Error printing with CUPS (SOLVED)

Could some kind CUPS guru help me with a problem printing through CUPS?
I have a postscript file which rendesr normally in all the software I have (okular etc) but for some reason does not print.
The CUPS log shows:
D [18/Dec/2012:08:27:57 +0000] [Job 167] Auto-typing file...
D [18/Dec/2012:08:27:57 +0000] [Job 167] Request file type is application/postscript.
D [18/Dec/2012:08:27:57 +0000] cupsdMarkDirty(---J-)
D [18/Dec/2012:08:27:57 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [18/Dec/2012:08:27:57 +0000] [Job 167] File of type application/postscript queued by "andrew".
I [18/Dec/2012:08:27:57 +0000] [Job 167] Adding end banner page "none".
D [18/Dec/2012:08:27:57 +0000] cupsdMarkDirty(---J-)
D [18/Dec/2012:08:27:57 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2012:08:27:57 +0000] [Job 167] time-at-processing=1355819277
D [18/Dec/2012:08:27:57 +0000] cupsdMarkDirty(---J-)
D [18/Dec/2012:08:27:57 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2012:08:27:57 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2012:08:27:57 +0000] cupsdMarkDirty(----S)
D [18/Dec/2012:08:27:57 +0000] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2012:08:27:57 +0000] [Job 167] job-sheets=none,none
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[0]="Fprint"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[1]="167"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[2]="andrew"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[3]="notes.ps"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[4]="1"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[5]="nocollate Duplex=None InputSlot=Default number-up=1 outputorder=normal PageSize=A4 position=center Resolution=600x600dpi nowrap job-uuid=urn:uuid:08c52a0f-73f7-3ac7-7632-7ee1e4465007 job-originating-host-name=localhost time-at-creation=1355
819277 time-at-processing=1355819277"
D [18/Dec/2012:08:27:57 +0000] [Job 167] argv[6]="/var/spool/cups/d00167-001"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[8]="HOME=/var/spool/cups/tmp"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[10]="SERVER_ADMIN=root@hp-dm1"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[11]="SOFTWARE=CUPS/1.6.1"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[13]="USER=root"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[14]="CUPS_MAX_MESSAGE=2047"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[17]="IPP_PORT=631"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[18]="CHARSET=utf-8"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[19]="LANG=en.UTF-8"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[20]="PPD=/etc/cups/ppd/Fprint.ppd"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[21]="RIP_MAX_CACHE=128m"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[22]="CONTENT_TYPE=application/postscript"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[23]="DEVICE_URI=fprint://home/andrew/.fprint"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[24]="PRINTER_INFO=Print to Fprint"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[25]="PRINTER_LOCATION=hp-dm1"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[26]="PRINTER=Fprint"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[27]="PRINTER_STATE_REASONS=none"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[28]="CUPS_FILETYPE=document"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[29]="FINAL_CONTENT_TYPE=printer/Fprint"
D [18/Dec/2012:08:27:57 +0000] [Job 167] envp[30]="AUTH_I****"
I [18/Dec/2012:08:27:57 +0000] [Job 167] Started filter /usr/lib/cups/filter/pstopdf (PID 7895)
I [18/Dec/2012:08:27:57 +0000] [Job 167] Started filter /usr/lib/cups/filter/pdftopdf (PID 7896)
I [18/Dec/2012:08:27:57 +0000] [Job 167] Started filter /usr/lib/cups/filter/foomatic-rip (PID 7897)
I [18/Dec/2012:08:27:57 +0000] [Job 167] Started backend /usr/lib/cups/backend/fprint (PID 7898)
So it seems to be identifying the files correctly as postscript, and then tries to conver it to a pdf using its pstopdf filter, then proceeds to run pdftopdf for some reason, filter it through foomatic-rip and then through the fprint filter (mine).
I have no idea why it needs to go through all those filters first, however it fails early,at the pstopdf step:
pstopdf 6 args: 167 andrew notes.ps 1 nocollate Duplex=None InputSlot=Default number-up=1 outputorder=normal PageSize=A4 position=center Resolution=600x600dpi nowrap job-uuid=urn:uuid:08c52a0f-73f7-3ac7-7632-7ee1e4465007 job-originating-host-name=localhost time-at-creation=1355819277 time-at-processing=1355819277 /var/spool/cups/d00167-001
PID 7895 (/usr/lib/cups/filter/pstopdf) stopped with status 1.
I looked at /var/spool/cups/d00167-001 and it is a faithful copy of the postscript file, but running the command from the command line produces:
# /usr/lib/cups/filter/pstopdf 167 andrew notes.ps 1 nocollate Duplex=None InputSlot=Default number-up=1 outputorder=normal PageSize=A4 position=center Resolution=600x600dpi nowrap job-uuid=urn:uuid:08c52a0f-73f7-3ac7-7632-7ee1e4465007 job-originating-host-name=localhost time-at-creation=1355819277 time-at-processing=1355819277 /var/spool/cups/d00167-001
DEBUG: pstopdf 18 args: 167 andrew notes.ps 1 nocollate Duplex=None InputSlot=Default number-up=1 outputorder=normal PageSize=A4 position=center Resolution=600x600dpi nowrap job-uuid=urn:uuid:08c52a0f-73f7-3ac7-7632-7ee1e4465007 job-originating-host-name=localhost time-at-creation=1355819277 time-at-processing=1355819277 /var/spool/cups/d00167-001
DEBUG: PPD:
ERROR: /usr/lib/cups/filter/pstopdf job-id user title copies options [file]
Running the command without the options produces a PDF file on stdout.
The questions seem to be, why does CUPS try to convert a Postscript file to a PDF and then back to Postscript via foomatic-rip, and why does that conversion fail for me?
Incidentally I am using one of the Generic Postscript PPD files
Thanks for any guidance
Andrew
Last edited by fdservices (2012-12-19 12:14:09)

Turns out this whole thing was nothing to do with CUPS, but resulted from my root partition filling up.
Embarrasing or what?
Sorry
Andrew

Similar Messages

  • Error printing with Windows 7 even after unistallin​g old and installing new driver

    I recently updated to 64-bit Windows 7 and cannot get my HP OfficeJetJ4580 working after the upgrade.  I uninstalled all prior printer drivers and ran the recommended software from the HP site to ensure there were no remaining drivers on my system, then installed the updated drivers for use with WIndows 7.  The driver isntallation said it was successfula dn that my printer was ready for use.
    When I try to print, the job is sent to the print que.  The print que immedialtely notes "Error printing" and deletes the job from the que.  The printer never responds or tries to print.  This happens with anything I try to print, including a test page.  No error message is dispalyed on my screen.  The only way I can see the error is by opening up the print que and looking at the pending jobs.  I went to the HP support center and downloaded and ran the printer diagnostic sofware they had on there.  It could not detect any problems with the printer. 
    I am at a complete loss as to what to try next.

