"Error Reading Settings" for my Airport Extreme

When I installed Server everything worked fine.....until I exposed sevices in Airport using the Server Admin App. I did everything it asked ie. passwords etc., now when I open the Server app I get an error msg saying "An error occurred on the server while processing a command. type 'getIGDPortmaps' in plug-in 'servermgr_network'. "
I went into Airport Utility and everything seemed to be working correctly. Port mapping was checked and the services were mapped. The setup I have is 1 Airport Extreme connected to Server by ethernet with Tunneling enabled through internet options. Then I have 2 Airport Express' extending the network and those are set to "Local link only".
My question is....could I have double Port Mapping happening somehow? and how do I fix it so everything is handled through Server Admin App?
Thanks for the help!

Weel i am sorry but i do not have a solution.
Yet i have a similar problem.
I mean my Upgrade went very well, but Server App asks me to type the password ofmy airport extreme, but all the times did not work.
Thus i decided to reset the airport extreme. All connections works great, but Server App needs the password. Once again i type it but there is an error, as if the password was uncorrect.
Now if i do not fix this issue i cannot use my server because i cannot connect to it.
Thanks for the help
Dona

Similar Messages

Again "Error reading settings" for wiki on OS X Server 10.8

I tried everything I found on the web but still getting the "Error reading settings" for the Wiki of OS X Server for Mountain Lion.
The postgresql service is running and responding. But still I believe it's a postgres problem.
I tried the "remove Server.app -> remove /Library/server -> reinstall Server.app" but it doesn't change anything: wiki "Error reading settings".
Is there a way to reset the built-in postgresql of OS X Server? What about the hidden users (e.g. _postgres) - which of them are required for the
postgresql and how do I see if they all do well?
Any ideas?

I feel the exact same way ... i have read everything i can find on here and through Google ... tried it all. nothing has worked

HT200088 Error Reading Settings in Lion Server Profile Manager

Whenever I try to use Profile Manager in Lion Server, it says "Error Reading Settings". Can anybody help?

I did a clean install of Lion/Lion Server, but I ran ino the same problem too with "Error Reading Settings" for both the profile manager and the wiki.
INVESTIGATION: I checked to see if the postgres database (which I presumed was were the settings were being read from).
# sudo serveradmin fullstatus postgres
postgres:dataDirHasBeenInitialized = yes
postgres:PG_VERSION = "9.0.4"
postgres:dataDir = "/var/pgsql"
postgres:postgresIsResponding = no # !!! why isn't it responding???
postgres:dataDirIsDirectory = yes
postgres:PGserverVersion = 0
postgres:dataDirExists = yes
postgres:setStateVersion = 1
postgres:state = "RUNNING"
PROBLEM: The postgres service hadn't been started properly; I found this by doing the following:
# sudo serveradmin stop postgres
postgres:state = "STOPPED"
# sudo serveradmin start postgres
postgres:error = "CANNOT_START_SERVICE_TIMEOUT_ERR"
FIX: The postgres service couldn't create the log file because it didn't have permission. I did this to fix it, then simply restarted it and all was well:
# sudo chmod 777 /Library/Logs/
# sudo serveradmin start postgres
postgres:state = "RUNNING"
I hope this helps someone.

Error reading settings in wiki and profile manager

I have just upgraded from Snow Leopard Server to Lion server.
I now have the following errors in server app:-
Wiki : message "Error Reading Settings"
Profile Manager: message "Error Reading Settings"
What do I do to get my wiki back!
When I visit my default ssl Wiki I get the following:-
Collaboration::PGCConnectionError in Sources#index
Showing /usr/share/collabd/coreclient/app/views/layouts/application.html.erb where line #5 raised:
FATAL: role "collab" does not exist
Extracted source (around line #5):
2: :user => @user,3: :entity => @entity,4: :owner => @owner,5: :service_client => service_client,6: :controller => controller7: }) %>8:
Rails.root: /usr/share/collabd/coreclient
Application Trace | Framework Trace | Full Traceapp/controllers/application_controller.rb:325:in `service_client'app/views/layouts/application.html.erb:5:in `_app_views_layouts_application_html_erb___1616978790_2215846900_0'app/controllers/application_controller.rb:44:in `render_server_error'app/controllers/application_controller.rb:43:in `render_server_error'
Request
Parameters:
None
Show session dump
Show env dump
Response
Headers:
None
Please help

