Error "Price of goods mvt will become negative" in MFBF
Hi,
While doing Assembly Backflush for a material thru MFBF i am getting an error massage as "Price of goods mvt will become negative "
what could be the possible reason for this
Pavan
Hi Brahmankar,
When refereed your suggested SAP note it has the following explanation for REM
"In a rare case the system might display an error massage u201CM73030u201D "Price of goods mvt will become negative" during the confirmation for repetitive manufacturing.
The reason may be :
1) Stock shortage of components.
2) Rounding Problem during calculation of the confirmed material.
This is independent from Batch Management requirement of the material involved. We can prevent the system displaying this error massage u201CM7330u201D by calculating the stock value (MBEW-SALK3) again after a price change is performed through TXN-MR21.
-First post a price change with a slight different price (ex: Original price + 1/- Rs ) then Call up TXN-MR21 again and use the original price (New Price-1/-Rs)
If the problem continues even after doing this exercise we need to implement the u201CSAP NOTE: 730527u201D this note is applicable up to release 604"
Thank you for the quick suggestion
Pavan
Edited by: ch pavan on Apr 20, 2010 3:09 PM
Similar Messages
-
Goods Receipt Error: "Price of goods mvt will become negative"
Dear all,
When entering a receipt, the system is returning this error message: "Price of goods mvt will become negative": The goods movement was valuated at a negative price." (M7330)
In other threads in this forum, I read that this happens when if a receipt were posted, the value of the inventory would become negative - which the system does not allow. It seems that a solution may be to increase the material price in MR21.
But I would like to understand the calculation.
Material ABC is valuated at standard price.
We want to receive: 960 pieces of ABC
Total stock = 7,188 pieces
Standard price = 114.62 USD/1000 pieces
Moving average price = 143.87 USD/1000 pieces
Total stock value = 823.89 USD
Purchase price = 125.44 USD/1000 pieces
How does the system end up with a negative valuation?
Thanks,
Annabelle R.Hope you are using a version below 4.7. Please SAP Notes#172122 & 147761.
Moving average price negative
There a lots on OSS notes on this topic, what I suggested may not be the right one, request you to look for a suitable OSS based on your version and excat problem. -
In the case 161 : Price of goods mvt will become negative
Hi,
I am facing a problem, I have a scenario of return PO in which invoice has been done before GR(161).
delivery and GI having qty of 976 but by mistake done the GR with 1000 qty, So I have reverse the GR(162)
of 1000 qty but now when trying to post the GR(161) with 976 qty against outbound delivery, it's giving the below error:
Price of goods mvt will become negative
Message no. M7330
Can anybody guide me regarding this.Hi,
Please check below sap notes for the same
406097 - M7330, M7301 with GR for returns purchase order
1442299 -MIGO: M7330 for returns after invoice receipt
667193 -IS-OIL Returns of Purchase order items with excise duty
805799- MIGO: Returns valuated incorrectly after invoice receipt
Thanks & Regrads,
Sandesh Sawant -
Price of goods mvt will become negative
Hi exeperts,
While doing goods receipt MIGO I am getting error that "Price of goods mvt will become negative" As I analysed the purchase order is account assignment "K" PO and in material master no value exist with moving average price 0.
Please let me know how to solve this issue
Regards
MariaHi all ;
I think that there is a stock inconsistency. Note can be helpful: 1618888 - How to deal with stock inconsistency
Also, please check ;
Tips & Tricks about MM-IM*
Negative stock analysis ( Material Management Inventory [MM-IM])
However ; Go to SE38 , run MBSTOCK and analyse...
Regards.
M.Ozgur Unal -
Price of goods mvt will become negative-Message no. M7330
Hi,
While doing GR the system shows below message,
Price of goods mvt will become negative
Message no. M7330
Diagnosis
The goods movement was valuated at a negative price.
Quantity: 0,0000000000000000E+00
value : -5,9093000000000000E+04
System Response
The system does not allow this.
what needs to be done to overcome thisa issue.
