I figured out a work around which is a little shoddy but seems to do the trick.
-Based on mickkeav's suggestion I updated AME with the 4.0.2 update. I don't know if this solved anything or not because I didn't do an export immediately after updating.
-I exported out the entire sound track from my final sequence as a .WAV and then replaced the original, problematic audio with that new .WAV file. This seemed to solve the problem because the sound now works fine and doesn't cut out at all. The audio still sounds as good as it did originally too.
An earlier, similar solution was to use Quicktime Pro to remove the existing, errored sound track from the video and then add the new and complete .WAV file but this increased the video's file size by 100 mb whereas encoding with the new .WAV track in AME did not increase the video file size at all.
Thanks for the help and hopefully nobody else runs into this problem!
-Ben

Premiere CS4 I Can't Import .MXF files but Adobe assures me i can?????

Hi I have Adobe Premiere CS4 and I am trying to import some videos to it and they are in .MXF format. Premiere issues me "codec missing or unavailable" and I don't want to download some sort of converter. Isn't Premiere supposed to support .MXF files?????????

Not sure about CS4, I started with CS6. And hope I'm not being preachy here, but an awful lot of troubles over MXF files have the same root problems. Even some very experienced editors have had issues with this. The vast majority of the times this error comes up people have not imported as PrPro needs it ... MXF files are a form of AVCHD ... the camera makes separate (and oft fairly short) sections of video file and matching audio files, stored on the cam in separate folders, with a database to tell any further software use which pieces are part of the same "full-length" clip, and that data is stored in a different folder-tree from the other files. If you don't properly import the whole folder tree, PrPro says ... no go.
So ... when uploading onto the computer, or moving the files around to various drives, you ALWAYS need to take the entire folder-tree from the camera and move it intact. Some other softwares manage to sort out MXF/AVCHD files while the top level folder didn't get copied, PrPro probably will choke. Next, you need to navigate to the files in the Media Browser and then select and "Import" those files, then work them from the Project panel.
Oh ... and often times if these are on external drives, PrPro can be picky about seeing/working with them.
Neil

Where to find Premiere CS4 Crash log?

Hi,
I've been running Premiere CS4 on Windows XP x64 for the past several months without any problems. A couple of days ago, I suddenly started getting a crash window whenever I would start up Premiere (during the splash screen loading). I accidentally clicked on the "do not display again" option in the window, so the window has since disappeared and no longer shows up.
I have tried uninstalling CS4 completely, and reinstalling the entire suite, but I still have the same problem. Furthermore, the crash report screen still doesn't display anymore.
I am starting to get quite frustrated at this point. I am not sure where to look for a crash log and/or how to figure out / pinpoint what might be causing the error.
I am running XP x64 SP2 with all the latest patches enabled.
Other CS4 apps (ie: photoshop, encore, etc), work fine.
Can anyone help point me in the right direction? I've tried searching the web to see if there is a way to reenable this crash report window and/or to find any pertinent log files, but can't seem to find anything.
I've already read through http://kb2.adobe.com/cps/405/kb405950.html and tried out most of the suggestions to no avail.
Any help and/or suggestions would be greatly appreciated. I have wasted hours trying to figure this out on my own but am just spinning my wheels at this point.
Thanks!
Eric

That is the reason we advise never installing codec packs, since it is often utter h*ll to get rid of them again, leaving the only option for the non-expert registry wizards to reinstall OS & programs. Usually a faster and better way to repair things. I don't think it is fair to blame that on Adobe, especially since you aggravated things by using an unsupported OS to start with.
Fair enough, however, everything I have read about XP64 and CS4 is that it isn't officially supported, however, should work fine. And true to form, it does/did work fine. Until I messed things up.
I guess it is the lack of debugging tools and the length of time that it takes to install/uninstall CS4 that is making this process so utterly painful. If there would be better tools and/or documentation for fixing a hole that you have dug yourself into, it would make things so much better.
I love Adobe products, but they have a history of poking around in obscure places in the OS that is intentionally undocumented, for example activation information, serial information, etc. They have only recently (in the last couple of years) started providing tools (ie: CS4clean script) to help clean up faulty/defective installs. However, even those don't seem to work perfectly. I already uninstalled CS4 and ran the clean script. Yet after reinstalling, my crash window no longer gets displayed in my original profile. Which indicates to me that there are still some setting lurking around somewhere in the system that Adobe hasn't documented.
Now I completely understand Adobe's need to do this in order to protect its IP and software and business model. Where they fall short, however, is providing tools to help the user determine what is wrong, faulty, defective in their system in order to be able to successfully (re)install the application.
My case is a prime example. If there was a way to enable a "safe mode" of sorts, or a logger that indicates exactly which files were being loaded/accessed, it would go a long way to help determine what gremlin is still lurking in the PC. Without such tools, it becomes incredibly arduous guessing constantly. Add to the fact that every "guess" that includes and installation takes 1-2 hours to complete, and the frustration levels start to increase.
That being said, I have yet-again just launched the uninstallation of CS4. Will run the clean script again afterwards, reboot, and reinstall and keep my fingers crossed.
Thanks,
Eric

