Error PRKR-1007 while creating a database

Hi
We have an oracle RAC with a 10.2.0.4 database over linux. Few days ago we drop a database with the dbca assistant. Now we need to create one with the same name with dbca, but it shows that the db_name already exist. Trying to delete again the SIGES database we are having this error:
PRKR-1007 : getting of cluster database SIGES configuration failed, PRKR-1078 : Database SIGES cannot be administered using current version of srvctl. Instead run srvctl from /oracle/db.
When we accept the message, the dbca window shows a list with de actual databases, including the one we drop before but with "inactive" state.
If we check .inst, db, srv and cs services, all them still exist with TARGET and STATE OFFLINE.
Please help

check "srvctl", where location?
$ type srvctl
srvctl is CRS_HOME/bin/srvctl
Or use srvctl at Oracle Home
$ /u01/app/oracle/product/10.2.0/db/bin/srvctl status database -d db_unique_name
$ /u01/app/oracle/product/10.2.0/db/bin/srvctl stop database -d db_unique_name
$ /u01/app/oracle/product/10.2.0/db/bin/srvctl start database -d db_unique_name
refer the link:-
Cannot start RAC DB using srvctl start database
10g and 11g CRS/RAC/ASM on the same nodes

Similar Messages

APP-RG-09518: An error occurred while creating a database link

Hi All,
While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports
Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link
Prior to the above...below steps should be done on the server.
1.grant create database link to <apps.user>; (on db server)
2.source tns entry should be in destination tns file and destination tns entry in source tns file. (check tnsping after entry)
3.*make sure destination tns entry of 8.0.6 oracle home should be in source tns file* (Because we are creating db link for the application)
4.Run the Program FSG Report.
Regards,
Harish Muramshetty.

Hi,
I have solved the issue as below:
This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.
I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
then it disappear. So use latest sql files in your software too.
My software was replacing the the latest files with older version.
Muhammad Arshad Awan

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

Oracle not available while creating RAC database

Hi,
I have got 2node Oracle 10gR2 RAC installed on solaris 10 and am using NFS for keeping clusterware and database files.
cluvfy with pre dbinst option ran successfully.
Now while creating RAC database through DBCA, I am getting Oracle not Available error message. No relevant message written in alert log.
Can you suggest me as to what to do to resolve the issue please.
Thanks in advance.

Do you see any kind of logs under $OH/cfgtool*/dbca/..may be it will help with some pointers. If that doesn't give any useful information, try to startup nomount the instance using a sample init.ora file to see if reports anything in the alert log.
Thanks
-Chandra

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

Keychain error -25299 occurred while creating a System Keychain entry for t

Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
I keep getting the error above every time I try to set up my time capsule
Could use some help?
Mahalo

Same here.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

Accounts determination error is coming while create billing.

Hi Experts,
Accounts determination error is coming while create billing for Account Assignment Group A4 . In some cases only this error is appearing . I m a ABAPer I got this case and I m debugging the code . Can anyone suggest me what all the things i need to check to know the root cause . This error is coming very rarely but I want to find the reasons. I saw some of scn post bt it was not clear .
Please suggest briefly what w'd be the probable cause of this error and how to correct it.
Thanks in advance

Hi Dharmkrit,
In one of your earlier posts, you have mentioned that you have assigned G/L accounts by selecting table 1. This is probably where you might be going wrong.
Please follow the below steps to cross check your entries and you should hopefully have a solution.
(1) First of all, start from the account determination procedure and check which procedure is assigned to the billing type.
(2) Check the account determination type that is maintained in the procedure.
(3) Check which access sequence assigned in that condition type
(4) Check which table/tables have been maintained in the access sequence
* In most probability, you would have maintained a different table in the access sequence while you are trying to assign your G/L accounts to some other table
* Also, since you say that this error is only for a particular account determination type, check if you have maintained the correct combination of application/chart of account/Customer account assignment group/material account assignment group/G/L account in the correct table. However, this combination of fields depends on the table that you have used in the condition technique.
I suggest that you write your entries down while checking the flow. This will give you a clear picture if a connection is missing somewhere in the condition technique.
The customer/material account assignment groups are just keys (two digit codes) and their determination has nothing to do with Z1/Z2/A1 or any other code that you have defined in the system. The main determination is purely based on the condition technique and how correctly you have maintained the connections between the tables, access sequences, types and procedures. Just recheck these entries and you should be able to resolve the issue.
Hope this helps
Regards,
Sumita Mittra

HT201514 I keep getting this message "Unable to complete back up an error has occurred while creating back up folder" Why is this happening and is it time to purchase a new tim machine?

I keep getting this message “Unable to complete back up an error has occurred while creating back up folder” Why is this happening and is it time to purchase a new tim machine?

Check out the Apple Support Communities Time Machine expert Pondini's troubleshooting article on this exact topic. Hopefully, it will help.

DBCA ERROR WHILE CREATING A DATABASE

While creating a RAC database using DBCA, DBCA gave the folling error -
"Virtual IP address is not configured for cluster node "pdb1". Run
"/opt/app/oracle/product/10.2.0/oracle/bin/vipca" as "root" user to configure
it before performing the "create Database opration"
I couldn't find vipca in oracle home.
So, i started vipca from crs home as a root user and i got the following error
while configuring the VIP -
" CRS-0211: Resource 'ora.pdb1.vip' has already been registered"
Thanks,

A bit old but still useful info for Raw Device
http://www.fors.com/orasupp/unix/37914_1.HTM
If you are using 10gR2 consider use ASM instead.