PO:1
Short Text Movement Type Material Doc.Item Posting Date Quantity OUn Amount in LC L.cur GR/IR clearing value in local currency Amount
GR 101 1 27.04.2011 0,06 PC 4.960,200 EGP 0,000 4.960,200
GR 101 1 27.04.2011 0,068 PC 5.621,560 EGP 0,000 5.621,560
GR 101 1 27.04.2011 0,05 PC 4.133,500 EGP 0,000 4.133,500
GR 101 1 27.04.2011 0,01 PC 826,700 EGP 0,000 826,700
Entry Date 27.04.2011 0,188 PC 15.541,960 EGP
IR-L 1 10.05.2011 0,068 PC 5.678,000 EGP 5.621,560 5.678,000
IR-L 1 10.05.2011 0,06 PC 4.968,000 EGP 4.960,200 4.968,000
IR-L 1 10.05.2011 0,05 PC 4.147,000 EGP 4.133,500 4.147,000
AccM 1 10.05.2011 0,01 PC 0,000 EGP 826,700 0,000
Entry Date 10.05.2011 0,188 PC 14.793,000 EGP
AccM 1 11.05.2011 -0,01 PC 0,000 EGP 826,700 0,000
IR-L 1 11.05.2011 0,01 PC 840,000 EGP 840,000 840,000
Entry Date 11.05.2011 0,00 PC 840,000 EGP
=========================================================================================================
PO: 2
Sh. Text MvT Entry Date Pstng Date Quantity OUn Amount in LC L.cur Order Price Unit GR/IR clearing value in local currency Amount Crcy Delivery cost quantity Reference
GR 101 27.04.2011 27.04.2011 0,01 PC 1.138,286 EGP PC 0,000 1.138,286 EGP 0,00
GR 101 22.03.2011 22.03.2011 0,003 PC 330,734 EGP PC 0,000 330,734 EGP 0,00
GR 101 22.03.2011 22.03.2011 0,015 PC 1.653,672 EGP PC 0,000 1.653,672 EGP 0,00
GR 101 01.03.2011 01.03.2011 0,023 PC 2.506,770 EGP PC 0,000 2.506,770 EGP 0,00
GR 101 14.02.2011 14.02.2011 0,025 PC 2.724,750 EGP PC 0,000 2.724,750 EGP 0,00
GR 101 10.02.2011 10.02.2011 0,101 PC 11.007,990 EGP PC 0,000 11.007,990 EGP 0,00
GR 101 10.02.2011 10.02.2011 0,059 PC 6.430,410 EGP PC 0,000 6.430,410 EGP 0,00
Goods receipt 0,236 PC 25.792,612 EGP 0,000 25.792,612 EGP
AccM 10.05.2011 10.05.2011 -0,025 PC 0,000 EGP PC -2.800,335 0,000 EGP 0,00
AccM 26.02.2011 26.02.2011 0,025 PC 0,000 EGP PC 2.724,750 0,000 EGP 0,00
Account maintenance 0,00 PC 0,000 EGP -75,585 0,000 EGP
IR-L 10.05.2011 06.05.2011 0,01 PC 1.152,000 EGP PC 1.152,000 1.152,000 EGP 0,00
IR-L 07.04.2011 05.04.2011 0,015 PC 1.728,000 EGP PC 1.728,000 1.728,000 EGP 0,00
IR-L 07.04.2011 07.04.2011 0,003 PC 346,000 EGP PC 346,000 346,000 EGP 0,00
IR-L 22.03.2011 22.03.2011 0,023 PC 2.535,000 EGP PC 2.535,000 2.535,000 EGP 0,00
IR-L 07.03.2011 07.03.2011 0,025 PC 2.764,000 EGP PC 2.727,890 2.764,000 EGP 0,00
IR-L 26.02.2011 26.02.2011 0,101 PC 11.088,000 EGP PC 11.007,990 11.088,000 EGP 0,00
IR-L 26.02.2011 26.02.2011 0,059 PC 6.452,000 EGP PC 6.430,410 6.452,000 EGP 0,00
Invoice receipt 0,236 PC 26.065,000 EGP 25.927,290 26.065,000 EGP
regrd.....Hi,
Refer the following
Price of goods mvt will become negative
Error message M7 330. u201CPrice of goods mvt will become negativeu201D in MIGO
Regards,
Divya -
Price of goods movement will become negative...
hi friends,
i am facing a issue that cant post GRN for 3 line items..totally 46 line items are there...1,34,36 i cant post GRN...
GR 102 5035306439 1 01.03.2010 346,67- USD 1- M3 1.300,00
GR 101 5033242930 1 13.01.2010 346,66 USD 1 M3 1.300,00
Tr./ev. Goods receipt 0,01- USD 0 M3
please gelp me to resolve this?
thanks in advance...
regards,
VenkateshHi,
This looks like an inconsistency issue in your tables. I would suggest that you open a ticket at SAP, so that an expert can have a look into your system.
Best Regards,
Arminda Jack -
Error message M7 330. u201CPrice of goods mvt will become negativeu201D in MIGO
Hi Experts,
Good day!
