Error R6034 When Loading a DLL

Hi,
I'm getting a R6034 error when I attempt to load a 3rd-party DLL into a CallLibraryFunctionNode:
I figure it has to do with missing dependencies, but I'm having problems getting everything in order. Using 'Dependency Walker', it lists 'ieshims.dll' and 'wer.dll' as missing. When I add those (from download sites), new dependcies are formed the process repeats.
The work was done on a Windows XP w/SP3 (virtual) machine. You can download a zip of the DLL in question as well as the other DLLs contained in the same folder here (it was too large to attach). The DLL in question is 'TndRtrApi.dll'. If someone with more experience in solving these problems could take a look, I'd appreciate it. Thanks.
-Joe

Sounds like you need to be in conversation with the 3rd party that wrote the DLL and findout what dependencies it has and where they need to be located.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

How to correct Runtime error R6034 when attempting to update iTunes on PC?

How to correct Runtime error R6034 when attempting to update iTunes on PC?

Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Acrobat fatal error: failed to load core dll

Hi,
I have a problem with acrobat reader on my laptop.
My OS is Vista Home Premium.
I had Master collection CS4 installed.
When starting up acrobat reader; i got following error:
failed to load core dll.
I went to the log and this is the explenatoin written in there: (i'm dutch speaking)
Kan activeringscontext voor 'C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.dll' niet maken. Fout in manifest of beleidsbestand '' op regel . Een onderdeelversie die nodig is voor de toepassing conflicteert met een andere onderdeelversie die reeds actief is. Conflicterende onderdelen zijn: Onderdeel 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt _1fc8b3b9a1e18e3b_8.0.50727.42_none_db5f52fb98cb24 ad.manifest. Onderdeel 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt _1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb 8f8.manifest.
Kan activeringscontext voor 'C:\Windows\system32\BHOManager.dll' niet maken. Fout in manifest of beleidsbestand '' op regel . Een onderdeelversie die nodig is voor de toepassing conflicteert met een andere onderdeelversie die reeds actief is. Conflicterende onderdelen zijn: Onderdeel 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt _1fc8b3b9a1e18e3b_8.0.50727.42_none_db5f52fb98cb24 ad.manifest. Onderdeel 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt _1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb 8f8.manifest.
I simultaneously had a problem with Dreamweaver.
I think all this is caused by an Side By Side configuration issue.
I've tried to do following steps:
-redistibrutable 2008 c++ package geinstall
-system recoverage tool
-reinstall cs4 master collection
-uninstall master collection, clean up, install reeware acrobat reader
-uninstall acrobat reader, ccleaner register issues resolver , also older than 24 uur , reboot, install acrobat reader freeware
-revo uninstall tool to remove acrobat
none of the above actions were successful.
What could u suggest or give as a solution.
Atm i'm using an altarnative pdf-reader.
But as i bought the master collection,
i'd rather have my adobe acrobat reader pro and dreamweaver working.
Thanks in advance,
With friendly regards
Anton

Hi Anton
I am sorry, I do not have an answer just a similar problem.
I am no expert, but all these manifest files are to ensure that different developers can ensure that the appropriate versions of common libraries are used by particular versions of their software.
Deatils are below. The original problem was a corrupted manifest file, probably due to a disk error. This resulted in several programs failing to run. In particular I was unable to access backup on my Windows Home Server. From the logs I was able to identify the manifest file in error and located a copy of a file with the same name on another of my computers. Using notepad I then changed the file causing the problem to match the file on the other computer.
This appeared to resolve all my problems.
When the Acrobat Reader updated itself, however, the"failed to load core DLL" message appeared. Simply uninstalling all adobe programs and re-installing makes no difference.
If you have the solution please post.
If not, I will continue to research this problem.
Very best wishes
Graham
Details from error log and manifest files:
Acrobat failed to load its core DLL
Log Name: Application
Source: SideBySide
Date: 29/10/2010 23:30:07
Event ID: 80
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: 9GHASUSP5QSEx64
Description:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\AcroRd32.dll".
Error in manifest or policy file "" on line .
A component version required by the application conflicts with another component version already active.
Conflicting components are:.
Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d 08a205e442db5b5.manifest.
Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.762_none_10 b2f55f9bffb8f8.manifest.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
 <noInheritable></noInheritable>
 <assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.4927" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
 <file name="msvcr80.dll" hash="b2cd2205044f7cfd822da03b5f8d329ac5f4fcde" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>niXcYiF5k0Z3fQ7PBFMJuaYHWTU=</dsig:DigestValue></a smv2:hash></file>
 <file name="msvcp80.dll" hash="984100dac2591da1a03c5146fecc47eb5deabec7" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>aW9cDm76mbaI14MUAAx8P0auVdE=</dsig:DigestValue></a smv2:hash></file>
 <file name="msvcm80.dll" hash="34d9d81de781f7566e20e2bd33e410bc80837703" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>pyazDrJIgYvW/Y3vCJt/9hpimHA=</dsig:DigestValue></a smv2:hash></file>
</assembly>
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
 <noInheritable></noInheritable>
 <assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.762" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
 <file name="msvcr80.dll" hash="10f4cb2831f1e9288a73387a8734a8b604e5beaa" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>n9On8FItNsK/DmT8UQxu6jYDtWQ=</dsig:DigestValue></a smv2:hash></file>
 <file name="msvcp80.dll" hash="b2082dfd3009365c5b287448dcb3b4e2158a6d26" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>0KJ/VTwP4OUHx98HlIW2AdW1kuY=</dsig:DigestValue></a smv2:hash></file>
 <file name="msvcm80.dll" hash="542490d0fcf8615c46d0ca487033ccaeb3941f0b" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>YJuB+9Os2oxW4mY+2oC/r8lICZE=</dsig:DigestValue></a smv2:hash></file>
</assembly>

