Error reading data of infoprovider

My query contains no data when i execute the bex analyzer. The popup message error was
" Error reading data of infoprovider "
" Error while reading data;navigation is possible"
please advise

Hi,
Check following:
1. If there is any data in the cube.
2. If the cube is having any authorization InfoObjects which are not assigned to you.
3. The query returns the data for the filters and restrictions that you might have specified in Query Designer.
4. Test your query in RSRT to check if actually returns any data.
Regards,
Deepti

Similar Messages

Interactive Reporting:Error reading data of InfoProvider /CRMBW/CSAL_C01

Hi Forum,
I configured an interactive reporting to read interaction record data.
When I execute the reporting, I am getting the following error message:
+Error reading the data of InfoProvider /CRMBW/CSAL_C01+
+No destination exists to source system YYYCLNT999+
The RFC mentioned in the error message is not the correct one. But I checked the configuration in RSA1 and the RFC mentioned there is the correct one. So, I think I am missing a customizing that is pointing to the wrong client...
Any idea ?
Thanks a lot and best regards.

Hi,
first you should check the overall configuration. Go to your CRM client and run transaction /CRMBW/CONFIG_WIZARD. If there are errors or warnings, solve them step by step. The transaction should be self-explaining but may require some expertise (the documentation provided should help, though).
Best regards

Error reading data from Info Provider

Hi Folks,
I am executing a report and am getting the following error message:
Error reading data of Info Provider.
System Error: Whole Number Overflow on Multiplication.
The infoprovider being read is a Virtual Info provider Based on DTP/3.x InfoSource.
Let me know what could be the potential problem here ? How would I fix such issues.
Regards
Arjun

Hello,
There is some problem in data. Check if in transformation u have any formulas or routines.
regards,
Shashank

Error reading data from CLOB column into VARCHAR2 variable

Hi all,
Am hitting an issue retrieving data > 8K (minus 1) stored in a CLOB column into a VARCHAR2 variable in PL/SQL...
The "problem to be solved" here is storing DDL, in this case a "CREATE VIEW" statement, that is longer than 8K for later retrieval (and execution) using dynamic SQL. Given that the EXECUTE IMMEDIATE statement can take a VARCHAR2 variable (up to 32K(-1)), this should suffice for our needs, however, it seems that somewhere in the process of converting this VARCHAR2 text to a CLOB for storage, and then retrieving the CLOB and attempting to put it back into a VARCHAR2 variable, it is throwing a standard ORA-06502 exception ("PL/SQL: numeric or value error"). Consider the following code:
set serveroutput on
drop table test1;
create table test1(col1 CLOB);
declare
cursor c1 is select col1 from test1;
myvar VARCHAR2(32000);
begin
myvar := '';
for i in 1..8192 loop
myvar := myvar || 'a';
end loop;
INSERT INTO test1 (col1) VALUES (myvar);
for arec in c1 loop
begin
myvar := arec.col1;
dbms_output.put_line('Read data of length ' || length(myvar));
exception when others then
dbms_output.put_line('Error reading data: ' || sqlerrm);
end;
end loop;
end;
If you change the loop upper bound to 8191, all works fine. I'm guessing this might have something to do with the database character set -- we've recently converted our databases over to UTF-8, for Internationalizion support, and that seems to have changed underlying assumptions regarding character processing...?
As far as the dynamic SQL issue goes, we can probably use the DBMS_SQL interface instead, with it's EXECUTE procedure that takes a PL/SQL array of varchar2(32K) - the only issue there is reading the data from the CLOB column, and then breaking that data into an array but that doesn't seem insurmountable. But this same basic issue (when a 9K text block, let's say, turns into a >32K block after being CLOBberred) seems to comes up in other text-processing situations also, so any ideas for how to resolve would be much appreciated.
Thanks for any tips/hints/ideas...
Jim

