Error reading IDoc Metadata from CRM 5.0 (Basis 7.0) through XI 3.0

We are not able to generate the IDoc metadata from XI 3.0 through IDX2 for port/RFC destination pointing to SAP CRM 5.0 which runs on the Basis 7.0 Web application server.
Has anyone run into this issue? We get the dialog box with information "I::000" Message no. 000. The metadata is not generated at all.
We have no problem generating IDoc metadata for other SAP systems including 6.40 and 4.6C basis layers. Is there something different with 7.0 Basis?
Thanks,
Jay Malla
SAP XI Consultant
Licensed To Code

Hi Renjith,
Thanks for the suggestion. We've already tried that out - the RFC call IDX_STRUCTURE_GET works from SE37 using the RFC destination that we have defined for the CRM system which is referenced in the port. We can debug from the XI system into the CRM system and the data is returned correctly. We can also generate the IDoc schema from the Integration Builder Repository.
However, we cannot generate the metadata from IDX2. If we point the port in IDX1 to another RFC destination for a non Basis 7.0 system, the metadata generation works. So it seems that something is strange regarding generating the IDoc metadata for Basis 7.0 systems.
Regards,
Jay

Similar Messages

Error reading 'ods' passwd from wallet!!!!!

I did:
c:\>oidmon connect=hahldap start
(No errors).
C:\>oidctl connect=hahldap server=oidldapd host=192.168.1.100 instance=1 start
gsluwpwaGetWalletPasswd: Opening 2 file failed with error 11005
[gslusw]:Error reading 'ods' passwd from wallet
[gsdsiConnect]:Error reading 'ods' passwd from wallet
Could not connect to the Database.
What could be the reason??? I am running on WinXP Is it the problem?
Installation went fine for both Metadata repository and for the Oracle Internet Directory.
Note: I couldn't find the service OracleDirectoryService_xxx at all, does that mean the installation is incorrect?
thanks.

Any resolution here :
My listener is up
My DB is up and accessible, but when issuing the following command I get following error .
Any chance you can offer some advice ?
oidmon start
2006/03/01:12:58:32 * gsluwpwaGetWalletPasswd: Opening 3 file failed with error 11005
2006/03/01:12:58:32 * [gslusw]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [gsdsiConnect]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
Im on Unix

IDOC import from CRM 7.0 to SAP PI 7.0 fails: unable to read segments

Hello,
We want to import an Idoc from a CRM 7.0 system to SAP PI 7.0.
The import fails with the message ""unable to read segments".
The issue is related to ALL Idocs, standard and customer defined.
The result of any import is that we can see the object in the import folder, but the structure is missing.
Importing any RFC from the same CRM system is no problem.
Any ideas?
Your help is appreciated.
Regards
Dirk

Hi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

Error while extracting data from CRM

Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira Anand

Hi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS    = CLNT645BIP
REQUNR     = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished

Error when Reversing metadata from HFM

Hi,
I'm getting this error when i try to reverse metadata from HFM.
"com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver."
I already try the suggestion in this forum including
Cause
The Java Library Path of the HFMDriver.dll is missing in Wrapper configuration file.
Solution
1. Backup and edit the ODI_HOME\tools\wrapper\conf\snpsagent.conf and include the following entry in Java Library Path section :
wrapper.java.library.path.2=../drivers
After adding it will look as follows:
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../tools/wrapper/lib/
wrapper.java.library.path.2=../drivers
Note: HFMDriver.dll is usually present in <odi_home>\oracledi\drivers folder. If it is located in different path, then appropriate location should be referred. Also numbering convention like wrapper.java.library.path.1, wrapper.java.library.path.2 has to be in a incremental manner and no duplicates nor gaps should exist.
2. Save the file and recreate the ODI Agent Service with the new configuration parameters as the classes are loaded during its creation and re-test the issue.
But it still errors. Does anyone know another solution?
Btw, i'm using ODI 10.1.3.5, and the HFM's version 9.3.1
Those two are not on the same machine. And i've already installed HFM Client on ODI Machine.
Thanks in advance.

Ok, i've solved the problem above. Looks like i forgot to define driver folder in PATH variable.
But now i got another error.
Looks like the problem lies in HFM now.
It's said that Server/Cluster incorrectly configured. But, in my HFMClient i've successfully access the application.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx0.f$0(<string>:38)
     at org.python.pycode._pyx0.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at com.hyperion.odi.hfm.wrapper.HFMConnection.<init>(HFMConnection.java:57)
     at com.hyperion.odi.hfm.wrapper.HFMServer.getConnection(HFMServer.java:89)
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:52)
     ... 33 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Opening HFM application failed. Error code: 0x80041143 [Server/Cluster is incorrectly configured. Please reconfigure your Cluster or Server connection.]
     at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getConnection(Native Method)
     at com.hyperion.odi.hfm.wrapper.HFMConnection.<init>(HFMConnection.java:51)
     ... 35 more
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [KALBEAPP] on [HFMTest] using user-name [adm].
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Thanks in advance...

