Error printing in Reader X

I was printing a PDF using Adobe Acorbat Reader X. I printed one doucment just fine. Then when I selected the second document I got an error "The document could not be printed." Then a second error "There were no pages selected to print." I closed Reader and then opened it to try and print and got the same result. I went to your forums and tried printing from the Thumbnails as recommended and that did not work. I tried a "Repair Acrobat and that did not work." I was in dire straits as I needed to print the document, sign and mail it. I went to another computer using Reader 9.0 on a different printer and the document printed. I don't understand why one document would print and the second would not. I had tried printing the document from a web page using IE 9, and then I saved the document to my local computer, tried to print again and got the same results.
Is there a way to prevent this problem from happening in the future?
I am using a wireless connection to print from my new lenovo laptop, 64 bit, Windows 7 Professional. To an HP photosmart 8200 series printer. Since this a new computer I had recently installed the drivers for the HP printer, I have not had any other problems other then this one time using Reader X.

Please repost in the Designer forum. This can only be fixed via Designer.

Similar Messages

"Error - Printing" for only certain PDFs to certain printers with Reader 10.1.3

One of my users is unable to print specific PDF files to a particular printer. The same PDFs will print to other printers successfully from the Windows 7 machine. But, for certain PDF files the printer queue will show status = "Error - Printing". We have tried to print as image, saved the PDFs as different filenames but it still fails. There seems to be no pattern for the PDF types. One PDF is a scanned document and another is not scanned. The machine is able to print most other PDF files just fine to this printer and can print successfully from all other applications except for Reader 10.1.3 for these certain PDF files. The printer driver has been updated to the latest. The printer is a Xerox DocuCenter-IV 2060. AR 10.1.3 has been re-installed.
The PDF files in question open fine and can be viewed in their entirety (i.e. they don't appear to be corrupt). The fonts used are not any different from others used in PDFs that DO print ok. This is a complete mystery so, if anyone has ideas, please pass them along. Thanks so much

This is a public forum; please do not post your email address or other private information.
Regarding your issue; it appears you have already tried everything possible - I have no other ideas what to try with 10.1.3.
The only solution for now I can see is to revert back to 9.5.1; is this a problem for you? This should be only temporarily until a new version of 10.x or 11.x becomes available.

What do i do when my screen on my printer is reading error:0xb9634411?

My screen on the my printer is reading Error:0zb9634411 and then below says 165:hw_interrupt_hwv2.c How do I fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Error printing with Windows 7 even after unistalling old and installing new driver

I recently updated to 64-bit Windows 7 and cannot get my HP OfficeJetJ4580 working after the upgrade. I uninstalled all prior printer drivers and ran the recommended software from the HP site to ensure there were no remaining drivers on my system, then installed the updated drivers for use with WIndows 7. The driver isntallation said it was successfula dn that my printer was ready for use.
When I try to print, the job is sent to the print que. The print que immedialtely notes "Error printing" and deletes the job from the que. The printer never responds or tries to print. This happens with anything I try to print, including a test page. No error message is dispalyed on my screen. The only way I can see the error is by opening up the print que and looking at the pending jobs. I went to the HP support center and downloaded and ran the printer diagnostic sofware they had on there. It could not detect any problems with the printer.
I am at a complete loss as to what to try next.

Hello PPN, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into installation issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I'd recommend putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
After the computer has been put in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

User can't print from Reader, tried multiple troubleshooting steps

Working with a client who can no longer print from Reader (v11.0.10). Windows 7 Pro x86 machine. Tried printing after each of the following steps:
Rebooted PC
Restarted Print Spooler service
Uninstalled/Reinstalled Reader v11 (from fresh download)
Set PDF/A option to "Never"
Set Advanced option for "Print as image"
Uninstalled v11 and installed v10 (from fresh download)
Set v10 option to "Print as image"
In each instance, the printer queue shows no activity following a print command from Reader. No document is hanging or even appearing in the queue.
Test prints from other applications (MS Excel) and from the printer properties Test button both work flawlessly. When test printing from other apps, the documents are briefly visible in the print queue.
She gets no error message. It simply does not print. Have attempted with multiple documents and sending to different printers.
Next step is going to be installing third-party PDF reader software and scrapping Reader altogether. Please advise if there are any additional troubleshooting steps before abandoning this product.

No dice. Tried disabling protected mode and still could not print.
Installing Foxit Reader (http://www.foxitsoftware.com/Secure_PDF_Reader/index.php) so at least user can print PDFs. I will keep monitoring this post for any further suggestions anyone may come up with.

