Error reading Remote file when the connection is slow

I have a program that reads a file from a remote server. The file is an xml file.
This uses URL inputstream.
This works just fine but when the xml that it reads grow in size, the content of the file is not completely sent to the variable string.
I have come to a conclusion that slow connection to the server could somehow cause this. The error is intermittent. Sometimes it works, sometimes it doesn't.
I hope you guys could help me tune this code or if you have suggestions like other ways to read a remote file. Which will work even if the file grows bigger.
Thanks
public String readRemoteFile(String fName)
try
boolean bolContinue = true;
URL tUrl = new URL(fName); //create a URL object with the server source file
//Logger.log("Getting filesize : " + fName);
InputStream is = tUrl.openStream();
String strFileSize = "";
StringBuffer sbXML = new StringBuffer();
byte[] b1 = new byte[10];
               int intBytesToDownload = 0;
int i = is.read(b1);
strFileSize = new String(b1, 0, i);
//Logger.log(fName + " --- " + strFileSize);
try
intBytesToDownload = Integer.parseInt(strFileSize);
catch (NumberFormatException nfe)
Logger.log("Could not read the file : " + fName);
return null;
int bytesReadInTrip = intBytesToDownload;
int bXMLLocation = 0;
while (bytesReadInTrip > 0)
bytesReadInTrip = 0;
bolContinue = true;
//System.out.println(strFileURLPath);
tUrl = new URL(fName + "&fileOffset=" + bXMLLocation);
//Logger.log("reading file1 : " + fName + "&fileOffset=" + bXMLLocation);
is = tUrl.openStream(); //get Input stream of the server file.
//continue download till continuation flag is set i.e. input stream
// is available.
while (bolContinue)
          byte[] bXML = new byte[intBytesToDownload];
i = is.read(bXML);
//Logger.log("i " + i);
if (i > 0)
bXMLLocation += i;
bytesReadInTrip += i;
String strTmpXML = new String(bXML,0,i);
     sbXML.append(strTmpXML);
else
bolContinue = false;
is.close(); //close the input stream of the input file.
//Logger.log("bytesReadInTrip : " + bytesReadInTrip);
//Logger.log("Read file : "+ sbXML.toString());
return sbXML.toString();
catch (Exception e)
Logger.log("Exception while reading the file : " + fName);
return null;
}

well looks that ur run() method is being called more then one time (..)
why dont u try file method exists() before writing it to ensure that it is not written previously

Similar Messages

  • \\Error Reading Rules File when dimbuild with DLR

    Hi
    I am using Essbase 11.1.2.1.
    I create a DLR via the web console EAS (11.1.2.1 too) : a very simple one : dimbuild DLR, ";" as separator, 2 fields (parent and child)
    when i try do do a "Update Ouline..." with a very simple file (1 line : accounts;test) I have this error message "\\Error Reading Rules File"
    I don't know if it can help but if I create the same DLR on another 7.1 essbase serveur through this same wec eas console (11.1.2.1), I have no problem...
    another information, too : my 11.1.2.1 server has a //ESS_LOCALE English_UnitedStates.Latin1@Binary ESSLANG. My 7.1 server has a //ESS_LOCALE French_France.ISO-8859-15@Default ESSLANG. I really don't know if there is a link, or absolutely not.
    Thanks in advance for your help!
    Fanny

    unable to load essmsh.exe : the error message seems to indicate that it is a problem with a path in the environment variables.
    So if you say that the "Error Reading Rules File" is typically a path issue, all is probably linked!
    The admin will probably correct that tomorrow : I let you know if it solves the problem!
    Thanks!
    Fanny

