Error:Provide Host List - SSH User equivalence is not set up on the remote

Hello,
I've been receiving an error from OEM 10g GC when I attempt to execute a fresh install of the Agent:
"1. Provide Host List - SSH User equivalence is not set up on the remote nodes."
I'm using OEM Grid Control version 10.1.0.4 on a Solaris 10 platform. The agent will be installed on many 8i (post-8.1.7.4), 9i, and 10g clients.
I've tried most, if not all, of the standard fixes that I've found online (such as Metalink note 376355.1).
Has anybody had difficulties with this error, and what other fixes could I try besides the one in note 376355.1? Could this be an OS configuration issue, or something else?
Thanks.

How are you pushing the agent from 10104. This feature is not there in 10104
this is supported from 10201
http://www.oracle.com/technology/products/oem/pdf/10gr2_agent_deploy_bp.pdf

Similar Messages

SSH User equivalence is not set up on the remote nodes

I'm getting the above message when trying to push deploy a Linux agent 10.2.0.2 from an OEM.
I have run the sshUserSetupNT.sh succesfully - I believe there were no error messages being returned.
I can cygwin ssh to connect successfully to the linux box and issue commands without providing a password.
- and I've run the failing command from the log below successfully from a command prompt. (changed it to run date)
C:/cygwin/bin/ssh.exe -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -l oraoem centos5 /bin/sh -c '/bin/date '
I appears to be complaining about an RSA key - but how can that be when I can connect from a command prompt succesfully.
Any suggestions!
snip from deployment logfile
=======================================================================
Performing check for CheckSSHEquivalence
Does SSH equivalence exist with the remote nodes
Setting username to oraoem
Setting FallbackToRSH to false
Setting REMOTE_PATH_PROPERTIES_LOC to D:\OracleHomes\oms10g\/sysman/agent_download/10.2.0.2.0/linux/agentdeploy
C:\WINDOWS\system32\ping.exe#centos5#-n#5#-w#5000
C:\WINDOWS\system32\ping.exe centos5 -n 5 -w 5000
Exitcode of the remote command [rnode centos5]: 0
Errstream [rnode centos5]:
CommandResult status [rnode centos5]: true
C:/cygwin/bin/ssh.exe#-o#FallBackToRsh=no#-o#PasswordAuthentication=no#-o#StrictHostKeyChecking=yes#-l#oraoem#centos5#/bin/sh#-c#'/bin/true '
C:/cygwin/bin/ssh.exe -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -l oraoem centos5 /bin/sh -c '/bin/true '
Exitcode of the remote command [rnode centos5]: 255
Errstream [rnode centos5]: No RSA host key is known for centos5 and you have requested strict checking.
Host key verification failed.
CommandResult status [rnode centos5]: false
Expected result: centos5
Actual Result: Problem: 'PROV-16018: The command C:/cygwin/bin/ssh.exe failed.'
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: SSH equivalence check has failed
Recommendation: Setup SSH equivalence with the remote hosts and retry

Reboot the box and try again.

User mapping is not set correctly..!

Dear Guru,
I am working with portal 6.0 SP9, and when I try of create user, the application return "Could not create user" and I am use the user j2ee_admin. This user have admin role
I think that the user mapping is not set correctly or the permission is not correct.
The questions is: How can I user mapping set correctly?
Thanks
Dy

Hi Dayana,
Maybe the user name is shorter than 5 characters?
Yoav

Enabling SSH user equivalence resets umask to 0077

Hi,
I'm about to install Oracle 10g RAC on Red Hat Linux AS/ES 40 update 2. While configuring Secure Shell I noticed that after I enabled SSH user equivalence, umask gets changed from 022 to 077. Guess I could change umask to 022 before installing the software but is this supposed to happen?
Thanks,

I noticed umask had changed to 077 when I enabled user equivalence to log into a remote server without having to enter a password.
$ umask
0022
$ /usr/bin/ssh-agent $SHELL
$ /usr/bin/ssh-add
Enter passphrase for /home/oracle/.ssh/id_rsa:
Identity added: /home/oracle/.ssh/id_rsa (/home/oracle/.ssh/id_rsa)
Identity added: /home/oracle/.ssh/id_dsa (/home/oracle/.ssh/id_dsa)
$ umask
0077

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

Admin Server satrtup failing with the error User weblogic is not permitted to boot the server

Hi ,
The admin server is not coming up , its failing with the below error.
<May 25, 2014 10:28:35 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace.
I have tried resetting the password as per below link , it hasn't helped. Still facing issue. Please help
http://www.weblogic-tips.com/wls-security/
Thanks,
Pradeep

Creating New user did not help . Still same error.
<May 26, 2014 8:56:31 PM PDT> <Critical> <Security> <BEA-090404> <User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<May 26, 2014 8:56:31 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
>
<May 26, 2014 8:56:31 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>"

List of users who do not have USER GROUP.