I did a clean install of Lion/Lion Server, but I ran ino the same problem too with "Error Reading Settings" for both the profile manager and the wiki.
INVESTIGATION: I checked to see if the postgres database (which I presumed was were the settings were being read from).
# sudo serveradmin fullstatus postgres
postgres:dataDirHasBeenInitialized = yes
postgres:PG_VERSION = "9.0.4"
postgres:dataDir = "/var/pgsql"
postgres:postgresIsResponding = no # !!! why isn't it responding???
postgres:dataDirIsDirectory = yes
postgres:PGserverVersion = 0
postgres:dataDirExists = yes
postgres:setStateVersion = 1
postgres:state = "RUNNING"
PROBLEM: The postgres service hadn't been started properly; I found this by doing the following:
# sudo serveradmin stop postgres
postgres:state = "STOPPED"
# sudo serveradmin start postgres
postgres:error = "CANNOT_START_SERVICE_TIMEOUT_ERR"
FIX: The postgres service couldn't create the log file because it didn't have permission. I did this to fix it, then simply restarted it and all was well:
# sudo chmod 777 /Library/Logs/
# sudo serveradmin start postgres
postgres:state = "RUNNING"
I hope this helps someone.

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

FCP X keeps looking for my airport extreme harddrive, HELP

HI,
Okay, I have an airport extereme, with a 1tb hard drive connected to it. I used final cut pro x 10.0.3 to connect to it. Using the import camera archive (i had footage on the drive)
Now, unless i'm at home on my home network, or have the hard drive plugged into my mac when final cut pro x is running, every minute a pop up box comes up saying "There was a problem connecting to the server "base1fool" (base1fool is the name of my airport extreme) It is making the program unuasable!!! I even uninstalled it, using app cleaner, and reinstalled 10.0.4 and still have the same problem!!
Please help
Brooks

Run Airport Utility to see if there are any firmware updates for your Airport Extreme, also run Software Update. If both are up-to-date then your issue may be with your ISP or the neighborhood your are in has too many WI-FI networks all fighting for the same channel. First do a DNS Settings Update and then check, if that doesn't help then download and install iStumbler (Google it) to check the networks in your area. If you see a channel conflict with neighbors then use Airport Utility to change the Airport Extreme's channel to one not being use.

Mountain Lion Server upgrade; "error reading settings"

Just upgraded to Mountain Lion server and now ALL services have an "error reading settings".
For example; I select "websites" and I get the message "an error occured on the server while processing a command. teh error occured while processing a command of type 'getWebAppState' in plug-in 'servermgr_web' "
There are similar errors for every service. I can't turn anything on.
Server can't even read the Logs. it just sits there with "Loading..." displayed.
My web site is gone and even the Groups have been gutted.
I have a backup of my Web site but how to I clean this up so I can even start from scratch !?!

I have the final solution and fix but beware you may not like it that much.
Having had all of the above problems with more or less everything I finally pieced it all together from various threads. This will fix both the AEBS control and the central services problems. Dont shout at me for being a bit basic and not coding etc. but it worked for me. If I can avoid code I do as often as possible as am less likely to balls it up!
This method will loose some data but the main files and users do remain
The Fix:
1. Close Server.app
2. Library/Server make a copy of Server file under a diff name as software server files and a few others would appear to still be usable and you will have to re download it all again of you dont copy it back in ( I didn't and now have learned my lesson). then delete the whole of the Server file.
3. Go to Keychain and search all Airport then delete associated keys permissions etc
4. Delete Server.app and reinstall.
5. Start new setup and it will migrate properly with no errors. This time a big green tick will appear!
6. Replace the software update files into the new Library/Server folder if you want to or leave it untill the rest is done
7 Reconfigure any missing bits..... any enrolled devices will have vanished but probably if you have saved the data from this in Library/Server prior to deletion you may be able to reinstate this but I didnt risk it
This is going to be a total pain if in a large organisation but once working the system is excellent with no swapping from one control set to the other. As each service is switched on it auto configures the AEBS and no further errors and a joy to work with unless you really like to get into the nuts and bolts.
Hope this helps and good luck

