"Error - Printing" for only certain PDFs to certain printers with Reader 10.1.3
One of my users is unable to print specific PDF files to a particular printer. The same PDFs will print to other printers successfully from the Windows 7 machine. But, for certain PDF files the printer queue will show status = "Error - Printing". We have tried to print as image, saved the PDFs as different filenames but it still fails. There seems to be no pattern for the PDF types. One PDF is a scanned document and another is not scanned. The machine is able to print most other PDF files just fine to this printer and can print successfully from all other applications except for Reader 10.1.3 for these certain PDF files. The printer driver has been updated to the latest. The printer is a Xerox DocuCenter-IV 2060. AR 10.1.3 has been re-installed.
The PDF files in question open fine and can be viewed in their entirety (i.e. they don't appear to be corrupt). The fonts used are not any different from others used in PDFs that DO print ok. This is a complete mystery so, if anyone has ideas, please pass them along. Thanks so much
This is a public forum; please do not post your email address or other private information.
Regarding your issue; it appears you have already tried everything possible - I have no other ideas what to try with 10.1.3.
The only solution for now I can see is to revert back to 9.5.1; is this a problem for you? This should be only temporarily until a new version of 10.x or 11.x becomes available.
Similar Messages
-
Display webpage for only certain time.
Hi,
I want to display a new webpage from a link for only certain amount of time and get back to original webpage(dont care about the size of webpage).
I know to do in javascript but i was wondering if it is possible using JSP & servlets.
appreciate any reply.
Thank you.My application for mobile browsers which are not powerful enough to handle java script so need to handle everything on server side. any solution,suggestions please
-
Viewing print thumbnail only works after a TAB in adobe reader X
Hello,
Viewing print thumbnail only works after a TAB in adobe reader x.
In adobe reader 9 when you go to a specified page (the red circle in the screenshot), the example on the right site directly go´s to that page,
In adobe reader x when you go to a specified page nothing happend in the example, when you then use the TAB then de example wil go to the specified page.
Is this a incident in Adobe Reader X ?
On myPDF files have to be specially enabled for you to save the contents. It appears the old version of these files had this capability, but the new version does not. Without Acrobat you will be unable to save the files. If these are truly government files, you can try going to the government's website and see if you can download a copy that will allow you to save the form field data.
-
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
Why cant i change user password or pwdlastset after delegation for only certain users in an ou?
I remembered a while ago I used delegate control to assign the ability to reset pwd and reset change on next logon. It seems to work for some users but not others in same ou. effective permissions shows I have write access to the attribute for
the user; see imgur link below. the box for change pwd at next logon is gray. attribute editor tab doesn't allow me to edit it either. domain admins can change it. I'm wondering what else I should check out cus everything I know says
I have the right to change it.
forest / domain level 2003
http://imgur.com/1VHuh7h
mydomain\Allow Reset Win Pwd was used for delegation and the user trying to change the password is a part of that group. they are also a member of account operators
Owner: mydomain\Domain Admins
Group: mydomain\Domain Admins
Access list:
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Allow mydomain\Domain Admins SPECIAL ACCESS
READ PERMISSONS
WRITE PERMISSIONS
CHANGE OWNERSHIP
CREATE CHILD
DELETE CHILD
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
LIST OBJECT
CONTROL ACCESS
Allow mydomain\Enterprise Admins SPECIAL ACCESS
READ PERMISSONS
WRITE PERMISSIONS
CHANGE OWNERSHIP
CREATE CHILD
DELETE CHILD
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
LIST OBJECT
CONTROL ACCESS
Allow BUILTIN\Administrators SPECIAL ACCESS
DELETE
READ PERMISSONS
WRITE PERMISSIONS
CHANGE OWNERSHIP
CREATE CHILD
DELETE CHILD
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
LIST OBJECT
CONTROL ACCESS
Allow NT AUTHORITY\Authenticated Users
SPECIAL ACCESS
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Allow NT AUTHORITY\SYSTEM FULL CONTROL
Allow mydomain\Allow Reset Win Pwd SPECIAL ACCESS <Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS <Inherited
from parent>
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Allow BUILTIN\Terminal Server License Servers
SPECIAL ACCESS <Inherited
from parent>
READ PERMISSONS
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