    Hello PPN, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into installation issues.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I'd recommend putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    After the computer has been put in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • 306 Error Printing with Time Capsule 2TB

    I just upgraded from a 1st Generation Time Capsule (500GB) to a 4th Generation Time Capsule (2TB).  I have a Canon MP600 printer connected via USB to the Time Capsule.  In my previous setup, this worked flawlessly and other computers on the network could print to this device.  With the new setup, I'm receiving a 306 Error printing to the printer via the new Time Capsule. 
    I have:
    Reset the printer system information.
    Rest the TC to default settings, attached the USB for the printer, and restarted the device.
    Tested the USB direct connection to my printer (works fine).
    I feel like this has to be related to the new TC...wondering if I've got a setting mixed up.
    Any help would be great - I've reviewed most of the postings related to this subject, but this one feels different as it involves an upgrade to new TC and I'm not trying to use a wireless printer. 
    Bryant

    First, restart your MacBook Pro and your Time Capsule. This solves the problem in most of the cases.
    If it doesn't work, see > http://pondini.org/TM/C12.html

  • Trouble setting up a Brother HL-2030 laser printer with CUPS

    Hi,
    I have a Brother HL-2030 laser printer that I've already setup successfully at work, on various distributions: CentOS, Debian and Slackware. I also have this printer at home, so I tried to set it up on my brandnew Arch install. I have a base system with X11 and XFCE desktop environment. To setup CUPS on Arch, I've followed the according CUPS Wiki entries on archlinux.org and archlinux.de.
    Here's the packages I installed to have CUPS:
    - cups
    - ghostscript
    - a2ps
    - gutenprint
    - foomatic-db
    - foomatic-db-engine
    - foomatic-db-ppd
    - foomatic-filters
    I edited /etc/cups/cupsd.conf, and here's what I changed to the default configuration:
    # Only listen for connections from the local machine.
    Listen localhost:631
    Listen 192.168.1.2
    # Restrict access to the server...
    # By default only localhost connections are possible
    <Location />
    Order allow,deny
    Allow localhost
    Allow 192.168.1.*
    </Location>
    # Restrict access to the admin pages...
    <Location /admin>
    # Encryption disabled by default
    #Encryption Required
    Order allow,deny
    Allow localhost
    Allow 192.168.1.*
    </Location>
    I started the CUPS daemon, connected to the web interface at http://localhost:631 and setup my printer with the Gutenprint drivers for HL-2060 (as recommended). Then I defined the printer as default.
    Here's the output of lpstat -t in a Terminal, which shows the printer OK:
    [root@archtest2:/etc/cups] # lpstat -t
    l'ordonnanceur tourne
    destination par défaut du système : BrotherHL2030
    périphérique pour BrotherHL2030 : usb://Brother/HL-2030%20series
    BrotherHL2030 accepte les requêtes depuis le ven 11 avr 2008 08:04:04 CEST
    But when I try to print the CUPS test page, I get... nothing. The printer shortly begins to hum, but doesn't print.
    Next step, I set the LogLevel in cupsd.conf to being more verbose. Here's the output of /var/log/cups/error_log when I try in vain to print a test page:
    d [11/Apr/2008:08:20:34 +0200] get_file: 12 filename=/usr/share/cups/doc/fr/images/button-move-job.gif size=610
    d [11/Apr/2008:08:20:34 +0200] is_cgi(con=0x81195a0, filename="/usr/share/cups/doc/fr/images/button-move-job.gif", filestats=0xbf94ac98, type=image/gif)
    d [11/Apr/2008:08:20:34 +0200] is_cgi: Returning 0...
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 12 If-Modified-Since="Thu, 03 Apr 2008 17:48:13 GMT"
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 12 sizes=0,610 dates=1207244893,1207244893
    D [11/Apr/2008:08:20:34 +0200] cupsdSendError: 12 code=304 (Not Modified)
    d [11/Apr/2008:08:20:34 +0200] cupsdDoSelect: Read on fd 8...
    d [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 8, used=0, file=-1 state=0
    D [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 8 GET /images/bottom-left.gif HTTP/1.1
    d [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 8 Browser asked for language "fr.utf-8"...
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: uri = "/images/bottom-left.gif"...
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location /admin/conf Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location /admin Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location / Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: best = /
    d [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: con->uri="/images/bottom-left.gif", con->best=0x80ae560(/)
    d [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: Authorization="Basic cm9vdDpDYmliY2QxZG8="
    D [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: Authorized as root using Basic
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: con->uri="/images/bottom-left.gif", con->best=0x80ae560(/)
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: level=CUPSD_AUTH_ANON, type=None, satisfy=CUPSD_AUTH_SATISFY_ALL, num_names=0
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: auth=CUPSD_AUTH_ALLOW...
    d [11/Apr/2008:08:20:34 +0200] get_file: 8 filename=/usr/share/cups/doc/images/bottom-left.gif size=122
    d [11/Apr/2008:08:20:34 +0200] is_cgi(con=0x80f5fc0, filename="/usr/share/cups/doc/images/bottom-left.gif", filestats=0xbf94ac98, type=image/gif)
    d [11/Apr/2008:08:20:34 +0200] is_cgi: Returning 0...
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 8 If-Modified-Since="Thu, 03 Apr 2008 17:48:14 GMT"
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 8 sizes=0,122 dates=1207244894,1207244894
    D [11/Apr/2008:08:20:34 +0200] cupsdSendError: 8 code=304 (Not Modified)
    d [11/Apr/2008:08:20:34 +0200] cupsdDoSelect: Read on fd 13...
    d [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 13, used=0, file=-1 state=0
    D [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 13 GET /images/bottom-right.gif HTTP/1.1
    d [11/Apr/2008:08:20:34 +0200] cupsdReadClient: 13 Browser asked for language "fr.utf-8"...
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: uri = "/images/bottom-right.gif"...
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location /admin/conf Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location /admin Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: Location / Limit 7f
    d [11/Apr/2008:08:20:34 +0200] cupsdFindBest: best = /
    d [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: con->uri="/images/bottom-right.gif", con->best=0x80ae560(/)
    d [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: Authorization="Basic cm9vdDpDYmliY2QxZG8="
    D [11/Apr/2008:08:20:34 +0200] cupsdAuthorize: Authorized as root using Basic
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: con->uri="/images/bottom-right.gif", con->best=0x80ae560(/)
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: level=CUPSD_AUTH_ANON, type=None, satisfy=CUPSD_AUTH_SATISFY_ALL, num_names=0
    d [11/Apr/2008:08:20:34 +0200] cupsdIsAuthorized: auth=CUPSD_AUTH_ALLOW...
    d [11/Apr/2008:08:20:34 +0200] get_file: 13 filename=/usr/share/cups/doc/images/bottom-right.gif size=123
    d [11/Apr/2008:08:20:34 +0200] is_cgi(con=0x811cd10, filename="/usr/share/cups/doc/images/bottom-right.gif", filestats=0xbf94ac98, type=image/gif)
    d [11/Apr/2008:08:20:34 +0200] is_cgi: Returning 0...
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 13 If-Modified-Since="Thu, 03 Apr 2008 17:48:14 GMT"
    d [11/Apr/2008:08:20:34 +0200] check_if_modified: 13 sizes=0,123 dates=1207244894,1207244894
    D [11/Apr/2008:08:20:34 +0200] cupsdSendError: 13 code=304 (Not Modified)
    d [11/Apr/2008:08:20:34 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Wrote 8192 bytes of print data...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Read 8192 bytes of print data...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Wrote 8192 bytes of print data...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Read 8192 bytes of print data...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Wrote 8192 bytes of print data...
    D [11/Apr/2008:08:20:35 +0200] [Job 8] Read 8192 bytes of print data...
    d [11/Apr/2008:08:20:35 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:36 +0200] [Job 8] Wrote 8192 bytes of print data...
    D [11/Apr/2008:08:20:36 +0200] [Job 8] Read 4249 bytes of print data...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:36 +0200] [Job 8] Wrote 4249 bytes of print data...
    d [11/Apr/2008:08:20:36 +0200] process_children()
    D [11/Apr/2008:08:20:36 +0200] PID 5954 (/usr/lib/cups/backend/usb) exited with no errors.
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: polling 11 fds for 1 seconds...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: epoll() returned 1...
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: Read on fd 17...
    D [11/Apr/2008:08:20:36 +0200] [Job 8] File 0 is complete.
    d [11/Apr/2008:08:20:36 +0200] [Job 8] cupsdFinishJob: job->status is 0
    d [11/Apr/2008:08:20:36 +0200] cupsdRemoveSelect: fd=17
    d [11/Apr/2008:08:20:36 +0200] [Job 8] cupsdFinishJob: Closing status pipes [ 17 -1 ]...
    I [11/Apr/2008:08:20:36 +0200] [Job 8] Completed successfully.
    d [11/Apr/2008:08:20:36 +0200] cupsdCancelJob: id = 8
    d [11/Apr/2008:08:20:36 +0200] [Job 8] cupsdStopJob: force = 0
    d [11/Apr/2008:08:20:36 +0200] cupsdAddEvent(event=printer-state-changed, dest=0x80c8840(BrotherHL2030), job=(nil)(0), text="%s "%s" state changed.", ...)
    D [11/Apr/2008:08:20:36 +0200] Discarding unused printer-state-changed event...
    d [11/Apr/2008:08:20:36 +0200] [Job 8] Closing print pipes [ -1 -1 ]...
    d [11/Apr/2008:08:20:36 +0200] [Job 8] Closing back pipes [ -1 -1 ]...
    d [11/Apr/2008:08:20:36 +0200] [Job 8] Closing side pipes [ -1 -1 ]...
    d [11/Apr/2008:08:20:36 +0200] cupsdAddEvent(event=job-completed, dest=0x80c8840(BrotherHL2030), job=0x80fd060(8), text="Job completed.", ...)
    D [11/Apr/2008:08:20:36 +0200] Discarding unused job-completed event...
    d [11/Apr/2008:08:20:36 +0200] cupsdSaveJob(job=0x80fd060(8)): job->attrs=0x80fcd60
    d [11/Apr/2008:08:20:36 +0200] cupsdCheckJobs: 0 active jobs, sleeping=0, reload=0
    d [11/Apr/2008:08:20:36 +0200] cupsdDoSelect: polling 10 fds for 1 seconds...
    d [11/Apr/2008:08:20:37 +0200] cupsdDoSelect: epoll() returned 0...
    D [11/Apr/2008:08:20:37 +0200] [Job 8] Unloading...
    d [11/Apr/2008:08:20:37 +0200] select_timeout(0): 298 seconds to timeout a client connection
    d [11/Apr/2008:08:20:37 +0200] cupsdDoSelect: polling 10 fds for 298 seconds...
    [root@archtest2:/etc/cups] #
    Which leaves me clueless...
    Any suggestions?

