Error PRVF-7565 received when installing Grid Infrastructure 12102 on OEL7/64bit

When installing GI on OEL7 I got this error PRVF-7565. Any clue?

Hi,
Try use kfod utility:
Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
/stage/grid/stage/ext/bin/kfod
Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
And put here :
$ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

Similar Messages

Error PRVF-5150 encountered while installing GI 11.2.0.3 on AIX 6.1 server

I am building a RAC cluster on IBM pSeries hardware running AIX 6.1. The ASM LUNs for storing the vote disk and OCR (as well as all future db files) are on NetApp storage. I have built RAC clusters before, using IBM storage, but this is my first time with NetApp storage.
I ran cluvfy for stage precrsinst, and that report came back without errors. But I don't believe that cluvfy actually attempts to access the ASM storage, since the utility does not know the ASM disk discovery path. Anyway...
During the OUI installation pre-checks, I received this error message: PRVF-5150 Path /dev/usasdirvg801_asm_quo_01 is not a valid path on all nodes.
Inital searches on MOS led me to note 1267569.1, but that applies only to Linux.
Has anyone else encountered this error message while installing Grid Infrastructure on AIX? Any and all advice will be considered and is appreciated.
Thank you!
Mark

Hi,
Try use kfod utility:
Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
/stage/grid/stage/ext/bin/kfod
Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
And put here :
$ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

Installing Grid Infrastructure 11gR2 on a 2nodes cluster: device names req.

Hello, I am trying to install Grid Infrastructure 11gR2 on 2 sun nodes (Solaris 10) in order to try the product. but I am finding an error on the second node. After installing the software on both nodes and executing root.sh in the first node, the second node is complaining about the device I have defined for OCR, voting and ASM (the easiest scenary, 1 diskgroup for OCR, voting and ASM with 1 disk ) :
DiskGroup conf_dg creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/dev/rdsk/c5t500601603CE02E8Ed20s0' matches no disks
I have realised this device has not the same name on both nodes as boxes are different; the device name in the second system is
c2t500601673CE02E8Ed20s0
This is slice 0 of and EMC Clariion LUN. As this info is recorded at the crsconfig_params file in both nodes and is the same, should the device names be the same on the N nodes of a Clusterware cluster? How should I do to correct the installation of the second node?
Thanks in advance.

Hi Gurus,
I have similar problems on very first node1, it cannot create the diskgroup when running the root.sh. here is my configuration
two guest ldoms running sol 10 update10 on sparc t5120 and sharing iscsi Luns provided by third ldom ( created zfs volumes and set shareiscsi on)
all the permissions are 777 on /dev/rdsk/c1t*d0s1 and ownership grid:oinstall.
using solaris.sparc64_11gR2_grid.zip
I have installed 11gr2 rac for x86 using similar configuration with all x86 machines. but I cannot install using sparc as mentioned above. I have put some logs here
much appreciated for you help.
Thanks.
[main] [ 2012-09-11 03:43:10.363 EDT ] [SQLEngine.doSQLSubstitution:2373] The substituted sql statement:=select count(*) from v$ASM_DISKGROUP where name=upper('crsdg')
[main] [ 2012-09-11 03:43:11.070 EDT ] [UsmcaLogger.logInfo:141] CREATE DISKGROUP SQL: CREATE DISKGROUP crsdg EXTERNAL REDUNDANCY DISK '/dev/rdsk/c1t12d0s1',
'/dev/rdsk/c1t8d0s1',
'/dev/rdsk/c1t6d0s1',
'/dev/rdsk/c1t9d0s1' ATTRIBUTE 'compatible.asm'='11.2.0.0.0'
[main] [ 2012-09-11 03:44:02.639 EDT ] [SQLEngine.done:2148] Done called
[main] [ 2012-09-11 03:44:02.645 EDT ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:createDiskGroups
[main] [ 2012-09-11 03:44:02.647 EDT ] [UsmcaLogger.logException:172] ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
[main] [ 2012-09-11 03:44:02.649 EDT ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1898)
oracle.sysman.assistants.usmca.backend.USMDiskGroupManager.createDiskGroups(USMDiskGroupManager.java:235)