  • Error Reading Header File When Creating a CIN

    Hello everyone. I am a college student new to LabView and Im using the
    software to create a real time data acquisition system for EMG signal
    analysis for a research project. However, Im having difficulty building
    a CIN for my C code. I am using Microsoft Visual Studio.NET 2003 and
    running LabView 7.1 on Windows XP. I am using the "Using External Code
    in LabView" (April 2003 Edition) manual and I am attempting to do the
    steps located in section 3-15 under Visual C++ IDE. However, I keep
    getting fatal error C1083: Cannot open include file: 'extcode.h': No
    such file or dir. I have followed all of the directions in the manual
    and even explicitly tried adding extcode.h to my project  but I
    still get this error. My version of Visual Studio is different then the
    one described so I was wondering if there is something different that I
    have to do in this process. Any help would be greatly appreciated.
    Thanks for your time.
    Pat

    Is there a particular reason you're not using a Call Library Function Node to call a DLL instead of using a CIN? Calling DLLs from Call Library Function Node are usually a much more user-friendly process, which I would recommend, unless you need to take advantage of the extra features listed on page 1-4 of Using External Code in LabVIEW.
    Jarrod S.
    National Instruments

  • I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next

    I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next

    Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
    https://appleid.apple.com
    if you can sign in there, try to sign in to itunes on your computer.

  • Error reading/writing file message when opening garageband and/or files

    I've been recently getting this message when I open garageband and files
    "Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
    I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
    not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
    and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.

    i give up with this discussion forum no no one knows anything

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • In your experience what are the most common errors in binding files when deploying?

    As the title suggest I'm interested in discussing the most common errors in binding files when deploying.
    Reason for this is that I'm currently working on a Powershell script that can parse a binding file and create a reader friendly report (rtf format) with various information.
    But the main purpose for this script is to find common errors in the binding file used. And so far these are the ones I've thought of:
    - Tracking enabled for either services or the pipelines they are using (if it's a binding meant for Prod).
    - Orchestrations logical ports not having any ports bound to them.
    - URI containing certain words that's not ok. For example if a binding meant for Prod contains the word "test" anywhere in the URI then that should be reported in the created rtf report. This also applies vice versa.
    So now I need your help with coming up with more ideas on common errors that need to be looked after and reported on if found! 
    Additional features the report should contain:
    - Listing the details of each orchestration, send port, receive port along with their associated receive location(s). To better understand and get a quick overview on exactly what settings are planned to be deployed. Especially the "TransportTypeData"
    section which otherwise can be quite tedious to read.
    - List each unique host instance, so that I can easier see directly which ones might need a restart after an import.
    I'd appreciate if you can come up with any more features that should be included in this script.
    /Christian @ IntegrationAdmin.com

    Filter on send port not on the same line as the Filter tag.
    This one is a nice one, I ran into it several times. Mostly after copy/paste of a port definition for a binding file, because Visual Studio is formatting after paste the XML in a way the filter will get invalid. This leads to a cryptic error
    during importing the binding.
    http://winterdom.com/2008/06/biztalkfiltersnotgettingimported
    Jean-Paul Smit | Didago IT Consultancy
    Blog |
    Twitter | LinkedIn
    MCTS BizTalk 2006/2010 + Certified SOA Architect
    Please indicate "Mark as Answer" if this post has answered the question.

  • Adobe Illustrator CS4 Error: Error 1603. Error 1305.Error reading from file C:\Program Files\Adobe\Adobe Illustrator CS4\Support Files\Required\Fonts\AdobeSongStd-Light.otf.  Verify that the file exists and that you can access it.  AdobeColorCommonSetRGB

    Iam trying to load illustator in my PC i get following error while loading Application CD 2
    Adobe Illustrator CS4
    Error:
    Error 1603. Error 1305.Error reading from file C:\Program Files\Adobe\Adobe Illustrator CS4\Support Files\Required\Fonts\AdobeSongStd-Light.otf. Verify that the file exists and that you can access it.
    AdobeColorCommonSetRGB
    Error:
    Error 2.
    My serial no. [Removed by moderator]

    Download a copy an installer for CS4 from the links on this page:
    Other downloads

  • I'm getting a Publish Error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.

    I'm getting a publishing error reading; Can't create the file "header.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.
    Does anyone know how to proceed?
    Thanks!

