Error : Price could not be determined

Error : For a new plant for a new material its giving error
*No Price could be determined for material/batch 20002/Plant 5001
Wht reason could be for this error. while creating an indent

The price in accounting view, it picks up the moving price automatically need not be entered as per valuation but the problem is itz not picking the price and showing value as 0.00
This is happening only for new plant. Is there any plant specific setting for material.?????
The price is being picked up for material in other plants. Itz not getting picked up only for one plant.
Any solutions plz????

Similar Messages

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error the actual price could not be determined while executing CKMLCP

    Hi!
    we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
    Our scenarios is as below:
    we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
    for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
    So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run).  is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
    regs,
    ramesh

    Hi Ramesh,
    Message CKMLLA102 is standard system behaviour when the actual
    price of an activity is zero because cost center accounting does not
    allow actual prices to be zero.
    Unfortunately the system can't distinguish an actual activity price
    of zero from a not yet calculated activity price, so for activities
    with actual price zero the message CKMLLA 102 is sent.
    Have you check the SAP note 361379?. It provides you some options to overcome
    the issue.
    Best regards,
    MLM

  • Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

    Hi Friends,
        I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
    The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
    I have noticed that 2 things .
    1.  E1ADRE1 field is NOT being sent by the ECC system .
    2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
    Has anybody faced this problem before ?
    I look forward to replies.
    Detailed error is given below.
    Regards,
    Ranjini.
    Customer could not be determined
    Message no. /SAPAPO/EDI010
    Diagnosis
    The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
    The section was not available in the processed IDoc.
    System Response
    The system cancels processing.
    Procedure
    Configure the EDI convertor in such a way that the corresponding section has a value.

    Hi Ranjini,
    Please look into the following
    1) Customer master data is fully maintained
    2) Customer number ranges are fully defined in customisation
    3) Customer address details are maintained
    4) Is there any special characters used while defining customer data or customer
    number like $, #,[ etc.,?
    5) Customer int models are active in SCM side prior to IDOC processing (including
    customer, demand, stocks etc)
    Please confirm your findings
    Regards
    R. Senthil Mareeswaran.

  • BDC Error - Codepage could not be determined

    Hello Gurus,
    We are having a problem with BDC in transaction VF01.
    The return message is FES-025 "Codepage could not be determined".
    First of all the details and what have been done so far:
    - The funcion module with BDC is called by an EDI message that is send on the creation of the SD Invoice.
    - In Online mode, no errors are raised;
    - The errors are only raised when the program runs in background - Manual processing of EDI message via T-Code WE19 (online mode) runs with no problems;
    - In DEV enviroment, everything runs smoothly (both online and background modes) and we achieve the required result;
    - In QAS enviroment, with exacly the same versions of code, the background process fails;
    - Both DEV and QAS work on the same physical machine, on different instances.
    I've searched quite a lot about this error and most results talk about the usage/call of GUI_UPLOAD or GUI_DOWNLOAD. We are NOT using this type of funcions in our code (or something that would connect to the client).
    Any ideias?
    Thanks in advance, best regards,
    João Argêncio

    Some additional informations:
    - The sistem is non-unicode;
    - The EDI message source and destination are the same machine (inter-company process);
    - The user assiciated in IDoc Config has SAP_ALL privileges;
    - Both systems are in the same release levels (ECC 5);
    - All IDoc configuration is equal in both DEV and QAS instances.
    If you need any additional information just let me know.
    Thanks oin advance, best regards,
    João Argêncio

  • Getting error "Codepage could not be determined" in background job

    <i>Hello Friends,
                  I am running a background job with a variant and the job get cancelled with the following error message.
    Codepage could not be determined
    Message no. FES025
    Please give your valuable comments.
    Thanks,
    Senthil</i>

    Hi,
      Check the oss note 765763(Setting the upload/download codepage for a SAPGUI connection) released for this purpose, as per the documentation of this note, you need to modify the standard program LSFESF03 in order to get rid of this error,
      Also check the note 882961(File download: codepage conversion error FES024)
    Hope this helps,
    Rgds,

  • PO Creation Error - "Price could not be translated to standard currency"