Install grid infrastructure fails due to oracle net configuration a failure

hello guys,
I installed software only then tried to install grid infrastructure standalone server along with ASM then i got an error
[main] [ 2010-10-16 05:13:15.094 EET ] [RuntimeExec.runCommand:164] CRS-212: Resource 'ora.crsd' is not registered.
[main] [ 2010-10-16 05:13:15.095 EET ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-10-16 05:13:15.097 EET ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-10-16 05:13:15.104 EET ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /oracle/app/oracle
[main] [ 2010-10-16 05:13:15.284 EET ] [EndpointsImpl.<init>:276] Get listener endpoints from TCP:1521
[main] [ 2010-10-16 05:13:15.286 EET ] [EndpointsImpl.<init>:302] Token count is 1
[main] [ 2010-10-16 05:13:15.312 EET ] [EndpointsImpl.<init>:324] LsnrProtocol type = TCP, values = 1521
[main] [ 2010-10-16 05:13:15.318 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:86] Calling parseInt to check 1521
[main] [ 2010-10-16 05:13:15.319 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:97] Get port number 1521
[main] [ 2010-10-16 05:13:15.469 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:15.471 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:15.472 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:15.482 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:15.486 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:15.487 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:13:15.505 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:15.527 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:15.530 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:15.533 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:15.535 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:15.536 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:13:15.581 EET ] [HASContext.<init>:100] moduleInit = 67
[main] [ 2010-10-16 05:13:15.583 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-10-16 05:13:15.590 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-10-16 05:13:15.591 EET ] [Library.load:254] Loading library /oracle/app/oracle/product/11.2.0/grid/lib/libsrvmhas11.so
[main] [ 2010-10-16 05:13:15.967 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
[main] [ 2010-10-16 05:13:16.020 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
[main] [ 2010-10-16 05:13:16.099 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:16.101 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:16.102 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:16.103 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:16.108 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:16.109 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:16:25.268 EET ] [PortAvailableCommand.execute:198] Port 1521 is available on node primary.localdomain
[main] [ 2010-10-16 05:16:25.297 EET ] [NodeAppsFactoryImpl.checkPortHelper:1525] port=1521 availability status=true across nodeList=local node
[main] [ 2010-10-16 05:16:25.848 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
[main] [ 2010-10-16 05:16:25.861 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.028 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
[main] [ 2010-10-16 05:16:26.038 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.222 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
[main] [ 2010-10-16 05:16:26.231 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.246 EET ] [CRSNative.register:1133] About to register: name: ora.local_resource.type, type: 2, update: false, force: false
[main] [ 2010-10-16 05:16:26.384 EET ] [CRSNative.register:1141] Name: 'ALIAS_NAME', Value: ''
[main] [ 2010-10-16 05:16:26.413 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'local_resource'
[main] [ 2010-10-16 05:16:26.421 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Oracle Local Resource'
[main] [ 2010-10-16 05:16:26.427 EET ] [CRSNative.register:1141] Name: 'RESTART_ATTEMPTS', Value: '5'
[main] [ 2010-10-16 05:16:26.434 EET ] [CRSNative.register:1141] Name: 'UPTIME_THRESHOLD', Value: '1d'
[main] [ 2010-10-16 05:16:26.441 EET ] [CRSNative.register:1141] Name: 'AUTO_START', Value: 'restore'
[main] [ 2010-10-16 05:16:26.517 EET ] [CRSNative.register:1141] Name: 'ENABLED', Value: '1'
[main] [ 2010-10-16 05:16:26.531 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: ''
[main] [ 2010-10-16 05:16:26.544 EET ] [CRSNative.register:1141] Name: 'NLS_LANG', Value: ''
[main] [ 2010-10-16 05:16:26.552 EET ] [CRSNative.register:1141] Name: 'USR_ORA_ENV', Value: ''
[main] [ 2010-10-16 05:16:26.559 EET ] [CRSNative.register:1141] Name: 'START_DEPENDENCIES', Value: ''
[main] [ 2010-10-16 05:16:26.595 EET ] [CRSNative.register:1141] Name: 'STOP_DEPENDENCIES', Value: ''
