Error quicktime -50 and 0

Hello, when i export my work i have always the same error quicktime -50 or error quicktime 0, do you have any solutions ??
I cut my project : same error
i'm lost !
Many thanks for any help

From Crash Analyzer:
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
Suggested Actions
For best results, convert all long-GOP media to ProRes.
Make sure all images are RGB, not CMYK.
Ideally ensure all images are less than 4000 pixels in width and height.
Use Corrupt Clip Finder to locate the corrupt clip.
After the corrupt file is located, use QT Repair or Media Salvage to fix it.
Make sure your files do not have Digital Rights Management (DRM) that prevent them being played outside of their intended application. Some files purchased from the iTunes Store will have DRM.
Make sure you are using AIFF or WAV audio files.
More Information
System description for error -50: Error in user parameter list
Report generated by Crash Analyzer in Pro Maintenance Tools

Similar Messages

  • When upgrading quicktime, I get an error code: -3, and itunes will not run.

    when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

    i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

  • When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

    When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • Quicktime error code 1402 and 1603

    I was forced to update my itunes and now they wont install. First I try to install quick and it gets like 99% done then i get error code three. So i was told to go to www.apple.com\quicktime\download\standalone.html and that would fix my problems. So I went to install that and I get error codes 1402 and 1603. Please help me!
    dell   Windows XP  

    hiya!
    if we fix the 1402, the 1603 will go away of its own accord. here's the best place to start with a 1402:
    Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
    love, b

  • IPhoto '08, Microsoft Word 2004 and an error: QuickTime and TIFF

    Hi,
    When I drag and drop photos from iPhoto into Word, I get the following error:
    QuickTime and a TIFF (decompressor) are required to see the picture.
    The image is placemarked with a black border with the error message in the center. iPhoto indicates that the picture is JPEG. I have also discovered that dragging the picture to the desktop and then into Word works fine.
    I checked the console log and found the following:
    Rosetta Version: 17.25
    Args: /Applications/Microsoft Office 2004/Microsoft Word /Applications/Microsoft Office 2004/Microsoft Word -psn06029313
    Exception: EXCBADACCESS (0x0001)
    Thread 0: Crashed (0xb7fffabc, 0x82f58032)
    0x90016768: /usr/lib/libSystem.B.dylib : large_and_hugemalloc + 0x2d4
    0x903d9b94: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_decoderead + 0x1f4
    0x903ca6a0: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_interpolateread + 0x1a0
    0x903b44f8: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : img_datalock + 0x1008
    0x903b2658: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGSImageDataLockWithReference + 0xa8
    0x94c98128: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcAcquireImage + 0x3c8
    0x94c96554: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcDrawImage + 0x9b4
    0x903b0ce4: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGContextDrawImage + 0x198
    0xeab0ec48: No symbol
    0xeab12714: No symbol
    0x9182f1b4: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD : _PicItemVerb + 0x1010
    0x9182d8ac: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD : _DrawPicture + 0xa6c
    0xeab19ca0: No symbol
    0x844947d8: No symbol
    0x84495b00: No symbol
    0x81da7430: No symbol
    0x81b443ac: No symbol
    0x81e81754: No symbol
    0x81e81a38: No symbol
    0x81c9fd38: No symbol
    0x81c89b1c: No symbol
    0x81c851ec: No symbol
    0x81c84c94: No symbol
    0x81cab254: No symbol
    0x81c9c7f0: No symbol
    0x84ba0e68: No symbol
    0x84defd08: No symbol
    0x846a37b4: No symbol
    0x846766a8: No symbol
    0x846760c4: No symbol
    0x84aed218: No symbol
    0x84aed7c0: No symbol
    0x84b09454: No symbol
    0x8483c644: No symbol
    0x8483c9fc: No symbol
    0x846db090: No symbol
    0x846da528: No symbol
    0x846da2ec: No symbol
    0x819cdab8: No symbol
    0x843dcecc: No symbol
    0x843dce4c: No symbol
    0x843dcddc: No symbol
    0x843dcc8c: No symbol
    0x93242cdc: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x3e0
    0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
    0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
    0x932cdbc8: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _Z18SendHICommandEventmPK9HICommandmmhP20OpaqueEventTargetRefS3PP14OpaqueEventRef + 0x1b0
    0x93301894: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendMenuItemSelectedEvent + 0x84
    0x93301784: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _Z19FinishMenuSelectionP8MenuDataS0_P10MenuResultS2mmmh + 0x88
    0x932e68c8: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z14MenuSelectCoreP8MenuData5PointdmPP13OpaqueMenuRefPt + 0x194
    0x932e63f0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _MenuSelect + 0x64
    0x843dc074: No symbol
    0x93242cdc: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x3e0
    0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
    0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
    0x9324a34c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z29ToolboxEventDispatcherHandlerP25OpaqueEventHandlerCallRefP14OpaqueEventRef Pv + 0x8d0
    0x93242ff4: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 0x6f8
    0x932422e0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __Z30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 0x160
    0x93249a58: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SendEventToEventTarget + 0x28
    0x843d2850: No symbol
    0x8469fabc: No symbol
    0x845cc5fc: No symbol
    0x81994464: No symbol
    PPC Thread State
    srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
    cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x903d35e4 ctr: 0x00000ed9
    r00: 0x00000087 r01: 0xbfff8f40 r02: 0x00000084 r03: 0x11074bec
    r04: 0x00000001 r05: 0x00000002 r06: 0x00000003 r07: 0x00000000
    r08: 0x0ef62000 r09: 0x00000079 r10: 0x0cc054d0 r11: 0x00000004
    r12: 0x903d99a0 r13: 0x00000000 r14: 0x00002059 r15: 0x00000000
    r16: 0x00002059 r17: 0x0ef5da00 r18: 0x0cc02050 r19: 0x11074be0
    r20: 0x00000000 r21: 0x00000020 r22: 0x110e50a0 r23: 0x00000060
    r24: 0x00000060 r25: 0x00000008 r26: 0xffffffff r27: 0x00000001
    r28: 0x00000018 r29: 0x00000003 r30: 0xbfff9030 r31: 0x903d35e4
    Thread 1: (0xb00997fc, 0xb8134443)
    0x90005a20: /usr/lib/libSystem.B.dylib : _free + 0x5c
    0x00715204: No symbol
    0x9002bbe8: /usr/lib/libSystem.B.dylib : _pthreadbody + 0x60
    0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0x0
    PPC Thread State
    srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
    cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x9000a97c ctr: 0x9000aa20
    r00: 0xffffffe1 r01: 0xf0080ce0 r02: 0x00000001 r03: 0xf0080dcc
    r04: 0x00000102 r05: 0x00000000 r06: 0x00000054 r07: 0x00003303
    r08: 0x000003e8 r09: 0x00000000 r10: 0x00000006 r11: 0xa00069a4
    r12: 0x9000aa20 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
    r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
    r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
    r24: 0xf0080dcc r25: 0x00000054 r26: 0x00003303 r27: 0x000003e8
    r28: 0x00000000 r29: 0x00000102 r30: 0x00000102 r31: 0x0071ffb0
    The system is an iMac7,1 (20" alu)
    Any help would be appreciated. This seems to be a new problem, as I was able to drag+drop from iPhoto '08 into Word after upgrading to '08. I do not recall when the problem began.
    Thanks!