Allow mydomain\Enterprise Admins FULL CONTROL <Inherited from parent>
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS <Inherited
from parent>
LIST CONTENTS
Allow BUILTIN\Administrators SPECIAL ACCESS <Inherited from parent>
DELETE
READ PERMISSONS
WRITE PERMISSIONS
CHANGE OWNERSHIP
CREATE CHILD
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
LIST OBJECT
CONTROL ACCESS
Allow mydomain\Delegate-Join-Domain-Rights
SPECIAL ACCESS for computer
<Inherited from parent>
CREATE CHILD
Allow Everyone SPECIAL ACCESS for computer <Inherited from parent>
CREATE CHILD
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Account Restrictions
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Account Restrictions
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Logon Information
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Logon Information
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Group Membership
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for General Information
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for General Information
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Remote Access Information
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Remote Access Information
READ PROPERTY
Allow mydomain\Cert Publishers SPECIAL ACCESS for userCertificate
WRITE PROPERTY
READ PROPERTY
Allow BUILTIN\Windows Authorization Access Group
SPECIAL ACCESS for tokenGroupsGlobalAndUniversal
READ PROPERTY
Allow BUILTIN\Terminal Server License Servers
SPECIAL ACCESS for terminalServer
WRITE PROPERTY
READ PROPERTY
Allow mydomain\Allow Reset Win Pwd SPECIAL ACCESS for pwdLastSet <Inherited from parent>
WRITE PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Account Restrictions
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Logon Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Group Membership
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for General Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Remote Access Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Terminal Server License Servers
SPECIAL ACCESS for accountExpires
<Inherited from parent>
WRITE PROPERTY
Allow BUILTIN\Terminal Server License Servers
SPECIAL ACCESS for Terminal Server
License Server <Inherited from parent>
WRITE PROPERTY
READ PROPERTY
Allow NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
SPECIAL ACCESS for tokenGroups
<Inherited from parent>
READ PROPERTY
Allow NT AUTHORITY\SELF SPECIAL ACCESS for Private Information <Inherited from parent>
WRITE PROPERTY
READ PROPERTY
CONTROL ACCESS
Allow Everyone Change Password
Allow NT AUTHORITY\SELF Change Password
Allow mydomain\Allow Reset Win Pwd Reset Password <Inherited from parent>
Permissions inherited to subobjects are:
Inherited to all subobjects
Allow mydomain\Enterprise Admins FULL CONTROL <Inherited from parent>
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS <Inherited
from parent>
LIST CONTENTS
Allow BUILTIN\Administrators SPECIAL ACCESS <Inherited from parent>
DELETE
READ PERMISSONS
WRITE PERMISSIONS
CHANGE OWNERSHIP
CREATE CHILD
LIST CONTENTS
WRITE SELF
WRITE PROPERTY
READ PROPERTY
LIST OBJECT
CONTROL ACCESS
Allow mydomain\Delegate-Join-Domain-Rights
SPECIAL ACCESS for computer
<Inherited from parent>
CREATE CHILD
Allow Everyone SPECIAL ACCESS for computer <Inherited from parent>
CREATE CHILD
Allow NT AUTHORITY\SELF SPECIAL ACCESS for Private Information <Inherited from parent>
WRITE PROPERTY
READ PROPERTY
CONTROL ACCESS
Inherited to group
Allow NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
SPECIAL ACCESS for tokenGroups
<Inherited from parent>
READ PROPERTY
Inherited to computer
Allow NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
SPECIAL ACCESS for tokenGroups
<Inherited from parent>
READ PROPERTY
Inherited to group
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS <Inherited
from parent>
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Inherited to inetOrgPerson
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS <Inherited
from parent>
READ PERMISSONS
LIST CONTENTS
READ PROPERTY
LIST OBJECT
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Remote Access Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for General Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Group Membership
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Logon Information
<Inherited from parent>
READ PROPERTY
Allow BUILTIN\Pre-Windows 2000 Compatible Access
SPECIAL ACCESS for Account Restrictions
<Inherited from parent>
READ PROPERTY
The command completed successfullyI think this is a problem with the user object rather than the ou. Reasoning is that I can reset a password for a user in the same OU but not for another user in the same OU. Two users, same ou. I can reset one but not the other.
Effective Permissions shows I am granted permisiion to do so.
I believe the error was access denied when we tried to change the password via vbscript.