[main] [ 2010-10-16 05:16:27.340 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute ENABLED to type STRING.
[main] [ 2010-10-16 05:16:27.357 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute RESTART_ATTEMPTS to type STRING.
[main] [ 2010-10-16 05:16:28.400 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
[main] [ 2010-10-16 05:16:28.419 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:28.431 EET ] [CRSNative.register:1133] About to register: name: ora.listener.type, type: 2, update: false, force: false
[main] [ 2010-10-16 05:16:28.440 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'ora.local_resource.type'
[main] [ 2010-10-16 05:16:28.448 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
[main] [ 2010-10-16 05:16:28.457 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
[main] [ 2010-10-16 05:16:28.486 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
[main] [ 2010-10-16 05:16:28.495 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
[main] [ 2010-10-16 05:16:28.505 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
[main] [ 2010-10-16 05:16:28.513 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
[main] [ 2010-10-16 05:16:28.568 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
[main] [ 2010-10-16 05:16:28.577 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
[main] [ 2010-10-16 05:16:28.713 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
[main] [ 2010-10-16 05:16:28.890 EET ] [CRSNativeResult.addLine:106] callback: ora.listener.type true CRS-2618: Cannot change data type INT of existing attribute START_TIMEOUT to type STRING.
[main] [ 2010-10-16 05:16:29.688 EET ] [Util.<init>:86] Util Instance created.
[main] [ 2010-10-16 05:16:29.816 EET ] [HASContext.getCRSHome:507] /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.821 EET ] [Util.getCRSHome:542] getCRSHome: ret=/oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.834 EET ] [ListenerImpl.getOracleHomeVal:1323] crshome is /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.839 EET ] [ListenerImpl.getOracleHomeVal:1324] oraclehome is /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.845 EET ] [ListenerImpl.create:534] Creating Resource
[main] [ 2010-10-16 05:16:30.290 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
[main] [ 2010-10-16 05:16:30.302 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
[main] [ 2010-10-16 05:16:30.313 EET ] [CRSNative.register:1133] About to register: name: ora.LISTENER.lsnr, type: 1, update: false, force: false
[main] [ 2010-10-16 05:16:30.321 EET ] [CRSNative.register:1141] Name: 'TYPE', Value: 'ora.listener.type'
[main] [ 2010-10-16 05:16:30.331 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
[main] [ 2010-10-16 05:16:30.338 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
[main] [ 2010-10-16 05:16:30.345 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
[main] [ 2010-10-16 05:16:30.353 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
[main] [ 2010-10-16 05:16:30.360 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
[main] [ 2010-10-16 05:16:30.466 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
[main] [ 2010-10-16 05:16:30.484 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
[main] [ 2010-10-16 05:16:30.516 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
[main] [ 2010-10-16 05:16:30.526 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
[main] [ 2010-10-16 05:16:30.538 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: '11.2.0.1.0'
[main] [ 2010-10-16 05:16:31.184 EET ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-10-16 05:16:31.195 EET ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-10-16 05:16:31.219 EET ] [ConfigureListener.isPortFree:1025] Local host IP address: primary.localdomain/192.168.1.80
[main] [ 2010-10-16 05:16:31.223 EET ] [ConfigureListener.isPortFree:1027] Local host name: primary.localdomain
[main] [ 2010-10-16 05:16:31.229 EET ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: primary.localdomain/192.168.1.80
[main] [ 2010-10-16 05:16:31.243 EET ] [ConfigureListener.isPortFree:1075] java.net.PlainSocketImpl.socketBind(Native Method)
java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
java.net.ServerSocket.bind(ServerSocket.java:319)
java.net.ServerSocket.<init>(ServerSocket.java:185)
oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1041)
oracle.net.ca.ConfigureListener.startOrStopListener(ConfigureListener.java:1118)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:256)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
*[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: false*
my firewall is offline so what prevents oracle from using that port i tried also to use another port but i am getting the same error.
Please advise.
Mohamed