    my brother hl-1430 shows similar symptoms. should i install the brother drivers for this model too? it worked a few weeks ago... but cups tend to break stuff... constantly. i had this printer working for years, then it wouldn't work for about a year (on gentoo), then i switched to arch where it worked with kde and now it stopped working again. i'm really wondering what those guys are doing over there.
    D [27/May/2008:18:42:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:02 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:02 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:02 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:02 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:02 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:02 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:02 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:02 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:07 +0200] Report: clients=1
    D [27/May/2008:18:42:07 +0200] Report: jobs=58
    D [27/May/2008:18:42:07 +0200] Report: jobs-active=1
    D [27/May/2008:18:42:07 +0200] Report: printers=1
    D [27/May/2008:18:42:07 +0200] Report: printers-implicit=0
    D [27/May/2008:18:42:07 +0200] Report: stringpool-string-count=524
    D [27/May/2008:18:42:07 +0200] Report: stringpool-alloc-bytes=7744
    D [27/May/2008:18:42:07 +0200] Report: stringpool-total-bytes=9544
    D [27/May/2008:18:42:07 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:07 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:07 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:07 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:07 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:07 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:07 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:07 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:12 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:12 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:12 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:12 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:12 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:12 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:12 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:12 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:12 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:12 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:12 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:12 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:12 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:12 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:12 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:12 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:12 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:12 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:12 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:12 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:12 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:12 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:12 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:12 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:17 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:17 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:17 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:17 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:17 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:17 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:17 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:17 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:17 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:17 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:17 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:17 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:17 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:17 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:17 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:17 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:17 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:17 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:17 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:17 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:17 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:17 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:17 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:17 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:22 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:22 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:22 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:22 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:22 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:22 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:22 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:22 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:22 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:22 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:22 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:22 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:22 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:22 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:22 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:22 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:22 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:22 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:22 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:22 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:22 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:22 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:22 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:22 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:27 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:27 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:27 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:27 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:27 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:27 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:27 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:27 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:27 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:27 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:27 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:27 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:27 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:27 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:27 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:27 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:27 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:27 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:27 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:27 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:27 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:27 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:27 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:27 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:32 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:32 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:32 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:32 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:32 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:32 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:32 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:32 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:32 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:32 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:32 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:32 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:32 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:32 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:32 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:32 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:32 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:32 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:32 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:32 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:32 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:32 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:32 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:32 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:37 +0200] cupsdNetIFUpdate: "lo" = localhost...
    D [27/May/2008:18:42:37 +0200] cupsdNetIFUpdate: "eth0" = 192.168.1.2...
    D [27/May/2008:18:42:37 +0200] cupsdNetIFUpdate: "lo" = localhost...
    D [27/May/2008:18:42:37 +0200] cupsdNetIFUpdate: "eth0" = fe80::21d:7dff:fe9d:62e6%eth0...
    D [27/May/2008:18:42:37 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:37 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:37 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:37 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:37 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:37 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:37 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:37 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:37 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:37 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:37 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:37 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:37 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:37 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:37 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:37 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:37 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:37 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:37 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:37 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:37 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:37 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:37 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:37 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:42 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:42 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:42 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:42 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:42 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:42 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:42 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:42 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:42 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:42 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:42 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:42 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:42 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:42 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:42 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:42 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:42 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:42 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:42 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:42 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:42 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:47 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:47 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:47 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:47 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:47 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:47 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:47 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:47 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:47 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:47 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:47 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:47 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:47 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:47 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:47 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:47 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:47 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:47 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:47 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:47 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:47 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:47 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:47 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:47 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:52 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:52 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:52 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:52 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:52 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:52 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:52 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:52 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:52 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:52 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:52 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:52 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:52 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:52 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:52 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:52 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:52 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:52 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:52 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:52 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:52 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:52 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:52 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:52 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:57 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:57 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:57 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:57 +0200] CUPS-Get-Printers
    D [27/May/2008:18:42:57 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:57 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:57 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:57 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:42:57 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:57 +0200] CUPS-Get-Classes
    D [27/May/2008:18:42:57 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:57 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:57 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:57 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:42:57 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:57 +0200] CUPS-Get-Default
    D [27/May/2008:18:42:57 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:57 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:42:57 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:42:57 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:42:57 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:42:57 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:42:57 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:42:57 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:02 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:43:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:02 +0200] CUPS-Get-Printers
    D [27/May/2008:18:43:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:02 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:43:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:02 +0200] CUPS-Get-Classes
    D [27/May/2008:18:43:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:02 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:43:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:02 +0200] CUPS-Get-Default
    D [27/May/2008:18:43:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:02 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:02 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:43:02 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:02 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:43:02 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:02 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:07 +0200] Report: clients=1
    D [27/May/2008:18:43:07 +0200] Report: jobs=58
    D [27/May/2008:18:43:07 +0200] Report: jobs-active=1
    D [27/May/2008:18:43:07 +0200] Report: printers=1
    D [27/May/2008:18:43:07 +0200] Report: printers-implicit=0
    D [27/May/2008:18:43:07 +0200] Report: stringpool-string-count=524
    D [27/May/2008:18:43:07 +0200] Report: stringpool-alloc-bytes=7744
    D [27/May/2008:18:43:07 +0200] Report: stringpool-total-bytes=9544
    D [27/May/2008:18:43:07 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:43:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:07 +0200] CUPS-Get-Printers
    D [27/May/2008:18:43:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:07 +0200] cupsdReadClient: 7 POST /classes/ HTTP/1.1
    D [27/May/2008:18:43:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:07 +0200] CUPS-Get-Classes
    D [27/May/2008:18:43:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:07 +0200] cupsdReadClient: 7 POST /printers/ HTTP/1.1
    D [27/May/2008:18:43:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:07 +0200] CUPS-Get-Default
    D [27/May/2008:18:43:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:07 +0200] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [27/May/2008:18:43:07 +0200] cupsdReadClient: 7 POST / HTTP/1.1
    D [27/May/2008:18:43:07 +0200] cupsdAuthorize: No authentication data provided.
    D [27/May/2008:18:43:07 +0200] Get-Jobs ipp://localhost.localdomain:631/printers/brother
    D [27/May/2008:18:43:07 +0200] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok)
    D [27/May/2008:18:43:07 +0200] cupsdCloseClient: 7
    D [27/May/2008:18:43:08 +0200] cupsdNetIFUpdate: "lo" = localhost...
    D [27/May/2008:18:43:08 +0200] cupsdNetIFUpdate: "eth0" = 192.168.1.2...
    D [27/May/2008:18:43:08 +0200] cupsdNetIFUpdate: "lo" = localhost...
    D [27/May/2008:18:43:08 +0200] cupsdNetIFUpdate: "eth0" = fe80::21d:7dff:fe9d:62e6%eth0...

