Error printing with Kodak printer dock 6000

Am having some problems printing to the PRinter Dock 6000 from iphoto. the prints are only 1/4 of what they should be. everything in the print setup and print preview looks like it should print fully onto the 4X6 photo paper. It has the most recent drivers. Using the same print setup options, photos print fine using Photoshop. Anybody help out a bit on this?
Thanks

never get the printer to work correctly using iphoto. But Photoshop always works. Kinda wish Apple was as cool as Adobe.

Similar Messages

Anything printed with firefox prints too small

anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

Ok i think i fixed this issues.
i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

Kodak camera dock 6000 will not complete upload to iPhoto

After installing Yosemite and updating I photo, My Kodak camera dock 6000,opens I Photo and starts the upload but goes no further.

Hi Larry,
Removing the card and loading through the reader slot works fine. Using the camera dock iphoto recognizes the camera and starts the loading process but doesn't show any pics or complete the loading.

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

Batch Printing with Desktop Printer

I have been batch printing with a desktop printer to a ethernet connected xerox phaser printer. The files are doc files that I drop onto the desktop printer to automatically print anywhere from 10-30 files at a time. I either use TextEdit or Pages as the default program for the files so I do not have to deal with the print dialog box that comes up with Microsoft Word. My problem is that if I send 20 files for example, only a certain number of them will actually print and the job of printing all of them is not completed. It appears random. Sometimes it may get through 5 and othertimes 15 files before it stops. There is no error message and it seems as if everything was sent to the xerox printer fine...
Any advise would be appreciated

I spoke with Xerox support. They suggest typing your printers IP address in a browser, clicking on PROPERTIES, select GENERAL from the file menu on the left, then select PRINTER DEFAULTS. Change Timeout Settings from a default of 120 to 999.
Apparently the printer drops info if it takes longer than a specific duration so if there is network traffic or a large number of files are being sent all at once.
I just changed my settings so we shall see if this works

Cannot print with wireless printer

I am having issues with my wirelss printer. It worked well until a couple of weeks ago, and I don't know what has changed. I have done all the troubleshooting possible, noting is resolved. When i turn the printer on, the screen keeps saying there is an issue with a printer cartridge, there isn't that always comes up. But, it will not let me access the screen on the printer, to use the wireless wizard thing. Is there a way around this screen issue? It is a HP Photosmart D110 series printer. I don't really want to buy a new one!

Hello sturner12a.
I understand you are experiencing issues with your Photosmart D110. Could you verify the exact error message on your printer? I understand you are unable to use your touch screen on your printer.
Once I verify this information I can assist you further with troubleshooting steps.
Looking forward to hear from you.
I worked on behalf of HP.

Printing with SMC4007ABR Print Server to PostScript Printer

I've just set up my Mac Mini in a new network configuration, with an old SMC4007ABR router/print server printing to my Ricoh Laser AP2100 printer, using IPP printing and the configuration for a Generic PostScript printer, which had worked for this printer in previous setups. I am using the IP address of the router, 192.168.2.1, and the queue name specified in the documentation "lpt1". When I log into the router to view the status page it says the printer is idle and ready. When I submit a print job, I get the message "Network host '192.168.2.1' is busy; will retry in 30 seconds...".
I have tried deleting the printer queue and recreating it, using the queue name with upper case, using the queue name specified for use with Windoze ("LP"), changing the router configuration from DHCP to manual IP assignments and back again, resetting the print system from the Printer Setup Utility, using the CUPS interface at http://localhost:631/ to modify the printer setup in any sane way I could think of. I have looked at anything I could find in this forum that seemed relevant, but haven't found anything to try which I haven't tried. I have tried the SMC technical support system, but the router is no longer supported by them, but by another firm which charges per incident, and doesn't support Macintosh.
I would appreciate any suggestions from people who know idiosyncracies of this router, or who have fruitful insights into this strange behavior. Clearly my Mini sees the printer queue, but not well enough to be able to transmit data to it. Thanks for any insights you can offer.
Regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