For those curious about this, here's the word from Oracle support (courtesy of Metalinks):
RESEARCH
========
Test the issue for different DB version and different characterset.
--Testing the following PL/SQL blocks by using direct assignment method(myvar := arec.col1;) on
different database version and different characterset.
SQL>create table test1(col1 CLOB);
--Inserting four CLOB data into test1.
declare
myvar VARCHAR2(32767);
begin
myvar := RPAD('a',4000);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('a',8191);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('b',8192);
INSERT INTO test1 (col1) VALUES (myvar);
myvar := RPAD('c',32767);
INSERT INTO test1 (col1) VALUES (myvar);
commit;
end;
--Testing the direct assignment method.
declare
cursor c1 is select col1, length(col1) len1 from test1;
myvar VARCHAR2(32767);
begin
for arec in c1 loop
myvar := arec.col1;
--DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar);
dbms_output.put_line('Read data of length: ' || length(myvar));
end loop;
end;
The following are the summary of the test results:
===================================
1. If the database characterset is WE8ISO8859P1, then the above direct assignment
method(myvar := arec.col1;) works for database version 9i/10g/11g without any
errors.
2. If the database characterset is UTF8 or AL32UTF8, then the above direct assignment method(myvar := arec.col1;) will generate the "ORA-06502:
PL/SQL: numeric or value error" when the length of the CLOB data is greater
than 8191(=8K-1). The same error can be reproduced across all database versions
9i/10g/11g.
3. Using DBMS_LOB.READ(arec.col1, arec.len1, 1, myvar) method to read CLOB data into a VARCHAR2 variable works for both WE8ISO8859P1 and UTF8
characterset and for all database versions.
So - it seems as I'd surmised, UTF8 changes the way VARCHAR2 and CLOB data is handled. Not too surprising, I suppose - may you all be lucky enough to be able to stay away from this sort of issue. But - the DBMS_LOB.READ workaround is certainly sufficient for the text processing situations we find ourselves in currently.
Cheers,
Jim C.

Error reading data from static cursor cache.

Hi,
Does anyone know what causes this error below. It just started happening out of the blue. I'm running Apache Tomcat 4.1 on Win 2000 server with MS SQL Server 2000 database.
Error:
java.sql.SQLException: [Microsoft][SQLServer JDBC Driver]Error reading data from static cursor cache.
Thanks,
TR

hi,
i had a similar sort of error, something along the lines of "error setting up static cursor cache" using the SQL JDBC drivers on Win2K. i deleted the file entries in the TEMP folder of c:\documents and settings\<user>\Local Settings\TEMP and everything was cool after it. i'm not sure what the exact issue is (probably something like maximum folder size had been reached). i ran the FileMon utility from www.sysinternals.com and it reported a DISK_FULL error on a temporary file being read by the process. to cut a long story short, everything is NOW cool.
cheer,
dara

HTTP-500 Error Reading Data from Client!!

I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, Nicky

Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till!

Error reading data from the MS Dos Console.

Hi,
We have a legacy application which is launched via a 3rd-party Telnet Server - the app acts as a remote shell for an RF device. The system has been functioning for many years but now we have migrated to Server 2012 the system no longer launches.
The RF device successfully connects to the telnet server, logs-in with embedded credentails but drops the connection when the shell application is launched.
The server has the following Application error
Error reading data from the MS Dos Console.
The pipe has been ended. 109 (0x6d)
The application can successfully be launched locally outside of the shell on the server. The error is reproducable across RF devices and desktop telnet connections.
The firewalls are off.
Are there some additional protections in Server 2012 which would cause the pipe-based link to be stopped when launching the exe? Am I missing something? The 3rd-party telnet server is certified for Server 2012.
Thnak you

I'd ask in the
Windows Server General Forum, or ask the third party vendor.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
My Blog: http://unlockpowershell.wordpress.com
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ("6B61726C6D69747363686B65406D742E6E6574"-split"(?<=\G.{2})",19|%{[char][int]"0x$_"})

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

Error reading data of virtual provider.

Hi,
I am receiving the below error message when reporting on a virtual provider/remote cube and unable to identify the root cause. Same error message is displayed when trying to view content of virtual provider/remote cube via listcube T-code or report created directly on remote cube or report created on a multiprovider which has this virtual provider.
Error Message:
An exception has occured
Error in substep
Error in substep
Error reading the data of Infoprovider
Thanks and Regards
Vikram Reddy

Hi Vishwa,
The extraction checker on the data source in RSA3 in R3 is fine. Can you please ellobrate on how to check if the custom view on the table GLPCA is active or not.
Just to clarify, below steps have a been successfully carried in R3 and BW:
1. R3- Creation of view on table GLPCA
2. R3- Creation of reconciliation direct access data source based on this view
3. BW- Replication of this data source in BW and activation of data source.
4. BW- Linked the virtual provider with the data source through transformation and created and activated a DTP process.
5. BW- Context menu of the virtual provider and clicked on activate direct access and save the selection.
After all these steps when i try reading data through the virtual provider, i the recieve the error msg.
Thanks and Regards
Vikram Reddy

Error reading data from Infocube using shell script.

