Error PRVF-5150 encountered while installing GI 11.2.0.3 on AIX 6.1 server

I am building a RAC cluster on IBM pSeries hardware running AIX 6.1. The ASM LUNs for storing the vote disk and OCR (as well as all future db files) are on NetApp storage. I have built RAC clusters before, using IBM storage, but this is my first time with NetApp storage.
I ran cluvfy for stage precrsinst, and that report came back without errors. But I don't believe that cluvfy actually attempts to access the ASM storage, since the utility does not know the ASM disk discovery path. Anyway...
During the OUI installation pre-checks, I received this error message: PRVF-5150 Path /dev/usasdirvg801_asm_quo_01 is not a valid path on all nodes.
Inital searches on MOS led me to note 1267569.1, but that applies only to Linux.
Has anyone else encountered this error message while installing Grid Infrastructure on AIX? Any and all advice will be considered and is appreciated.
Thank you!
Mark

Hi,
Try use kfod utility:
Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
/stage/grid/stage/ext/bin/kfod
Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
And put here :
$ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

Similar Messages

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

Errors encountered while installing EBS 11.5.10.35 on Windows XP Pro

I have been trying to install 11i on my desktop running Windows XP Pro SP2 follwoing another thread by naveed27c. I can pass all the pre-installation check but the same error messages always come up when I reach step 2 of 5. The short version of the error message is like this:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
There are more in the log but it is too long and I hate to copy all of them here.
I don't know what causes the problem. Within the preparation process there are a few steps where I am not sure that I have done correctly. I guess one or all of them could cause troubles.
1. In his thread, naveed27c mentioned the need to "opt for Register Environment Variables while installing VC++", but I don't see such an option while installing the package.
2. When setting path to include c:\cygwin\bin, I can add it and see it using echo %path%. But once I close the command window and reopen it, echo %path% does not return c:\cygwin\bin anymore. Also, I can't find c:\v98\bin, but c:\v98\vc\bin. Shall I add c:\v98\vc\bin to be included in PATH?
3. My hosts file is like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I added "oraclef.com" as the Primary DNS Suffix at both places (Computer Name and Network Connections. I can ping both "ben.oracle.com" and "ben".
Are the above settings correct?
4. When installing 11i, I entered the following in Express Configuration Information screen:
MKS directory=c:\cygwin\bin
MSDEV directory="c:\v98" (Here, shall I put "c:\v98\vc\bin"?)
Domain=oraclef.com
I am the only user and administrator. Do I need to create extra users?
I do apologize for this lengthy message. But I am so desperate to install this software. I would GREATLY appreciate your help.

Hi hsawwan,
I have added c:\cygwin\bin to the path following your instruction and can see it in a command window.
Tried to install 11i again just now but failed again. It is a clean system, I reitaled the OS. Got Microsoft Visual C++ 6 from Microsoft Visual Studio 6.0. While installing I chose to install VC++ only to c:\v98. Also installed Service Pack 6. After that I can see c:\v98\bin in the path.
Downloaded CYGWIN and installed the selected components to c:\cygwin. HOWEVER, I can not find the specified "diffutils".
In the 11i Express Configuration I filled the following:
MKS directory=c:\cygwin\bin
MSDEV directory=c:\v98
Domain=oraclef.com
I added "oraclef.com" as the DNS suffix. My hosts file looks like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I can ping both ben and ben.oraclef.com
Here are the error messages I got:
[b]There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS
There is no such global user or group: BEN\XXXX.
There is no such global user or group: XX.
More help is available by typing NET HELPMSG 3783.
c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS has succeeded
Step 1 of 5
Command: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd
Processing Step 2 of 5
Executing: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd APPS APPS
Where XXXX is my first name and XX stands for my last name. I am the only user and also the administrator of my desktop.
In addition, I got the following error:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
I apologize for bothering you again. Please give me some light on how to resolve these errors.

Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

Hi,
I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
ORA-12546: TNS: Permission Denied.
Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
Thanks in advance,
-Sandeep

I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
Check the support matrix and metalink and see if you can install a supported product such as 10.2.

