Error raised when using a CallBack function on a Richtextbox
Hi,
I am using a RichTextBox with a Callback VI attached to the Keypress event. Everytime I cause the kepress event to go off I get the attached error.
I have created a small project to demonstrate the issue, also attached.
I'm running Labview 2009 but have seen the issue on other version as well.
Any ideas on what is causing the error would be most useful. Have not implemented the CallBack VI correctly or is there some other issue I need to be aware of?
Thanks
Attachments:
Error message.png 24 KB
RichTextBoxCallback.zip 23 KB
Hello Ruffdi,
In order to get your 8.5 code to work as intended, you should wire the RichTextBox reference to your User Parameter input on the Event Callback (see pic below), and you should see the "KeyPress Detected" appear on your front panel.
Also, make sure you add a little delay in your while loop, and a Close Reference function at the end of your code right after the while loop, to close the reference you open with the RichTextBox.
I hope this helps for now, as I cannot find a workaround to the issue we are seeing in LabVIEW 2009.
Let me work on this slightly more and see what we can do.
smercurio_fc, thank you kindly for all your help so far, it is much appreciated.
Kind Regards,
Michael S.
Applications Engineer
NI UK & Ireland
Similar Messages
-
Trouble retrieving Button value when using OnPlotAreaMouseUp() Callback function
I'm using an NiGraph control and have set it up for the OnPlotAreaMouseUp event. I get to the OnPlotAreaMouseUp() callback fine, but the *Button value is always set to 0, and therefore I cannot ascertain which mouse button has been released. The *Shift value seems to work fine however.
This appears to be a bug in the current version of the graph - I will log a bug report about this issue. The button parameter is set correctly in the PlotAreaMouseDown event, so for now you could work around it by caching the button value in the PlotAreaMouseDown event and evaluating the cached value in the PlotAreaMouseUp event.
- Elton -
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur -
Error message when using search
why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.
Well, I believe JHeadstart does not really have this functionality.
One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
This is probably not what you want...
But you could hack it into advancedSearch in YourApplicationModuleImpl
try {
if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
value = viewCriterium.getQueryValue().toString();
} else {
value = null;
catch (NumberFormatException ex) {
//insert check for wildcard
value = viewCriterium.getValue().toString();
if (value.indexOf('%')>=0) {
sLog.debug("Ja, een wildcard!!!");
operator = "LIKE";
} else {//original exceptionhandling code here...
...and a bit later, add test for "LIKE":
if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
value = "'" + value + "'";
very nasty code, and does not raise an exception for searches like '%xxx'
Good luck,
HJH
Edited by: HJHorst on Mar 5, 2009 12:03 AM -
An error occurred when executing a REMOTE FUNCTION CALL.
Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "RFC_NO_AUTHORITY"
on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu -
Licence error message when using automation software
Error message when using Rational Functional Tester 7.0.1.1
to record a Flex application. The message seemed to come from the
Flex application.
I can record a fiew step in the application, then I have the
message : "Licence are not present. Eith the trial version only
limited record are allowed". But, my license of my Rational
Functional Tester application is activated.
I am using a Flex builder 3 trial version and the trial is
not over.
Is there any problem to get the license in the File compiler
with "D:\apps\IBM\SDP70\FunctionalTester\bin\rft.swc"? That RFT
file is supposed to be included in the flex application once
compileDoes anyone know how to build with automation support in a
linux environment?
We simply run an ant script build and have the SDK installed.
We purchased Flex Builder Professional, but cannot install on Linux
(we don't want to use the alpha version).
Thanks for any pointers :) -
My Application gets Error 37 when using Serial Port VIs.
My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
Does anybody have another idea ?
Many thanks for help
Thomas>Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
Nevertheless many thanks for your answer
Thomas -
App crash when using JAVA callbacks from native threads in solaris
Hi all,
Sorry for putting the thread here. I did use the native methods forum, I wasnt lucky. I Hope more people would look into this forum, which brings me here.
I have a solaris application which crashes when I try to callback the JAVA methods and variables from the native code. The description of the problem is below
Written a native library, the library is multithreaded (i.e) I create a thread using pthread_create() in the native code which performs the operation of calling a JAVA method from the native code. The routine of calling the JAVA method works perfectly elsewhere outside the new thread.