    Hi
    This sounds like a problem that's been discussed many times. If you use the Search button (select more options) and change the 'Restrict by Date Range' to something like 'Last Year' you should find something? You might want to read these:
    http://www.macintouch.com/readerreports/office2004/topic2741.html
    http://forum.soft32.com/mac/save-files-open-ftopict89866.html
    I think Office 2008 is supposed to have made things better?
    Tony

  • When i take photos or videos on my ipod touch with the camera, then i plug it into the computer to sync, the computer shuts down and this blue screen comes up saying "an error has occured" and a heap of other stuff.

    When i take a photo or a video using the camera on my ipod touch, the computer (windows xp) shuts down and a blue screen comes up saying "an error has occured" and a heap of oth stuff in white. It doesn't wipe the memory or anything off the ipod. Whenever i sync my ipod without photos or videos it works fine. It also doesn't mind me taking photos off itunes to put on the ipod. I have had a look around and a couple of people say reinstall itunes, but i don't know if i will lose all my songs and apps. Any suggestions of help?

    Removing all Apple related software and reinstalling iTunes should bring all needed drivers back: Removing iTunes, QuickTime, and other software components for Windows XP
    Also check for new driver updates for Windows, especially if you have a webcam installed.
    iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
    copied from the article about reinstalling iTunes

  • I am getting an error 7 (windows error 999) message and can't uninstall iTunes or install iTunes on my PC?

    I am getting an error 7 (windows error 999) message and can't uninstall iTunes or install new versions of iTunes on my PC? Any suggestions?

    Hi jschnurr,
    I recommend the steps in this article, including how to completely remove iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers!
    - Ari

  • ITunes 9.2.1.5. will not open - ERROR "QuickTime was not found"

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists. I have been able to open iTunes when re-installed but when syncing to the iPhone 4 even the unchecked music syncs. when I reboot I cannot open iTunes again(ERROR "QuickTime was not found")
    Someone please help. I am running Windows 7 Ultimate on a Lenovo R500
    Thanks In Advance.

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

  • Processing service request error: QuickTime Error: -50? ***?

    Hey everyone, trying to export a movie from FinalCut Pro X with compressor and when compressor gets to the end I get this error and no file
    Processing service request error: QuickTime Error: -50
    What is going on?
    Final Cut Pro X version 10.0.7
    Compressor 4.0.6
    <mrk tms="377617624.517" tmt="12/19/2012 14:47:04.517" pid="739" kind="end" what="service-request" req-id="BDCFEEB8-D118-43F1-9011-957801579EDD:1" msg="Processing service request error: QuickTime Error: -50"></mrk>

    Got this error -50 too.
    At first thought it could be due to incompatible format but when I isolate it, it was alright.
    But when I change my ext HDD, the problem stops. Weird.
    My guess is maybe due to insufficient memory space (well at least for me).
    Good luck ...
    Cheers

  • I have purchased Quicktime Pro and can't enter key!