Hi friends,
I want to find out the list of users who do not have USER GROUP.
Can any one please let me know how to find out.
Thanks,
Ankitha

Hi,
use the transaction "suim" or the abap report "RSUSR002"
-> user information system
open tree -> user -> users by compley.... -> exec. users by complex...
next screen -> Group for authorization -> select multiple selection (right symb.) -> in the tab 'single vals' -> click on the left symb. -> select '='
leave the fields blank. -> 'F8' or ok. -> then in the main screen 'F8' or run.
so you will get all users without a group asignment
I hope it was helpfully.
best regards
Cahit

Query to retrieve list of users who do not have a resource provisioned

I am trying to get a list of user who do not have a particular resource provisioned. I cannot seem to find a table that links the resource object information and User information. I need to generate a CSV file. Has anyone done this before or have any ideas. If so any information would be very helpful.
Thanks

select * from usr where usr.usr_key not in (
select usr.usr_key from oiu, usr, obi, obj, ost
where oiu.usr_key=usr.usr_key
and oiu.obi_key=obi.obi_key
and obi.obj_key=obj.obj_key
and obj.obj_name = :obj_name
and oiu.ost_key=ost.ost_key
and ost.ost_status not in ('Revoked'))
-Kevin

User weblogic is not permitted to boot the server

Hi,
I am new to OES and after running the configtool, creating the ASIAuthorizationProvider and ASIRoleMapperProvider (both has Defaul Identity Directory: wls_dir and Application Deployment Parent: //app/policy/wls_app), binding the SSM, i get this error when starting the WLS admin server:
15:33:26.312 EVENT Starting Jetty/4.2.25
15:33:26.859 WARN!! Delete existing temp dir C:\BEA_HOME_10\ales32-ssm\wls-ssm\i
nstance\wls_ssm\work\jar_temp\Jetty__8000__ for WebApplicationContext[/,jar:file
:/C:/BEA_HOME_10/ales32-ssm/wls-ssm/webapp/arme.war!/]
15:33:30.515 EVENT Started WebApplicationContext[,ARMEService]
15:33:32.562 EVENT Started SocketListener on 0.0.0.0:8000
15:33:32.562 EVENT Started org.mortbay.jetty.Server@176bf9e
ARME is started now
<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm wls.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <BEA-090404> <User weblogic i
s not permitted to boot the server; The server policy may have changed in such a
way that the user is no longer able to boot the server.Reboot the server with t
he administrative user account or contact the system administrator to update the
server policy definitions.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <BEA-000386> <Server su
bsystem failed. Reason: weblogic.security.SecurityInitializationException: User
weblogic is not permitted to boot the server; The server policy may have changed
in such a way that the user is no longer able to boot the server.Reboot the ser
ver with the administrative user account or contact the system administrator to
update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitte
d to boot the server; The server policy may have changed in such a way that the
user is no longer able to boot the server.Reboot the server with the administrat
ive user account or contact the system administrator to update the server policy
definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
ource)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
from the WLS AdminServer.log:
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000436> <Allocating 3 reader threads.>
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000446> <Native IO Enabled.>
####<Mar 5, 2010 3:33:06 PM SGT> <Info> <IIOP> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774386531> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 5, 2010 3:33:11 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774391656> <BEA-000000> <Starting OpenJPA 1.0.0.1>
####<Mar 5, 2010 3:33:17 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774397171> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413421> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413500> <BEA-090663> <The DeployableRoleMapper "com.bea.security.providers.authorization.asi.RoleProviderStub" implements the deprecated DeployableRoleProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413531> <BEA-090662> <The DeployableAuthorizer "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" implements the deprecated DeployableAuthorizationProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm wls.>
####<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090082> <Security initializing using security realm wls.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774414234> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414234> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FAILED>
####<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Mar 5, 2010 3:33:34 PM SGT> <Info> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414359> <BEA-000236> <Stopping execute threads.>
also, i just noticed that when staring OES admin server i get the following from the logs:
system_console.log:
2010-03-05 15:19:04,218 [JettySSLListener1-1] ERROR com.wles.soap.BLM.BlmBindingImpl - getUndistributedAttributeChanges has not been implemented properly.
2010-03-05 15:27:17,656 [Thread-31] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
     javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme group '//bind/wls' error report, policyno = 52:
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme 'asi.null.ARME.wls_ssm.asi.SGBLM010':
2010-03-05 15:27:33,015 [Thread-32] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:33,015 [Thread-32] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
     javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
WLESWebLogic.wrapper.log:
INFO | jvm 1 | 2010/03/05 15:27:17 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:17 | Re-throwing the fault...
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: Client has closed the connection, error not reported to client.
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: The exception is: com.bea.wles.management.console.utils.NestedJspException: Connection reset by peer: socket write error
INFO | jvm 1 | 2010/03/05 15:27:33 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:33 | Re-throwing the fault...
although, it seems that the OES admin server is up since i am able to access the OES admin console.
i have tried playing around the policies to grant the "weblogic" the priviliges for an Admin but is still get the same issue. Although, when i try to distribute the changes in the policy, "ASI ( Policy for entire Oracle Entitlements Server system ) " still appears in the list of changes.
any thoughts on what the problem is? is there a way to force the distribution of the policy? maybe through the command prompt or other console?
Edited by: user9056644 on Mar 5, 2010 12:02 AM

