Error reading data from static cursor cache.

Hi,
Does anyone know what causes this error below. It just started happening out of the blue. I'm running Apache Tomcat 4.1 on Win 2000 server with MS SQL Server 2000 database.
Error:
java.sql.SQLException: [Microsoft][SQLServer JDBC Driver]Error reading data from static cursor cache.
Thanks,
TR

hi,
i had a similar sort of error, something along the lines of "error setting up static cursor cache" using the SQL JDBC drivers on Win2K. i deleted the file entries in the TEMP folder of c:\documents and settings\<user>\Local Settings\TEMP and everything was cool after it. i'm not sure what the exact issue is (probably something like maximum folder size had been reached). i ran the FileMon utility from www.sysinternals.com and it reported a DISK_FULL error on a temporary file being read by the process. to cut a long story short, everything is NOW cool.
cheer,
dara

Similar Messages

ORA-13773: insufficient privileges to select data from the cursor cache

We are trying to create STS using the below query:
exec sys.dbms_sqltune.create_sqlset(sqlset_name => 'TEST_STS', -
sqlset_owner => 'SCOTT');
The below procedure will load sql starting with 'select /*MY_CRITICAL_SQL*/%' from cursor cache into STS TEST_STS.
DECLARE
stscur dbms_sqltune.sqlset_cursor;
BEGIN
OPEN stscur FOR
SELECT VALUE(P)
FROM TABLE(dbms_sqltune.select_cursor_cache(
'sql_text like ''select /*MY_CRITICAL_SQL*/%''',
null, null, null, null, null, null, 'ALL')) P;
dbms_sqltune.load_sqlset(sqlset_name => 'TEST_STS',
populate_cursor => stscur,
sqlset_owner => 'SCOTT');
END;
We were getting the following error: ORA-13761: invalid filter
After granting the below privileges to the user we are getting the below error:
Err msg:
ERROR at line 1:
ORA-13773: insufficient privileges to select data from the cursor cache
ORA-06512: at "SYS.DBMS_SQLTUNE", line 2957
ORA-06512: at line 10
For SQL Tuning Sets:
GRANT ADMINISTER ANY SQL TUNING SET TO scott;
For Managing SQL Profiles:
GRANT CREATE ANY SQL PROFILE TO scott;
GRANT ALTER ANY SQL PROFILE TO scott;
GRANT DROP ANY SQL PROFILE TO scott;
For SQL Tuning Advisor:
GRANT ADVISOR TO scott;
Others:
GRANT SELECT ON V_$SQL TO SCOTT;
GRANT SELECT ON V_$SQLAREA TO SCOTT;
GRANT SELECT ON V$SQLAREA_PLAN_HASH TO SCOTT;
GRANT SELECT ON V_$SQLSTATS TO SCOTT;
grant select on sys.DBA_HIST_BASELINE to SCOTT;
grant select on sys.DBA_HIST_SQLTEXT to SCOTT;
grant select on sys.DBA_HIST_SQLSTAT to SCOTT;
grant select on sys.DBA_HIST_SQLBIND to SCOTT;
grant select on sys.DBA_HIST_OPTIMIZER_ENV to SCOTT;
grant select on sys.DBA_HIST_SNAPSHOT to SCOTT;
Any info from your end to resolve the issue will be of great help.
Thanks

What is the alert log reporting. Are you seeing any other errors than these in the alert log too?

HTTP-500 Error Reading Data from Client!!

I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, Nicky

Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till!

Error reading data from the MS Dos Console.

Hi,
We have a legacy application which is launched via a 3rd-party Telnet Server - the app acts as a remote shell for an RF device. The system has been functioning for many years but now we have migrated to Server 2012 the system no longer launches.
The RF device successfully connects to the telnet server, logs-in with embedded credentails but drops the connection when the shell application is launched.
The server has the following Application error
Error reading data from the MS Dos Console.
The pipe has been ended. 109 (0x6d)
The application can successfully be launched locally outside of the shell on the server. The error is reproducable across RF devices and desktop telnet connections.
The firewalls are off.
Are there some additional protections in Server 2012 which would cause the pipe-based link to be stopped when launching the exe? Am I missing something? The 3rd-party telnet server is certified for Server 2012.
Thnak you

I'd ask in the
Windows Server General Forum, or ask the third party vendor.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
My Blog: http://unlockpowershell.wordpress.com
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