HP LaserJet Pro P1102w printer "Ready" for wireless printing, but gives "error -- printing" message

This P1102w printer was configured for wireless printing from two computers (WinXP and Win7), both with a network sharing designation, and all functions worked perfectly:
Printing from the WinXP computer directly, and from a networked Win2K computer as a guest.
Printing from the Win7 computer directly, and from a networked Win2K computer as a guest.
Windows Printer Test Pages were printed from both installed computers, showing correct computer names, the printer name, Port names (IP addresses), Data format (IMF), Driver information, etc.
Several days later (after new boots), the WinXP computer showed printer status as being "Ready", along with the correct printer "Type" (HP LaserJet Professional P1102w), "Where" (IP address), and "Comment" (network printing). When a print job was submitted from Microsoft Word, the control-panel printer window first showed the message "printing", and then the message "error -- printing". Nothing was printed. The same results occurred when a print job was sent to the WinXP computer from the networked Win2K computer. HP’s troubleshooting routine did not identify the error, its cause, or what can be done about it.
Successful printing continued, as before, from the Win7 computer directly, and from the networked Win2K computer to the Win7 computer as a guest.
The printer’s blue “i” network indicator lamp is lit, and all three computers continue to communicate through the hub to each other and to the Internet.
HP’s printer installation program was executed on the WinXP computer, using the “fix” option, but nothing changed. The installation program was executed again on the WinXP computer, using the “new install” option (without removing the existing P1102w installation); the “browse” function saw the network, but no printers were found, and the installation could not be completed.
This is very perplexing. Any suggestions?
PS: The same problem occurred once before, and it was fixed by resetting factory defaults on the printer, hard wiring the printer to the WinXP computer through a USB cable, re-installing the printer’s wireless settings from HP’s installation disk, and repeating all of the networking and sharing setups on all three computers. This is a lot of work that is not worth repeating, because the successful results have not been permanent.

To: Neonskeleton,
Thanks for your response -- especially because you are an HP employee!
My Win2k machine does not use HP software, nor communicate to the HP printer. (HP did not write a Win2k driver for the P1102w -- and evidently no one else has done this, either.) My WinXP and Win7 machines use their HP drivers to send print jobs to the P1102w wirelessly, and both machines have the P1102w set up as a shared printer. Then, when I connect to those machines as a "guest" and submit a print job to those machines, those machines receive the print job and then communicate with the printer using the proper installed printer drivers.
Everything worked great with this configuration, until suddenly the printer was no longer responsive to ANY jobs coming from the WinXP machine, even though there was a "printer ready" indication on the WinXP machine, and even though the printer responded perfectly to print jobs coming from the Win7 machine.
When I tried to "fix" the WinXP setup by running HP's setup program on CD, nothing changed. Then, when I tried to reinstall the WinXP setup for wireless printing, the program insisted that I reset THE PRINTER'S factory defaults and proceed using a USB cable -- even though I wanted to simply ADD the computer for wireless communication to an existing networked printer! I would conclude that something screwed up the printer's inner settings (maybe an unsolicited and invisible HP update sent to my printer from the Internet?).
As I mentioned in my original post, I went through this process once before, reinstalled everything on all machines, and all was well. Until THE SAME non-recognition problem surfaced again!
I do not want to spend any more time on this. I went to Staples and bought a second P1102w printer (it is a nice little machine that uses a xerographic cartridge, rather than costly inkjet cartridges that frequently plug up). I'll use a USB cable for the connection, rather than the installed wireless feature, and set up the P1102w as a shared printer. I expect that all of my other computers will be able to link as a "guest" through the wireless hub and be able to print.
Thanks again.
PS. I am a retired computer-systems manager from Northrop Grumman.

Hp officejet pro 8500a - get "error - printing" on all documents

Quick history:
Both my laptop and my printer HP Officejet Pro 8500 A910 have been working happily for months, with wireless connection via Belkin wireless hub.
> Had printer jam errors - so just replaced printer under warranty - completed set-up - printed test pages - wireless connection ok (did wireless test report, albeit signal quality "Very low", but has always been like that and worked in past.)
> Printing word document - just generates error "Error - printing" and stays stuck in queue.
Anything else that has happened in interim ...
> I have installed LiveDrive in the interim to back up all my files on the cloud - works in the background. Can't imagine it's relevant?
> Any help greatfully received, driving me mad!!
Neil

Hi Rossainz, I don't know that I can answer 'what is wrong with it', but I would be happy to help you figure it out and better yet, resolve the issue. Let's first try leaving the printer on and unplugging the power cable out of the back. Leave it unplugged for a full minute during which time you can hold down the power button for just a few seconds to help release and build up power, then plug the power cable back in. If the issue persists, please let me know and we will see what other solutions might do the trick.