Error in Database installation while installing CRM 4.0 on Linux

Hello,
We are installing CRM 4.0 on LINUX platform,
We have successfully installed the Central Instance, but while installing the database instance, when we start the OUI the installation starts and hangs at 0%
<b>installing java runtime environment    Link pending.......</b>
We have already installed the jre as per the SAP manual.
Also, the JAVA_HOME environment variables is also set to java/.../bin
As such there are no error logs for my problem,
Could you please suggest me some appropriate soln.

Hi Vasu,
ORA-4031... for 99% of cases this means one thing:
the database instance is not configured correctly.
To proceed, do the following:
1. get rid of init.ora (it's not used at all)
2. make sure that the init<sid>.ora file is really used.
   If there is a spfile in the %ORACLE_HOME&/database folder
   then this will be used.
3. With your configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
    Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
See note:
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
for more on this.
And when you're setting up parameters anyway, check note
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
KR Lars

Bluestacks displays an error with Graphics card while installing

My laptop is a DV6 6121tx with product number QB367PA#ACJ.
While installing bluestacks, it displayed an error stating not able to recognise the graphics card in the system.
Please suggest a safe update for the ame if available.
HP support assistant details of my graphics driver::
Radeon (TM) HD 6770M
8.882.2.3000 (30-09-2011)
This question was solved.
View Solution.

Hi champakBhumia,
Welcome to the HP forum!
Here is a link to the HP Pavilion dv6-6121tx Entertainment Notebook PC Product Specifications and HP Pavilion dv6 Notebook PC Maintenance and Service Guide ,which will provide a list recommended replacements parts.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

[WHLK] The error message pops up while installing WHLK build 10022/10031 on Server 2012

Hi all,
There is no error message on WHLK build #9926.
But the error message pops up on installing build 10022/10031.
Did you get the same problem while installing WHLK build 10022/10031?
Here is the s=installion step:
Launch "HLKSetup.exe" on Server 2012 -->The kit will ask the user th find "HLKSetup.exe" in download folder-->
Launch HLKSetup.exe" in download folder-->The error message pops up when the process bar goes to 38%
Error message
Problem signature:
Problem Event Name: APPCRASH
Application Name: Microsoft.Windows.Kits.Hardware.Setup.UpdateControllerDb.exe
Application Version: 10.0.10031.0
Application Timestamp: 54f420f2
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.2.9200.16384
Fault Module Timestamp: 5010ab2d
Exception Code: e0434352
Exception Offset: 00000000000189cc
OS Version: 6.2.9200.2.0.0.400.8
Locale ID: 1033
Additional Information 1: d522
Additional Information 2: d5228251694f130212c01ab1b52ad2a6
Additional Information 3: f9b9
Additional Information 4: f9b95021280f20538cd74ca111eba02c
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=190175
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

This is not the correct support channel for pre-release products, please follow-up with the channel in which you received this product for support or read the release notes for the product which will supply the correct steps to follow to avoid this situation.

Error in cloneDBCreation.log while installing Oracle 11g

Hi,
While installing Oracle 11g in a Virtual Machine environment , the following error is shown during database cloning :-
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size          1334380 bytes
Variable Size          163578772 bytes
Database Buffers     364904448 bytes
Redo Buffers          5844992 bytes
USERS
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:
Sample Schemas are being plugged in ...
ERROR:
ORA-12170: TNS:Connect timeout occurred
Please suggest a solution.
Thanks & REgards
Saswata Mandal.

we are doing a normal installation of Oracle 11g Enterprise edition in a virtual machine system.
During installing , the installer got stuck , while Cloning the database and showed the error.

Error PRVF-7565 received when installing Grid Infrastructure 12102 on OEL7/64bit

When installing GI on OEL7 I got this error PRVF-7565. Any clue?