There are two scenarios I've tested it in
1. I created a thread (say X) from the main thread (say Y) and made the y to wait until the X is complete using the pthread_join(). The JAVA callbacks works fine when called from Y but the app crashes if done from X.
2. Did not make the Y to wait until the X is complete, hoping that both will run paralelly and even the the App crashes.
And to be precise the Y is the thread where the native method is called from JAVA.
I have tested for any memory leaks or stack corruption by removing the JAVA callbacks and bulding a executable and using purify, the report doesnot hint any such occurances.
The linker options used for building the shared library is as follows
${GPP} ${INC} -G ${LIB} -mt -g -lCstd -lCrun -lpthread ${OBJS} -o <lib-name>
I wonder if we can create threads in the native code when using JAVA callbacks and even if we can whether it would be appropiate to use the callbacks with in the threads
Looking forward for any help.
Regards,
VamsiGuys... can't any one help me with this problem :(
-
App crash when using JNI callbacks
Hi all,
I have a solaris application which crashes when I try to callback the JNI methods from the native code. The description of the problem is below
Written a native library, the library is multithreaded (i.e) I create a thread using pthread_create() in the native code which performs the operation of calling a JAVA method from the native code. The routine of calling the JAVA method works perfectly from elsewhere.
There are two scenarios I've tested it in
1. I created a thread (say X) from the main thread (say Y) and made the y to wait until the X is complete using the pthread_join(). The JAVA callbacks work fine when called from Y but the app crashes if done from X.
2. Did not make the Y to wait until the X is complete, hoping that both will run paralelly and even the the App crashes.
And to be precise the Y is the thread where the native method is called from JAVA.
I have tested for any memory leaks or stack corruption by removing the JAVA callbacks and bulding a executable and using purify, the report doesnot hint any such occurances.
The linker options used for building the shared library is as follows
${GPP} ${INC} -G ${LIB} -mt -g -lCstd -lCrun -lpthread ${OBJS} -o <lib-name>
I wonder if we can create threads in the native code when using JAVA callbacks and even if we can whether it would be appropiate to use the callbacks with in the threads
Looking forward for any help.
Regards,
VamsiGuys... can't any one help me with this problem :(
-
ERROR MESSAGE WHEN USING PACK COMMAND Missing file ////presenter.css Command then fails
Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers
Thoughts? Using Presenter 10 Win 8.1 Intel I7 new HP with plenty of memory
ThanksI had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O. -
Error message when using xrpcc in JWSDP 1_0_01
Dear all,
I've got the following error message when using xrpcc of JWSDP 1_0_01 for my config.xml file.
D:\jwsdp-1_0_01\Message>xrpcc -classpath build -both -d build config.xml
error: invalid element "{http://java.sun.com/jax-rpc-ri/xrpcc-config}configurati
on" in configuration file (line 2)
The content of 'config.xml' is shown as follows.
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/jax-rpc-ri/xrpcc-config">
<rmi name="MessageService"
targetNamespace="http://messageuri.com/wsdl"
typeNamespace="http://messageuri/types">
<service name="MyMessage" packageName="Message">
<interface name="Message.MessageIF"
servantName="Message.MessageImpl"/>
</service>
</rmi>
</configuration>
Thank you for your kind attention!
Regards,
EddieThanks all! I've already solved my previous problem, however, i got another one now.
=========================================================
error: unknown model info in configuration file (line 5)
=========================================================
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<rmi name="MessageService"
targetNamespace="http://messageuri.com/wsdl"
typeNamespace="http://messageuri.com/types">
<service name="MyMessage" packageName="Message">
<interface name="Message.MessageIF"
servantName="Message.MessageImpl" />
</service>
</rmi>
</configuration>
Thanks,
Eddie -
Error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'.
I'm continually getting an error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'. The message being 'Table BAPIADTEL entry to be changed not found in target system'.
I have looked up this message but all links seem to refer to FM 'BAPI_BUPA_CENTRAL_CHANGE', which I'm not using, and has different parameter settings.
I'm simply trying to update the telephone number and I'm updating strcuture BAPIADTEL and BAPIADTELX but still the message appears. I know that there is a really simple reason for this, but I have been double-checking everything and experimenting with lots of different areas, but with no effect.