After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF

That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.

thanks...figured out my problem!
Date: Wed, 3 Feb 2010 12:24:29 -0700
From: [email protected]
To: [email protected]
Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
What happens if you try to print to the Adobe PDF printer?
>

Unable to print in Reader X

I am unable to print in Reader X, also it happened in Reader 9 - perhaps with the (clean) install of Snow Leopard from Leopard. I am also using Neo Office (an OpenOffice for Mac). Neither the Print Icon, nor the Print menu work - it does not bring up the dialog at all in X. In 9xx, it would ACT as though it printed, but fail with a "no pages were selected", even though they were. So, today I uninstalled 9xx & installed X fresh. When it didn't print, I reinstalled it. It still doesn't work.
Any help appreciated. (I can print just fine from other apps. ; main printer right now is networked Xerox Phaser 8560)
Log entries:
12/30/10 7:57:34 PM    AdobeReader[2653]    *** WARNING: Method selectRow:byExtendingSelection: in class UIT_NSOutlineView is deprecated. It will be removed in a future release and should no longer be used.
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: _CGSFindSharedWindow: WID -1
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: CGSOrderWindowListWithGroups: invalid window ID (-1)
12/30/10 7:58:19 PM    [0x0-0x49049].com.adobe.Reader[2653]    Thu Dec 30 19:58:19 Macintosh.local AdobeReader[2653] <Error>: kCGErrorIllegalArgument: CGSOrderWindowList: NULL list pointer or empty list
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    :59:06 Acrobat Plug-in load failure: Comments *** ImportReplaceAndRegister returned FALSE
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19:5
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    9:06 Acrobat Plug-in load failure: Multimedia
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]     *** ImportReplaceAndRegis
12/30/10 7:59:06 PM    [0x0-0x49049].com.adobe.Reader[2653]    ter returned FALSE
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]    2010 12 30 19:59:
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]    07 Acrobat Plug-in load failure: Updater *** ImportReplaceAndRegister returned
12/30/10 7:59:07 PM    [0x0-0x49049].com.adobe.Reader[2653]     FALSE
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.1-Patch-2-Intel.pkg
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.2-Patch-1-Intel.pkg
12/30/10 8:00:04 PM    Installer[2719]    PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-3.1.2-Patch-2-Intel.pkg
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    2010 12 30 20:01:53 Acro
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    bat Plug-in load failure: Comments *** ImportReplaceAndRegister returned FALSE
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    2010 12 30 20:01:5
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    3 Acrobat Plug-in load failure: Updater *** Imp
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    ortReplaceAndRegister retu
12/30/10 8:01:53 PM    [0x0-0x59059].com.adobe.Reader[4400]    rned FALSE

For the record, Mac 10.6.5.
PDFs are the problem, I also see no link for a "possible" solution. Every other application can print, including Firefox, Neo (OpenOffice for Mac), Preview, etc.
My workaround has been to close Acrobat Reader, then open the PDF in Preview and print from there.

.error Print indicator 029 not defined. Message no. L3118.

error Print indicator 029 not defined. Message no. L3118
Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help.

Hello,
I am getting the same issue.
Please let me know the solution.

My 7200 says "error printing" in our new comp with 7. i did download 2 x the 7 downloads.

I can't get our HP7200 to print. I did the new windows 7s downloads but all I get in the printer box is the job title and "error-printing." Test page is the same. All ink is good. In fact, the printer worked fine last week but not with our new Dell laptop.

Did you try updating iTunes to 11.1?

Error Printing using flash paper

I have flashpaper 2.0 installed onto a windows XP Pro SP2, a
particular user is not able to use the flash paper printer. He just
gets Windows XP Printer Error box with 'Error printing - An unknown
error occured'.
There is an entry in the printer's queue, it too is marked
with 'Error - printing'.
When i log in (i'm an admin user) it works fine.
Any clues on where to look?

I have the same problem. Installed Studio 8 with Contribute 3
and FPV2 on WIN XP PRO SP2. I can't print to FlashPaper; I just get
the "Error-Printing" in the print queue. I have admin privledges
but still have the problem. I have uninstalled and reinstalled
Contribute twice. I have downloaded FPV2 drivers. I have tried
adding FPV2 drivers through WIN XP 'Add Printer" process and always
the same thing.

RH7 Error: Failed to read from log... Failed to generate WebHelp Pro

Installed RH9 trial on Windows XP PC. Then, generated an existing project using RH7 to a new C: drive directory location on the PC using the same name. Renamed the project files in that C:drive directory to a test name and opened the project's .xpj file in RH9. It converted cleanly.
Now, when I go to generate the RH7 original project from the original server directory, I receive:
Error: Failed to read from log (file name) .log.... Internal error encountered, Failed to generate WebHelp Pro.
Does the log file keep track of the previous generation (time stamp,etc), since this RH7 generation has a skip in it for the one generated to the C:drive? I've compared the log files from each run (.txt files) and don't see a difference. I even copied the log file from the C:drive run to the Server directory. No luck. Any ideas?

