Error printing multiple pages and incomplete pages if minimise document

I have had this issue before but can't remember how I resolved it. When I print from my Lenovo desktop the printer fails to print multiple pages at a time and also if I close or minimise a document I am printing then the printer will stop mid page.

Hello @Lindseyjc81 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues printing multiple pages. I would like to help!
Do you have any issues making a copy?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

Hi KnoopL,
Are the Mac users using Preview to view the pdfs or Adobe Reader?
Regards,
Rave

How do I print multiple copies of a page in a PDF File?

How do I print multiple copies of a page in a PDF File? For some reason I tell it to print, for example, 3 or 4 copies of a certain page and it will only print one copy!!!

OS X 10.9.5Adobe Reader 11.0.10
I increase the number of copies to 3, 4, or 5 (etc.) but it would still only print one copy of the designated page/pages.
From: pwillener <[email protected]>
To: Caren Harris <[email protected]>
Sent: Friday, March 6, 2015 9:17 PM
Subject: How do I print multiple copies of a page in a PDF File?
How do I print multiple copies of a page in a PDF File?
created by pwillener in Adobe Reader - View the full discussionOperating system? Reader version? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7262032#7262032 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7262032#7262032 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Printing multiple photos onto one page

Sorry, fairly new to PSE9!
Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame. They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size? A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see! I'm sure I must be missing something here!
Any help much appreciated! Don't want to waste photo paper printing each small photo individually!

http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
Post #6 in this thread provides standard directions.

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

HT204135 I recently migrated from a 2 year old MacBook Pro to MacBook Pro Retina and now cannot get my LaserJet 3200 to print. I downloaded drivers from HP Support site but printer just prints a line of gibberish per page, and many pages.

I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?

Hi
where can I find the "generic PCL driver" you referred to Greg?
Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
Find by product
Go
How do I find my product name / number?
5 matches found. Please select one below
HP LaserJet 2100 Printer series
HP LaserJet 2100 Printer
HP LaserJet 2100m Printer
HP LaserJet 2100se Printer
HP LaserJet 2100tn Printer
HP LaserJet 2100xi Printer

Problem regarding printing in first and last page of a form

I need to print a some text only in the first page and last page. I have defined a window to print this text. The number of pages that will be created is decided on run time. Can some body please help regarding this issue. I have tried to use SFSY-FORMPAGES to calculate total number of pages in the begining but it does not work
Edited by: subhajit bhadra on Feb 20, 2009 7:44 AM

Hi Badhra,
You can use conditions for that window or text element.
in conditions, tick 'only befor main window' forr header
and 'ONly after main window ' for footer.
Sunil

I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

I keep getting this error message and the spinning wheel on all websites, any fix? (Webpages are not responding, so loading cannot be stopped. Do you want to force reload this page and all pages in other tabs and windows?)

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

How to print multiple photos on one page

How do I print multiple photos onone page

Create a new blank document the size of your paper and then copy the photos you want to print into it. They'll each come in on a new layer and you can move them wherever you want, rotating if wanted, to make best use of the paper.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How do I print multiple PDFs AND fit them to my paper size?

Hi,
I'm using a 24 inch wide plotter with roll paper. I want to be able to print multiple PDFs AND fit them to a specified paper size. I can print one page and fit it to the paper, but I can't do it with multiple PDFs.
For example, I have two PDFs that are only 8x8 inches. I want to print them side by side on a 24 inch x 12 inch page size and fit them to size and then FIT them to the page size so the end result will be 2 PDFs printing at 12 x 12 side by side.
I can't seem to be able to do this. I'm sure I was able to do this using earlier versions. As it is, I have to print one at a time and waste half of my roll paper size.
Any help?
Adobe Acrobat Pro, Windows 7 Proffesional, HP Designjet 111 roll fed plotter.
Thanks

Note this illustration is Based on Mac version of HP Print Driver standard inkjet. However Control should be smilar Layouts and titles may be different:
Adjust items shown according to pages desired

Previous Page and Next Page functions lost

The Previous Page and Next Page icons suddenly vanished with only the Reload Page and Add Bookmark icons showing. The only way I am able to return to a previous page is through History. Will I have to reintall Safari? and, if so, can I just install Safari without jeopardizing my data not only in Safari but other applications? I have original OS X 10.2 and 10.3 discs. Can I reintall over the existing Safari app?
Thanks much.
TeddyZ
G4 Mac OS X (10.4.3)

Sorry, but this didn't work at all. I think Safari has been corrupted and think I'll have to reinstall.
Do I deinstall? or can I reinstall over the existing Safari? And can I isolate Safari with my existing OS discs (I have both OS 10.2 and 10.3.5)?
I have an external hard drive. Could that be helpful in this process?
(I suspect that all my bookmarks will be lost, but can compensate by printing them out in hard copy).
G4 Mac OS X (10.4.3)

Different Footer on First page and last pages

Hi
I am trying to display Continue on first page and middle pages and Total Amount on last page on a multipage PO. I can display different footer page for first page and last page but the middle pages don't have a footer. How to do this if possible. There are so many threads here but not one gives the exact steps.
first page header footer
Add Page Break
2nd page header footer
Add Section Break => Next Page
<?start@last-page-first:body?><?end body?>
last page footer
Please help
Thanks

Did you miss this ?
http://winrichman.blogspot.com/search/label/different%20page%20header
http://winrichman.blogspot.com/search/label/element%20in%20header
http://winrichman.blogspot.com/search/label/diff%20header

Pages and Navigation Pages

What's the difference between Pages and Navigation Pages? Can I change a Page to Navigation Page? If yes, how?
Thanks a lot.

The basic problem is that the default page only applies when you haven't yet accessed the book. Once you have accessed it , the last accessed page within the book is what gets displayed. (if the page label specified is the books).
as before, you either must implement your logic in a backing file or you must generate the url to the book correctly (by having the page label of the page you want active) i.e. if your book has a pagelabel b1 and your pages have labels p1 and p2 and you always want b1 to goto p2 (the default) , then whenever you want to generate a URL to the book you must use P2 as the label (whether it is custom menu or anywhere else in your site).
The reason the first option is preferable because the logic lives with your book's backing file, in the second case it is spread out (even if you use a helper)
regards
deepak

Error printing multiple pages and incomplete pages if minimise document

Similar Messages

Maybe you are looking for