Error promoting reports using LCM: The kind 'Note' does not exist

Hi,
We are using BOXI3.1 with FixPack1.3 installed on a Windows 2003 Enterprise environment. We have installed Life Cycle Management for version management and content promotion. Our environment coneist of three server installations (Development, Test and Production).
Our problem is that we are not able to promote reports from one environment to another. Wee are getting two different kind of errors, depending on the scenario:
Error 1: For actual promotion
Commit Status=Commit attempted and failed, Promotion Status=Failure : com.businessobjects.lcm.utilities.LCMException: com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'Note' does not exist in the CMS. (FWM 04030)
Error 2: For test promotion
Commit Status=Commit attempted and failed, Promotion Status=Failure : com.businessobjects.lcm.utilities.LCMException: com.businessobjects.sdk.biar.exception.XSDException$ImportParsingException: Import file parsing exception occurred : 'Item 'ALLOW_DISCUSSION_THREADS' does not exist in enumeration 'Note_RightEnum'. (FWM 04016)' (FWM 04009) cause:com.businessobjects.sdk.biar.exception.XSDException$InvalidEnumItemException: Item 'ALLOW_DISCUSSION_THREADS' does not exist in enumeration 'Note_RightEnum'. (FWM 04016) detail:Import file parsing exception occurred : 'Item 'ALLOW_DISCUSSION_THREADS' does not exist in enumeration 'Note_RightEnum'. (FWM 04016)' (FWM 04009) Item 'ALLOW_DISCUSSION_THREADS' does not exist in enumeration 'Note_RightEnum'. (FWM 04016)
This error happens for borth the Administrator user, and a user who are a member of the Administrator user group.
We have tested following:
1. Verify the user has at least view right for Custom Access Levels in CMC
2. Verify the user has the 'Allow discussion thread' on the Note content on Top Level security in 'Folder' in CMC.
3. We are getting the same error when exporting to BIAR
4. The user have Full control of the LCM folder
5. We have tested promotion with security option enabled
We have also a test report where we have set Full Control and allow discussion thread explicit on the user.
Have anyone experienced the same error and a suggestion for what can be wrong?
Jøran
Edited by: Jøran Kleiven on Feb 24, 2010 3:22 PM

Hi,
Could you tell me which table this object are in? I tried ci_infoobjects and ci_systemobjects, but it returned null.
Jøran

Similar Messages

  • The kind infoobject does not exist in the CMS

    hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
    the kind infoobject does not exist in the CMS
    the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
    then i found some error explanation
    Cause
    The InfoObject type does not exist in the CMS
    Action
    Ensure that the InfoObject type is propertly installed.
    and
    Cause
    An InfoObject type is missing.
    Action
    Ensure that the XSD for this type of InfoObject is installed.
    I want to know how to reinstall the infoObject type.
    or any other idear on this.
    thanks all.
    Ada

    WHat's the exact version of the source and the target BO system?
    Regards,
    Sratos

  • LifeCycle Manager: The kind 'Note' does not exist in the CMS

    Hi there,
    I'm trying to promote a Crystal Report from one relatively fresh XI 3.1 environment to another fresh XI 3.1 environment (TEST to PROD) using LifeCycle Manager, and for this report, which has no dependencies, I get the following error when I do a Test Promote or actual Promote:
    Commit Status=Commit attempted and failed, Promotion Status=Failure : com.businessobjects.lcm.utilities.LCMException: com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'Note' does not exist in the CMS. (FWM 04030)
    Has anyone encountered anything similar to this? I can't find any InfoObject that logically relates to the type/kind 'Note'. Perhaps it has to do with discussions?
    Thanks,
    Allan

    Hi,
    Can you try promoting it with the security option enabled.
    Based on the error condition it seems that the discussion plugin does not exist in the destination system.

  • Visual studio 2012 the name "initializeControl" does not exist in the namespace in visual WebPart

    Hi All,
    I'm trying to create a visual webpart in SharePoint 2013 using Visual Studio 2012 and I am seeing that the file ascx.g.cs
    is missing and i have this error in file ascx.cs : the name "initializeControl" does not exist in the namespace.
    And like i said i use VS2012 Ultimate
    Can anyone Help me please!!!
    thanks.

    In most scenarios this is caused by some error in code preventing Visual Studio from generating the designer file. You could try to undo the latest changes and see whether the item is being generated or not. Additionally you could try checking if the custom
    tool is still associated with the Visual Web Part SPI in the Properties Window.
    w: http://blog.mastykarz.nl | t:
    @waldekm | c: http://mavention.codeplex.com | c:
    http://mavention.nl

  • When i attempt to sync my iPhone contacts to my iMac, the info button does not appear in iTunes

    When I attempt to sync my iPhone contacts to my iMac using iTunes, the "info" button does not appear.  Any ideas on what I can do?

    Sync your contacts (and calendars) using iCloud.
    Sync Services has been removed in Mavericks.

