Error: Read timed out&MESSAGE_NOT_FOUND.

Hi,
There's a synchronous scenario (File-File). A connection failure occured during a query from buisness-process (BPM). Since then an error (error message) appears constantly in Runtime Workbench-Component Monitoring-Communication Channels.
Success
RRB: entering RequestResponseBean
Success
RRB: passing through ...
Success
RRB: suspending the transaction
Success
RRB: leaving RequestResponseBean
Success
Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
Success
Trying to put the message into the call queue.
Success
Message successfully put into the queue.
Success
The message was successfully retrieved from the call queue.
Success
The message status set to DLNG.
Error
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out ErrorStack:
Error
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
Error
Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
Error
The message status set to FAIL.
Error
Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
Error
Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
Error
Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
File removing and the channel rebooting the channel donu2019t help.
After rebooting the channel:
Error
Received XI System Error. ErrorCode: MESSAGE_NOT_FOUND ErrorText: ErrorStack: XML message not found
Error
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
Error
Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
Error
The message status set to FAIL.
Error
Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
Error
Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
Error
Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
Any ideas?

hi,
try this,
go to Message Monitoring in RWB, delete all the messages with status system error and onhold.
it shd solve your problem
Regards,
Sukarna.chirumamilla.

Similar Messages

SLD server exception: IO error: Read timed out

Hi,
I have deployed the components for NWDI and after that when i am creating the Domain,I am doing update CMS data for creating a Track. I am getting the following error:
SLD server exception: IO error: Read timed out
Can any one help on this.
Thanks
Ravi.S

Hi,
My SLD is a PI 7.0 system and my NWDI is configured on a standalone Java system.
I have done the SLDDataSupplier check, and it connects fine to the SLD.
Also on my http://<hostname>:<port>/devinf/main in the NWDI system, the SLD link points to the right SLD and im able to connect.
Still at the CMS update stage it gives the error -
SLD (URL http://<hostname>:<port>/) server exception: IO error: Read timed out

Read timed out error in IOP Ver 11.1.2.0

Hi,
This is an error we encountered during one of IOP testing for a project. Wondering if someone can help us understand the real issue. Any help is appreciated.
User is using the Analysis Workbench, He has created a scenario, and in one of the cubes, focused on a specific Fiscal quarter using the Add-ins options in Excel.
Then, he selected this quarter and chose 'Show Quarter' option by right clicking on the selected qtr. System then threw out the error:
*Read Timed out. We encountered a problem performing your request. Please notify Oracle, referring to error tag [mtreoi]*
I searched the logs on the server and this is what I found
bash-3.2$ grep 'Read time' *
IOP-8.log:[2012-06-21T17:24:28.718+00:00] [IOPServer_Oracle_IOP_LTV_UAT] [ERROR] [] [oracle.iop.isclient.analyzer.WorkbookServlet] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JWG4aeE1F00073z,0] [APP: IOP_Oracle_IOP_LTV_UAT#11.1.2.0] Error tag [mtreoi]: Cannot process response action /scenario/63:0/sheet/LTV Analysis/address/E4/show/LTV Analysis/levelZoom/FiscalQtr-FiscalQtr-Quarter: com.interlacesystems.util.ISException: Read timed out
IOPServer_Oracle_IOP_LTV_UAT-diagnostic-8.log:[2012-06-21T17:24:28.718+00:00] [IOPServer_Oracle_IOP_LTV_UAT] [ERROR] [] [oracle.iop.isclient.analyzer.WorkbookServlet] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXB5vT4hE1F3z,0] [APP: IOP_Oracle_IOP_LTV_UAT#11.1.2.0] Error tag [mtreoi]: Cannot process response action /scenario/63:0/sheet/LTV Analysis/address/E4/show/LTV Analysis/levelZoom/FiscalQtr-FiscalQtr-Quarter: com.interlacesystems.util.ISException: Read timed out

Any takers for this? Hope I have this in the right forum...
Any one listening (or reading...)???
Thanks
Suma

Read timed out error while opening monitor tab in DataServices

Hello all,
Am getting a "Read timed out" error when I try to open the monitor tab in DataServices admin console for a few jobs only. For several jobs, monitor tab opens just fine. But for a few it doesnt and throws the error mentioned above. Mostly this behaviour is noticed with a job having several workflows and dataflows.
The version of DS used is 12.1.0.0. Tried to gather some info on this issue, but couldnt find any relevant thread. Would really appreciate if anyone could help me with it.
Regards,
Prem

check the following post
http://www.forumtopics.com/busobj/viewtopic.php?t=148213

Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK

Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
Jitender

HI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen.