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

Error in invoice posting from CRM to ECC

Dear Guru's ,
when we release the billing document from CRM to ECC , system throughs error messages and while we checking the confimation the below green message is appering .
--> Object link not known in CO
Whatever the master data we maintained in the order and confimation is perfect .Kindly advise why this green error is coming???
Regards ,
Pakalapati

solved by my self

Unable to import IDOC metadata from 4.6C based R/3 system

As part of a project we are trying to import IDOC interface definition into XI3.0 from our 4.6C based R/3 System. I have gone through the pre-requisites mentioned at
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
One of the OSS notes 672745 in the above pre-requisites talks about applying basis component patch SAPKB46C46. Our current R/3 System is on the basis patch SAPKB46C39. Is there a way to import just the required function modules without applying the whole patch so that we can
continue with the projet ?
cheers.
Ramesh Babu

<i>There is no SM59 RFC destination involved.</i>
Go to SM59 of the XI box and check, the R/3 system for which XI is having RFC destinations.
And before importing, hope you have given R/3 system IP address, client , user id and Password correctly in the Software componenet version.
<i>Is there a workaround for this?. I remember reading in this forum, that there are other ways of importing IDOC message and interface objects as XSD files directly instead of using import wizard.</i>
>> For this you need to download the Idoc Schema from the R/3 system and then import this schema in the External Definition as a xsd type.
But you need to connect to R/3 system and import the Idoc, Because in the directory, you are going to use Idoc itself as an Message Interface. So the xsd used for changing the occurence of the Idoc type, so that you can post mulitiple idocs.
Hope this helps,
Regards,
Moorthy

Error while fetching data from CRM system to BW

I am extracting data (BP ID) from CRM system. I have upgraded the BI 7.0 system from patch 12 to patch 14. After upgrading when i execute the infopackage to fetch the data from the CRM system. The request is coming in yellow and is not fetching the data. Can you suggest what could be the solution.. or where can i find some help..
Thanks..
Bhavya

Hi,
1 . Do the Data replication in source system
2. Check the source system connections.
3. Check the Infopackage status and also che the exact error from tcode RSMO.
Regards,
Srini Nookala

How to read XMP metadata from a Jpeg

This seems like it should be a no-brainer, but I can't find any classes to do this ?? I can find classes to read song titles from MP3 files, I want to do similar with jpeg image files.
In photoshop and lightroom you can set up titles and captions (and copyright info) in the metadata. When you save a jpeg this gets embedded in the file.
How to read this info and parse it and use it once you have loaded it into a BitMapData???
I am Flash/AS3.0 code only no IDE - please no flex/AIR examples!
Thanks!

http://www.adobe.com/devnet/xmp/

Error reading jms message from MQ-queue

Hi,
To be able to use async-sync bridge in JMS adapter, we recently patched XI 3.0 from SP 15 to SP21. But the jms sender adapter has problem reading the message from the MQ-queue, see detail of error-message at the end of this message.
I did change the adapter to use modules use RequstResponseBean and ResponseOneWayBean as explaned on help.sap.com.
The async-sync bridge worked once and the it started failing.
Detailed error message in communication channel monitoring:
Error while processing message '3c5a0640-9c03-11dc-82f2-000255d3bbf7'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ...
/Maria Lande

Hi,
I fixed it myself. I hade to do a Xi Data Cahe Refresh.
Navigate to Administration section on the SAP Exchange Infrestructure start page. On the Directory tab page, choose Cache overview under the heading Administration of Locks and Caches. Do a Full Cache Refresh on the adapter engine.
/Maria Lande

Error when Extracting Metadata from ECC

Hello,
DS 4.2 was working fine with ECC after the creation of RFC connection. I was able to pull some of the tables. but after Basis team made some security changed with the objects, I am not able to pull the metadata from ECC.It is showing the following error. Can any one help me with this.