Has anyone encountered this problem using the specific FM ''BAPI_BUPA_ADDRESS_CHANGE' ?.
JasonHi Jason,
In case your database tables had already value for field telephone number, then only the flag should be "U".
If the telephone number field was empty, and we will try to change it by using the flag as U, it wont work. In this case, we should be using "I".
I even wrote that before in this post, but somehow I guess the post was locked, and a lot of comments from you and me were not visible apart from the first two. So, I couldnt get any update from you.
Anyway, its good that its working for you. Thank you for the update.
Regards,
Susanta -
Error Message-When using DataScroller
Hi
I get the following error message when using DataScroller. I am using Oracle Jdeveloper 9i production release.
Application Error
Return
Error Message: null
java.lang.NullPointerException
int oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(int)
int oracle.jbo.server.ViewRowSetImpl.scrollRange(int)
int oracle.jbo.server.ViewObjectImpl.scrollRange(int)
int oracle.jbo.html.jsp.datatags.RowsetNavigateTag.doStartTag()
void DataHandlerComponent.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
int oracle.jbo.html.jsp.datatags.ComponentTag.doStartTag()
void Rate.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.GetParametersRequestDispatcher.include(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.EvermindPageContext.include(java.lang.String)
void BrowseTab.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
void com.evermind.util.ThreadPoolThread.run()Issue has been resolved .Ingnore this
-
Adobe Air error message when using PSE 10
When I try using the tips in PSE 10 I get an error message from Adobe Air stating that it is damaged. Have tried uninstalling and re-installing, but that hasn't helped. I have windows 7
Okay Jeff, this is as far as I have gotten so far. I'm using Air version 3.2.0.2070. This is the install log.
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent -eulaAccepted -programMenu AdobeHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp -silent -withRuntime -url -programMenu -eulaAccepted file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Installed runtime (2.6.0.19120) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air to C:\Users\Vette\AppData\Local\Temp\flaE4EA.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla71A.tmp
Native installation package creation succeeded
Starting silent combined runtime update and app install.
Updating runtime from version 2.6.0.19120 to version 2.6.0.19140.
Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 to C:\Program Files (x86)\Adobe using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/ElementsSTIInstaller/payloads/AdobeHelp/Adob eHelp.air
Reinstalling C:\Users\Vette\AppData\Local\Temp\AIRD0CE.tmp\setup.msi
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla71A.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -silent "E:\Adobe Photoshop Elements 10\AdobePhotoshopDotcomInspirationBrowser.air"
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Invoking Application Installer for combined install
Launching subprocess with commandline C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Application Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -runtime C:\Users\Vette\AppData\Local\Temp\AIR4EA4.tmp -silent -withRuntime -url file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air to C:\Users\Vette\AppData\Local\Temp\fla634C.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'PhotoshopdotcomInspirationBrowser' and pubID '4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla7325.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app PhotoshopdotcomInspirationBrowser.4C35C4D325D350FE0114230CBADCA2DDD0AC8D25.1 version 3.07 using the source file at file:///E:/Adobe%20Photoshop%20Elements%2010/AdobePhotoshopDotcomInspirationBrowser.air
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla7325.tmp\setup.msi with guid {4C184855-B85A-6873-C642-60A58682E721}
Application Installer end with exit code 0
Subprocess app installer succeeded
Runtime Installer end with exit code 0
Launching subprocess with commandline C:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 2.6.0.19140 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.6.0.19140/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Unpackaging complete
Download success
Runtime updated downloaded
User has selected immediate install of the update
Starting runtime background update installation
Launching subprocess with commandline C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update
Runtime updater successfully launched
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -update
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airafa3.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_704_0 -ei
Installed runtime (2.6.0.19140) located at C:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 2.6.0.19140 to version 3.1.0.4880
Installing msi at c:\users\vette\appdata\local\temp\airafa3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -updatecheck
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Clearing unused background update directory
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Runtime Installer end with exit code 6
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\aire7af.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4784_0 -ei
Installed runtime (3.1.0.4880) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting silent runtime update. Updating runtime from version 3.1.0.4880 to version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\aire7af.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -arp:uninstall
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Relaunching with elevation