IO Error: Socket read timed out / IOP_iopinstance1_datasource" closed

Hi ,
Can somebody suggest what could be the probable cause of following errors showing up in IOP log file?
####<Aug 16, 2011 10:49:11 PM PDT> <Info> <Common> <sc-csttest> <IOPServer_iopinstance1> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@357ac2f7> <<anonymous>> <> <0000J7MI9kZFk3vLsYw0yX1EIpFA00002K> <1313560151943> <BEA-000628> <Created "1" resources for pool "IOP_iopinstance1_datasource", out of which "1" are available and "0" are unavailable.>
####<Aug 16, 2011 10:49:12 PM PDT> <Info> <JDBC> <sc-csttest> <IOPServer_iopinstance1> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@357ac2f7> <<anonymous>> <> <0000J7MI9kZFk3vLsYw0yX1EIpFA00002K> <1313560152146> <BEA-001128> <Connection for pool "IOP_iopinstance1_datasource" closed.>
java.sql.SQLRecoverableException: IO Error: Socket read timed out
Thanks
Lokesh

This particular error means your database is down and socket is timedout. Or the query takes so long that the reader timedout -- unlikely.
Also, the general weblogic socket write errors, which you might see sometimes means that the client got disconnected before the server wrote results back. This is harmless

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

OSB Read Timed Out Error

We have configured a business service with JCA DB adapter and uses a select statement to fetch a single record from a database. The select is simple query uses single table with a “where” clause having 5 conditions, like where column1 = ‘value’ and column2 = ‘value’ and column3 = ‘value’ and column4 = ‘value’ and column5 = ‘value’. There are 350 rows in the table and column 1 to 4 has the indexes. When we have done the load testing (5000 messages at the same time), we are getting the below error.
Error : Error Code : BEA-380000 Error Reason : Read timed out
Any info on this issue and its resolution will be helpful.

I doubt if this is an web service connectivity issue.
I have tested this by using
**telnet <hostname> <webservice port no>**
Is there any other issue that i have ignored ?

Read Timed Out Error

Hai,
I write one webservice retrieve the data from maxdb.
If the data is more than 3000 records, when i try to execute the webservice, it shows read timed out error.
How to resolve this error.
please help me.
regards,

Hi
If you are using a webservice client then you can programatically in SEI The Service Endpoint Interface .
Please find the example link in sap help where you set the timeout option
client._setProperty("socketTimeout", "30000");
http://help.sap.com/saphelp_nw04/helpdata/en/04/d2c60e78814516afe7811829f02725/content.htm
hope this helps .please do not forget to reward points
regards
rajesh kr

WebLogic 11g data source connection pooling failed with IO error:socket read timed out.

Hi all,
We encountered IO Error: Socket read timed out( <Received exception while creating connection for pool "DS_1": IO Error: Socket read timed out> ) during the creation of data sources in WebLogic 11g. Manual data source testing seems to indicate intermittent connection and the server seems to take a long time to start up with multiple IO errors. We increased the timeout at the database side but it does not seems to help. The database is 11g (11.2.0.3). The database services and listener are up which does not indicate that the database instance is down.

This particular error means your database is down and socket is timedout. Or the query takes so long that the reader timedout -- unlikely.
Also, the general weblogic socket write errors, which you might see sometimes means that the client got disconnected before the server wrote results back. This is harmless