Encoding failed: unknown error in CS4 Windows 7

I'm getting the following error near the end of an Adobe Premiere CS4 sequence that I'm trying to encode:
- Source File: X:\scripts\rubyconf2009\premiere\19-nov-2009-14-10-east-meets-west-yuki-sonoda.prproj
- Output File: X:\scripts\rubyconf2009\premiere\19-nov-2009-14-10-east-meets-west-yuki-sonoda-large.mp4
- Preset Used: Custom
- Video: NTSC, 1280x720, 29.97 [fps], Progressive
- Audio: AAC, 64 [kbps], 48 kHz, Mono
- Bitrate: VBR, 1 Pass, Target 0,50, Max 1,00 [Mbps]
- Encoding Time: 01:03:33
25.01.2010 13:45:17 : Encoding Failed
Error compiling movie.
Unknown error.
I'm really not sure what the problem is. Everything seems fine in all my other movies but something in this one (and one other one) seem to be causing these failures. Any advice you could give would be really appreciated.

What are the source files in this (and the other offending) Project? Do they match those Sequence/Project Presets?
Does the Audio in these source files differ in any way?
What is different about this/these Project(s), from the others?
Often, Encoding will fail because of gaps in the Video. However, the error message is usually "Failure to Return Frame."
Good luck,
Hunt

DVD vob to Premiere CS4 via Media Encoder

I'm a nube going through the pain of figuring out how to use vob DVD files in Premiere CS4. I've done my research and the problem has many solutions, most which are way more pain than I want.
In another thread a user said that Adobe Media Encoder works well to convert vob files to Premiere friendly files. If so, what output format should be used? I don't see a DV AVI-2 option in ME that many threads say is the best.
Thanks

Thanks Jim. I renamed the vob to mpg, then used the NTSC DV preset under the Microsoft AVI Format, and all good except the audio was stripped out. Also, when I try in import the avi to Premiere I get an error message "File video dimensions (width/heigth) too large) even though both the project and avi are both sized 720x480. Sigh.
I'll keep trying.

Premiere CS4 export Mpeg2 setting

i use Premiere CS4 and i am a leisure user.
1. when i export mpeg2, the video is 800m file sze
    if i export to DVD, the files (video + audio) are 240m
   as i know DVD is mpeg2, what's wrong with the setting on huge file size difference?
   i need a small size mpeg2 file.
2. can i edit vob directly? it is very time-consuming to convert vob to avi and then edit.
3. when i used premiere pro before, it has function to export DVD directly at premiere.
    but now CS4 need to revert to Encore. Any fast track?
4. i alway have corrupted cache when importing avi files. i need to remove cache and import again until it is ok
   any way i can do it better or less error.
5. any fast method to simply cut the movie, not do any change of resolution, codec....
Thanks a lot in advance. i have lots of question.
Tony

Unfortunately, you've posted to the Premiere, and not the Premiere Pro forum. This is for a program that predates the "Pro" designation. Maybe the MOD's will move this for you, so you'll get more traffic.
Now, let's see if I can address some of your questions:
As for the MPEG-2, it is most likely that the larger file has a much higher bit-rate. What are the settings between your Exported MPEG-2 and those in the Transcoded file? That is the common difference.
As for editing .VOB's, if they are 100% DVD-compliant (very important), then CS4.1 can Import and edit. These still have the MPEG-2 compression, but should work fine. If those .VOB's were created by Encore, then changes are almost 100% certain, that you can edit them. If not, then the odds go down, and quickly. See this ARTICLE on .VOB's.
Export to DVD directly, went away with CS3. The included Encore is much, much better, and is the way to go. There is also a forum for it.
I've never had a corrupted cache, and cannot help here.
If you have DV-AVI Type II material as source, you can edit until the cows come home, and Export to DV-AVI Type II with no noticable degredation. Other formats/COCE's not so much. Here, it just depends.
Good luck,
Hunt

Error premiere cs4

Similar Messages

Maybe you are looking for