  • Duplex printing with cups

    Hi,
    We have a bunch of Macs all running 10.4.9 (Client) which are unable to print double-sided documents to our printer which is hosted by a redhat enterprise server (v4.4) box, cups version 1.2. The annoying thing is everybody else (windows, linux) can. The printers are set up as A4 paper size, the Macs see that and we see the duplex option in the print dialog box but the printouts come out single-sided with a blank sheet at the end. Another aspect is that when we add a printer using System prefs>Print & Fax etc the cups printer description is displayed as the printer name in the set up dialog on the Mac. Has anybody come across this before and, more importantly, does anybody know how to solve this problem?
    Cheers,
    Matt

    Can you tell us which driver you are using on the Mac's. If it is the included GIMP-Print drivers, try the new Gutenprint 5.0.0 drivers.
    Also, you may want to check the printer info in case you have to add the duplex option. And also try setting the Page Setup > 'Format for' in the application for the printer, rather than any printer, as this can impact duplex printing for some printers.
    Re the printer description being displayed, I know that when you add a network printer the IP address or DNS name is shown as the printers name in the Printer List. You can select it and do a Get Info to rename it.

  • Accessing a pseudo Airprint printer with CUPS

    Hi,
    I'm the owner of an EPL-6200L printer. This printer has an horrible linux driver, so I decide to share it under my wife's PC (Win7 x64). I also got an iPad from which I want to print, so I installed airprint.exe to have Airprint emulation under windows as mentionned here : http://forums.macrumors.com/showthread.php?t=1293865 . Actually, I can print flawlessly from my iPad. My problem is that I'd like to print from my Archlinux box to my printer through this Airprint emulation. I have a fresh CUPS installation (1.5.0), printer is discovered automatically as "EPL-6200L @ Mathilde-HP (Epson Epson EPL-6200L)", I add it (the connection URI is : dnssd://EPL-6200L%20%40%20Mathilde-HP._ipp._tcp.local/ ) and I choose the generic postscript driver. But when I want to print a test page, I got the following error : "processing since Sat 28 Jan 2012 11:16:01 PM RET "no socket to connect to"". I can ping host "mathilde-hp" and "mathilde-hp.local".
    Somebody got an idea why does it fail ?
    Thank you,
    Bruno.

    You need something like this:
    https://itunes.apple.com/us/app/printer-pro-for-iphone/id410011612?mt=8

  • Error printing with Kodak printer dock 6000

    Am having some problems printing to the PRinter Dock 6000 from iphoto. the prints are only 1/4 of what they should be. everything in the print setup and print preview looks like it should print fully onto the 4X6 photo paper. It has the most recent drivers. Using the same print setup options, photos print fine using Photoshop. Anybody help out a bit on this?
    Thanks

    never get the printer to work correctly using iphoto. But Photoshop always works. Kinda wish Apple was as cool as Adobe.