I would like to ask question regarding transaction MIGO upon doing transaction MIGO i was able to arrive in an Error message M7 330. u201CPrice of goods mvt will become negativeu201D. Can you help me what are the cause why i arrived at the error?
Hope to here from you all.
~Thanks so much!
lourdHi,
Have look into the link, might be useful to resolve the issue.
I think this situation can arise only if u have allowed negative stocks, in such case , it is possible that fresh GR is making the MAP -ve which is not allowed. Then as suggested u have to do MR21 to revalue the material to ensure MAP does not become negative after fresh GR.
Check the OSS note
if you can't solve the problem with MR21 then pls apply the note430954 (report MBEKBEAN should be in the system),
Regards,
Aditya -
Price of goods mvt will negative
having issues in sap
the plant had to send the material which is in finish material code to other plant as raw material code
so i have to take the reversal of the prod. confirmation while doing this in mfbf ,
the error of price of goods mvt will negative
unable to complete the trsc.Check in Material Master why the price is negative.You can change the price through MR21 transaction.Take FI person help to investigate the negative price of the material.
-
"Prices of good Movement wiil be Negative."
While Doing GR i am getting error as
"Prices of Goods Movement Will Be Negative"
What could be the Possible Reason, Can it be somwhat related to Currency Conversion Factor but in this Case this may not be the Reason.
Please Suggest.
Thank you in Advance.Hi,
If its standard price control and you have purchase price less than the standard price and if the non-deductible tax component was used at the time of goods receipt
This issue will occur at the time of Return PO
PO already there and price control is changed
If the condition record maintained as negative
Please Check ......
Diwakar -
ECC 6.0 FI-AA Error msg AA480 The quantity on asset X will become negative
When trying to reverse an asset acquisition either from FI (AB08) or through a credit memo posting (ABGL), we get the error message AA480. Assets are quantity managed.
We have just upgraded to ECC 6.0 from 4.6C.
There are no relative notes for new release.
I will be greatfull if any one has any idea to solve the problem.
Thanks in advance,
LilySymptom
You post a complete retirement of a fixed asset that manages quantities. The fixed asset also permits negative values within at least one area. Next you attempt to reverse the retirement. The system displays error AA480 'The quantity on asset & & will become negative from this posting'.
Additional key words
XNEGA, AMSS_DOCUMENT_REVERSE, LAMDPU14, AA480, MENGE, MEINS
Cause and prerequisites
1. If the fixed asset contains negative values this results in positive amounts during the retirement.
2. The fixed asset manages quantities.
3. The cause is a program error.
Solution
Implement the source code corrections. -
MIRO Error - The price for material X will be negative
Dear All
When create invoicing in Tcode MIRO, have message error
The price for material X will be negative
Message no.C+131
Diagnosis
the system calculated a ngative moving avarage price for the material
System response
the moving avarage price is set to zero for material with price control S
Processing is terminate for materials with price control V, because the system is not set up to handle negative prices for such material
The message Error will solve, after there is new GR from vendor.
are there anyone can help my problem
regrads
imronDear Gregory Mathews,
thanks for your response
the price contrl for the material is set as 'V' and the standard price for the material is 0
And qty Stock < qty invoicing
My question is:
1. My stock < qty invoicing was caused by material used, whereas invoicing from vendor not yet come so that invoice created after material used, --> How to solve ?
2. I agree with your statement that "The error will come either if the price contrl for the material is set as 'S' and the standard price for the material is 0.
Or if there isn't enough stock coverage" --> how to solve for next time
regrads
imron -
The quantity on asset 0722 10001267-0 will become negative from this posting
Hi All,
while trying to reverse the document through AB08 for an asset, system was throwing an error message. Quantity will become negative.
i have checked in the asset master record the quantity field value is 0.
i am surprised why the system was referring to this..
Thanks & Regards
Mahender.Hi All,
Thanks for the reply,
this issue has been solved, i have tried using ABNA,
initially the document was posted , Asset master record quantity field value was 2 , later on they have changed to 1. now when i try to reverse this document through AB08 i was facing the issue.
when i changed the Quantity value field in Asset (master record AS02 ) to 2 then system was allowing to do the reversal of the document. -
EM C+ 723 Periodic unit price of the material will be negative
Hello All,
We have a problem in our production system , with the material ledger closing in transaction CKMLCP where for period 11 / 2011 the system has issued the error that u201CPeriodic unit price of the material will be negativeu201D for material ABCD in plant 1000.