    Try the troubleshooting steps under "FIx iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    Some times all it takes is deleting the .plist to fix this but do the restart and permissions repair if you haven't done this proceedure for a while.

  • Error reading configuration file

    I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
    [] 2012-12-20 22:46:32,176 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
    [] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
    com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
              at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
              at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
              at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
              at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
              at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
    Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
              at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
              ... 7 more
    Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
              at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
              at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
              at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
              ... 9 more
    I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
    Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
    Any ideas of why the Validator.bat can't read the configuration file?

    I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
    I have my license server setup (its the Protected Streaming version).
    I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
    I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
    I am using the local key mode to remove one more variable (I have setup a remote key server as well).
    I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
    When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
    DRM error Major[3363] minor:[0] NSError:(null)]
    From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
    I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
    Colour me frustrated

  • Error: Cannot display file. The file contains 0 bytes

    Hi,
    I am getting the below error when accessing a a document using Autovue from Documentum:
    "Error: Cannot display file. The file contains 0 bytes"
    Please note, autovue server is up and running and I get the below when accessing: http://WebserverName:7002/VueServlet/servlet/VueServlet
    Oracle AutoVue
    VueServlet for AutoVue 20.2.2 Build: 8633 (2013-08-21)
    Servlet tunneling to server[0] (IP=xxx.xxx.xxx.xxx)
    Connection state: OK
    AutoVue server is up and running.
    Build: 8633 (2013-08-21)
    Server Load:
    Server: farm-server[0] (xxx.xxx.xxx.xxx:xxx) Processors: 2
    I hope to hear from someone soon!
    Cheers

    That means that you documentum integration is not working properly
    you will need to debug the integration you are using and attach logs for the server, integration servlet (VueLink for documentum, which version?)
    Please review the KB, there are items associated with it
    Oracle AutoVue VueLink for Documentum Troubleshooting Center(Doc ID 1348153.1)

  • Error reading wsdl file excepetion null

    Hi
    I am trying to invoke a proxy service (web service) wsdl from a bpel process. When i add a web service adapter, put url of external web service and save it, all my service end points defined in the BPEL process are becoming non editable. Binding of operation is changing from web service to HTTP binding for all end points. When I try to edit any partner link, Jdev throws an error " error reading wsdl file excepetion null " for local services. For external service, even though i am refering to a url on the server, it points to " C:\Oracle\Middleware\jdeveloper\jdev\bin\...\xxxx?WSDL" and throws same error " failed to read wsdl file(System could not find the path specified". I am just clueless as to why this is happening. Any help is much appreciated.

    Try the SOA Forum - SOA Suite

  • Error reading product file driver files

    When attempting apply a large merge patch I receive the following error:
    Screening out files not valid for this installation...
    Determining valid on-site files...
    AutoPatch error:
    The following file is missing:
    /oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
    AutoPatch error:
    Error reading product file driver files [complete; make tapes]
    AutoPatch error:
    Error determining valid on-site files
    Any ideas?
    I've tried using options=noprereq option, but that didn't help.

    - Try to restore the file from a backup you have Or just copy it from any other environment.
    - Make sure that you have included all pre-req patches in the merged file.
    I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

  • Error reading project file : no protocol

    I have followed the instructions exactly as in the j2ee tutiorial ,but, when I run asant , an error occurs:
    : Error reading project file : no protocol: ../../common/targets.xml
    Urgent!

    Could you please provide a bit more detail such as which sample you are using? Also are you using the latest version of the tutorial and have you configured your build.properties in the samples/common directory?

  • Reading trace file on the fly.