Hi Mohammed,
[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: falseMake sure that no listener service is running on port 1521.
Its returning value false while checking free port for 1521.
Regards,
X A H E E R

Install grid infrastructure + ntp server

Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?
Thanks.

user12064507 wrote:
Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?Ask your network guys to tell you that if the IP is not is not in your LAN, to where it belongs. They are the best people to ask it.
Aman....

Install Grid Infrastructure

Try to install Grid Infrastructure (ASM) 11gR2 on SUSE Linux 11. Installation went through well untill the very last steps. The message indicated:
Configure Oracle Grid Infrastructure for Standalone Server -- failed
*Automatic Storage Management Configuration Assistant failed. --failed.*
What could be the solution?

The log does state: Successfully configured Oracle Grid Infrastructure for a Standalone Server
Then it moves on to configure 'Automatic Storage Management Configuration Assistant'
There it says:
Starting 'Automatic Storage Management Configuration Assistant'
Error while detecting Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure to configure ASM.
It sounds like that Oracle Grid Infrastructure for a Standalone Server was indeed successfully configured. However, for some reason the ASMCA could not find it.
Next, I did the following:
. oraenv
ORACLE_SID = [oracle] ? +ASM
ORACLE_HOME ...
asmca
The ASMCA GUI windows opened.
After I enter the required info, then click on Create ASM button, this is what it displyed:
Oracle Grid Infrastructure is not configured properly. ASMCA needs Oracle Grid Infrastructure to configure ASM.
What could be wrong?

What does error code 50 mean when installing the creative cloud app?

what does error code 50 mean when installing the creative cloud app?

Hello,
This thread may help
Error code 50
Let us know!
Regards,
Jo-Marie

TS3274 Error message 5000 received when trying to update ipad software

How do I resolve this error message 5000 received when trying to update ipad software from my computer?

iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Error 1920 or 1921 when installing iTunes 5 for Windows

Hello,
Can anyone help me in finding the complete article on how to solve the following error message: Error 1920 or 1921 when installing iTunes 5 for Windows. It was posted September 9, 2005.
I need the complete instructions on how to correct the following error: The Windows Management Instrumentation service isn't running on your computer.
Thanks!

hi Roberto!
gosh, haven't seen one of those for a while ...
are you trying to reinstall a 5.0.0.35? the
b Bonjour
version of the 1920/1921 didn't hit 5.0.1.4 installs. can you find a copy of a 5.0.1.4 installer from somewhere?
love, b

Creating ASM after installing grid infrastructure software only option

OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
Please tell me the suggestion if anyone knows........
Thanks & Regards
Ramesh M

Hi,
First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
So by configuring standalone server GI later, you will only have a local ASM installation.
However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
Hope that clarifies it.
Regards
Sebastian

OSStatus error -9459 message received when I tried to export slideshow

OSStatus error -9459 message received when I tried to export an iphoto slideshow to imovie or iDVD. how do I work around it or correct the problem

Yes, it let me create a project. The error came when I tried to save...not save as...also came when I went to build the DVD. It always saves before it begins to build and the same error message came up again. It is a very simple DVD...no menus....just a plug and play. It is a thearter performance that was shot and then edited in Pro and opening titles and credits added. The thought is that the DVD would be put into the player and the timeline begins to play from the opening titles to the end credits...nothing fancy......

Simplest way to resolve error of 'no-recovery' when installing ML?

Simplest way to resolve error of 'no-recovery' when installing ML?
Trying to Install ML and this error comes up about not having a recover system and won't let me install. Any easy fixes?

See the heading "What to do if the installer warns that no Recovery System can be created" in this support article.

System re-booted while installing grid infrastructure software(11 gr2)

Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans

Ansh wrote:
Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans
Hi,
Check if $GRID_HOME/cfgtoollogs/configToolAllCommands exist, if the file is there then as grid user execute the script
but to be safe and have clean installation I would deinstall it and re-run the installation
Cheers

Error in OMS configuration when Installing 10g Grid Control

Hi All,
I am installing Enterprise manager Grid control 10g for Rac. This is failing on OMS configuration.I check log file and found following error under OracleHomes/oms10g/sysman/log/emca_repos_drop12_29_46:
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bomlsr01)(PORT=1541)))(CONNECT_DATA=(SID=APPSUPG))): ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
As I am installing this on RAC I passed service name (DB name) value not SID.
Could anyone please tell where I am doing wrong?
Thanks
Sanjeev