@seansobey - I applied the delegation at a ou higher in the tree. I forget how I had it apply down the tree but I confirmed that the acl is correct
and applied to the user
@Travis Vogel - It looks like the user with this problem is a part of Domain Users. I think the ACL is applied to the user because it shows in
the security window and effective permissions shows I have permission to reset the password. However, I see this other user is a part iof the builtin user group and the problematic user account is not. I may try adding the problematic user account
to that group and testing. It'll have to wait until tomorrow though. -
"General Error" and "Out of Memory" for only certain files?
I have Final Cut Express 4 on Mac OS X Leopard and it has been working fine, up until now.
For some reason, when I try to view two clips in the tab to the left of the screen to find sections of them to put into my project, I get a message that says, "General Error" and when I click okay it says, "Error: Out of Memory". They are both mp4 files, and are 242.9 MB and 294.2 MB, and I have viewed them both on Quicktime. I don't understand why it is saying that it is out of memory when I still have 7 GB left on my computer and it still lets me view and add other files into my sequence.
Can someone help me out and tell me how to fix this? I'd really appreciate advise!MPEG-4 is not a format that works in FCE. You'll have to convert it to one of FCE's format. Without knowing details about what the original format is it's impossible to say what you should convert it to.
-
Silent override setting for only certain people?
There is one thing stopping me from buying an iPhone and I'm really hoping somebody has a fix for me. On my Blackberry, I'm able to assign a ringtone and volume to certain people...making it possible to switch my phone to silent when I go to sleep, and only 2 people will wake me up if they call. I work nights and am on call. I CAN'T buy an iPhone until this is possible :0(
There is a way to create a silent ringtone. I am sure there is one on iTunes. If the 10,000 free ringtones app still works it had one. Or you can create the ringtone through the Voice Memo.
Then you could assign only those two people their own ringtone- and then when you don't want to be bothered switch the generic ringtone to the "silent" one that you created. -
IPhone loses playcount for only certain songs
I have been having a bizarre problem ever since I upgraded to iOS 6 on my iPhone 4S. Every now and then, when I sync the phone with iTunes (running on a Windows 7 system), the play count for some songs is completely lost. The last played date/time is properly updated, but the play count disappears.
I use a smart playlist that only plays songs that have been played less than X times and which haven't been played in the last week so that I guarantee that I will go through my entire library. When my smart playlist has no songs left in it, I edit it to increase the "playcount less than" by 1, and all the songs show up again for my next pass through them. I was up to having songs played 20 times (this goes back to my first iPod in 2006), but then I noticed that some of them were showing up on my smart playlist again, When I looked more closely, the 19-20 plays were gone - the play counts were just blank. The last played was correct, though.
This was not consistent - it happened for one entire album at one time (weird, since the songs played at widely-separated times over the course of a month), but otherwise only for a few songs here and there, and they were getting lost at seemingly random times after a sync. So, I thought that maybe my play count metadata was somehow corrupt. I reset the play counts for all my music to 0, and then started over (with a playlist that only includes songs played less than one time). This had no problems for several weeks, but I just today noticed a song that showed up again on my smart playlist. It was last played on January 15th, but it has no play count even though I haven't reset them since January 3rd. There were plenty of songs played immediately before and after it on that same day, and they still show a play count of 1, but this one song shows nothing.
Has anyone else seen this? I have been relying on the play count for my smart playlist since I got my first iPod 7 years ago, but if it's not going to work any more, then that's going to cause me a real problem.For what it's worth, and for the benefit of anyone else searching for this problem who comes across this thread, I think I've come up with a solution for the "resetting play count" bug, or at least the version I've been seeing.
As various people have pointed out in this thread the problem is related to iTunes Match, which I have enabled in order to have access to my whole library on my iPad. I don't use Match on the iPhone because I want to be able to control its contents with Smart Playlists.
It was incompatibilities between these two systems that lead to my problems with play counts, or Plays as Apple now calls them. No matter what I tried there were several albums and a handful of individual tracks that would keep randomly resetting their Plays to zero and thus populating themselves onto my Unplayed playlist where they didn't belong. More often than not this would happen when my iPhone had been switched off and on, or when iTunes Match was updated manually.
What follows are the only solutions I've found that seem to eradicate this problem. They're annoyingly fiddly, but I've had 100% success with them over the last couple of days.
The short version (for iTunes experts or those who want to find their own method):
Delete the problematic tracks from iCloud.
Set their Plays to non-zero in the local library.
Add them back to iCloud with a non-zero initial Plays count.