Launching subprocess with commandline c:\program files (x86)\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_3840_0 -eu
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\airbda4.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_764_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\airbda4.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is:
No installed runtime detected
Relaunching with elevation
Launching subprocess with commandline c:\users\vette\appdata\local\temp\air2fa8.tmp\adobe air installer.exe -ei
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_5396_0 -ei
No installed runtime detected
Starting silent runtime install. Installing runtime version 3.2.0.2070
Installing msi at c:\users\vette\appdata\local\temp\air2fa8.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Runtime Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
Runtime Installer end with exit code 0
Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -installupdatecheck
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Performing pingback request
Pingback request completed with HTTP status 200
Starting runtime background update check
Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update
Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.2.0.2070/update to C:\Users\Vette\AppData\Roaming\Adobe\AIR\Updater\Background
Runtime update not available
Unpackaging cancelled
Runtime Installer end with exit code 0
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -playerVersion=11,2,202,233 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=true -- -url http://www.adobe.com/support/chc/air/350/AdobeHelp.air -- WWW aHR0cDovL3d3dy5hZG9iZS5jb20vc3VwcG9ydC9jaGMv
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Begin air file download from http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download destination is C:\Users\Vette\AppData\Local\Temp\fla7A97.tmp
Received download status 200
Response URL is http://www.adobe.com/support/chc/air/350/AdobeHelp.air
Download success
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\flaB22B.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\flaC7B.tmp
Native installation package creation succeeded
Starting app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Relaunching with elevation
Application Installer begin with version 3.2.0.2070 on Windows 7 x86
Commandline is: -stdio
.\pipe\AIR_4952_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)\Adobe" -desktopShortcut -programMenu file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installed runtime (3.2.0.2070) located at c:\Program Files (x86)\Common Files\Adobe AIR
Unpackaging file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp to C:\Users\Vette\AppData\Local\Temp\fla3260.tmp
Application signature verified
Unpackaging/validation complete
No app located for appID 'chc' and pubID '4875E02D9FB21EE389F73B8D1702B320485DF8CE.1'
Converting unpackaged application to a native installation package in C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp
Native installation package creation succeeded
Starting silent app installation to C:\Program Files (x86)\Adobe. Installing app chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 version 3.5.23 using the source file at file:///C:/Users/Vette/AppData/Local/Temp/fla7A97.tmp
Installing msi at C:\Users\Vette\AppData\Local\Temp\fla3BF3.tmp\setup.msi with guid {BD7F1DA3-5EA0-65F8-52B0-5E103FDC045A}
Application Installer end with exit code 0
Elevated install completed
Launching subprocess with commandline C:\Program Files (x86)\Adobe\Adobe Help\Adobe Help.exe
Application Installer end with exit code 0
Date: Thu, 12 Apr 2012 17:10:46 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air error message when using PSE 10
Re: Adobe Air error message when using PSE 10
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Vetteski65 I would recommend reviewing Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.ht ml for steps on how to resolve your difficulties. Please feel free to respond to this thread if you have any questions about the steps listed within the document. If you could also respond with the specific error message you receive it would be appreciated.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4331328#4331328
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4331328#4331328. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.
Maybe you are looking for
-
APEX 3.1.2: How to show a jpeg/pdf inside a geotag from a GIS app?
I am developing a small Oracle Maps Application for my diploma thesis at my university. I've found the "Hands-on Lab: Developing an interactive mapping application for your Oracle database using Oracle Maps" held in October 2006 in San Francisco and
-
Is it possible to import hard copies of DVDs into your iMac or iTunes collection?
I would like to import my child's dvd's to the my mac computer so that I can stream them w/ Apple TV. Is this possible?
-
Change Material Number using BAPI_PO_CHANGE, PO OrderUnit reset to base UoM
Hi Experts, I am using IDOCs and BAPI_PO_CHANGE to update PO's in SAP (as PO's are created/maintained in an external system and interfaced to SAP). This works fine except for a change in the material number, the PO Order Unit is getting reset to the
-
Aperture 3- Calls Master image version 2 ????
Downloaded the trial of Aperture 3. Started playing around with it and noticed that the master image is being called version 2 and the actual adjusted version is not even labeled as a version. If I create multiple other versions of the image they are
-
Hello, I have a Oracle 9i database which is running in Archivelogmode mode and I perform online backups with RMAN. I use the command: backup tablespace <tablespace_name>; My documentation now says that I would have to put the specific tablespace into