Error processing calendar data (210) after installing Sec Update 2010-1

When we were first setting up the web calendar, we had some trouble with 210 errors because the directory we were storing the calendar data in didn't have the right permissions. We reverted the data store to the default location Library/CalendarServer/Documents, with the Documents folder having the _calendar user as owner, with read & write access, the _calendar group having read only access, and everyone having no access.
This hasn't changed.
However, after installing the Sec Update 2010-1 last night, we're getting 210 errors again. Any ideas?

Looks like it's a DNS issue for me
2010-01-21 16:15:02-0500 [-] "Error processing data from calendar server: DNS lookup failed: address u'fileserver.mydomain.com' not found: (8, 'nodename nor servname provided, or not known')."

Similar Messages

A Different "Error processing calendar data (210)"

*What is the next step to get rid of this error?*
Blogs and Wikis work on our server's web portal fine. The group Calendar service does not.
(Individual users on their client can create and share calendars using Apple's iCal software.)
Upon loading the Calendar page, I receive a "Error processing calendar data (210)" error. I receive the same error if I try to create an event.
I have read fully the following posts:
http://discussions.apple.com/thread.jspa?threadID=1346536&tstart=-1
http://discussions.apple.com/thread.jspa?messageID=7498100
http://discussions.apple.com/thread.jspa?threadID=1788666&tstart=0
+The second thread's post by Cyrus (http://discussions.apple.com/message.jspa?messageID=7484449#7484449) solved the "Record disabled due to conflict" error messages in iCal Server's Error Log.+
I would like very much to make this work, because our 200+ user-base (of mostly Apple clients) needs the organization it could bring.
*Our setup is as follows:*
Rock-solid DNS (finally) and an OD Master on one server (all other servers are "connected").
Mail and a Website (Wiki, Blog, and Calendar enabled) on another server.
The location for iCal is on a separate server that is also hosting our database.
+Honestly, I feel I'm missing something basic. I think I remember something about iCal needing to be hosted on the same server as an O.D. Master or Replica. Is this true?+
*What I think to be the relevant portion of the Error Log is as follows:*
2008-11-14 16:35:22+0800 [-] [caldav-8010] [OpenDirectoryService] Reloading users record cache
2008-11-14 16:35:22+0800 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/LDAPv3/dir.cesci.net': '/LDAPv3/dir.cesci.net'> has no GUID; generating service GUID from realm name."
2008-11-14 16:35:22+0800 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/LDAPv3/dir.cesci.net': '/LDAPv3/dir.cesci.net'> has no GUID; generating service GUID from realm name."
2008-11-14 16:35:23+0800 [-] [caldav-8009] [OpenDirectoryService] Reloading groups record cache
2008-11-14 16:35:23+0800 [-] [caldav-8011] [OpenDirectoryService] Reloading groups record cache
2008-11-14 16:35:23+0800 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/LDAPv3/dir.cesci.net': '/LDAPv3/dir.cesci.net'> has no GUID; generating service GUID from realm name."
2008-11-14 16:35:23+0800 [-] [caldav-8012] [OpenDirectoryService] Reloading groups record cache
2008-11-14 16:35:23+0800 [-] [caldav-8009] [OpenDirectoryService] Reloading locations record cache
2008-11-14 16:35:23+0800 [-] [caldav-8011] [OpenDirectoryService] Reloading locations record cache
2008-11-14 16:35:23+0800 [-] [caldav-8009] [OpenDirectoryService] Reloading resources record cache
2008-11-14 16:35:23+0800 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/LDAPv3/dir.cesci.net': '/LDAPv3/dir.cesci.net'> has no GUID; generating service GUID from realm name."
2008-11-14 16:35:23+0800 [-] [caldav-8011] [OpenDirectoryService] Reloading resources record cache
+The "/LDAPv3/dir.cesci.net" occurred after changing the /etc/caldavd/caldavd.plist file's '<key>node</key>' value from "/Search" to "/LDAPv3/127.0.0.1". This was based off of Cyrus' advice in the above-mentioned post (http://discussions.apple.com/message.jspa?messageID=7484449#7484449)+
Message was edited by: Wesley.Bomar (Log snippet added)

I was mistaken about which server Wiki and Blog are on, and which server iCal is on.
All three are now on the same server and web calendar seems to work. It's odd though:
When I login to the web calendar for a new group, it creates a new folder in calendars/_uids_/ (not in calendars/groups...). And it also creates 4 folders in principals/_uids_/:
XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX#calendar-proxy-write
XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX#calendar-proxy-read
XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
YYYYYYYY-YYYY-YYYY-YYYY-YYYYYYYYYYYY
Server Admin reports iCal has 1 Calendar, but 3 Groups. I'm guessing it is still remembering two other groups I tested before, but have since disconnected from web calendar. All three groups have a folder in /Library/Collaboration/Groups/.
*Is this all normal?*
I saw no folders appear within calendar/groups, and the principals/groups folder does not exist.