OK, but when looking at the error message
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bomlsr01)(PORT=1541)))
(CONNECT_DATA=(SID=APPSUPG))): ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
(DBD ERROR: OCIServerAttach)
and comparing it with the result of the tnsping
(DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=bomlsr01.firstassist.org.uk)(PORT=1541)) (CONNECT_DATA= (SERVICE_NAME=APPSUPG)
(INSTANCE_NAME=RAC1)))
I see two differences:
=> SID=APPSUPG / SERVICE_NAME=APPSUPG
=> HOST=bomlsr01 / HOST=bomlsr01.firstassist.org.uk
The harder part now is to figure out what needs to be done to fix your issue. I would suggest to take a look at the documentation (installing
GC on RAC)

Install Grid Infrastructure 11GR2

Hi all,
I have just installed Oracle Grid Infrastructure 11GR2 without having all linux packages installed like UnixODBC and 2 others.
Do you thing is it a problem ?
Thanks.

No, I don't have error message. Just one at the end when Oracle check installation.
When i launch runcluvfy i have this problem :
[grid@rac1 grid]$ ./runcluvfy.sh stage -post crsinst -n rac1,rac2 -verbose
ExÃ©cution de post-vÃ©rifications pour configuration des services de cluster
VÃ©rification de l'accessibilitÃ© du noeud...
VÃ©rification : accessibilitÃ© du noeud "rac1"
Noeud de destination Accessible ?
rac2 oui
rac1 oui
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'accessibilitÃ© du noeud "rac1"
VÃ©rification de l'Ã©quivalence utilisateur...
VÃ©rification : Ã©quivalence de l'utilisateur "grid"
Nom de noeud Commentaire
rac2 rÃ©ussi
rac1 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'Ã©quivalence de l'utilisateur "grid"
VÃ©rification de la cohÃ©rence des fuseaux horaires...
SuccÃ¨s de la vÃ©rification de la cohÃ©rence des fuseaux horaires.
VÃ©rification de l'intÃ©gritÃ© du gestionnaire de clusters...
VÃ©rification du dÃ©mon CSS...
Nom de noeud Statut
rac2 en cours d'exÃ©cution
rac1 en cours d'exÃ©cution
Oracle Cluster Synchronization Services est en ligne.
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© du gestionnaire de clusters
La vÃ©rification des attributs Udev pour Emplacements d'OCR a dÃ©marrÃ©...
RÃ©sultat : VÃ©rification des attributs Udev rÃ©ussie pour Emplacements d'OCR
La vÃ©rification des attributs Udev pour Emplacements des disques "votants" a dÃ©marrÃ©...
RÃ©sultat : VÃ©rification des attributs Udev rÃ©ussie pour Emplacements des disques "votants"
VÃ©rifier le masque de crÃ©ation du fichier utilisateur par dÃ©faut
Nom de noeud Disponible Obligatoire Commentaire
rac2 0022 0022 rÃ©ussi
rac1 0022 0022 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification du masque de crÃ©ation du fichier utilisateur par dÃ©faut
VÃ©rification de l'intÃ©gritÃ© du cluster...
Nom de noeud
rac1
rac2
VÃ©rification de l'intÃ©gritÃ© du cluster rÃ©ussie
VÃ©rification de l'intÃ©gritÃ© d'OCR...
VÃ©rification de l'absence de configuration hors cluster...
Tous les noeuds sans configuration locale hors cluster
SuccÃ¨s de la vÃ©rification de l'exÃ©cution d'ASM. ASM est en cours d'exÃ©cution sur tous les noeuds de cluster
VÃ©rification du fichier de configuration OCR "/etc/oracle/ocr.loc"...
Fichier de configuration OCR "/etc/oracle/ocr.loc" vÃ©rifiÃ©
Le groupe de disques pour l'emplacement OCR "+DATA" est disponible sur tous les noeuds
VÃ©rification de la taille de l'emplacement OCR "+DATA"...