Have you applied CP2 or CP3 to OES? There were enhancements that allows these policies to be scoped within an organization. I only ask to help guide you on distributing policies for the runtime WLS domain. The ASI domain is only for the admin. There should have been a set of resources and policies created as a result of running ConfigTool for your new instance (looks like you named it 'wls'). If no CP, it will be in DefaultApp next to ASI.
You have to distribute policies for 'wls' immediately following running ConfigTool before starting WebLogic or you will put it into a state where it can't be started. The corrective action is to remove the state.ck file under C:\BEA_HOME_10/ales32-ssm/wls-ssm/instance/wls_ssm/work/runtime, distribute policies, restart WebLogic.
If you need to re-run ConfigTool (after installing CP for instance), revert the following files:
<domain>/config/config.xml
<domain>/bin/startWebLogic.sh | .cmd
Revert from the no-ales backups created. Remove the instance folder under C:\BEA_HOME_10\ales32-ssm/wls-ssm/instance. You can then re-run ConfigTool if you have to.

TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

Hi All,
We have snapshot replication . Job is failing in between due to below error.
Error messages:
The process could not connect to Subscriber 'XX:SD'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084)
Get help: http://help/MSSQL_REPL20084
TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
Login timeout expired (Source: MSSQLServer, Error number: HYT00)
Get help: http://help/HYT00
Please suggest

Hi Khushi，
According to your description, your snapshot replication job fails and you come across the error related to TCP Provider. Based on my research, the issue could occur as the following two situations.
1. OS runs out of memory for TCP buffers. When people use the two switch: the /PAE switch in the c:\boot.ini file and the /3gb switch in the boot.ini file. If the applications require many OS resources, such as by opening many TCP connections, this can cause
the OS to run out of memory for resources like TCP buffers.
2.OS runs out of available TCP “ephemeral” ports. When the client machine is opening many TCP connections and is running Windows Server 2003, Windows XP, or any earlier version of Windows, it may run out of TCP “ephemeral” ports.
To work around the issue, please follow the two solutions as below.
1.Remove the /3gb switch from c:\boot.ini. The root problem in this case is memory pressure on the OS, so removing the /3gb switch will give more memory to the OS and will alleviate this problem.
2.Make more ephemeral ports available following the steps in the article:
http://support.microsoft.com/kb/196271
For more information about the process, please refer to the article:
http://blogs.msdn.com/b/sql_protocols/archive/2009/03/09/understanding-the-error-an-operation-on-a-socket-could-not-be-performed-because-the-system-lacked-sufficient-buffer-space-or-because-a-queue-was-full.aspx
Regards,
Michelle Li

SHAREid - A local user session could not be created for the assertion

Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
I verified that the user exist in the directory and I am able to execute a test successfully as that user.
Thanks.