Oracle RTD Integration Point Invoke: Read Timed Out Error

Hi All,
We are getting the Read Timed Out Exception while invoking the integration points in Oracle RTD after running the batch job.
Till the model doesnt have any data or very less data, we are able to invoke the integration points.
But after executing the batch job even with as less as 100 records we start getting the timeout error when the integration points are invoked explicitly.
2011-07-05 19:07:43,345 ERROR [EntryPointHelper] java.rmi.RemoteException: ; nested exception is:
     com.sigmadynamics.exception.SDRuntimeException
     at com.sigmadynamics.server.rtis.LocalClient.invoke(LocalClient.java:123)
     at com.sigmadynamics.struts.helpers.testview.EntryPointHelper.getResponse(EntryPointHelper.java:100)
     at sun.reflect.GeneratedMethodAccessor150.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.taglibs.standard.lang.jstl.ArraySuffix.evaluate(ArraySuffix.java:317)
     at org.apache.taglibs.standard.lang.jstl.ComplexValue.evaluate(ComplexValue.java:146)
     at org.apache.taglibs.standard.lang.jstl.ELEvaluator.evaluate(ELEvaluator.java:242)
     at org.apache.taglibs.standard.lang.jstl.ELEvaluator.evaluate(ELEvaluator.java:201)
     at org.apache.taglibs.standard.lang.jstl.Evaluator.evaluate(Evaluator.java:138)
     at org.apache.taglibs.standard.lang.jstl.Evaluator.evaluate(Evaluator.java:166)
     at org.apache.taglibs.standard.lang.support.ExpressionEvaluatorManager.evaluate(ExpressionEvaluatorManager.java:112)
     at org.apache.taglibs.standard.tag.el.core.ForEachTag.evaluateExpressions(ForEachTag.java:191)
     at org.apache.taglibs.standard.tag.el.core.ForEachTag.doStartTag(ForEachTag.java:102)
     at application.application__test__overview._jspService(_application__test__overview.java:663)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.sigmadynamics.struts.SDJSPAction.authenticatedExecute(SDJSPAction.java:184)
     at com.sigmadynamics.struts.RequiresAuthenticationAction.execute(RequiresAuthenticationAction.java:41)
     at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
     at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
     at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
     at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
     at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at com.sigmadynamics.workbench.DynamicContentFilter.doFilter(DynamicContentFilter.java:29)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at com.sigmadynamics.workbench.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java:34)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at com.sigmadynamics.workbench.SecurityContextFilter.doFilter(SecurityContextFilter.java:37)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.sigmadynamics.exception.SDRuntimeException
     at EDU.oswego.cs.dl.util.concurrent.FutureResult.timedGet(FutureResult.java:149)
     at com.sigmadynamics.server.rtis.LocalClient.invoke(LocalClient.java:104)
     ... 57 more
Caused by: EDU.oswego.cs.dl.util.concurrent.TimeoutException
     ... 59 more
I have tried flushing the statistics as well as increasing the IntegrationPointGuaranteed RequestTimeout to 3000.
But its not helping.
Only for the empty model the integration points get invoked explicity from the test view or the interactive integration map or through the web service. Once executed the batch job I just get a Timeout error.
When i try to set IntegrationPointGuaranteed RequestTimeout to 0 and invoke the integration point it hangs.
Wat could be the issue/resolution?
Regards,
Supriya

Hi Vamsi,
Am experiencing the same SDTimeOutException.
And by the way, the Siebel Application Version We are using to integrate to RTD is 8.1.
Can you please throw some light on how to get this Exception resolved?
Thanks,
Hariharan

XI Repository Export CMS Read timed out error

when iam exporting the objects the export fails with the message..Sent on 12/14/07 at 9:04 PM: Unable to establish connection to CMS server http://servername:51000. Unable to transfer the following transport lists: Export list for SWCV (send time = 12/14/07 9:02 PM, component = xxxx, ID = xsdsdsdsd) Details: Read timed out Check the availability of the CMS and the user authorizations and send the transport request again if necessary
Can any one please advise...
Thanks for your help!
Larry.

Thanks Gabriel,
But the issue you mentioned is regarding the authorization...but the one which Iam facing is regarding the Time out issue...I have done the export before with whatever authorization iam having...The problem Iam having is when i tried to export more number of objects ..If i try exporting individually Iam able to do that...
Please advise!
Thanks in advance!

Data Federator - Read timed out

Hi,
I'm using Data Federator XI 3.0 SP2. I have a datasource connecting to a web service. The web service may return take a long time to do heavy processing, etc., before returning any data. If I call the web service via Data Federator, I will get the following error
Exception was thrown while executing a query on Data Federator Query Server.
An exception occurred when querying Data Federator Query Server.
    [Data Federator Driver][Server]
[Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
      [Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
        [Wrapper /TEST/sysadmin/sources/draft/ReturnInputAsOutput]HTTP input/output exception: Read timed out
          HTTP input/output exception: Read timed out
I'm guessing that the Data Federator query timed out because the web service takes a long time to response, is it not? If this is the case, how do I increase timeout value? If this is not the case, then what does the error mean and how do I resolve it?
Thanks.
Edited by: Chih Hui Wan on Nov 19, 2009 9:15 AM

Hi Dayanand,
For testing purpose, I created a small simple web service with only one operation that sleep for more than two minutes before returning a string. I called this web service operation from Data Federator. After waiting for a while, I got the "Read timed out" error
Regards,
Chih Hui

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

Error: Read timed out&MESSAGE_NOT_FOUND.

Similar Messages

Maybe you are looking for