Thanks very much for your response. It seems I was ignoring the answer in some of the posts I was looking at, having misjudged that they were applying to a different sort of situation. I can't even remember what set of instructions from years ago established such a strong prejudice that I needed the IPP protocol. In any case, I'm grateful for your help.
Best regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

Printing to Kodak printer

Hi I can print my photos from iPad to Kodak c310 printer via the Kodak app ok, but I can print a web page or anything else , how can I resolve this, I think I may need an app but don't know which one if so

not sure if there is an app, per se
http://store.kodak.com/store/ekconsus/en_US/pd/productID.223044800
check out what Kodak has on their site. They seem to have a version of air print (really cloud printing) via google cloud print.

White fonts on black background printing with zebra printer

Hello,
I've created a label in Adobe forms, which should be printed with a ZEBRA 220XiIII plus.In the label there is a text that should be printed in white fonts on a black background. The problem is that when I print the label, the white text is not printed, I have only a black background. The print preview is ok, and if I print the label on a laser printer it is ok too.
Does someone have any idea?
Thanks.
Benjamin

The above code i have used is to print a Maxi code Symbol.
[)>_1E01_1D96841706672_1D840_1D001_1D1Z12345675_1DUPSN_1D123X56_1D187_1D_1D1/1_1D10_1DN_1D_1DSALT LAKE CITY_1DUT_1E_04
this code is in the format:
[)>Rs Message Header
01Gs96 Transportation Data
Format Header
841706672Gs Postal Code
840Gs Country Code
001Gs Class of Service
1Z12345675Gs Tracking Number
UPSNGs SCAC
123X56Gs UPS Account Number
187Gs Julian Day of Pickup
Gs Place holder for
Shipment ID Number
1/1Gs Package n/x
10Gs Package Weight
NGs Address Validation
Gs Place holder for
SHIP TO Street Address
SALT LAKE CITYGs SHIP TO City
UTRs SHIP TO State
Eot End of Transmission
[)><RS>01<GS>96841706672<GS>840<GS>001<GS>
1Z12345675<GS>UPSN<GS>123X56<GS>187<GS>
<GS>1/1<GS>10<GS>N<GS><GS>SALT LAKE CITY<GS>
UT<RS><EOT>
My code is based on the above format that should print UPS Maxicode Symbol
but the maxi code symbol is not geeting printed. Can you help me on this.

Print with laser printer

Hi everyone,
I'm developing an application that should print its JTexPane with 'Arial Unicode' font. I use a styled document. When I print with a deskjet, there isno problem ,my text is perfectly rendered.
But, when I print with the laser printer, the text is always in bold. This printer doesn't accept 'Arial Unicode' in its properties. I have to be able to print unicode font (chinese, ...) and the printer doesn't have any unicode font in its settings...
Is there anything I can do ?
Thank you.
Pascal

I am also experiencing similar problems. I am trying to print a JEditorPane rendered HTML-document. On screen it looks good, but when sending it to either a PDFCreator or printer, bold and italic text looks really wierd. Does anyone have a solution to this problem?
I can post some code or the PDF file if someone wants to see it.
Thanks in advance.
Magnus

How to use AE for wireless printing with Ethernet Printer?

Hi all,
I have been using my AE connected to a printer via USB for printing but have now replaced my printer with another model that only has Ethernet connections.
Can someone please explain how to set up the AE so that I can print? I can get so far but seem to be doing something wrong somewhere. Here's my setup:
Mix of Macs and PC's using Airport Time Capsule for wireless network. Currently setup as 'Create a Wireless Network'
1 x b/g Airport Express - now with Ethernet connection between AE and Printer. Currently connected as 'Join a Wireless Network'
Via 'Add Printer' I have selected 'Internet Printing Protocol - IPP' as the Protocol and added the IP address of the Airport Express '10.0.1.10' as the Address. This seems to connect OK but all I get is printer paused.
Any idea where I am going wrong please?
Many thanks, Mike