T420i - Power Manager - Error occurred while Loading resource DLL

Hi Team,
I am facing an issue here, wherein, when I try to start the application : Lenove Power Manager, i get the following error msg:
"An error occurred while loading resource DLL". I am not sure how to get this working. Can someone please help me out with this.
Regards,
Surya

Welcome to Lenovo Community! Surya
1. Uninstall existing Power Manager.
2. Download the new Power Manager from the link below and install:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Error 1 when loading flat file in BW 7.0

Hi,
The flat file structure is same as the transfer structure. Its a csv file and i also checked about the delimiters and stuff.The flat is not open and it is closed while i am loading it. The same file gets loaded if i try in another laptop with my id.If i use my colleague's id on my system also...it doest work...so, the basic problem is with my laptop. I know its nor related to type of data or transfer structure. Its some settings on my laptop which got changed automatically. If i install some other softwares like mozilla firefox or yahoo msg-will that create a problem? I am not at all understanding why its like this. Please help.The error msgs i get when i try to load the flat file -
Error 1 when loading external data
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Error when opening the data file C:\vikki1.csv (origin C)
Message no.
Diagnosis
File C:\ vikki1.csv (origin C) could not be opened.
Origin:
A : Application server
C : Client workstation
Procedure
Check whether the file entered exists and is not been used by other applications.

Hi! Vikki,
Error 1 means your flat file is open while uploading the data..
your flat file should be closed while uploading data in BW.
that is why it is saying "Error when opening the file..".
first close that file n then upload..it will work.
rest of the things are ok!..
I hope this will help you.
Regards,
khyati.

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can o a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

I puchased the Photoshop/Lightroom, but when I try to download Lightroom I get the following error message:Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7 BrzzYZ9hLdjmpvEWeq7/9gSYn2 lUDLZNr9UveWEgxzaiobbibx4d6

I get the following error message when attempting to load Lightroom: Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7+BrzzYZ9hLdjmpvEWeq7/9gS Yn2+lUDLZNr9UveWEgxzaiobbibx4d6JK3R74HPAX4YFwTpkn6K3YQk6Ej82wRFyYvKwXKAVMfMhQCfW5qg8odoMny OV1JlBuT0gEMjSjG5EhuCR288pgnfgQbAmchGqKSU=
What can I do to solve the problem?

Ewlett you are receiving this error because the AAM Detect plug-in is not yet installed. Please see Error referring to aam protocol when you click download button | CC for more details.

Error handling when loading flate files

Hi
We have a Process Chain loading flate files from a server into a ODS. We want to create a routine to avoid errors in the ODS when no files is found.
The error we want to handle is
Error 1 when loading external data
Message no. RSAR234
We want to handle this error message as OK to avoid red request in the ODS
Please help
Kind regards
Ola Einar Langen

Hi, and thanks for your hints.
We ended up with the following codes. It's will mark the prosess chain red (but this is as wanted) but we have implemented that the prosess chain will proceed even with error in the loading process
The code for the routine implemented in the infopackage in "External data" tab.
p_filename = 'filename.txt.
OPEN DATASET p_filename FOR INPUT IN BINARY MODE.
If file could not be open
IF SY-SUBRC NE 0.
p_subrc = SY-SUBRC.
delete the current request
CALL FUNCTION 'RSSM_DELETE_REQUEST'.
ENDIF.
close the file if OK
CLOSE DATASET p_filename.
p_subrc = 0.
The solution is no OK for us
Kind regards
Ola Einar Langen

An error occurred when loading the Cube ; Analysis services 2012

Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/

Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support

Error 41453 When loading opportunities

Hello there,
Could anybody help me with this question: when loading opportunities, I get this error message: "An unexpected error occurred during the import of the following row: 'Opportunity Name: tests; Direct Customer: ' " does anybody knows what does this mean?
Cheers
Joann

Hello,
I had the same error. Error 1 when loading external data from a flat file. I didn't now what was wrong with it. We started to make some test and try the solution we read here but the error continued, and it finally worked when we changed the name of the file, and got rid of all the blanc spaces in the name.
I hope it works for you too.
Regards.
Message was edited by:
AltimBW Astral

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

Error occurs when loading transaction data from other model

Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
Praveen

Hi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST)

Error 4 when loading external data

hi all,
I have unchecked uncheck currency conversion for external systems in my info package and then loaded the data from a flat file.
and then i am getting the below errors.
cost -> cannot be converted to currenecy (since cost contains currency item)
netval_inv -> cannot be converted to currenecy (since cost contains currency item)
/bic/zntwthpm -> cannot be converted to currenecy (since cost contains currency item).
if i check the option
currency conversion for external systems in my info package
then i am getting error 4 when loading external data.
Can anyone help me out!!!
thanxs
haritha

Hi haritha,
Please check whether your file whcih you are loading is open , when you are starting the Infopackage.
Also please check this SAP Note 600246 - RSAR 234: Error 4 when you load external data.
What is your BW System (Version/Patch)
Thanks.
CK

Error R6034 When Loading a DLL

Similar Messages

Maybe you are looking for