Hi,
Try use kfod utility:
Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
/stage/grid/stage/ext/bin/kfod
Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
And put here :
$ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

Tiger installation fails-Error Message 'there areerrors while installing'

Hi there!
I have just bought a new Tiger 10.4 full version (4 cds) and tried to install CD1 but everytime, i pass the disk verifying of CD 1 , then when it installs on the HD, i get an error message saying 'there were some errors while installing to your hardrive' .... everytime i have to reboot on older version Mac OS 10.2.8
Any help highly appreciated! Thanks
Apple G4 IMAC Mac OS X (10.2.x) 60 gb

Two things to try before trying to install Tiger. One, boot the machine with the Apple Hardware Test disk and run the extended tests. If any problems pop up, then you'll have to fix those first. Once you get a clean bill of health on the hardware, boot with the Tiger install disk, select your language, and, when the menu bar pops up, select Disk Utility->your HD, and repair the disk. If that works, then try the upgrade again.
BTW, are you upgrading a 10.2.8 backup or are trying to do a clean install?

Problems encountered while installing designer 6i - RAU

Hi all,
While installing designer 6i on Windows XP with Oracle 9i DB, i am having a problem.
When the RAU views are created, one of the sql file has a view with a column as "CONSTRAINTS" and since its a reserved word, RAU exits showing application error.
Pls help me solve this.

I have the exact same problem. The repository install is trying to create a view that has a column named "CONSTRAINTS"...when the install reaches that point, it errors out saying that it cannot find the expected constraint definition. I have no idea how to fix this. I was thinking I would edit the script to change the column name, but anticipate this would cause further problems.

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

Please Help, Error Encountered while installing new drivers upd

Hi,
I've down loaded the new update driver for X-Fi and encountered the following error, while updating my X-Fi Pro sound card.
===============================
>SetupDLL\SetupDLL.cpp (298)
aAPP:Sound Blaster X-Fi Drivers Web Release
PVENDOR:Creative Technology Ltd.
=================================
Error Code -5002
) I've tried uninstalling my X-Fi pro and restalling it and still the error appear.
2) I've stopped all programs and still the error appeared on screen.
Any help is much appreciated.
Thanks,
Chris

Hi Jean
Pls find the details and the procedure we have tried with.
Pls let me know in case any other information is required.
The Versions we are using are as follows
DB : Oracle 9.2.0.3.0 on sun solaris
OWB Client : 9.0.4.10.0 (after applying patch:Patch 9.0.4.10.0)
OWB Repository : 9.0.4.0.27
Database is located on on sun solaris and we are trying install the target user from Windows Professional 2000.
The target schema user is created and assigned to default tablespace.
We are doing as per the instructions in the Runtime Assitance Wizard.
1. Initaited the Runtime assitant Wizard from my Windows machine.
2. Provided the required database information and sys user id and password.
3. Checked the option target Schema (As Runtime Repository, Access User and 3 to 4 target schemas are already available). We are trying to install anothor target schema.
4.Selected create a new warehousebuilder Target Schema
5. Provided the Runtime repository owner userid and password which was created long back.
6. Then selected install into an existing user schema and provided the userid and password of the new user which our dba has created using create user option(provided with minimal previleges like connect, resource etc).
7. Then we have selected the tablespaces from the drop down list available (where we have selected the default tablespaces that were assigned by our DBA)
8. After selecting the finish button after sometime it has thrown the error mensioned in my first Post.
9. The log details are also posted in my first post.
Thanks and Regards
Nanda Kishore

"Error Loading Operating System" while installing Win XP (P6N)??

I have two harddrives (320GB each) on my MSI P6N SLI with Vista installed on one HDD, and everytime I try to install XP on the other HDD I get this error message (when Win XP restarts after formatting). I tried formatting both HDDs and install XP first but same error shows up. Any help is appreciated. Both HDDs are Seagate SATAII.