VÃ©rification de la taille pour l'emplacement OCR "+DATA" rÃ©ussie...
VÃ©rification de la taille pour l'emplacement OCR "+DATA" rÃ©ussie...
WARNING:
Cette vÃ©rification ne prend pas en compte l'intÃ©gritÃ© du contenu d'OCR. ExÃ©cutez 'ocrcheck' en tant qu'utilisateur disposant de privilÃ¨ges pour vÃ©rifier le contenu d'OCR.
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© d'OCR
VÃ©rification de l'intÃ©gritÃ© de CRS...
Le clusterware Oracle est en bon Ã©tat sur le noeud "rac2"
Le clusterware Oracle est en bon Ã©tat sur le noeud "rac1"
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© de CRS
VÃ©rification de l'existence de l'application de noeud...
VÃ©rification de l'existence de l'application de noeud VIP
Nom de noeud Obligatoire Statut Commentaire
rac2 oui en ligne rÃ©ussi
rac1 oui en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud ONS
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud GSD
Nom de noeud Obligatoire Statut Commentaire
rac2 non n'existe pas ignorÃ©
rac1 non n'existe pas ignorÃ©
RÃ©sultat : VÃ©rification ignorÃ©e.
VÃ©rification de l'existence de l'application de noeud EONS
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud NETWORK
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification du nom d'accÃ¨s du client unique (SCAN, Single Client Access Name)...
Nom d'adresse IP virtuelle SCAN Noeud En cours d'exÃ©cution ? ListenerName Port En cours d'exÃ©cution ?
rac-cluster-lpt-scan rac1 true LISTENER 1521 true
VÃ©rification de la configuration de la rÃ©solution de noms pour "rac-cluster-lpt-scan"...
ERROR:
PRVF-4664 : EntrÃ©es de rÃ©solution de noms incohÃ©rentes dÃ©tectÃ©es pour le nom SCAN "rac-cluster-lpt-scan"
Nom SCAN Adresse IP Statut Commentaire
rac-cluster-lpt-scan 10.176.1.181 en Ã©chec EntrÃ©e NIS
ERROR:
PRVF-4657 : Echec de la vÃ©rification de la configuration de la rÃ©solution de noms pour "rac-cluster-lpt-scan" (adresse IP : 10.176.1.181)
ERROR:
PRVF-4664 : EntrÃ©es de rÃ©solution de noms incohÃ©rentes dÃ©tectÃ©es pour le nom SCAN "rac-cluster-lpt-scan"
Echec de la vÃ©rification de la configuration de l'adresse IP virtuelle SCAN et du processus d'Ã©coute
OCR dÃ©tectÃ© sur ASM. ExÃ©cution de vÃ©rifications de l'intÃ©gritÃ© d'ACFS...
DÃ©marrage de la vÃ©rification pour contrÃ´ler si ASM est en cours d'exÃ©cution sur tous les noeuds de cluster...
SuccÃ¨s de la vÃ©rification de l'exÃ©cution d'ASM. ASM est en cours d'exÃ©cution sur tous les noeuds de cluster
DÃ©marrage de la vÃ©rification des groupes de disques pour contrÃ´ler si au moins un groupe de disques est configurÃ©...
SuccÃ¨s de la vÃ©rification des groupes de disques. Au moins un groupe de disques a Ã©tÃ© configurÃ©
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© d'ACFS de tÃ¢che
VÃ©rification de la configuration de disque "votant" de cluster Oracle...
SuccÃ¨s de la vÃ©rification de la configuration de disque "votant" de cluster Oracle
VÃ©rification de la non-appartenance de l'utilisateur "grid" au groupe "root"
Nom de noeud Statut Commentaire
rac2 n'existe pas rÃ©ussi
rac1 n'existe pas rÃ©ussi
RÃ©sultat : L'utilisateur "grid" ne fait pas partie du groupe "root". SuccÃ¨s de la vÃ©rification
VÃ©rification de l'installation du clusterware sur tous les noeuds...
SuccÃ¨s de la vÃ©rification de l'installation de clusterware
VÃ©rification de l'exÃ©cution de la ressource CTSS sur tous les noeuds...