The step-by-step version using two machines (very reliable):
To use this method you will need to have two Macs or PCs running iTunes and iTunes Match; a "master" machine that holds all of your media and your main iTunes library, and a "slave" machine with an otherwise empty iTunes library linked to the iTunes Match account. An iOS device will not work for this because it won't let you delete tracks from iCloud.
It might be possible to use a Virtual Machine or even just a second, empty, iTunes library as the slave but I haven't tried this and it would be exceptionally time consuming, especially the two-libraries method with all the switching. I just used an old laptop I had lying around.
Make sure that iTunes Match is active on both machines using the same Apple ID. The slave machine, having no media of its own, should only be showing iTunes Match songs in its library.
In the libraries of both machines use the search box to find some tracks for which the Plays keep resetting. You need to be looking at the same tracks in the main library on each machine, not in a playlist. Use the Songs view so you can see as many columns as possible.
Make sure that the iCloud Download, iCloud Status and Plays columns are all visible on the master machine's library (right-click the column header and select them if they aren't).
On the slave machine, highlight the problematic tracks and hit Delete. Because the tracks aren't stored locally, iTunes will ask you if you want to delete them from iCloud instead. Confirm the deletion.
The tracks will disappear from the slave machine's library. Wait a few seconds and the tracks' iCloud Status on the master machine should change from Matched (or Uploaded) to Removed and the iCloud Status icon should change to a cloud with an X inside.
On the master machine, highlight the Removed tracks and reset their Plays to 1. If you're running Windows you can use the script mentioned in the posting above, otherwise you will have to play each track and use the scrubber control to jump to the end. Continue until each track is showing a Plays count of 1.
Still on the master machine, select the newly updated tracks, right click and choose Add to iCloud from the menu. iTunes match will report that it is "sending information to Apple" followed eventually by "waiting for Apple to deliver your iTunes Match results", and the iCloud Status will change to Waiting.
You may have to wait a while as the iCloud data is updated, especially if the track can't be matched and have to be uploaded. After a few minutes the iCloud Status for the tracks should change to Matched (or Uploaded) and they should also reappear in the slave machine's library.
Repeat for any additional problematic tracks.
The step-by-step version using one machine (potentially less reliable):
This method may appear simpler than the one above because it only uses a single machine, but in my experience it requires certain tasks to be done in a timely manner if it's to be successful and it's very easy to do the wrong thing at the wrong time or drag-and-drop the wrong file and screw things up. I prefer the two-machine method but if you don't have access to a second machine this is, sadly, the only way.
Note also that these instructions are for Windows, and will vary slightly for the Mac. For instance I believe the Show In Windows Explorer option has a Show In Finder equivalent on OSX, and the Recycle Bin is called Trash. Beyond that I have no idea as I'm not an OSX user. If you're on a Mac, be sure you know what you're doing before you try this method.
Make sure that iTunes Match is enabled in iTunes.
In the iTunes library use the search box to find some tracks for which the Plays keep resetting. You need to be looking at the tracks in the main library, not in a playlist. Use the Songs view so you can see as many columns as possible.
Make sure that the iCloud Download, iCloud Status and Plays columns are all visible (right-click the column header and select them if they aren't).
Select a problematic track, right-click and select Show In Windows Explorer. This will open a window containing the actual MP3 or AAC file (or files if there are multiple tracks that are part of the same album). Leave this window open and available.
Back in iTunes, highlight the problematic track or tracks whose files are in the Explorer window and hit Delete. In the dialog that appears, tick the box labelled Also delete this song from iCloud then click Delete Song(s).
Another dialog will appear asking if you want to move the files to the Recycle Bin or keep them. Click Keep File(s).
Wait a few seconds for the track(s) to disappear from the iTunes library. If you have another machine or iOS device linked to the same iCloud library you will see the tracks disappear from there as well.
Go to the window you opened in the earlier step and drag-and-drop the relevant MP3 or AAC file(s) onto the iTunes window. The deleted track(s) should reappear in the library with an iCloud Status of Waiting.
Using either the script method mentioned in the earlier post above, or by playing each track and scrubbing to the end, make sure that the Plays count is made non-zero for each newly added track.
It is VITALLY IMPORTANT that you do this quickly before iTunes begins to update iTunes Match with the track information. If you're not quick enough, iTunes will update the tracks in iCloud with an initial Plays count of zero and you can find yourself right back at square one with tracks whose Plays keep resetting. Trust me, I've seen it many times. If you feel you might not get all of the Plays set to non-zero values quickly enough, consider yanking the network cable out of the computer while you're doing this bit. I'm not kidding. Once iTunes starts uploading that data it's anybody's guess as to whether the Plays counts will stick or not.