  • Trouble printing with my HP Deskjet printer using CUPS and hplip

    tl;dr This 1,646 word post describes my frustration with CUPS and hplip. I cannot get my HP Deskjet F4400 set up with CUPS, and all the solutions I've tried don't work.
    I'm running Arch Linux ARM on my Seagate DockStar, a small ARM-based "plug computer" that I use as a home server. My printer is the HP Deskjet F4480, which is part of the HP Deskjet F4400 series.
    I previously had CUPS set up to share my printer with my home network, using hplip for the printer driver. I never upgraded CUPS or hplip because those versions worked fine, and I didn't want to break anything avoid breaking anything. The versions that I was using had to have been at least one to two years old.
    Everything was working very smoothly... until a few days ago. The drive I was running Arch Linux ARM on became corrupt, so I had to install a fresh copy of the operating system. That meant losing all of the working versions and configuration files each application I had installed, including CUPS. I thought I had a backup image of the drive, but it didn't work when I tried to restore it. (Yes, it was stupid of me not to test my backup.)
    Setting up CUPS was one of the first things that I wanted to do after reinstalling, since my family depends on the network printing functionality almost daily. Unfortunately, I could not get CUPS to work with my printer correctly. It wouldn't be able to display a list of drivers, HP's setup utility encountered an error adding it, and it threw various errors when I tried to print test pages. I ended up reading hundreds of forum posts, wiki articles, and CUPS/hplip tutorials to try to figure out how to properly set it up. I ended up spending a total of nearly ten hours trying to get the printer to print with CUPS, and it's still not working after all that work.
    I'm going to explain in this post some of the many things that I've tried so far. I just removed all of the printing packages from my system and any extra files that were left behind. I'm now going to be installing all of the packages again and documenting everything that I have been trying to do to get it to work. I'll try to include exact error messages and logs where necessary.
    1. I first found this article on the Arch Linux ARM website on how to set up a CUPS printer. I didn't really want to use webmin, but I did it anyway so that I could follow the guide. I installed all the packages mentioned except for cups-pdf, since I didn't need print to PDF support. Everything installed smoothly, and I configured CUPS and webmin to allow access to other computers on the network. I started to notice problems in the instructions - /etc/rc.d/cups was actually /etc/rc.d/cupsd, /etc/printers.conf was actually /etc/cups/printers.conf, and webmin didn't actually add anything to the printers.conf file. I uninstalled webmin at this point because I didn't need it, and I decided I wasn't going to follow that guide with incorrect information.
    2. I then tried to set up the printer on my own using the CUPS web interface listening on port 631. I clicked the Add Printer button and it switched me to the HTTPS web interface. I then logged into the root account and was presented with the list of printers. My printer was listed as "HP Deskjet F4400 series (HP Deskjet F4400 series)", so I selected it and continued. I saw a list of printer models (PPD files) ending in CUPS+Gutenprint v5.2.9. There was no entry for my printer, so I tried the "HP DeskJet Series (en)" one. I set the default options and chose Maintenaince->Print test page. I then got a ridiculously simple error: "Unable to print test page: No such file or directory". How do I even know what file or directory it's referencing? I read online that it may be because I'm not in the lp group, but root is indeed in there. I saw in the error log "Avahi client failed: -26". I started dbus and avahi-daemon just in case, but I still got that silly error. I restarted cups and the same error message occured.
    3. I researched online that pretty much the only way for my printer to have a driver would be to install hplip. Before installing hplip, I uninstalled CUPS, leaving cupsd.conf but deleting printers.conf. Then I installed CUPS and hplip together, with hplip requiring foomatic-db, foomatic-db-engine, and foomatic-filters. Everything seemed to install correctly. I started CUPS again and then ran hp-setup -i to try to install my printer. I selected USB and it found my printer, hp:/usb/Deskjet_F4400_series?serial=[printer serial number here]. I entered a simple name and then was told that no PPD file was found for the printer but that I could specify one manually. There were none I could find online; everywhere it just said to install hplip. I used the find command to find "f4400" and finally found 2 compressed PPDs located at /usr/share/ppd/HP/hp-deskjet_f4400_series-hpijs.ppd.gz and /usr/share/ppd/HP/hp-deskjet_f4400_series.ppd.gz. I gunzipped both of them and pointed hpsetup to the hpijs one, knowing that I was using the hpijs one when it was working before. It told me "Description for the file: HP Deskjet f4400 Series hpijs, 3.12.6". Hooray! I selected to use it, but then setup failed: "error: Printer queue setup failed. Please restart CUPS and try again." Ugh!
    4. I restarted CUPS and went into the hp-setup process again. It gave me the same printer queue setup failed error. I don't know if these entries in the CUPS error log are related or not, but these errors relating to foomatic showed up. I restarted CUPS again and this time used the non-hpijs file with hp-setup. This one was called "Description for the file: HP Deskjet f4400 Series, hpcups 3.12.6". It failed again with the same error and the same entries in the error log. I found lots of posts online about this error, but none seemed to have a solution that would work for me. Now I tried running hp-setup in debug mode with -g. Here is what it said before the error. I then tried to Google "debug: addPrinter() returned (0, Unable to connect to CUPS server)". I saw on an Arch bug report to install dbus-python and python2-gobject, as well as create a symlink for /usr/bin/python2 to /usr/bin/python. It didn't work - same error.
    5. I then tried to add the printer to CUPS via its web interface. Now there were two listed,  HP Deskjet F4400 series (HP Deskjet F4400 series) and HP Deskjet F4400 series USB [printer serial number here] HPLIP (HP Deskjet F4400 series). So, hplip added the second one. I tried both of them, but after clicking Continue the page started to hang. I got another stupid, undescriptive error. "Unable to get list of printer drivers: Success". I saw the same foomatic errors in the error log as before. I then started reading the ArchWiki page on CUPS, located here. I tried the blacklisting usblp. I tried changing the permissions on the device node, although this starts to become ridiculous that it is even required to do that. Nothing was working; the printer installation still didn't work with hp-setup or with CUPS. Then, I found what I was looking for: the exact error I had on the wiki page! It said for "Unable to get list of printer drivers" you should "Try to remove Foomatic drivers." WTF? Foomatic is required for hplip, and hplip is required for my printer. I can't do that. Forum posts say to try that or do the permissions or usblp thing. Nothing is working.
    6. I tried various other things to get it to work, even though I knew they probably wouldn't make it any different. I copied the PPDs from hplip to another folder and uninstalled hplip and foomatic. I then added them to /usr/share/cups/model and CUPS successfully found them and set up the printer. I reinstalled hplip and foomatic since they're needed for those PPDs to function, and I tried printing a test page. It failed. I tried using the CUPS web interface to modify the printer driver; nope, that wasn't going to happen: "Unable to get list of printer drivers: Success".
    That concludes the list of some of the things that I have tried so far. I really want to get this printer working, but right now I am really fed up with CUPS and hplip. It's things like this that make me hesitant to recommend Linux to anyone else. So much manual configuration and tinkering the inner workings of things is required to do tasks that would be quite simple on Windows. For example, I can plug this printer into my Windows 7 machine right now, wait for the driver to automatically be installed and configured, and have a test page in my hands less than a minute after I first plugged in the USB cable. I can share the printer with any other Windows machine on the network by checking a single checkbox.
    But back to my problem with getting the printer to work on my DockStar. I just uninstalled all of CUPS, hplip, and foomatic again and removed all of their files. I can walk through things to try that you guys post and then give you full logs of everything - just give me exactly what to do and install and the exact order to do it all in. I just don't know what to do at this point and am so frustrated with this that I'm about to give up.
    Does anyone have any suggestions on how to get this printer working? I know this was a very long post, but I just wanted to explain everything that I've tried and how nothing worked. I really hope that we can figure this out so that I'll be able to print, and maybe it'll solve a few other people's problems with their printers, too. Thanks for reading, and thanks in advance for the help.

    Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
    make sure these packages are installed or install them
    pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
    pacman -S system-config-printer-gnome
    rc.d cups start
    To add device and install hp driver:
    1. Run ‘hp-setup’ as root.
    2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
    3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
    run system-config-printer as root, to add printer
    # system-config-printer
    click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
    you should be ok from here, if not some further steps:
    If you encounter the following error:
    File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
    debugprint (host + “: ” + args)
    TypeError: cannot concatenate ‘str’ and ‘list’ objects
    You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
    4). Finally, you can run hp-check to see what problems exists for the printer.

  • [SOLVED] Unable to Print from CUPS - DBus Errors?

    Hi all-
    I'm unable to print on CUPS after doing a recent system upgrade. Not excatly sure what's going on, but below is an output of the error log. Just as a side note- I have two arch machines. The one I'm having problems with has XFCE, my other arch has aweosme and cups works fine. So we can rule out the actual printer as being the problem.
    A few of the errors below are attempts to cancel a test print page job and getting forbidden. Not sure why this would happen other than possibly not logging in as root, but that's not even the main issue. So yea, any help would be appreciated.
    Just one more thing, I've noticed in /etc/cups that one of the config files was renamed to cupsd.conf.pacnew. Anyone know why pacman is over-writting those config files?
    W [27/Mar/2013:12:37:37 -0400] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_EPSON_Stylus_Photo_R220
    E [27/Mar/2013:15:37:31 -0400] Returning HTTP Forbidden for Cancel-Job (ipp://localhost/jobs/44) from localhost
    E [27/Mar/2013:15:39:22 -0400] Returning HTTP Forbidden for CUPS-Add-Modify-Printer (ipp://localhost/printers/EPSON_Stylus_Photo_R220) from localhost
    E [27/Mar/2013:15:40:34 -0400] Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost
    E [27/Mar/2013:15:40:34 -0400] [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
    E [27/Mar/2013:15:41:19 -0400] Returning HTTP Forbidden for Cancel-Job (ipp://localhost/jobs/44) from localhost
    E [27/Mar/2013:15:42:07 -0400] Returning HTTP Forbidden for Purge-Jobs (ipp://localhost/printers/EPSON_Stylus_Photo_R220) from localhost
    E [27/Mar/2013:15:42:31 -0400] Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost
    E [27/Mar/2013:15:42:31 -0400] [CGI] CUPS-Get-Devices request failed with status 401: Forbidden
    Last edited by w201 (2013-03-27 21:57:26)