Dear all ,
I am facing a problem while reading data from an infocube using a shell script.
The details are as follows.
One of the shell script reads the data from the infocube to extract files with the values.
The tables used for extraction by the shell script are :
from   SAPR3."/BIC/F&PAR_CUBE.COPA"     FCOPA,
       SAPR3."/BIC/D&PAR_CUBE.COPAU"    COPAU,
       SAPR3."/BIC/D&PAR_CUBE.COPAP"    COPAP,
       SAPR3."/BIC/D&PAR_CUBE.COPA1"    CCPROD,
       SAPR3."/BIC/D&PAR_CUBE.COPA2"    CCCUST,
       SAPR3."/BIC/D&PAR_CUBE.COPA3"    COPA3,
       SAPR3."/BIC/D&PAR_CUBE.COPA4"    COPA4,
       SAPR3."/BIC/D&PAR_CUBE.COPA5"    COPA5,
       SAPR3."/BIC/MCCPROD"      MCCPROD,
       SAPR3."/BIC/SCCPROD"      SCCPROD,
       SAPR3."/BIC/MCCCUSTOM"    MCCCUSTOM,
       SAPR3."/BIC/SCCCUSTOM"    SCCCUSTOM,
       SAPR3."/BIC/SORGUNIT"     SORGUNIT,
       SAPR3."/BIC/SUNIMOYEAR"   SUNIMOYEAR,
/*     SAPR3."/BI0/SFISCPER"     SFISCPER, */
       SAPR3."/BI0/SREQUID"      SREQUID,
       SAPR3."/BI0/SCURRENCY"    SCURRENCY,
       SAPR3."/BIC/SSCENARIO"    SSCENARIO,
       SAPR3."/BIC/SSOURCE"      SSOURCE
The problem is that the file generation by this script (after reading the data from teh infocube) is taking an unexpected time of 2 hours which needs to be maximum 10 mins only.
I used RSRV to get the info about these tables for the infocube:
Entry '00046174', SID = 37 in SID table is missing in master data table /BIC/MCUSLEVEL2
Entry '00081450', SID = 38 in SID table is missing in master data table /BIC/MCUSLEVEL2
and so on for SID = 39 and SID = 35 .
Checking of SID table /BIC/SCUSLEVEL2 produced errors
Checking of SID table /BIC/SCUSLEVEL3 produced errors
Can you please let me know if this can be a reason of delay in file generation (or reading of data from the infocube).
Also , Please let me know how to proceed with this issue.
Kindly let me know for more information, if required.
Thanks in advance for your help.
-Shalabh

Hi ,
In continuation with searching the solution to the problem , I could manage to note a difference in the partition of the Fact table of the infocube.
Using SE14 -> Storage Parameters, I could find the partition done for the fact table as :
PARTITION BY: RANGE
COLUMN_LIST: KEY_ABACOPA
and subsequently there are partitions with data in it.
I need to understand the details of these partitions .
Do they correspond to each requests in the infocube(which may not be possible as there are 13 requests in infocube and much more partitions).
Most importantly, since this partition is observed for this onfocube only and not for other infocubes, it is possible that it can be a reason for SLOW RETRIEVAL of data from this ionfocube( not sure since the partition is used to help in fast retreival of data from the infocubes).
Kindly help.
Thanks for your co-operation in advance.
-Shalabh

Error reading data from infocube using RSDRI_INFOPROV_READ

hi,
I am trying to write a Function module to read data from an Infocube.
This is a remote enabled Function module and is working fine if I make a few minor changes and customize it to read data from a case of a DSO.
However, for cube, code is showing no syntax errors, but on execution is not returning any data also.
I have tried defining E_T_data as E/F/V tables of the cube, but still not getting any output.
Probably this is related to structure of E_T_data only. . . .
Can anyone please guide me on this.
regards
Parikshit.

Hello,
E_T_DATA needs to defined as an internal table with all the fields you need as an O/P from the infocube you are trying to fetch data from. Just make sure, you keep the name of the fields same as Name of the infoobjects in the Cube. So just define e_t_data Standard internal table with all fields you want to fetch from Infocube (name of fields same as infoobject name).
Also fill in the g_th_sfc, g_th_sfk internal tables with the list of characteristics and Keyfigues you wanna o/p with chanm/kyfnm field populated with exact name of infoobject and chaalias/kyfalias same as defined in g_t_data (good to keep both same).
Thanks
Edited by: Sandesh Shetty on Jul 29, 2008 2:26 PM

Error reading data after submit.