Error reading data from CLOB column into VARCHAR2 variable

Hi all,
Am hitting an issue retrieving data > 8K (minus 1) stored in a CLOB column into a VARCHAR2 variable in PL/SQL...
The "problem to be solved" here is storing DDL, in this case a "CREATE VIEW" statement, that is longer than 8K for later retrieval (and execution) using dynamic SQL. Given that the EXECUTE IMMEDIATE statement can take a VARCHAR2 variable (up to 32K(-1)), this should suffice for our needs, however, it seems that somewhere in the process of converting this VARCHAR2 text to a CLOB for storage, and then retrieving the CLOB and attempting to put it back into a VARCHAR2 variable, it is throwing a standard ORA-06502 exception ("PL/SQL: numeric or value error"). Consider the following code:
set serveroutput on
drop table test1;
create table test1(col1 CLOB);
declare
cursor c1 is select col1 from test1;
myvar VARCHAR2(32000);
begin
myvar := '';
for i in 1..8192 loop
myvar := myvar || 'a';
end loop;
INSERT INTO test1 (col1) VALUES (myvar);
for arec in c1 loop
begin
myvar := arec.col1;
dbms_output.put_line('Read data of length ' || length(myvar));
exception when others then
dbms_output.put_line('Error reading data: ' || sqlerrm);
end;
end loop;
end;
If you change the loop upper bound to 8191, all works fine. I'm guessing this might have something to do with the database character set -- we've recently converted our databases over to UTF-8, for Internationalizion support, and that seems to have changed underlying assumptions regarding character processing...?
As far as the dynamic SQL issue goes, we can probably use the DBMS_SQL interface instead, with it's EXECUTE procedure that takes a PL/SQL array of varchar2(32K) - the only issue there is reading the data from the CLOB column, and then breaking that data into an array but that doesn't seem insurmountable. But this same basic issue (when a 9K text block, let's say, turns into a >32K block after being CLOBberred) seems to comes up in other text-processing situations also, so any ideas for how to resolve would be much appreciated.
Thanks for any tips/hints/ideas...
Jim

For those curious about this, here's the word from Oracle support (courtesy of Metalinks):
RESEARCH
========
Test the issue for different DB version and different characterset.
--Testing the following PL/SQL blocks by using direct assignment method(myvar := arec.col1;) on
different database version and different characterset.
SQL>create table test1(col1 CLOB);
--Inserting four CLOB data into test1.
declare
myvar VARCHAR2(32767);
begin
myvar := RPAD('a',4000);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('a',8191);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('b',8192);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('c',32767);
INSERT INTO test1 (col1) VALUES (myvar);
commit;
end;
--Testing the direct assignment method.
declare
cursor c1 is select col1, length(col1) len1 from test1;
myvar VARCHAR2(32767);
begin
for arec in c1 loop
myvar := arec.col1;
--DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar);
dbms_output.put_line('Read data of length: ' || length(myvar));
end loop;
end;
The following are the summary of the test results:
===================================
1. If the database characterset is WE8ISO8859P1, then the above direct assignment
method(myvar := arec.col1;) works for database version 9i/10g/11g without any
errors.
2. If the database characterset is UTF8 or AL32UTF8, then the above direct assignment method(myvar := arec.col1;) will generate the "ORA-06502:
PL/SQL: numeric or value error" when the length of the CLOB data is greater
than 8191(=8K-1). The same error can be reproduced across all database versions
9i/10g/11g.
3. Using DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar) method to read CLOB data into a VARCHAR2 variable works for both WE8ISO8859P1 and UTF8
characterset and for all database versions.
So - it seems as I'd surmised, UTF8 changes the way VARCHAR2 and CLOB data is handled. Not too surprising, I suppose - may you all be lucky enough to be able to stay away from this sort of issue. But - the DBMS_LOB.READ workaround is certainly sufficient for the text processing situations we find ourselves in currently.
Cheers,
Jim C.

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

Error reading data from infocube using RSDRI_INFOPROV_READ

hi,
I am trying to write a Function module to read data from an Infocube.
This is a remote enabled Function module and is working fine if I make a few minor changes and customize it to read data from a case of a DSO.
However, for cube, code is showing no syntax errors, but on execution is not returning any data also.
I have tried defining E_T_data as E/F/V tables of the cube, but still not getting any output.
Probably this is related to structure of E_T_data only. . . .
Can anyone please guide me on this.
regards
Parikshit.

Hello,
E_T_DATA needs to defined as an internal table with all the fields you need as an O/P from the infocube you are trying to fetch data from. Just make sure, you keep the name of the fields same as Name of the infoobjects in the Cube. So just define e_t_data Standard internal table with all fields you want to fetch from Infocube (name of fields same as infoobject name).
Also fill in the g_th_sfc, g_th_sfk internal tables with the list of characteristics and Keyfigues you wanna o/p with chanm/kyfnm field populated with exact name of infoobject and chaalias/kyfalias same as defined in g_t_data (good to keep both same).
Thanks
Edited by: Sandesh Shetty on Jul 29, 2008 2:26 PM

Error reading data from Info Provider

Hi Folks,
I am executing a report and am getting the following error message:
Error reading data of Info Provider.
System Error: Whole Number Overflow on Multiplication.
The infoprovider being read is a Virtual Info provider Based on DTP/3.x InfoSource.
Let me know what could be the potential problem here ? How would I fix such issues.
Regards
Arjun

Hello,
There is some problem in data. Check if in transformation u have any formulas or routines.
regards,
Shashank