    Inxsible wrote:
    w201 wrote:Just one more thing, I've noticed in /etc/cups that one of the config files was renamed to cupsd.conf.pacnew. Anyone know why pacman is over-writting those config files?
    In fact, it's not overwriting the config file, which is why you have a pacnew file. You need to read up a bit more on pacman and pacnew and pacsave in general.
    You should merge any and all pacnews with your corresponding config files if pacman tells you that it has created a pacnew file during upgrade. Don't just replace them with newer versions though, because it can lead to bad things like locking you out of the system if you do that for certain files like group or gshadow etc.
    You're completely right, it's not overwriting the files, hence pacnew... bad choice of words.
    ***EDIT***
    Okay....well, I read up on pacnew and pacsave. Thanks for pointing that out, Inxsible. Merging the files solved the problem.
    Thanks again!
    Last edited by w201 (2013-03-27 21:57:00)

  • Cannot print with Brother HL-2140 (CUPS does not complain) [SOLVED]

    I've got a brother HL-2140 which I've installed according to these instructions: http://wiki.archlinux.org/index.php/Brother_HL-2040.  I am using the 2040 driver instead of the 2140 as there are reported issues with the 2140 driver and the 2040 driver is supposed to work anyways. It does in Ubuntu, and according to this Arch user: http://interskh.info/2008/12/install-br … linux.html
    When I go to print a test page, nothing happens and the printer makes no sound whatsoever.
    Cups Error Log:
    I [03/Jan/2009:13:25:16 -0800] Scheduler shutting down normally.
    D [03/Jan/2009:13:25:16 -0800] Discarding unused server-stopped event...
    D [03/Jan/2009:13:25:16 -0800] cupsdCloseClient: 6
    D [03/Jan/2009:13:25:16 -0800] Saving remote.cache...
    I [03/Jan/2009:13:25:16 -0800] Saving job cache file "/var/cache/cups/job.cache"...
    I [03/Jan/2009:13:25:46 -0800] Listening to 127.0.0.1:631 (IPv4)
    I [03/Jan/2009:13:25:46 -0800] Loaded configuration file "/etc/cups/cupsd.conf"
    I [03/Jan/2009:13:25:46 -0800] Using default TempDir of /var/spool/cups/tmp...
    I [03/Jan/2009:13:25:46 -0800] Configured for up to 100 clients.
    I [03/Jan/2009:13:25:46 -0800] Allowing up to 100 client connections per host.
    I [03/Jan/2009:13:25:46 -0800] Using policy "default" as the default!
    I [03/Jan/2009:13:25:46 -0800] Full reload is required.
    I [03/Jan/2009:13:25:46 -0800] Loaded MIME database from '/etc/cups': 35 types, 39 filters...
    D [03/Jan/2009:13:25:46 -0800] Loading printer HL2040...
    I [03/Jan/2009:13:25:46 -0800] Loading job cache file "/var/cache/cups/job.cache"...
    D [03/Jan/2009:13:25:46 -0800] [Job 16] Loading from cache...
    D [03/Jan/2009:13:25:46 -0800] [Job 17] Loading from cache...
    D [03/Jan/2009:13:25:46 -0800] [Job 18] Loading from cache...
    D [03/Jan/2009:13:25:46 -0800] [Job 19] Loading from cache...
    I [03/Jan/2009:13:25:46 -0800] Full reload complete.
    I [03/Jan/2009:13:25:46 -0800] Cleaning out old temporary files in "/var/spool/cups/tmp"...
    E [03/Jan/2009:13:25:46 -0800] Unable to find IP address for server name "uncle-bilbo"!
    I [03/Jan/2009:13:25:46 -0800] Listening to 127.0.0.1:631 on fd 3...
    I [03/Jan/2009:13:25:46 -0800] Resuming new connection processing...
    E [03/Jan/2009:13:25:46 -0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
    D [03/Jan/2009:13:25:46 -0800] Discarding unused server-started event...
    D [03/Jan/2009:13:25:47 -0800] Report: clients=0
    D [03/Jan/2009:13:25:47 -0800] Report: jobs=4
    D [03/Jan/2009:13:25:47 -0800] Report: jobs-active=0
    D [03/Jan/2009:13:25:47 -0800] Report: printers=1
    D [03/Jan/2009:13:25:47 -0800] Report: printers-implicit=0
    D [03/Jan/2009:13:25:47 -0800] Report: stringpool-string-count=293
    D [03/Jan/2009:13:25:47 -0800] Report: stringpool-alloc-bytes=8304
    D [03/Jan/2009:13:25:47 -0800] Report: stringpool-total-bytes=6008
    D [03/Jan/2009:13:25:52 -0800] cupsdAcceptClient: 7 from localhost:631 (IPv4)
    D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 7 GET /printers HTTP/1.1
    D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: Authorized as root using Basic
    D [03/Jan/2009:13:25:52 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13597
    I [03/Jan/2009:13:25:52 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13597)
    D [03/Jan/2009:13:25:52 -0800] cupsdSendCommand: 7 file=8
    D [03/Jan/2009:13:25:52 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
    D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 10 POST / HTTP/1.1
    D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Default
    D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Default client-error-not-found: No default printer
    D [03/Jan/2009:13:25:52 -0800] cupsdProcessIPPRequest: 10 status_code=406 (client-error-not-found)
    D [03/Jan/2009:13:25:52 -0800] [CGI] show_all_printers(http=0x2409930, user="root")
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 10 POST / HTTP/1.1
    D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Printers
    D [03/Jan/2009:13:25:52 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:52 -0800] cupsdCloseClient: 10
    D [03/Jan/2009:13:25:52 -0800] PID 13597 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
    D [03/Jan/2009:13:25:54 -0800] cupsdReadClient: 7 GET /printers/HL2040?op=print-test-page HTTP/1.1
    D [03/Jan/2009:13:25:54 -0800] cupsdAuthorize: Authorized as root using Basic
    D [03/Jan/2009:13:25:54 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13598
    I [03/Jan/2009:13:25:54 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13598)
    D [03/Jan/2009:13:25:54 -0800] cupsdSendCommand: 7 file=8
    D [03/Jan/2009:13:25:54 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
    D [03/Jan/2009:13:25:54 -0800] cupsdReadClient: 10 POST /printers/HL2040 HTTP/1.1
    D [03/Jan/2009:13:25:54 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:54 -0800] Print-Job ipp://localhost:631/printers/HL2040
    D [03/Jan/2009:13:25:54 -0800] add_job: requesting-user-name="root"
    D [03/Jan/2009:13:25:54 -0800] Adding default job-sheets values "none,none"...
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Adding start banner page "none".
    D [03/Jan/2009:13:25:54 -0800] Discarding unused job-created event...
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Adding end banner page "none".
    I [03/Jan/2009:13:25:54 -0800] [Job 20] File of type application/postscript queued by "root".
    D [03/Jan/2009:13:25:54 -0800] [Job 20] hold_until=0
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Queued on "HL2040" by "root".
    D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
    D [03/Jan/2009:13:25:54 -0800] [Job 20] job-sheets=none,none
    D [03/Jan/2009:13:25:54 -0800] [Job 20] banner_page = 0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[0]="HL2040"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[1]="20"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[2]="root"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[3]="Test Page"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[4]="1"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[5]="job-uuid=urn:uuid:a5b660c0-8a51-311a-57a0-7cfa046475b0"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[6]="/var/spool/cups/d00020-001"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[9]="SERVER_ADMIN=root@uncle-bilbo"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[10]="SOFTWARE=CUPS/1.3.9"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[11]="TMPDIR=/var/spool/cups/tmp"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[12]="USER=root"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[13]="CUPS_SERVER=localhost"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[14]="CUPS_ENCRYPTION=IfRequested"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[15]="IPP_PORT=631"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[16]="CHARSET=utf-8"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[17]="LANG=en_US.UTF8"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[18]="PPD=/etc/cups/ppd/HL2040.ppd"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[19]="RIP_MAX_CACHE=8m"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[20]="CONTENT_TYPE=application/postscript"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[21]="DEVICE_URI=usb://Brother/HL-2140%20series"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[22]="PRINTER=HL2040"