Hi All,
I have a problem getting some data after i submit a standard report FPO4.
Here the issue is with a file that is getting created by a dynamic report created and called internally by a report on the same path every time dynamically. say (/devabap/if/out/XXXX.0 for the first time and the next time we run the report file name would be /devabap/if/out/XXXX.1 etc.2,3,4,5,). I am now using the FM: FILE_GET_NAME to get the name and then proceeding further to get my output.
But when i am trying to use the above function module for a single run i am getting the correct result as ther is only one file present in the path.If i run the same report with different variants parallely in background then in the application server there are there are two or more files already created for two different run's as said above ( .0 and .1) the logic is such that i have to get the latest file and so a wrong file is getting picked up at the time of parallel run.
Note: When i Submit the transaction the ouput screen along with the data contains the File path & File Name as said above.I am trying to get the file name from the submit screen as the file is generated dynamically. For change in the instance (run) again there will be change in the file name. So system is not identifying the correct file. The dynamic program that is getting created and placing the file in the path is opened in another session (NEW) and hence i am not a ble to use any of the methods like ( SET/GET Parameters) also the IMPORT/EXPORT statements.
The flow of the execution is (Program A --> Standard Transaction B --> Dynamically created Program C --> File is getting created) . Here i want the file name that program c is creating in my zprogram A.
Could any one please advise?
Regards,
Vijay

Hi All,
I have a problem getting some data after i submit a standard report FPO4.
Here the issue is with a file that is getting created by a dynamic report created and called internally by a report on the same path every time dynamically. say (/devabap/if/out/XXXX.0 for the first time and the next time we run the report file name would be /devabap/if/out/XXXX.1 etc.2,3,4,5,). I am now using the FM: FILE_GET_NAME to get the name and then proceeding further to get my output.
But when i am trying to use the above function module for a single run i am getting the correct result as ther is only one file present in the path.If i run the same report with different variants parallely in background then in the application server there are there are two or more files already created for two different run's as said above ( .0 and .1) the logic is such that i have to get the latest file and so a wrong file is getting picked up at the time of parallel run.
Note: When i Submit the transaction the ouput screen along with the data contains the File path & File Name as said above.I am trying to get the file name from the submit screen as the file is generated dynamically. For change in the instance (run) again there will be change in the file name. So system is not identifying the correct file. The dynamic program that is getting created and placing the file in the path is opened in another session (NEW) and hence i am not a ble to use any of the methods like ( SET/GET Parameters) also the IMPORT/EXPORT statements.
The flow of the execution is (Program A --> Standard Transaction B --> Dynamically created Program C --> File is getting created) . Here i want the file name that program c is creating in my zprogram A.
Could any one please advise?
Regards,
Vijay

DBMAN350 Error reading MultiCube data over aggregate

Hi, I have handed down multicube over a Cube, DSO, and IP Aggregate. When I try to display the data using a LISTCUBE I get errors. I just noticed I get the same error in my development box.
1. Error reading the data of InfoProvider Z_C017_A8 Message no. DBMAN305
Diagnosis - Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure - Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
2. Reading from InfoProvider Z_C017_A8 is not permitted Message no. RSPLS801
Diagnosis - Cannot read data from InfoProvider Z_C017_A8 here.
System Response - The system has cancelled the read operation.
Procedure - Use InfoProvider Z_P_C017 for the read operation here
I am suspecting this is why data from the planning aggregate is not showing up on my query, but the query doesn't return an error like listcube does. It is OK to have planning aggregates in a multiprovider I am assuming because it allows it.
Any ideas why this error is appearing?
I already searched SDN and OSS, but nothing relevant appears.

Hi Kenneth,
I found this notes which could be relevant for you:
Error when reading RemoteCubes in MultiProviders
SAP Note Number: [1011321|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
DBMAN 305: Error when reading data of InfoProvider ...$N
SAP Note Number: [1051291|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler]
Additional this thread:
Remote cube - uncaught exception
Regards
Andreas

Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12

Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.

Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind

Error reading the data of InfoProvider /APC/FINGLV01

Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AM

At this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle

Error reading data of infoprovider

Similar Messages

Maybe you are looking for