Hi Navinchandar Selvaraj,
As per there discussion
Yeah it is not a best practice to assigning SAP_ALL. You should create a new role with authorization. Please contact your basis team. Ask them to create a New role and grant Authorizations. But in some cases SAP recommended to assign SAP_ALL authorization.
Hope this will help you out
Authorization Profile SAP_ALL - Identity Management - SAP Library
This composite profile contains all SAP authorizations, meaning that a user with this profile can perform all tasks in the SAP system. You should therefore not assign this authorization profile to any of your users. We recommend that you create only one user with this profile. You should keep the password of this user secret (store it in a safe) and only use it in emergencies (see also Protective Measures for SAP*).
Instead of using the SAP_ALL profile, you should distribute the authorizations it contains to the appropriate positions. For example, instead of assigning your system administrator (or superuser) the authorization SAP_ALL, assign him or her only those that apply to system administration, namely the S_* authorizations. These authorizations give him or her enough rights to administer the entire SAP system, without allowing him or her to perform tasks in other areas such as Personnel.
Best Practice - How to analyze and secure RFC connections - Security and Identity Management - SCN Wiki
Regards,
Akhileshkiran

Error,while importing METADATA from production to development

Folks,
I am getting the following error while importing the metadata. I have exported from production server and want to do some modification to the existing mappings. Can some body help me to resolve this?
Here is the error.
Import started at 10/07/2004 11:12:19 AM
* Import for OWB Release: 9.0.2.56.0 Version: 9.0.2.0.0
* User: owb_rep Connect String: (DESCRIPTION=(ADDRESS=(HOST=vectrenabp)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=SDWSTEST)))
* Data File: C:\oracle\OWBHome\owb\bin\win32\SDWSDEV-MAPPINGS-20041007_0916.mdl
* Log File: c:\oracle\OWBHome\owb\bin\win32\Log.log Log Message Level: ALL
* Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
* Ignore Universal Identifier: N Commit At End: Y
Informational at line 15: MDL1205: PROJECT with Unique Object ID (UOID) <85247BBFEA1B44C6B10CDB3B70155A63> already exists, so PROJECT with physical name <SDWSDEV> and logical name <SDWSDEV> not imported.
Informational at line 24: MDL1205: DATAWAREHOUSE with Unique Object ID (UOID) <268F5A9F43364309A8C0D01374C4A867> already exists, so DATAWAREHOUSE with physical name <DWH_TARGET> and logical name <DWH_TARGET> not imported.
Error at line 141: MDL1247: Error occurred importing mapping <DWH_ZIP_CODE_DMGRPHCS_DIM_MAP/DWH_ZIP_CODE_DMGRPHCS_DIM_MAP> (at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:

I have selected the option
Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
1. deleting the existing mapping and tried.
2. Putting the mapping in recycle bin and try.
3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
Error occurred importing mapping
<DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
(at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:
In above all cases it is giving me the error.
Could you please help?

Error while extracting data from CRM to 0BPARTNER

Hi All,
We are extracting   daily data from SAP CRM to 0BPARTNER using 0BPARTNER_ATTR(Delta mode) . While loading the data upto PSA, it showed the total number of records as * 50033 from 50033*. But the total and technical status are yellow . When checked the step by step analysis , *Processing error in source system reported * is red and rest all are green.When I saw the application Log it is writtern as * There is a discrepancy between confirmation and deletion of qrfc-LUWs*.
In the Details tab ,we got the following messages.
1)*Extraction (messages): Errors occurred *
   19485 Records sent ( 19485 Records received ) .
2)*Transfer (IDocs and TRFC): Missing messages or warnings *
    *IDoc : sent, not arrived ; Data passed to port OK * and rest every thing is green.
But all the data packets are fine.
WeI have checked using BD87, WE02, WE05   in BW and source systems for I DOCS . But none of the t-codes provide any IDOCS with warnings or errors.
So we have changed the Total l status to Green. Please note that still the technical status is showing as Yellow only.
We started to updating the data target from PSA. Now again, both statues are showing yellow only.So what should we do inorder to resolve this ?
Thanks in advance,
Babu Vasamsetti.
Edited by: babu vasamsetti on Jan 11, 2010 5:54 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PM

Hi
please check sm58 in souce system side trfc may be strucked... to press f6 to run manually
first make a request a red.. in IP
hope u clear it
thx
viijender

Error when load data from CRM 3.0 to BI 7.0

Hi
I have connect CRM 3.0 system with BI 7.0 the CRM is MDMP and the BI is Unicode.
When I run the BW extraction of the CRM Business Partner data I've a short dump that say GETWA_NOT_ASSIGNED
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGNED or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
When I check the RFC in CRM I've disable the Unicode option
I think that it's for the unicode because I've the last support package 12 installed in BI and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Hi Again.
When the BP data is load into BI update it in PSA but the error occur with the update rule and the load monitoring is yellow and I need change it to red to abort it.
Can you help to me?
Regards
Jose

Error reading IDoc Metadata from CRM 5.0 (Basis 7.0) through XI 3.0

Similar Messages

Maybe you are looking for