    D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[23]="FINAL_CONTENT_TYPE=printer/HL2040"
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Started filter /usr/lib/cups/filter/pstops (PID 13599)
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Started filter /usr/lib/cups/filter/brlpdwrapperHL2040 (PID 13600)
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Started backend /usr/lib/cups/backend/usb (PID 13601)
    D [03/Jan/2009:13:25:54 -0800] Discarding unused job-state-changed event...
    D [03/Jan/2009:13:25:54 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
    D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Printer using device file "/dev/usblp0"...
    D [03/Jan/2009:13:25:54 -0800] [Job 20] backendRunLoop(print_fd=0, device_fd=5, use_bc=0, side_cb=0x4029f0)
    D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Page = 595x842; 18,12 to 577,830
    D [03/Jan/2009:13:25:54 -0800] [Job 20] slow_collate=0, slow_duplex=0, slow_order=0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_comments - %!PS-Adobe-3.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %!PS-Adobe-3.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%BoundingBox: 0 0 612 792
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Pages: 1
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%LanguageLevel: 1
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentData: Clean7Bit
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentSuppliedResources: procset testprint/1.3
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Creator: Michael Sweet, Apple Inc.
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%CreationDate: D:20070606214000+0500
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Title: Test Page
    D [03/Jan/2009:13:25:54 -0800] [Job 20] %%EndComments
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_prolog - %%BeginProlog
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_setup - %%Page: 1 1
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Before page loop - %%Page: 1 1
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Copying page 1...
    D [03/Jan/2009:13:25:54 -0800] [Job 20] pagew = 559.0, pagel = 818.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
    D [03/Jan/2009:13:25:54 -0800] [Job 20] PageLeft = 18.0, PageRight = 577.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] PageTop = 830.0, PageBottom = 12.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] PageWidth = 595.0, PageLength = 842.0
    D [03/Jan/2009:13:25:54 -0800] [Job 20] Wrote 1 pages...
    D [03/Jan/2009:13:25:54 -0800] PID 13599 (/usr/lib/cups/filter/pstops) exited with no errors.
    D [03/Jan/2009:13:25:54 -0800] [Job 20] /usr/lib/cups/filter/brlpdwrapperHL2040: line 139: /usr/local/Brother/cupswrapper/brcupsconfig3: No such file or directory
    D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:54 -0800] cupsdCloseClient: 10
    D [03/Jan/2009:13:25:54 -0800] PID 13598 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
    D [03/Jan/2009:13:25:54 -0800] [Job 20] /usr/local/Brother/lpd/filterHL2040: line 129: /usr/local/Brother/lpd/rawtobr2: No such file or directory
    D [03/Jan/2009:13:25:54 -0800] [Job 20] GPL Ghostscript 8.63: Unrecoverable error, exit code 1
    D [03/Jan/2009:13:25:54 -0800] PID 13601 (/usr/lib/cups/backend/usb) exited with no errors.
    D [03/Jan/2009:13:25:54 -0800] PID 13600 (/usr/lib/cups/filter/brlpdwrapperHL2040) exited with no errors.
    D [03/Jan/2009:13:25:54 -0800] [Job 20] File 0 is complete.
    I [03/Jan/2009:13:25:54 -0800] [Job 20] Completed successfully.
    D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
    D [03/Jan/2009:13:25:54 -0800] Discarding unused job-completed event...
    D [03/Jan/2009:13:25:55 -0800] [Job 20] Unloading...
    D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 7 GET /printers/HL2040 HTTP/1.1
    D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: Authorized as root using Basic
    D [03/Jan/2009:13:25:56 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13683
    I [03/Jan/2009:13:25:56 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13683)
    D [03/Jan/2009:13:25:56 -0800] cupsdSendCommand: 7 file=8
    D [03/Jan/2009:13:25:56 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
    D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
    D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:56 -0800] CUPS-Get-Default
    D [03/Jan/2009:13:25:56 -0800] CUPS-Get-Default client-error-not-found: No default printer
    D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=406 (client-error-not-found)
    D [03/Jan/2009:13:25:56 -0800] [CGI] show_printer(http=0x152e930, printer="HL2040")
    D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
    D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:56 -0800] Get-Printer-Attributes ipp://localhost/printers/HL2040
    D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
    D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
    D [03/Jan/2009:13:25:56 -0800] Get-Jobs ipp://localhost:631/printers/HL2040
    D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
    D [03/Jan/2009:13:25:56 -0800] cupsdCloseClient: 10
    D [03/Jan/2009:13:25:56 -0800] PID 13683 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
    Cups config:
    # "$Id: cupsd.conf,v 1.1 2006/07/06 13:11:10 tpowa Exp $"
    # Sample configuration file for the Common UNIX Printing System (CUPS)
    # scheduler. See "man cupsd.conf" for a complete description of this
    # file.
    # Disable ssl by default, you have to generate own certs to use this feature eg. by this command:
    # openssl req -new -x509 -keyout /etc/cups/ssl/server.key -out /etc/cups/ssl/server.crt -days 365 -nodes
    # for other certs please refer to openssl manpage.
    # Setting Encryption to not required by default
    DefaultEncryption IfRequested
    # Log general information in error_log - change "info" to "debug" for
    # troubleshooting...
    LogLevel debug
    # Administrator user group...
    SystemGroup sys root
    # Only listen for connections from the local machine.
    Listen localhost:631
    # Socket disabled by default it makes KDE fail on CUPS
    # Listen /var/run/cups/cups.sock
    # To allow remote connections add for example
    # Listen <yourserverip>:631
    # Show shared printers on the local network.
    Browsing On
    BrowseOrder allow,deny
    BrowseAllow @LOCAL
    # Default authentication type, when authentication is required...
    DefaultAuthType basic
    # Restrict access to the server...
    # By default only localhost connections are possible
    <Location />
    Order allow,deny
    Allow localhost
    </Location>
    # Restrict access to the admin pages...
    <Location /admin>
    # Encryption disabled by default
    #Encryption Required
    Order allow,deny
    Allow localhost
    </Location>
    # Restrict access to configuration files...
    <Location /admin/conf>
    AuthType Basic
    Require user @SYSTEM
    Order allow,deny
    Allow localhost
    </Location>
    # Set the default printer/job policies...
    <Policy default>
    # Job-related operations must be done by the owner or an adminstrator...
    <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    # All administration operations require an adminstrator to authenticate...
    <Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
    AuthType Basic
    Require user @SYSTEM
    Order deny,allow
    </Limit>
    # Only the owner or an administrator can cancel or authenticate a job...
    <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    <Limit All>
    Order deny,allow
    </Limit>
    </Policy>
    # End of "$Id: cupsd.conf,v 1.1 2006/07/06 13:11:10 tpowa Exp $".
    Last edited by hbarnwheeler (2009-01-03 23:36:53)

    Downloaded PPD file from here: http://www.profv.de/brother/
    Then, when I went to print, I'd get an error about foomatic.  I installed the following packages: foomatic-db, foomatic-db-engine, foomatic-filters and it worked.