Hi John,
Thanks for the prompt response. I am trying to evaluate RH9 / RH Server 9.
When I generate RH7 projects, I’ve always put the server (RH7 Server) directory reference in the ‘Output Folder and Start Page’ field. This directory reference is where the compiled output ends up right? In my case, it’s in that field as:
PBSrobohelp\D$\RoboHelp <file:///
PBSrobohelp\D$\RoboHelp> Web Files\PBS Unit Processes Manual. I’m not aware of a C:Drive local copy of the files. Doesn’t it go out to the server output for the .log file in question?
For the test, I took an existing project in RH7 and replaced this server reference with a C:Drive local hard drive directory reference and ran the output to it. Then I went to the C:Drive directory and changed the project name, because there doesn’t appear to be a way to do a ‘save as’ on a project – RH7 wants to keep that name badly. I then, shutdown RH7 and started RH9. I opened the .xpj file from the new test project copy. It recognized that it was from an older release and it converted the test copy to RH9. It converted cleanly with about 2 inconsequential document warnings but did not create a TOC. I looked it over and saved it in RH9 – it was already my test name.
The original RH7 project opens fine in RH7 and the Test RH9 project opens fine in RH9. So I think I have a good test copy. It’s just that when I point the RH7 original to the Server Output folder (which has its files) it gets the error on generation.
We are evaluating RH Server 9 but I haven’t attempted to publish anything to it yet. I’ve stayed purely on my desktop.
Hope this clears it up.
Jim
Jim Dages
Business Professional Technician III
University of Colorado, Payroll & Benefit Services
1800 Grant St, Suite 400
Denver, CO 80203
t. 303-860-4230
f. 303-860-4299
   Please consider the environment before printing this e-mail.
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner. Thank you.

Network Printer (Error - Printing) Will Not Print

Hi,
We currently use a HP DesignJet 1055CM printer for all of our AutoCAD and plan drawings, which has recently gone on the fritz. Any print job sent from anyone in our network will make its way to the printing queue and be met with a Error - Printing status. Additionally, even after all the documents are cancelled, a test page will consistently queue itself and post yet another error. When the test page is cleared and the queue is completely empty, and print jobs sent will also be met with the same message. This all recently happened when a co-worker added said printer to his (relatively) new computer. He downloaded a the driver for the printer off the internet, and now no one can print. I suspect that his driver was simply incompatible with the working one and now has caused this problem. He was using Windows Pro. XP SP3 and downloaded the driver from http://designjet1055cmplus.com/drivers.htm. Can someone confirm this diagnosis or point me in the right direction? If it is a compatiblity issue, how can we revert back to the working one? There is a computer not currently hooked up to the network that had the driver on it that worked, but I did not want to overwrite anything until I got some advice. I may not even be in the right ballpark of thinking.
Thanks for your time and let me know if there is any additional information I need to provide or if I am outside the protocol of this forum.

Hi haslet,
Have you tried checking to see if the cartridge is vented properly? Sometimes if the vent is clogged it can affect the print quality. See the link below for more details...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01821078&cc=us&lc=en&dlc=en&product=3794621&tmp...
Please let me know if this helps.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Error printing both wireless and via USB

Hi my printer is a HP deskjet 3050A all in one.
It stopped communicating with the computers in the house when we were having internet issues.Tthe modem was reset.
I have unistalled it and reinstalled the printer and the drivers and I can send the documents to the correct printer from both the desktop and the laptop, but then I am getting an error printing message. when I click on to see what's printing, the document is listed in the queue but it is showing a document with three circles on it rather than a Word Document.
This is happening from both computers and with both connected and wireless printing.
Any suggestions?
Thank you
This question was solved.
View Solution.

Hey @soleruler,
If the printer doesn't show under the Programs and Features list on your Windows 8.1 systems than that generally indicates that your Deskjet 3050a e-All-in-One Printer was most likely not installed properly in the first place. You certainly can use the 'Remove Device' option under 'Devices and Printers' on those 3 computers to remove the old copies of the printer. Just make sure that there is no print jobs stuck in the queue when you go to remove the device. Print jobs stuck in the queue will cause the printer to go into a 'removing' status but the Deskjet wont delete until the jobs are deleted. To check the print queue just right click on the printer under Devices and Printers and left click on 'See What's Printing'. If anything is in the box then just right click on it and 'cancel' the jobs. Once cancelled, then you can proceed with the 'Remove Device' option.
Let me know how these steps go for you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Error printing in Reader X

Similar Messages

Maybe you are looking for