    I am using a windows vista PC, I have downloaded Quicktime 7 and then gone on to purchase the key for Quicktime pro. However! I can not find the QuickTime 7 Control Panel within my computer's control panel or anywhere else on the system for that matter! When I checked my windows XP PC to compare, I found the quicktime control panel straight away! Is this problem relating to the PC having Vista as an operating system, and if so is there a way round it as I really need to set up pro on my Vista machine.
    thank you in advance for anyone who can help, this is making my head hurt!

    Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
    Also make sure you purchased a key for the correct platform (Windows or Mac). QuickTime keys are not cross-platform.

  • Ipodmini--error 1417/1418 and no music

    when i plug in my ipod it connects, but when i try and update it says error 1417 - if i try and restore it says 1418, SO CONFUSED! also, when i try to play music after its unhooked, it just skips thru each song per second going from one to the other. SOMEONE HELP PLZ

    The program opens but will play no music. Error message reads: Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly
    that one is usually produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch/play properly now?

  • "Share Error: Quicktime 0" error message in FCP - any ideas why?

    Getting an error that states "Share Error: Quicktime 0" when using the share function to write to blu-ray. Of course, this comes at about 3 hours into a four hour encode, and of course everything is lost after this completely useless message. I've got the most recent version of QT, all the updates have been added, etc.
    I burned one BD and one BD on DVD with no problems, and nothings changed. I've gotten this error twice in a row now, and rendering for three hours just to get this is beyond annoying.

    See if anything here helps: iPod not recognized correctly on Toshiba laptop

  • After Effects error: Quicktime export failed - Out of memory (-108)

    I am using CS3 After Effects and have been receiving this After Effects error: Quicktime export failed - Out of memory (-108).  Can anyone help with this issue?
    I am using a Mac Pro 6-Core Intel Xeon 2.66 GHz with 6 memory slots at 1GB DDR3 ECC at Speed 1333MHz.

    Sounds like one of those many "old version of AE on new hardware" issues... You may need to fiddle with Rosetta or install it in teh first place, if you haven't already and you may also require a specific older version of Quicktime...
    Mylenium    

  • Error: QuickTime Streaming failed to load because it is already loaded

    This error message repeats continously. Any suggestions?

    I have struggled with the same problem for the last few years and could not find any adequate answers. Being a person who likes to run his PC clean and mean, I had stopped all those Apple Itunes / Quicktime applets and deleted Itunes application as I preferred other Media players & converters. Recently my Nokia 6300 phone suite would send me the same error every song I moved from PC to phone. The clue was that I had chosen Optimised AAC format instead of stock standard MP3. Working on this hunch, I re-activated Apple's Software Update from the Scheduled Tasks items of Control Panel to update Quicktime, Itunes and Safari. Now I have AppleMobileDeviceService.exe, iPodService.exe, iTunesHelper.exe all running and I do not get the error anymore. There is also the Bonjour (DNSResponder.exe) service to be considered. See:-
    http://www.tombraiderforums.com/showthread.php?t=122420
    http://digg.com/apple/iTunes5Disasters

  • Itunes continues to crash and I get the Data Execution Prevention error from Windows and it shuts down. How do I fix my Itunes?? This startes happening after the Itunes update

    Itunes continues to crash and I get a Data Execution Prevention error.

    Vista 64 bit
    Many thanks. If you're still not launching after your complete uninstall/reinstall, we'll go searching for old QuickTime componentry stashed in non-standard locations on the PC.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    Open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Maybe you are looking for

  • Not able to view certifiacte in QC55

    Hi All, I am trying to do a GR from an inbound delivery. The storage location is HU managed. After doing the GR i go to QC55 to view the certificate i dont see it. The certificate is put "YES" in inbound delivery. Material master is maintained with c

  • Connecting source system in Bi 07

    can anyone help to connect the Soure system (mssql) in bi7, any documents or links please help me. i tryied to connect but getting error (When calling a function within the database interface, a return value which cannot be processed by the calling f

  • Is it possible to create a panel with JavaScript?

    Hi friends As I´m studying JavaScript and the user interface creation...would like to ask (more for curiosity): Is it possible to create a new panel for Illustrator using JavaScript? Or this is only possible using C++? (in the Window Class UI we have

  • How do I get 'reminders' on my ipod touch to appear on my iMac

    I'm trying to figure out how to get my iPod Touch apps, 'Reminder', and 'Notes', to appear on my iMac. Any help?

  • Error running PL/SQL with too many parameters

    Developer 10g (9.0.5.1 Build 1605) seems to have a memory limitation when running a PL/SQL procedure. The dialog box that is created to allow running and/or debugging of PL/SQL procedures defaults the parameter sizes to 200 bytes. At a certain point