First off, XP-SP2 doesn't come with every SATA controller driver on the disk. You might have to create an F6 driver disk for use in the text based installer section. I don't know with your specific mainboard though. I had to do this for my MSI P35 Platinum. Read the help files on your mainboard's driver CD and check out on the net for creating a F6 disk controller driver floppy. YOU DO HAVE A FLOPPY DRIVE???? If not, you might have to get one as XP won't read the drivers from a flash drive or CD/DVD drive. If you don't want to buy a floppy drive, your only option is called SLIPSTREAMING. That's where you make an image of the OS install disk and inject the drivers into it so that during the install process, the drivers are found and automatically installed. I use a wonderful freeware program called NLite to slipstream my personal/client loads.
Also, you'll want more than 16GB of space for your OS partitions. I suggest at least 20GB. Don't forget that unless you use tweakui to relocate your MY <Whatever> folders, they will be on the C: drive.
I suggest you put BOTH OS's on the same drive, just create different partitions for them. The standard for dual booting is to install the "older" OS first, then once that is working, install the newer OS's, then connect any "data" drives. This way when you decide on a single OS, you simply wipe one drive, not two. Going from a "two drive OS install" dual boot to a single OS isn't as easy as just pulling the OS drive you don't want. Both OS's require the drive the boot loader is on, which is the first drive. Also, the XP boot loader doesn't play nice with Vista so you need to install XP first, then Vista.
MAKE SURE you install your CHIPSET drivers before anything else. Both XP and Vista will have all sorts of weird issues if you don't install this first.
Then while in XP, put your Vista disk in and run the set up. It'll ask how you want to install it, chose in another location. It'll reboot and come up with the Vista installer. Now for your target, chose that non-partitioned space on the first drive (set a partial size of at least 20GB since Vista will CRAWL with less than 10% free drive space on the OS drive). Vista will install there and modify the FIRST partition's boot files by converting them to the Vista Boot Loader. Once the install is done, boot into Vista and install all the patches and drivers.
One of the nice things with a dualboot XP/Vista is that BOTH OS's will see themselves as C: when they are the active OS. The other OS will be D: However, your optical drive will be E: on both. I suggest you change this before connecting other HDD's (I use I:) so that the extra HDD's will be D:, E:, etc.
After you have your OS's working, connect the 2nd drive and format it under XP. Assign a drive letter there too and then make sure that under Vista you have the same drive letter.
This method is if you're going to share the same "data" drive for both OS's. If you want a game playable under both OS's, just install it under XP first, then under Vista. Make sure to change the destination under both OS's to the same place on the Data drive. Saves space as you don't have to have a single game installed at two different locations.
I use an 80GB drive split for XP and Vista. Then I use a 250GB drive for my games/media.

Getting Error while Installing Workflow Manager 1.0 on Sharepoint 2013 On-Prem server

I am trying to install Workflow Manager 1.0 on our SharePoint Server 2013 which is On-Prem installation. The SharePoint Server 2013 is functioning correctly. During the installation of Workflow Manager 1.0 on the same SharePoint 2013 server, I receive the
following message: "Port number 9355 specified for HTTPS Port is blocked" I have checked our firewall Inbound rules and this port is not blocked.
Any reason why this could be happening or did I miss anything?
Thanks Snehal H.Rana SharePoint Consultant

I am happy to inform you that I was able to resolve this error. I configured this on different ports other than 9355. We need to modify 2 files called "ClusterManifest.1.0.xml" and "ClusterManifest.current.xml" in c:\Program
Files\Windows Fabric\Bin. They were pointing to older FQDN under following node:
<NodeList>
<Node NodeName="yourserverfqdn" IPAddressOrFQDN="yourserverfqdn" IsSeedNode="true" NodeTypeRef="DefaultNodeType" />
</NodeList>
These files won't let you edit directly in notepad so you will need to make a copy of these files (just in case). Open up the notepad as "Run As Administrator". Drag these files to the notepad. After you are done editing, save these as original
names but make sure that the extension is .xml
You will also need to do IISReset
That did the trick for me.
Thanks Snehal H.Rana SharePoint Consultant

Error PRVF-5150 encountered while installing GI 11.2.0.3 on AIX 6.1 server

Similar Messages

Maybe you are looking for