    I came across one cool trick mentioned by Tanel Poder, but it doesn't seem to work for me. Could anyone please help in reading trace file on the fly.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    SQL> !uname -a
    Linux abc 2.6.16.60-0.34-smp #1 SMP Fri Jan 16 14:59:01 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux
    SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
      2             (select spid||case when traceid is not null then '_'||traceid else null end
                     from v$process where addr = (select paddr from v$session
      3    4                                               where sid = (select sid from v$mystat
      5                                                          where rownum = 1
      6                                                     )
      7                                          )
      8             ) || '.trc' tracefile
      9      from v$parameter where name = 'user_dump_dest'
    10     /
    TRACEFILE
    /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc
    SQL> host mknod /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc p
    SQL> set define off
    SQL> host grep "WAIT" /n01/oraadmin1/diag/rdbms/abc/inst1/trace/inst11_ora_28754.trc &
    SQL> set define on
    SQL> alter session set events '10046 trace name context forever, level 8';
    Session altered.
    SQL> select * from dual;
    D
    X
    SQL>
    SQL> select * from dual;
    D
    X
    {code}
    I dont get any WAIT printed into the pipe file created before tracing.
    Am i doing something wrong here ?
    Edited by: Yasu on Nov 12, 2012 10:14 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I tried manual method and yes i am able to find WAIT lines in trace file.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP, Data Mining
    and Real Application Testing options
    SQL> select value ||'/'||(select instance_name from v$instance) ||'_ora_'||
               (select spid||case when traceid is not null then '_'||traceid else null end
      2    3                   from v$process where addr = (select paddr from v$session
      4                                               where sid = (select sid from v$mystat
      5                                                          where rownum = 1
      6                                                     )
      7                                          )
      8             ) || '.trc' tracefile
      9      from v$parameter where name = 'user_dump_dest'
    10     /
    TRACEFILE
    /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
    SQL> alter session set events '10046 trace name context forever, level 8';
    Session altered.
    SQL> select * from dual;
    D
    X
    SQL> alter session set events '10046 trace name context off';
    Session altered.
    SQL> !ls -lrt /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
    -rw-r----- 1 oracle oinstall 2738 2012-11-12 01:13 /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
    SQL> !grep "WAIT" /n01/oraadmin1/diag/rdbms/proddba/proddba1/trace/proddba1_ora_23021.trc
    WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704368368424
    WAIT #1: nam='SQL*Net message from client' ela= 4057810 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428142
    WAIT #1: nam='SQL*Net message to client' ela= 6 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428492
    WAIT #1: nam='SQL*Net message from client' ela= 195 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428892
    WAIT #1: nam='SQL*Net message to client' ela= 3 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704372428939
    WAIT #1: nam='SQL*Net message from client' ela= 46319788 driver id=1650815232 #bytes=1 p3=0 obj#=-1 tim=1352704418748740Not sure why using mknod fails in my case.
    Edited by: Yasu on Nov 12, 2012 12:48 PM

Maybe you are looking for

  • Please help how do i delete so

    Hello, I just recently bought a zen micro and have a few questions. First it comes with a battery. So when i put in the battery there is another thing there like a chips is that a battery too was i suppose to hold onto the other battery? I might not

  • My G5 won't go to sleep

    Hello, Ever since i installed the new combo update, my G5 won't go to sleep when it is scheduled to sleep. I have it set at 1hr. It always used to go to sleep before i installed the combo update. Anybody else having this problem? Any solutions? Thank

  • Reminder & Term Code for prepayments in Performa Invoices or Vendor POs

    Hi, I need set proper Term Code for AR, PO.  All orders will be paid before ship the goods, the Terms will be 1/3, 1/3 and 1/3 and 2 weeks apart with each prepayment.  PO need pay to vendors 1/2 and 1/2 before they ship.  How to setup those Term Code

  • Your wireless provider does not have a roaming agreement in this area?

    everytime i try to make a call i get a message "your wireless provider does not have a roaming agreement in the area. message 6". i work out of chariton,ia my coworkers have verizon and have no problem. also data doesnt work anymore.

  • Lightroom 5 insatll failed.

    my installation of lightroom 5 has failed with the error "insall msi payload failed with error: 1624. also "third party payload installer_lightroom_x64. msi failed with exit code: 1624. I'm running windows 8.1 on a x86 computer could this be the inst