Applications crashing after installing security update 2010-003

Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

http://www.thexlab.com/faqs/multipleappsquit.html

Error connecting to Version Cue after installing Safari update 3.1.1!

I'm having trouble restarting the Version Cue server. It was running just fine before my Mac (OSX 10.4.11) restarted after installing the Safari 3.1.1 update this morning. This is the error message I receive when attempting to start VC:
Version Cue CS3 could not be started.
Please check the Version Cue CS3 logs.
So I checked the logs by browsing through the Library/Application Support/Adobe/Adobe VersionCue/Server/logs
Below, please find the chunk of information from the log where the problem began. I'm not saavy at all with this - but I do see in the log something about mDNS and after dealing with this problem all morning, I caught a bit of talk in other forums about this particular Safari update changing your DNS settings. Is this related? If it is, what should I do? If it isn't, what should I do?
2008-04-28 10:30:19,127 [main] OFF com.adobe.versioncue.boot - ### Stopping Version Cue® CS3...
2008-04-28 10:30:19,303 [Thread-4] ERROR com.adobe.versioncue.svdiscovery - mDNS error during service registration: <-65537> N/A
2008-04-28 10:30:28,617 [main] OFF com.adobe.versioncue.boot - ### Version Cue® CS3 shut down.
2008-04-28 10:32:51,009 [main] OFF com.adobe.versioncue.boot - ### Starting Version Cue® CS3...
2008-04-28 10:32:57,139 [main] OFF com.adobe.versioncue.core - ### This is Version Cue Server build 3.1.0/0server46
2008-04-28 10:33:06,198 [main] OFF com.adobe.versioncue.boot - ### Version Cue® CS3 up and running.
2008-04-28 10:34:17,723 [main] OFF com.adobe.versioncue.boot - ### Starting Version Cue® CS3...
2008-04-28 10:34:17,904 [main] OFF com.adobe.versioncue.core - ### This is Version Cue Server build 3.1.0/0server46
2008-04-28 10:34:18,028 [main] OFF com.adobe.versioncue.persistence.mysql - Database already running on port 50702
2008-04-28 10:34:18,029 [main] OFF com.adobe.versioncue.persistence - Server shutting down due to database error...
java.lang.IllegalStateException: Unable to start database.
at com.adobe.versioncue.internal.persistence.databases.mysql.Database.start(Database.java:11 1)
at com.adobe.versioncue.persistence.PersistenceComponent.ensureRunningDatabase(PersistenceCo mponent.java:474)
at com.adobe.versioncue.persistence.PersistenceComponent.internalStartup(PersistenceComponen t.java:488)
at com.adobe.versioncue.persistence.startup.PersistenceStartupActivator.start(PersistenceSta rtupActivator.java:49)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:9 95)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:989)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:9 70)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:317)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:256)
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.preFindLocalClass(EclipseLaz yStarter.java:86)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :409)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:188)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:33 9)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:391)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:352)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at org.eclipse.osgi.framework.internal.core.BundleLoader.loadClass(BundleLoader.java:276)
at org.eclipse.osgi.framework.internal.core.BundleHost.loadClass(BundleHost.java:227)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.loadClass(Abstract

Jasker - Thanks you for trying to help, but it didn't work. I followed your directions. Then I attempted to restart the Version Cue server and a Safari browser opened and pointed to http://localhost:3703/ with the message "Safari cant connect to the server.
Safari cant open the page http://localhost:3703/ because it could not connect to the server localhost."
I just want it to start up again so I can properly retrieve all of our projects! Even if I can get it back up, I don't think I will use Version Cue the way we used to, now that I know how unreliable it can be.
Can anyone at least offer advice on how to salvage shared projects (created and maintained by 2 different users) from the Version Cue server when it's offline?

