Error : Product Context LOV no entries.
hi all
the problem i am facing while creating one new price list.
when i click on product Context LOV i get the error saying list of values contains no entries..
can any bdy help me out please.
regards,
gaurav
Check if Product context -Item is enabled.(Pricing Manager>setup>attribute management>context and attributes)
Similar Messages
-
Hey i need help because i keep getting this when i try download after effects CS6 trial all other products ont do this but this
Hey i keep getting Invalid product context Error communicating with Adobe.com (Error 101) but only for Adobe After Effects CS6 all other product trials download but this one please HELPAnd what are your system specs? it simply thinks your system doesn't qualify for AE, but it can't verify the settings.
Mylenium -
After Effects download - Invalid Product Context error
Trying to download After Effects from :
http://www.adobe.com/cfusion/tdrc/index.cfm?product=after_effects
getting error "Invalid Product Context" "Error communicating with adobe.com (error 107)....."
Tried from multiple computers with different browsers.. cannot get it to download!Jeff! Are you not listening? THERE IS NO OPTION TO CHOOSE THE FOLDER TO DOWNLOAD TO, It fails before it gets this far. I've tried this with Chrome and Firefox, and I get the same result. And as I say, it seems odd to me that Dreamweaver, Illustrator and Photoshop CS6 would would all download smoothly, and without problem, if there were a browser issue causing the problem with After Effects. I will also say again that I was having this same exact problem trying to download AE CS5.5 just prior to the update. I'm presuming that After Effects trial is coming off of a different server? Has anyone checked that machine to make sure it's working, connected, etc.? The message I'm receiving sounds to me like ADA goes to DREAMWEAVER.ADOBE.COM and connects and downloads no problem, it goes to ILLUSTRATOR.ADOBE.COM and connects and downloads no problem, it tries to go to AFTEREFFECTS.ADOBE.COM and can't make a connection. Perhaps Adobe needs to check their hardware?
-
Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR
While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thankssteve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj. -
Error while opening the receipt entry form in AR module.
Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein -
Error " Data missing for the entry check while creating a new waste code
Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
AlvaroHello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro. -
Error during context generation
Dear Friends,
In interactiveForm UI, when i put adobe form name in Templatesource and try to generate context automatically,
i get an error message ' Error during context generation ' and an empty context node is created.
i manually create attributes under that node and populate them in wddoinit method.
but i dont get those values on PDF output.
What may be the error ??
Kindly suggest.Hi Otto,
I want to display data of an internal table in adobr form using web dynpro abap and adobe interactive form.
my web dynpro abap application is ready and adobe form is also ready.
when i integrate adobe interactive form on WDA and put form name in TEMPLATESOURCE and press enter
it throws an error message - 'Error in context generation' and an empty node is generated in WDA.
on running the application adobe form is displayed but no data is displayed.
what may be the error ?
i maintained attributes of node manually but then also no data is displayed.
that means data binding is not successful.
what may be the case ???
kindly suggest -
Error while creating table 'EDISEGMENT' entry for Transfer Structures
Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
GHi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'
Hi All,
I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate as the number of transfer rules with this issue are huge in number.
Please suggest the suitable solution
Thank you in advance
krishna
Edited by: krishna dvs on Feb 17, 2009 1:24 PMHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'
Hi experts,
when I import my transport request to QA, I am getting this error
"Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
the performance assistance reads as below..
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
System response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have an entry for '/BIC/CIWA0TRZONE_TEXT' in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
thanks in advance
D BretHi,
can you please be more precise with your enquiry?
As far as I read the note, it is quite explanatory....
What is your source system release?
You'll need to implement this prog in your source system and execute it there.
If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
does it answer your question
Olivier. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
When I am activating the transfer rules of 0divison_text giving me the error
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists.
I have checked the note 493422 but I did not understand it can any one help me in this
I am working on 7.o with SP SAPKW70010Hi Priya,
Delete entries for the data source in ROOSGEN, EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
Try activating the infosource again. This should solve your problem.
Sasi -
Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'
Hello,
I get the error message:
"Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
Many other transfer structures work fine, but this one is really problematic.
Has anyone seen it before? What do i do to solve it?
Regards,
F CHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Error ME006 when releasing Service entry Sheet in ML81N
Dear Gurus,
There is a Pop up error message, when service entry sheet is release and saved (Error ME006 when releasing Service entry Sheet in ML81N ). BUt after ingnoring, the service entry sheet is released. Please advice what is the issue with this error ME006 Message
One more confiq - in SM31 >> T100 (Table) >> ME (message class) >>> Message number 006 - Self explantatory is ticked.
Thanks
RS
Edited by: Ramapuram Saravanan on Jan 20, 2009 10:39 AMPlease check the lock entries in the Transaction code SM12,there must be one lock entry for this.
Please delete it.
Regards,
Manish
Maybe you are looking for
-
Column level access in Crystal Report Server
<p>Hi,</p><p>I have three fields in my Crystal Report. The crystal report will be exported to PDF by my customised web application. The application has a built in user security and access control model. However if user 1 logs in he should see all the
-
Hi All, I have my project souce with adding System.out.println statement and bundle it into jar file. When i running junit test . I cant see project source's println statement. Any properties file need to be modify to see println statement? Thanks, N
-
Oracle Database 10.2.0.1.0 setup for Microsoft Windows not opening
I've downloaded the Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows in my PC. However when I double click the setup.exe,it doensn't open up.Nothing is happening..Could someone provide me thoughts about what could be the reason and ho
-
Hello. New to iPhone, veteran of Windows. In studying the phone and manual, i cannot find a way to upload files to the iPhone and then manage those in some sort of folder heirarchy. For instance, PDF files, or text files, or spreadsheets. Is there a
-
JavaScript Calendar Popup 2.0 with Netscape 6.2
The JavaScript Calendar Popup 2.0 doesn't work with netscape 6.2. Once u press any button on the popup, it goes in infinite loop. Anybody knows solution to that.