Read data from STATIC internal table during round trip in DO_PREPARE_OUTPUT

Dear Gurus
I have a requirement where I need to select some data from the database table BUT_HIER_NODE_D.
After SELECTING this data to an internal table (say ITAB), I am displaying this data in a table view. I was able to achive this functionality by putting some code in the DO_PREPARE_OUTPUT method.
Now according to my requirement, after the above data has been displayed on the screen initially, the user will click on any row. After clicking on a particular row, I need to capture the document number on that particular row and need to display all its child document numbers in a separate table. I am able to achive this functionality also.
Initially I am not sure of how to READ the same internal table (ITAB) again and again by avoiding the SELECT query upon each round trip (between CRM and Web).
After some research, I understand that I might have to use STATIC internal table to store the data during the
initial SELECT. This way, upon each round trip, I can READ the data from the same internal table.
My question: But now, when I tried to create a STATIC internal table in DO_PREPARE_OUTPUT, it is not allowing me to declare this table because DO_PREPARE_OUTPUT method is a INSTANCE method.
I didn't find any STATIC methods in the IMPL class of the view.
I would really appreciate if somebody can help me on how to proceed further.
Thanks
Raj

Hi Bharathy / Adil / Masood
Thank you very much for the replies. I declared a static method inside the IMPL class and I was calling this method inside the DO_PREPARE_OUTPUT method. Looks like it is working fine for me...will comeback if I had any further issues.
Masood
As per my requirement, I need to Select the data into the internal table during the very first step, then I need to continuosly read the data from this internal table upon every round trip. So I am not sure if I would be able to use the method DO_INIT_CONTEXT. Because I need a method which will trigger upon each round trip and will also hold the data of this internal table. So right now, the only option for me is DO_PREPARE_OUTPUT method.
Plz let me know if am doing in the right way.
Thanks
Raj

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Static lookup lists:read data from a Java *.properties file

Hi
i need to make static lookup lists i am using read data from a Java *.properties file
i am using the Class "PropertyFileBasedLookupViewObjectImpl" that wrote by Steve Muench in ToyStore.
but i need to use the default language for that i update the loadDataFromPropertiesFile()
method to find the correct properties file
String temp=Locale.getDefault().getLanguage();
String propertyFile =
getViewDef().getFullName().replace('.', '/')+"_"+temp+ ".properties";
the problem:
For English(TEST_en.properties) it is good and working
For Arabic(TEST_ar.properties) read from correct file _ar.properties
but the dispaly character is wrong
When Debug
In the File 1=دمشق
In debug 1=/u32423

Depending on your use case you can either use a programmatic VO or directly expose the JV class as a data control.
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_36/jdtut_11r2_36.html

Error in Reading data from a xml file in ESB

Hi,
i created a inbound file adapter service which reads data from a xml file and passes it to the routing service and from there updates to the database.....
(everything created in jdeveloper)
But i am getting error....it is not getting updated to the database...when i check the database(select * from table) its showing one row selected but i couldnt find the data....
Transformation mapping also i did...
i think may be some error in reading the data from the xml file but not so sure.....
please reply to this mail as soon as possible its very urgent

Michael R wrote:
The target table will be created when you execute the interface, if you set the option on the flow tab as instructed in step #6 of the "Setting up ODI Constraint on CLIENT Datastore" Section.
Option Value
CREATE_TARG_TABLE trueHi Michel,
This was not my required answer.I am sorry that I was unable to clarify my question.Actually
+This project executed successfully with some warning.Target Table is automatically created in database and also populated with data.But when I right-click Target Datastore(in >Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table.I get some error like this:-...+This above line is the result of my project my problem is
when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that already inserted in the target table.Is not shown by the view data operation.
I meant to say I am facing this error
At the10(1010 written) step of
Creating a New ODI Interface to Perform XML File to RDBMS Table Transformation
wehre it says
Open the Interface tab. Select Mapping tab, right-click Target Datastore - CLIENT, and then select Data. View Data inserted in the target table. Close Data Editor. Close the tabs...
In my case when I use my sqldeveloper I can see data successfully inserted in my target table and also in error table (data that can't satisfy the constraint) .But I was unable to check this by following the above mentioned 10 th step and got this error.
Thanks

Error when reading data from socket

Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?

Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit

Unable to read data from Analog Devices 6b11 module - error code 1240

Hi everyone,
I'm trying to read data from a thermocouple with an AD 6B11 module in an AD 6BP16-1 backplane using RS232 serial. I've been following this guide:
http://digital.ni.com/public.nsf/allkb/8C77E5E52B4A27968625611600559421
Everything seems to work out well until step 13, where I call the "AD6B Input Module - Read Data.VI". I get an error code 1240 stating something like "invalid parameter or unable to read instrument".
Has anyone got any experience with this error or suggestions to fixing it?
Thanks in advance!

That user guide is 20+ years old. The serial functions from that day used 0 for com 1, 1 for com 2, etc. Make sure you have the correct one selected. Please provide the exact error message instead of 'something like'.

Error reading data from static cursor cache.

Similar Messages

Maybe you are looking for