    Hello SRM Experts
    Using SRM 5.00 in an extended classic scenario
    I have a purchaser who every time they convert a shopping cart in the sourcing cockpit into a PO gets the above error message on the Sourcing Document Preview screen for each line item. They can ignore it and continue without any consequence to the PO and it's status.
    In comparing to other UK based purchasers their Purch Org Structure is identical with only GBP defined as the Local Currency attribute. I have ensured that all country related parameters against their profile and purchasing group points to the UK. None of the other UK purchasers have this problem.
    Hope you can help.
    Thanks
    Ian

    Hi Masa
    Thanks for your response.
    Unfortunately, this is happening for every SC they are converting into a PO. Regardless of the Vendor and it's currency.
    Regards
    Ian

  • BGD Job : Codepage could not be determined

    Hi all,
        I run a report  (YMMI0038) in background and hitting the following error :
        Codepage could not be determined  FES 025 E
        Job cancelled after system  exception ERROR_MESSAGE 00 564 A
        This has no problem when running in foreground.
        Do you have any idea for this ?
    Best Regards,
    Ken

    Hello Ken,
    Please check -
    Note 765763 Setting the upload/download codepage for a SAPGUI connection
    Note 882961 File download: codepage conversion error FES024
    Thanks

  • Currency could not be determined for person ?

    Hi,
    I have created in PA30 the "compensation process" subtype " Spot bonus" for an employee , but then when i changed the status in ECM ( Enterprise compensation management) ( From In planning -> Approved ,( OK) , Approved to " Active" I got the following error"
    "Currency could not be determined for person Nguyen Ngoc Ngan between 30.10.2007 and 30.10.2007"
    Please help me out with this
    Thank you very much

    Great Suresh , You are excellent !
    I have added a new record in the table T500C for my local currency i have tested successfully .
    But i face a small problem with " Salary adjustment" when i created in compensation process infotype the salary adjustment ( In planning ) it is ok , but when i change the status from "Approved to active " I got the following err ;
    "Salary adjustment of Nguyen Ngoc Ngan on 31.10.2007 could not be activated "
    ( Bonus worked fine ).
    Thanks

  • Getting Error "Pricing Procedure could not be determined" in CRM Functional

    Hi Experts,
        While creating Quotation for Products, am getting error message of  " Pricing Procedure could not be determined".
    Kindly reply, how 2 resolve this by steps-by-steps.
    Thanks..
    Edited by: poorav4293 on Aug 6, 2011 12:27 PM

    Hi,
    Go to SPRO-> IMG-> Basic Functions-> pricing. Here goto second node & select determine pricing procedure.
    Here check the combination....
    sales org-distribution channel-doc price-cust price-pricing procedure.
    Here see the corresponding pricing procedure which should be proper based on the condition types.
    Thanks!
    Aswith.

  • Batch Job for ME59N getting error SE133 - Net value could not be determined

    HI,
    We can convert the PO automatically when run manually tcode ME59N  successfully.
    But when We schedule a batch job to run ME59N (RM06BB30) to create AUTO Purchase order for services item Purchase requistion.
    Getting error message SE133 "Net value could not be determined".  PO canot be converted automatically.

    Hi,
    Price/ Net value not picking!
    Check  info record  based on  Material Group for your service PR which need to be converted to PO.
    Also check activation of  Automatic Purchase order creation for Service requisitions in t.code: ML91.
    Check vendor master , schema group of vendor and check MM pricing procedure, the availability of condition type for service master for service PO.
    For more please read note 635511
    Regards,
    Biju K

  • Error message while CREATING PO - PGrp could not be determined

    Hi all,,.
    We are on SRm 7. ECS.
    The issue we are facing is:
    WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
    Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM

    Hello,
    The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP  Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
    Then Try creating now a purchaser order directly .
    Regards,
    Neelima

  • PY error message - EE's salary group could not be determined for Plan Life

    We are running through Payroll errors when there is a Separation action being carried :
    u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
    On IT0168 the costs  are u20180u2019
    This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

    During the "Separation" action, does the employee change WT on IT0008?
    If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

  • Error:The grouping element could not be determined for project

    Hi,
    When I am trying to issue goods for a project,I am getting the following error
    "The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
    what may be the reason for this reason.
    Regards,
    Raju

    Hi,
    You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
    Muzamil

  • ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

    I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
    I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

    The fact that there is so many discussions with no clear answer is the problem.
    I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

Maybe you are looking for