The analysis shows an amount against 'Not Distributed' as a separate line above cumulative inventory.
We would like to know the reason for the error.
regards
MonaliDear Monali.
The error C+723 is not caused by a program error. It is issued when
the calculated price of a certain material would become negative.
The error occurs only for cycle materials because for materials that
are not in a cycle the system automatically applied a fallback strate
gy to avoid a negative price (by using a different price, for example
the actual price of the previous period or the standard price).
There are two options to deal with the error:
1) You can analyze the reason why the price would become negative.
For this you can use the error document which is created by
multi level price determinatio for the affected material.
(-> use transaction CKM3). The negative price is caused by
negative variances allocated during the period at the material
itself or at one of its input materials.
You can then analyze via CKM3 the postings done for this material
and do a correction posting or complete a missing posting (for
example a missing order settlement).
The long text of message C+723 gives more information.
After doing correction posting please repeat single and multi
level price determination.
2) If you have no time to analyze the error you can choose the
automatic error management for cycle materials.
In the variant maintenance of multi level price determination
choose Edit -> Show postprocessing options
In the frame 'Negative price: automatic error management you can
then check the box Cycle 'cut all connections'.
By doing this instead of issuing C+723 the system calculates
the cycle by cutting all connections. Thus the materials are
processed successfully, but no variances are rolled between
materials within the cycle.
The F1 help gives more information.
br, Guido -
Error(valuated stock becomes negative - see text) during CO15 confirmation?
Dear Experts,
I am running a CO15 for order confirmation and I got a error message ..Error(valuated stock becomes negative ->see long text).
This error I m getting randomly not regularly .I mean not for all produciton orders.
Please suggest me the solution .
Help would be appriciated.
Regards
SteveDear,
During the creation of new batch of material batch valuation , a "-"ve price is determined.the Symptom occurs under the following circumstances.
. Negative stocks are allowed
. The material to be handled in batches and subject to individual batch valuation
. A new batch and thus a valuation type may be automatically created during the posting of goods movement
. The material is valuated with moving average price
. At the time of posting the total of the values was positive for all valuation segments(Batches), But on the other hand the entire valuated stock was -ve or batch is -ve and stock is +ve.
. During the posting no external value was assigned for Ex from purchase order or from a production order or thru a manual entry.
After the posting of DOC which can result in the following problem
1) The posting of doc causes a data inconsistency Between MM and FI. The Gl A/Cs is posted in the credit while the value of the stock segment (Batch) is increased
Ref the Link:
Error "Price of goods mvt will become negative" in MFBF
Pavan
Edited by: ch pavan on Apr 23, 2010 4:48 PM -
Negative price of goods in MIGO
When I try to do MIGO I get an error "M7 330 Price of goods mvt will become negative"
Looking at PO History I notice there was a 101 and 102 for the same quantity but that ended up with different value, so that seems to be the reason of this wrong valuation. I have not found the reason for this.
For what I have read:
a) it could be fixed if I do an invoice for a greater quantity, do the GR and after that cancel the invoice.
b) i should not just change the message to warning in OMCQ since negative movements of stock should not happen
How should I tackle this problem?
Regards,
CarlosHi,
First remove GR based IV tick from PO , then Post dummy Invoice for more value , post GR with ref.to PO , then cancel IV
For more details refer to note 372246
Thanks
Diwakar
Maybe you are looking for
-
Home Sharing w/ One Computer & Multiple iTunes Libraries
I have a Mac Pro that I am using as a iTunes media server for my home entertainment network. This computer has two user accounts. Each user account has it's own iTunes Library. One is for my kid's movies and the other is for my wife and I's movies. I
-
I have Time Machine backup on an external drive. I want to mirgrate all my files onto the new Mac Pro but migration is getting hung up and cant find the drive. Can I set up Time Machine for the new mac on this same drive and then select the old macs
-
How to ensure a record is created in a block linked to a detail block?
Hi All, I am stuck. In my form I have a master block (blockA), a detail block (blockB) and a third block (blockC) that is linked to blockB via a standard relation on blockB where blockB.id = blockC.id. In blockB if column adtype = 'P' then the requir
-
Need a count for number of emails
Hi, I need a count of emails coming to a mailbox in a specified date range. And i want that to be exported in an excel file. I was able to get the total count in a specified folder using the below cmdlet in PS but couldn't get during a specific time/
-
When you download a movie or tv show on a macbook pro with retina display where does it go?
Where do downloaded movies and tv shows go once downloaded on a mac book pro?