Clamd fails after installing Security Update 2010-004

A few months ago while running clamav-0.96, I began to get "Assertion failed" notices in my system log. But I applied a PowerPC patch available at clamav.net and that solved the problem. Later on, I updated to clamav-0.96.1 and everything continued running fine until yesterday when I installed Apple's Security Update 2010-004. Now I'm seeing the "Assertion failed" messages in my system log again just about every 10 seconds:
Jun 17 07:55:17 nagxserveg5 net.clamav.clamd[686]: Assertion failed: (ResultPtr
= -(1 << 23) && ResultPtr < (1 << 23) && "Relocation out of range!"), function
relocate, file llvm/lib/Target/PowerPC/PPCJITInfo.cpp, line 399.
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Formulating crash report for
process clamd[686]
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Saved crashreport to
/Library/Logs/CrashReporter/clamd2010-06-17-075517NAGXServeG5.crash using
uid: 0 gid: 0, euid: 0 egid: 0
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd[686]):
Exited abnormally: Abort trap
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd): Throttling
respawn: Will start in 1 seconds
I tried reinstalling clamav-0.96.1 (configure/make/make install) and
rebooted, but that didn't help. And attempting to reapply PowerPC patch, I just
get the message that the patch is already applied. I have had to turn off virus scanning in ServerAdmin/Mail service in order to send/receive any mail. Otherwise, everything fails in virus scanning and just ends up sitting in my Mail Queue.

Yes, but you also mentioned that you tried to apply the patch which is not needed
Looks like a freshclam update broke things then. Until they reliably sort it, you can safely rebuild ClamAV using --enable-llvm=no or --disable-llvm (don't remember which one is correct off the top of my head).

Ethernet has stopped working after installing "Security Update 2010-003"

I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
Much thanks for any recommendations you may have.

Hussain Ameen wrote:
I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
Welcome to Apple's discussion groups.
I'm not having that problem after installing the security update.
If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

After installing Security Update 2010-006...

Hey guys,
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
It cannon to any wifi network and also sometimes no network can be found.
What can I do?

Cheong! wrote:
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
If those don't help, I'm not sure I have any other advice.

Error when burning data dvd after installing 7.3.2.6

Making a data backup of a playlist of about 400 songs. Around 6 songs have the exclamation point with the error message "The song could not be used because the original could not be found. Would you like to locate it?" I located the originals and then went to burn again. Same error message on the same songs. On my library, these six songs are just fine (no exclamation mark) and the original location is plainly listed under "Get Info" and "Where." Is there a solution?

The mystery thickens. I added songs to the playlist. Only 79 of them made it to the DVD. However, the songs that previously had the exclamation mark were among the few that made it onto the DVD. No explanation for why the rest of the songs were not included.

Started having "smtp timeout error" when sending e-mail, after installing Thunderbird update on 1.4.15 .How to undo the update?

Thank You!

has you anti virus vendor sent their update yet to fix the problem?
If not, turn off outgoing email scanning in your anti virus program.

Secure Empty Trash Problem After Installing Security Update 2010-005

Some items in trash were locked, selected option to remove all items and nothing was deleted. Rebooted twice, no change. Unsecure empty trash works fine. Any ideas?

Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001

Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

After installing security update 10.6.8 I've seen dialog boxes asking me if I will permit certain root processes, e.g. configd, to receive unsolicited messages from the internet. What are the consequences of denying these requests?

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

Getting error in sdp94 " data partly after horizon" any suggetionu2026

Hi gurus,
i have changed period in SBP and in SE38 planning area initialization in variants changed /SAPAPO/TS_PAREA_INITIALIZ ) , still getting error in sdp94 " data partly after horizon" any suggetionu2026
babu

Hi Babu,
Kindly check till when is the planning area initialized. Goto //msdp_admin, right click on the planning area---> Created time series objects. Check the date till when it is initialized. You can save the data only if it's in this period. In the planning book there may be dates after the planning horizon also in which case you can't save data.
Thanks and Regards,
Nithin.

TS3694 I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

I am unable to view My Wish List on the ITunes Store After installing the updated ITunes. It shows an Error -1202 and says try again later. But it never works.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Error processing calendar data (210) after installing Sec Update 2010-1

Similar Messages

Maybe you are looking for