There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
Here is the AttributeStatement.
<saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
Thanks,
Vinay
Edited by: user504421 on Jul 9, 2009 2:17 PM

The user admin is not authorized to make the Create Order request

Hi,
I have deployed the PiP and trying to create the order. But i am getting the below error
The user admin is not authorized to make the Create Order request>
Please note :--
I have assigned roles in administrator
I have assigned permissions in Weblogic.
Thanks

Hi,
Click on the user admin under user and groups , go to the tab Passwords. Give the password for the admin user and save it. Restart the server and try to login.
Regards
Marg

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Xterm: Xt error: Can't open display: xterm: DISPLAY is not set

Hello, I am completely new to networking/systems. I have been asked to complete an open flow tutorial ( http://www.openflow.org/wk/index.php/OpenFlow_Tutorial ) I have fininshed a part of the tutorial and when i used "ssh -X [email protected]**.*", I was able to log in successfully but when i type in Xterm, it says "xterm: Xt error: Can't open display: xterm: DISPLAY is not set". I have downloaded virtual box, XQuartz and an ovf file as given in teh tutorial. I don't know what the problem is. Can someone please guide me through this? Thank you so much!

I didn't quite understand what you were saying but when i typed "ssh -Y ..." this is what happened:
mobile-172-16-103-167:~ mininet$ ssh -Y [email protected]
Password:
Last login: Sat May 18 20:25:50 2013 from 192.168.56.1
mobile-172-16-103-167:~ mininet$
ssh -X and ssh -Y do essentially the same thing. -Y is just less restrictive on X11 return traffic authority (basically it tells the local X11 display server that you trust the remote system sending X11 traffic to it).
Now what you are display seems strange. You prompt implies that your current system's IP address is 172.16.103.167 and you are ssh'ing to 192.168.56.1. You get a password prompt as expected, but then the "Last Login" messages says you are coming from 192.168.56.1, which is should be where you are coming, but that it the address you are trying to ssh to. And then to top it off, you command line prompt has not changed.
So I'm wondering if 192.168.56.1 is the same system you are currently using, but just a different account on that system?
Is this true?
Also your prompt implies you were logged into the 'mininet' account when you issued the ssh -Y command to login to the 'mininet' account on 192.168.56.1.
Or is it possible that you are loosing track of which system and account you are current remotely logged into?

BizTalk 2010 Error consuming WCF service metadata. Object reference not set to an instance of an object.

"Error consuming WCF service metadata.
Object reference not set to an instance of an object."
I have no clue what happen to my BizTalk. I checked all the below forum but m clueless why BTS not consuming WCF through Generated Items. I tried both metadata exhange endpoint and metadata file through
svcutil. but all my wcf services are working fine with .net C# client.
http://blogs.msdn.com/b/appfabriccat/archive/2010/11/23/how-using-duplex-mep-to-communicate-with-biztalk-from-a-net-application-or-a-wf-workflow-running-inside-appfabric-part-1.aspx
http://msdn.microsoft.com/en-us/library/bb226552.aspx
http://msdn.microsoft.com/en-us/library/bb798122.aspx
http://masteringbiztalkserver.wordpress.com/tag/wcf-service-consuming-wizard/
I reinstall the WCF lob Adapter SDK to my BizTalk VM but still no clue. no erros in event viewer nothing.
http://www.abdulazizfarooqi.wordpress.com Abdul Aziz Farooqi [BizTalk & SharePoint Consultant] MCPD Web & MCPD SharePoint 2010

Thanks from me too Neal - this worked from me. I wan't able to consume directly from exchange because the certificate is broken. However, I was able to convince Google Chrome to let me view the /Services.wsdl and from there I could save the .wsdl and two
.xsd files. In my case the problem lay at the top of the .wsdl file. I changed the following:
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema>
by giving the same targetNamespace as assigned in the <wsdl:definitions element, so I ended up with
<wsdl:types>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://schemas.microsoft.com/exchange/services/2006/messages">
<xs:import namespace="http://schemas.microsoft.com/exchange/services/2006/messages" schemaLocation="messages.xsd"/>
</xs:schema>

Error:Provide Host List - SSH User equivalence is not set up on the remote

Similar Messages

Maybe you are looking for