VÃ©rification : ressource CTSS exÃ©cutÃ©e sur tous les noeuds
Nom de noeud Statut
rac2 rÃ©ussi
rac1 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification de la ressource CTSS
Interrogation de CTSS pour le dÃ©calage horaire sur tous les noeuds...
RÃ©sultat : SuccÃ¨s de l'interrogation de CTSS pour le dÃ©calage horaire
VÃ©rification de l'Ã©tat de CTSS dÃ©marrÃ©e...
VÃ©rification : Ã©tat de CTSS
Nom de noeud Etat
rac2 Observateur
rac1 Observateur
L'Ã©tat de CTSS est Observateur. Permutation vers des vÃ©rifications de la synchronisation d'horloge Ã l'aide du protocole NTP
DÃ©marrage des vÃ©rifications de la synchronisation d'horloge Ã l'aide du protocole NTP (Network Time Protocol)...
La vÃ©rification du fichier de configuration NTP a dÃ©marrÃ©...
Le fichier de configuration NTP "/etc/ntp.conf" est disponible sur tous les noeuds
SuccÃ¨s de la vÃ©rification du fichier de configuration NTP
VÃ©rification de l'activitÃ© du dÃ©mon...
VÃ©rification : activitÃ© de "ntpd"
Nom de noeud En cours d'exÃ©cution ?
rac2 oui
rac1 oui
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'activitÃ© pour "ntpd"
Recherche de l'option de rotation "-x" dans la ligne de commande du dÃ©mon NTP
VÃ©rification : ligne de commande du dÃ©mon NTP
Nom de noeud Option de rotation dÃ©finie ?
rac2 oui
rac1 oui
RÃ©sultat :
Option de rotation du dÃ©mon NTP vÃ©rifiÃ©e
Recherche de l'option de rotation "-x" dans la configuration du temps d'amorÃ§age du dÃ©mon NTP, dans le fichier "/etc/sysconfig/ntpd"
VÃ©rification : configuration du temps d'amorÃ§age du dÃ©mon NTP
Nom de noeud Option de rotation dÃ©finie ?
rac2 oui
rac1 oui
RÃ©sultat :
VÃ©rification de l'option de rotation dans la configuration du temps d'amorÃ§age du dÃ©mon NTP exÃ©cutÃ©e
La vÃ©rification du serveur d'horloge NTP commun a dÃ©marrÃ©...
Le serveur d'horloge NTP "195.83.132.135" est commun Ã tous les noeuds sur lesquels il est en cours d'exÃ©cution
Le serveur d'horloge NTP ".LOCL." est commun Ã tous les noeuds sur lesquels il est en cours d'exÃ©cution
SuccÃ¨s de la vÃ©rification du serveur d'horloge NTP commun
La vÃ©rification du dÃ©calage de l'horloge par rapport au serveur d'horloge NTP a dÃ©marrÃ©...
VÃ©rification sur les noeuds "[rac2, rac1]"...
VÃ©rification : dÃ©calage de l'horloge par rapport au serveur d'horloge NTP
Serveur d'horloge : 195.83.132.135
Limite de dÃ©calage horaire : 1000.0 ms
Nom de noeud DÃ©calage horaire Statut
rac2 -2.734 rÃ©ussi
rac1 -1.906 rÃ©ussi
Les dÃ©calages horaires du serveur d'horloge "195.83.132.135" se trouvent dans les limites autorisÃ©es pour les noeuds "[rac2, rac1]".
Serveur d'horloge : .LOCL.
Limite de dÃ©calage horaire : 1000.0 ms
Nom de noeud DÃ©calage horaire Statut
rac2 0.0 rÃ©ussi
rac1 0.0 rÃ©ussi
Les dÃ©calages horaires du serveur d'horloge ".LOCL." se trouvent dans les limites autorisÃ©es pour les noeuds "[rac2, rac1]".
SuccÃ¨s de la vÃ©rification du dÃ©calage de l'horloge
RÃ©sultat : VÃ©rification de la synchronisation d'horloge Ã l'aide du protocole NTP (Network Time Protocol) rÃ©ussie
SuccÃ¨s de la vÃ©rification d'Oracle Cluster Time Synchronization Services
Echec de la post-vÃ©rification de configuration des services de cluster sur tous les noeuds.
[grid@rac1 grid]$

Error PRVF-7565 received when installing Grid Infrastructure 12102 on OEL7/64bit

Similar Messages

Maybe you are looking for