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • Error while importing Web Analysis reports using LCM in 11.1.2.1

    Hi,
    I am trying to import Web Analysis reports using LCM in 11.1.2.1. But while importing the reoprts I am getting the following error:
    " The following object couldn't be imported:EPMRAF-31040:Provisioned user couldn't be found in target system."
    FYI: Security is already imported successfully in the target system. Including reporting and analysis.
    Please help.
    Edited by: 937719 on Feb 21, 2013 1:30 PM

    Are the child forms that are included in the composite form imported into the destination environment?
    HTH-
    Jasmine.

  • I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on all my tunes and each one I select ends up with a "?"

    I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on each tune I select and a "?" appears beside the song.  Does this sound familiar to anyone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • DB Connector Error : the license key does not include use of OpenSQL driver

    Hello,
    I am new developer on Crystal Report tool and i face an issue : When I try to refresh data I get the following error message :
    DB Connector Error : the license key does not include use of OpenSQL driver.
    Does someone know how to get the correct license key ?
    Many thanks for your help!
    Regards,
    Christiane

    Hi Christiane,
    What version of Crystal Reports are you using?
    Who owns the OpenSQL driver?
    Thank you
    Don

  • Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns.:

    Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns as following.
    Database query from: AdventureWorks2014
    System.Web.Services.Protocols.SoapException: The permissions granted to user 'SQLServer2014\Mubs' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to
    user 'mujb-HP\mujb' are insufficient for performing this operation.
       at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
       at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
    The permissions granted to user 'mujb-HP\mujb' are insufficient for performing this operation.
    Is there anybody help me out, pl
    My MSSQL Server express 2014 edition x64  and My desktop "Report Builder (RB) 3.0' is 32bit (x86).
    Does Report Builder x64 exist? I didn't see anywhere so I downloaded x86 RB

    Hi mujb,
    Per my understanding you are using the report builder 3.0 to design the report and when you click the query designer button to execute the query you got the error message above, right?
    I have tested on my local envornment and your issue can be caused by the user "SQLServer2014\Mubs"  and "mujb-HP\mujb"  haven't grant permission to the report server or the shared dataeource/dataset if you have used this.
    I would like to confirm if you have assigned both the Item-Level and System-Level role of the user above to sucessfully access the report server, If you haven't grant any access to the above user and when you connect to the report server in the report builder,
    you may got the error message:
    More details information below for your reference:
    Please execute the query in the microsoft SQL Server Management Studio to see if you have permission to execute the query.
    If the query works fine in step1, please run the report builder as Administrator and if you are using the shared datasource/dataset the issue can be cause by the you haven't grant access the share datasource, Double click to open the Datasource
    and click the "Test Connection" as below to test if it can connect successfully:
    If the "Test Connection" failed, please click the shared datasource/dataset on Report Server to check if you have grant correct permission.
    Related information about the grant permission to report server for your reference:
    https://msdn.microsoft.com/en-us/library/ms156034.aspx
    http://www.allenkinsel.com/archive/2013/01/adventures-in-ssrs/
    If your issue still exists, please try to provide more details information.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Some of the songs I have downloaded onto i tunes won't play when I select it to do so.  The error message I get is "The song could not be used because the original file could not be found.  Would you like to locate it?"  How can I get my songs to play?

    Some of the songs I have downloaded into i tunes won't play when I select it to do so.  The error message I get is "The song can not be used because the original file can not be found.  Would you like to locate it?"  When I select yes I'm sent to a screen that has my i tunes library listed.  When I select the song in question I'm asked if I would like to open the song.  When I select this option I get nothing.  The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to.  I can't the songs to play however.  This is not true of all of my songs but it is true of quite a few of them.  Actually, one song is too many.    How do I get my music to play that seems to be locked up somewhere in the computer?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

    Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years).  I plugged it into my pc, it was recognized and the software updated.  I created a new playlist and tied to sync the ipod.  This ipod had never been used on this pc/itunes since the pc is only 2 years old.  When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing.  I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs).  When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them.  Only my recent purchases from itunes do not.  When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found."  How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!?  I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again. 
    Any help is greatly appreciated.

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Error message when trying to play music on computer states The song ... could not be used because the original file could not be found.  However, my library shows how many items and the GBs used.  How do I locate the files?

    When I try to play my iTunes music on my computer, an error message comes up and state "The song (title of song) could not be used because the original file could not be found.  Would you like to locate it?
    When I click on Locate It, I cannot find where the music file may be located.  Does anyone have any suggestions?
    This all occurred when I attempted to do a backup to an external hard drive.  Unbeknownest to me, the files did not copy over and do not appear on the external hard drive. 
    When I open my iTunes library, at the bottom of my music list it shows how many songs and the GBs, so it appears that the files are still there; however, cannot be located.
    Thank you.

    Hi angela dfromtx,
    When tracks in iTunes display a it means the file cannot be located; it may have been moved or deleted. You'll have to locate the file manually if it is still available. For more information refer to the following article:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Alternatively, if your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

Maybe you are looking for