Once all your Plays are non-zero, wait (plug the network back in if you pulled it!) and after several seconds iTunes will start to display a series of feedback messages in the display window starting with "Sending information to Apple" and will conclude by matching your track(s) to iTunes and uploading if necessary. These operations may take considerable time especially if there were many tracks added simultaneously. Once concluded the iCloud Status for the track(s) should change to Matched or Uploaded.
Repeat for any additional problematic tracks.
Please note that I've only used these methods to work around the intermittent resetting of Plays. For other issues raised in the thread linked above, including the loss of Last Played dates, these methods may be of limited use or no use at all but they may serve as a jumping off point for others to find their own solutions.
I've still got no idea what causes certain tracks to suffer from phantom Plays resets in this way, although I did do an awful lot of switching iTunes Match on and off on various devices when I first subscribed so it's possible I'm at least partly responsible even if it's ultimately an Apple bug that's manifesting. All I know is that for the first time in months I'm reasonably confident that my Unplayed playlist won't suddenly repopulate with old tracks.
I pray the next few days don't prove me wrong. -
"save as jpeg" not working for only certain images (pse 2.0)
I've searched for hours, trying to figure this issue out, but there seems to be no answers to my particular perdiciment. So I guess I'll start a new discussion with hopes to find any answer that can lead me in the right direction. For some reason, I am now getting a program error when I try to save some images as jpegs. It seems that only a small percentage of my pics are having this issue, and they are the ones I have taken in the past two days. I can go back into my catalog and run any other pics through PSE and save as a jpeg with no problems. But if I try to do any touch ups on any of the pics from yesterday or the day before, i get the error message. I can even go back into lightroom 4 and export any pics from 3 days ago and have no issues saving them as jpegs. I always get the option to save as a jpeg, it just errors out while trying to save. I'm using a somewhat older laptop w/ vista 64 bit. If anyone can help me out I would greatly appreciate it. If you need any more info, just let me know and I'll try to reply as fast as I can.
Thanks in advance!I just saw the end of your subject: Are you really using Photoshop Elements 2?
If you Save As – A Copy and use a different name does the save work?
Is there some background process that is analyzing the original files, either a system-cloud backup or a PSE photo analysis for heads or other things, that might have the file momentarily in use and therefore be unwritable?
Is your system almost out of memory, or is the hard-drive almost full or does the hard-drive have errors, or is the destination hard-drive something across a network or USB connection and that connection is iffy? -
As the question explains, some of the icons for visited sites appear only as a dashed rectangle. There are several bookmarks that have been successfully imported from an html file and a few of them have no icon showing on the Firefox toolbar or bookmark list yet they did on the original browser where they wre imported from. Typically, the icons will "fill in" when each of the imported sites are visited some some do not regardless of how many times visited.
I have checked to make sure that the fonts and colors are being selected by the site/server so that is not the problem.
Although it is a somewhat cosmetic feature (navigation works fine, just no icons), the icons make site recognition much faster visually, making browser that much faster and easier on the eye.
Any help to resolve this issue would be greatly appreciated for a "second-time-around" Firefox user.The reloader did the trick! Not sure why it took the add-on to get the correct favicon but problem solved, easily and quickly. I'll be sure to recommend the Firefox/Mozilla Support Forum to friends that use the browser. Thanks!
-
Is there a way to make Mail app badge to show the count of unread mail for only certain account?
The mail app badge normally shows the total count of unread emails in all your accounts. Is there a way to set it so that it only displays the count from one specific mail account?
No.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf WYSIWYG -
Mail sound for only certain accounts
Hi. I would like to only hear the new mail sound for some accounts and not others. Is there a way I can set this up in the latest version of Mail??
thanx.I'm not aware of any available sound setting that is account specific but you might take a look at creating a rule by account. I have a rule to play a different sound with recieving a message from a particular email address.
-
Exchange 2007 Export-Mailbox Error Message on only certain mailbox
I have searched high and low for a solution to this, but no such luck. Hopefully someone has had the same issue and can help me out.
I am attempting to export and then remove a date range for mailboxes before I migrate to an Exchange 07 server. The mailboxes range in the 10 GB range. I am attempting to use the Exchange 2007 cmdlet to do this with due to it does not have a 2 GB limit like the Exmerge of past.