  • Report printing with BI pubisher - 500 Internal server error

    Hi,
    I was having problems using BI publisher to print with. I thought we didn't have it at first, however since found we do have BI Publisher Enterprise edition.
    When I put the settings into APEX, reports don't display as expected. I get
    report error:
    ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.Now if I navigate to the URL in my web browser, http://[server]:[port]/xmlpserver/convert, I get a 500 - Internal Server Error page. The requets is definitely hitting something because if I change "convert" to say "convert1" then I get 404 (as expected). So it seems as if convert is found but then a problem occurs.
    If I navigate to just http://[server]:[port]/xmlpserver/ then I see the BI publisher enterprise login screen.
    Any ideas what might be causing this or what I could do to resovle it?
    Our APEX instance is on a unix box and BI on a M$ box if that matters (long story)?
    Thanks

    Ignacio Cobos wrote:
    Hello
    >
    > I get this error when i try to access to Bex Analyzer
    >
    > ERROR: URL used, "http://sesue:50300", is not fully qualified.
    > A fully-qualified URL has a schema with the format "<protocol>://server.company.com:<port>". URLs with the format "<protocol>://server:<port>" or "<protocol>://<ip address>:<port>" are not fully qualified.
    > See SAP Notes 581329 (Not possible to implement) , 596698 (Not possible to implement) and 654326 (Not yet released)
    >
    > Can anybody say me any idea how to solve the problem?
    >
    > Thanks in advance
    Dear Cobos, For FQDN related issues : Set profile param "icm/host_name_full" with corresponding FQDN via RZ10 transaction. Also check login/create_sso2_ticket & /accept_sso2_ticket parameters in the profile you have created.  Instead of "http://sesue:50300" you may to have the URL like "http://sesue.domain.com:50300//SAP/BW/BEX/". Please refer this #scn article for more details : http://goo.gl/QPlrx Similar Issues : http://goo.gl/mRCh0 Hope it helps. Thanks.

  • My OfficeJet 6110 will print (with errors) with Yosemite but will not scan

    I just finished reading this entire thread:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Mac-OS-10-10-Yosemite-and-HP-Printer-Support/...
    I have rebooted the computer; repaired disk permissions; deleted and added the 6110 back; dowloaded the HP printer drivers and manually installed them; deleted printer and reinstalled printer drivers; repaired permissions again.
    Almost everytime I print, the printer does not actuate and I get an "inkjet error." Then I just print again and it works fine. However, it will not scan and although it shows up in SystemPreferencec>Printers and Scanners, it does not show up in Image Capture or Preview>Import from Scanner.
    I also have an Epson GT-S50 scanner. It scans perfectly without any problem.
    I just changed machines to a new iMac from my earlier Mac Pro. The 6110 worked fine with the Mac Pro running Mavericks.
    Here's the kicker: Although the scanner does not show up under ImageCapture or Preview or when R-clicking the installed printer window, it seems to work fine with the scanning software named VueScan. Under VueScan it shows up as an OfficeJet 6105 but seems to work ok.
    I want to use the native scanning software, however.
    I don't know what to do next.
    iMac Retina 5K running 10.10.1, 32GB RAM
    Thanks Stan

    Hello @snsokstan,
    Thank you for visiting the HP Support Forums! I understand you are running into some problems trying to install your HP Officejet 6110 to your Mac running the new Yosemite 10.10 Operating system.
    I see you have tried all the recommendations to install the printer with no success. After taking a look at the supported printers list on the Apple Site, your printer is not supported. This is why you are running into problems with the printing and scanning.
    I suggest contact our technical support at 800-474-6836 to see what upgrade options they may have available to you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Error printing textField with BevelFilter.

    Hi,
    I have a movie clip with a TextField that has a BevelFilter.
    When I run my movie everything is OK, but when I use the PrintJob
    to
    send it to the printer it seems the textfield has lost filter
    properties. In the page printed by the printer has the textfield
    without the BevelFilter. Why????? Could anyone help me???
    I need to solve this problem as soon as possible.
    Thanks for everything.

    Turns out this whole thing was nothing to do with CUPS, but resulted from my root partition filling up.
    Embarrasing or what?
    Sorry
    Andrew

  • HP Sprout error when printing with PowerDriver from Sawgrass

    HI, i am getting an error when i try to print a project from the Sprout Workplace with the PowerDriver v4 software from Sawgrass. Any info/guidance is greatly appreciated.  Thanks!!

    My workaround by using a virtual PDF printer isn't as good as I hoped. If the files generated by printing with flashplayer exceed about 3 pages the temp file generated in /var/spool/cups is so big that it exceeds my partitions size.
    The file can get up to more than 1GB. With documents from one or two pages the temp file is about 500MB, the correct pdf gets generated after that and is placed under /var/spool/cups-pdf/<user> and is about 500kb small. The very big temp file get's deleted after that.
    Why is this temp file so big and how can I avoid it getting so big?
    Last edited by @op (2011-09-01 20:30:30)

  • [SOLVED] HP laserjet pro p1102 Users help me with CUPS!

    So, I've installed every possible thing for printer, started cups in browser, added my printer etc.
    But under administration tab, where I need to enter a connection with provided examples, I get lost completely:
    Examples:
    http://hostname:631/ipp/
    http://hostname:631/ipp/port1
    ipp://hostname/ipp/
    ipp://hostname/ipp/port1
    lpd://hostname/queue
    socket://hostname
    socket://hostname:9100
    I have no idea what do I set the connection to.
    I've tried http://127.0.0.1:631/ipp/ http://myhostname:631/ipp/   ipp://127.0.0.1/ipp/   ipp://myhostname/ipp/
    all variants give me "The printer URI is incorrect or no longer exists" or "unable to blablabla"
    How do I make this thing work?
    Last edited by tasty_minerals (2011-11-18 08:50:02)

    Finally got it working.
    First you need to run "hp-setup" or "hp-plugin" utility from hplip package. This utility ("hp-setup") downloads the needed proprietary driver for Laserjet Pro p1102, extracts it and installs, then it installs printer and does all the other necessary stuff ("hp-plugin" just downloads, extracts and installs the driver). Then you can finally add a printer via CUPS.
    That is it. Now you're ready to print.
    The common error that may occur while downloading the proprietary driver with "hp-setup" or "hp-plugin" is extraction stage. It is all due to python3, python 2.7 bindings in the system. "hp-setup"|"hp-plugin" use python 2.7 while all modern arch systems are binded to use python3. To fix this simply "ln -s /usr/bin/python2.7 /usr/bin/python".
    Don't forget to put "cupsd" into your daemons array and "lp" to your modules in rc.conf.
    I also didn't blacklist "usblp", just in case.
    And final note, don't forget to add "yourself" to sys group with:
    # usermod -g sys yourusername
    Last edited by tasty_minerals (2011-11-21 19:54:09)

Maybe you are looking for

  • BT activation date confirmed and changed 4 times! ...

    Back in November last year I had placed an order to move my services (phone and BT infinity 2 at the time) to my new home (new build) and asked for an activation date of 22 December. At the time I paid for line rental for onw year in advance, which I

  • LSMW error message

    Hi, While doing LSMW, step-3 Maintain Source Fields I have encountered the following problem "Error when uploading file 'D:\Documents and Settings\ethirajan.v.raghavan\Des' (return code 13)." Message no. /SAPDMC/LSMW_OBJ_020015 Can someone guide me t

  • Error in cost element creation

    Hello, I have just checked the result of my batch input for cost element creation. For asset cost element (category 90) I use the LSMW Forother cost element (charge, products...) I use the classic CO-CEL settings. For example: - if I define the follo

  • MDI windows on the WEB

    Help Are MDI windows supported under the Forms server in Forms 6.0? I get conflicting answers to this when reading throught the documentation delivered on the EAP CD. Thanks Geoff Coleman null

  • HT4759 how can i transfer contact list back to my Iphone 4S

    For some reason,  my contact list disappeared from my 4S. How do I transfer my contact list from icloud to my 4S?