Sorry you are having difficulties.
Suggest that you first get the printer working with your AirPort Extreme in case the configuration on the Express may not be quite right.
I'm not familiar with the Epson products, but I do use an HP ethernet all-in-one device.
The basic "must do's" on the device include entering the printers MAC address and assigning a fixed IP address that the printer will always will receive using a DHCP Reservation on the AirPort Extreme. My all-in-one gets 10.0.1.25 It sounds like you may have done this.
After installing the printer software from the disc, you go into the Mac's System Preferencesj > Print and Fax and click the small + (plus) button at the bottom of the printer list. The HP printer appeared immediately as an available printer, so click it to highlight it and then click Add at the lower right. It's been flawless since it was installed about 3 months ago.
You'll need to Add the device for each Mac computer on the network. I don't use PC's but imagine that Add Printer or Add New Device would be the way to go here.
Sometimes it helps to call the manufacturer and endure the hold for 15-20 minutes waiting for the manufacturer's tech support people.

Margin problem when printing with canon printer

When I try to print a pages document on my canon pixma ip4500 printer (which they sold me at the apple store when i bought the laptop), the bottom margin does not appear. There is a space only about half an inch under the last line of text. Everything looks fine on the screen, but i cant get to print it with a bottom margin. and i don't even know how to set it manually...
ps, the printer isnt set for a 8 1/2 by 14 sheet, it really is for a 8 1/2 by 11
Help me please!

That’s going to depend on what the document consists of. If it’s a single element such as a graphic or PDF, reduce the size. If it’s text, you can use a smaller point size, slightly reduce paragraph spacing, make a headline smaller, etc. If it’s text and graphic, reduce the size of the graphic(s) a little. But first, set your document margins to agree with your printer margins.
Walt

Cp1700 - Any problems with switching existing printer with stored printer?

I am having problems reading the LCD panel for my cp1700 (not all the text shows - common problem). I have another cp1700 that I have had stored for about 5 years (saving for parts. I think this "stored" printer squeaked when printing). I considered switching the LCD panels but it looks as if this is a complicated procedure. So I am wondering if I will encounter any problems with switching the printers? I will be putting in new ink cartridges but wondering if the printheads will cause a problem after being stored for so long?

This don't completely resolve your concerns, but I've had no trouble printing from OS X 10.7 to an Epson Artisan 810 connected to a Mac running OS X 10.6.8. I may even have been able to print to it wirelessly, but I can't remember. Apple issued an update to the Epson printer drivers fairly recently, which one would hope would have addressed any issues. In any case, I'd make a bootable clone of your Mac before you upgrade. If things aren't as you hope, then you can restore the clone to your main disk drive and be back with OS X 10.6.

Additional Page printed with each print

Hi there
My Hp eprint 8600 prints a additional page with each print. This only occurs when I eprint from Pastel. The extra page has the following on it,"Tax Invoice number #### from Boland Dry Ice Bpk." I use Pastel Xpress Version 12 and I have Windows 7 Home Basic. I want to get rid of the extra page being printed, because it adds up to a lot of useless pages.
I have consulted with Pastel, and their customer service couldn't find any problem from Pastels side.
Maybe the subject gets printed when using Pastel....
Please Help

Hi TristanvH,
I understand you have already addressed this issue with Pastel and you feel the issue is in some way related to the printer. I suggest running the Print and Scan Doctor. The HP Print and Scan Doctor was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers. Click here to download and run the utility.
If the Print and Scan does not find an issue, I recommend uninstalling and reinstalling the Pastel program. I personally feel that the issue is related to the program, it seems as though something is stuck. Do you have a file on your computer related to "Tax Invoice number #### from Boland Dry Ice Bpk", or have you recently printed something similar?
If it was happening from other programs, I would suspect it was within the settings of the printer properties. There is an option there for adding or removing a separator page, but the issue you are experiencing is isolated to Pastel.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error printing with Kodak printer dock 6000

Similar Messages

Maybe you are looking for