Error While Creating Essbase Database From Hyperion Planning

Hi,
While creating the Essbase Database From the 'Manage Database' in Hyperion Planning, I am getting the following error:
com.hyperion.planning.olap.EssbaseException: Account (1060000)
It gets stuck at Adding Dimensions.
I have tried reconfiguring Planning, but no luck.
My Relation Repository is MS SQL Server 2005 and the Essbase and Shared Services are on a Linux box.
I am getting the following error in the Planning log
[12-Nov-2009 10:50:41]: Propegating external event[ FROM_ID: 68b6dbf1 Class: class com.hyperion.planning.sql.HspLock Object Type: -1 Primary Key: 50001 ]
[12-Nov-2009 10:50:41]: Processing cube: Plan1
[12-Nov-2009 10:50:41]: Setting System CFG properties for Attribute Dimensions
[12-Nov-2009 10:50:41]: Adding dimension: Account
[12-Nov-2009 10:50:41]: Closing outlines
com.hyperion.planning.olap.EssbaseException: Account (1060000)
     at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimension(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
     at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
     at com.hyperion.planning.HspJSImpl.runCubeRefresh(Unknown Source)
     at com.hyperion.planning.HyperionPlanningBean.runCubeRefresh(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     at java.lang.Thread.run(Thread.java:595)
Thanks for your help.
Edited by: user524093 on Nov 12, 2009 4:38 PM

Have you tried restarting the services and giving it a try?
Which version of Essbase/Planning are you on?
If your Essbase server name has more than 30 characters, please use NODENAME with short server name.

Error While creating new database connection from HFM workspace

Hi,
We have recently installed HFM and was trying to create database connection from database connection manager in HFM workspace.
I am getting below error:
"Error connecting to database connection : no HssJNIDriver950 in java.library.path" initially and later
"Error connecting to database connection : com/hyperion/ap/adm/HssConn".
Any information in this direction would helpful.
Thanks,
Bhargav
Edited by: bhargavr on Jan 24, 2011 6:55 PM

Hi bhargavr,
We came accross the same issue. Try the following solution below for this 'KNOWN ISSUE' and let me know how you get on. Drop me a note if you have any questions regarding this post.
Error: *"Error connecting to database connection: com/hyperion/ap/adm/HssConn" While Creating a Financial Management Database Connection* [ID 1102697.1]
Modified 04-JAN-2011 Type PROBLEM Status PUBLISHED
Applies to:
Hyperion BI+ - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
Microsoft Windows x64 (64-bit)
Symptoms:
You are running the Financial Reporting Web Server on a 64-bit server.
When you try to create a new Financial Management (HFM) database connection using the Database Connection Manager in Workspace you receive the following message:
“Error connecting to database connection <connection_name>: com/hyperion/ap/adm/HssConn”
You can create a database connection in Financial Reporting Studio. When you refresh a report with a Financial Management database connection, you receive one of the following messages:
“1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: com/hyperion/ap/adm/HssConn”
or
“1001: Error connecting to database connection <DATABASE_CONNECTION_NAME>: no HssJNIDriver950 in java.library.path”
Cause:
The issue is documented in unpublished bug 9537050, and in Known Issues in the 11.1.2 Reporting and Analysis Readme. Cross-reference unpublished bug 9707353.
Solution:
In the Windows registry, take the following steps:
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\HyperionSolutions\FinancialReporting0\HyS9FRReports.
For each of the following entries, prefix the contents with text in the blue box: Env2, JVMOption13, and JVMOption17 (note that the JVMOption numbers might be slightly different in your environment).
C:\Oracle\Middleware\EPMSystem11R1\common\ADM\11.1.2.0\bin-64
If your EPM_ORACLE_HOME is not located at C:\Oracle\Middleware\EPMSystem11R1, replace that location with your location.
Restart the server.
G'Luck,
-David

While creating RAC database on IBM AIX 5.3 following errors occur.

Hi,
I am creating a Oracle database on following configuration IBM AIX 5.3 box:
OS: IBM AIX 5.3
DB: Fresh installed Oracle 9.2.0.1 upgraded to Oracle 9.2.0.7 (Patch)
While creating a RAC database on the above server i got following errors:
ORA:00603 : ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
ORA-27504 : IPC error 380 OSD context
ORA-27300 : OS system dependent operation : if_not_found failed with status:0
ORA-27301 : OS failure mesage: error 0
ORA-27302 : failure occured at:skgxpbaddr9
Licence high water mark = 0
Can any 1 help me out.Are the above error related to OS or something is wrong with the OS cluster / RAC. I tried creating single instance database on either of the server which are in cluster, no success.
Also 1 more thing i would like to add is that iam able to create single instance database on server which are not in cluster.
Any help regarding the above error is appreciated.

This is a bug (for patchsets 9.2.0.6 and higher), see metalink:
UNABLE TO START RAC INSTANCE AFTER APPLYING PATCHSET 9.2.0.6 ON AIX
Note:300218.1
Werner

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

Error PRKR-1007 while creating a database

Similar Messages

Maybe you are looking for