The command I am using is as follows:
[PS] C:\>Export-Mailbox -Identity User -StartDate "01/01/07" -EndDate "01/30/08"
-IncludeFolders "\Inbox","\Sent Items" -PSTFolderPath c:\PST\pst.pst
This command works fine on some of the mailboxes in the Exchange03 system. But on some of the mailboxes I am getting the following error.
Error occurred in the step: Moving messages. Failed to copy messages to t
he destination mailbox store with error:
MAPI or an unspecified service provider.
ID no: 00000000-0000-00000000, error code: -1056749164
Any ideas?Hello Joe Rod (and others)
Thought I'd bring this over as a cross post because no-one seems to be picking it up in the 'admin' section. I believe I'm having a similar issue to yourself, as detailed below:
Hi all,
I've already posted this same question elsewhere, but if anyone here can resolve the issue or suggest a better way (without using archiving software - yet!), I'd be most grateful. I'd even be happy if someone can replicate the problem so I know I'm not going mad... I'm trying to set up a quick & dirty quarter year pst mail archive for one of our users on our Exchange 2007 (SP1) box. Using the command:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -enddate "01/03/2007"
I come up against this error:
Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164
Which I understand is a fairly standard permissions error. Problem is that I know the permissions are set correctly, having tested the function by removing the -enddate parameter; and getting a successful export.
I worked out after a while that the command seems to fall over when it hits a subfolder, so I tested this by using the -includefolders parameter. The command:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -includefolders '\inbox' -enddate "01/03/2007"
will fail if there are any subfolders under '\inbox'. Add the names of the subfolders:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -includefolders '\inbox\subfolder1' -enddate "01/03/2007"
and as long as those subfolders don't have any subfolders, I will get a successful export.
Any help appreciated.
Cheers
Dan
If anyone is able to replicate this, please let me know, I'd love to get this sorted. If it is a known problem - can I use someone's PSS contact please?! -
Lighttpd https redirect for only certain directories
This works great for redirecting all traffic to https on my home server:
# Redirect all http requests to https
$SERVER["socket"] == ":80" {
$HTTP["host"] =~ "(.*)" {
url.redirect = ( "^/(.*)" => "https://%1/$1" )
However, I'm trying to exclude one directory from this (other people using it, self-signed ssl messages...you get the idea ) and I can't quite wrap my brain around it. Server Fault and Stackoverflow had some examples that were close, but I couldn't manipulate them into doing what I wanted. A gentle shove in the right direction would be much appreciated.
Very simple layout: /srv/http/<dir1> /srv/http/<dir2> /srv/http<dir3> etc. Call it 'foo-dir' that I want to exclude. The server sits behind a consumer router with all port 80 and 443 traffic directed to the server's static IP. External IP via dyndns.
Thanks!
ScottSFTP is a subset of SSH. Currently Apple uses OpenSSH which does not have any kind of chroot jail for SFTP as it does for FTP. If you want to have an SFTP chroot jail, you will need to do some alterations. Currently there are two methods which are documented here:
http://www.schwie.com/brad/macosxsftpchroot/
Mac OS X (10.4.4) -
Authorization messages for only certain songs?
two songs I recently downloaded repeatedly ask for computer authorization and when I do it says this computer is already authorized but when I try to play them the same message comes up? Others I download work fine?
They’re corrupt. Delete and redownload them if doing so is free in your country.
(111788)
Maybe you are looking for
-
In some mailboxes, very slow opening/deleting emails. In other mailboxes it works just fine
In my inbox, very slow opening some (not all) emails. To delete the problem emails takes 40-50 seconds. Also, I keep marking many emails as "junk" and yet I keep getting maile from those spam senders. Also, these problems happen in some of my local f
-
Elements 12 for MAC won't open new files or save to any format
After using for a few weeks, I have had a few crashes, but this morning, I could not save a photo "Due to program Error" (no codes etc). Closing out that file and losing the edits, but now I cannot open any new file?!? Again "due to program Error". W
-
Could not get VHB/MDB at block on USB Thumb drive
I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teac
-
Why has my Safari and MAIL slowed after upgrading to Mountain Lion on my MacBookPro ?
Why has my Safari and MAIL slowed after upgrading to Mountain Lion ? I have mid-2009 MBPro and have very fast Internet access router.
-
When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?