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Web service error reading settings

Hello.
I am receiving the following error when trying to access the websites service through the server app:
An error occurred on the server while reading settings.
The error occurred while reading settings for the Web service.
Server version 2.2.1
Any suggestions on how to address?

Start by running this shell command and acting on any error message it may produce:
apachectl configtest

Mountain Lion Server 10.8 DNS ERROR READING SETTINGS

Hi! Well I changed from windows 2008 server to Mountain Lion Server. So far, I have been able to set up website hosting for one website, and I must say works better than windows server 2008, maybe thats because the mac keeps the drive spun up, while in windows server it was an external drive, whatever the issue mac serves up the site much faster that it comes exploding onto the screen of the searcher.. Then I went to try to set up email, I was totally excited, but I think I did a no no in the dns settings, and now, I cant even see them, I just get "Error Reading Settings" Of course I see things in the log that I should undo, but I cant access the DNS settings at all. Any ideas how I can get to the dns settings so I can undo my booboo? Now it has streched its error self into the file sharing, and I cant access those settings anymore either, so that means I cant set up other websites because I cant give permission to view those folders. I also just got another err saying "Multiple errors occured on this server while processing commands. Just exactly what the heck did I do? I must have REALLY SCREWED THIS THING UP! Also strangely Safari browser no longer acceses the web from the server computer. I THINK I KILLED IT.
Any Ideas?
Thanks I really appreciate any tips, I havent got to calendar or vpn, or any fun stuff yet.. Or maybe it might not be fun at all? hahahahahaa!
Thanks

I've gotten into this mess as well and Apple solved it for me.
The Server should be able too lookup itself so running DNS is a good thing, actually the server sets up DNS at install time if it can't find a server to serve it's DNS so it can lookup itself.
The main error in my case was that there wasn't a NS record pointing the machine itself and that there were some firewall rules preventing DNS lookups. Since there is no way to edit the firewall rules via GUI the engineer manually changed some stuff, but wasn't sure where the problem lies exactly, so he passed it on to another engineer.
At this point I was already forced to switch to Google Apps for Business and my website was already running at GoDaddy, at much lesser costs and to much lesser frustration I might add.
Let's face it, Apple has to deliver a better product with the old Server Admin back into place for those who want it for the extra control.
My servers were running great with Lion (eventually), but Apple just had to remove Server Admin from OS X Server... #their_loss

Time Machine Service Page in Server App says "Error Reading Settings"

I have a Mac Mini running 10.8.3.
For some reason the Time Machine Page in the Server App refuses to work properly. If I reboot the server it looks fine for about 10 minutes. It displays the backup location and the list of individual backups. Then I get this message:
25/03/2013 14:37:51.673 Server[286]: Error: The server '127.0.0.1' reported an error while processing command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7fdc1b2445e0 {NSLocalizedDescription=An unknown error occurred}
Also the Time Machine page in Server Apps is blank apart from "Error Reading Settings" and the slider at the top says Time Machine is off.
However Time Machine does work for some clients.
Anyone got any idea?
I think it started having problems when I got a "The network confirguration has changed" alert.

Hi Linc Davis
here are the logs from reboot to failure to load:
26/03/2013 16:57:50.256 servermgrd[1379]: [1379] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 16:59:55.633 servermgrd[1527]: [1527] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:01:58.077 servermgrd[1546]: [1546] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:04:03.937 servermgrd[1561]: [1561] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:04:05.220 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4620f20 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 17:06:07.359 servermgrd[1666]: [1666] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 17:06:07.829 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getBackups' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac480f000 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:18:51.737 servermgrd[1678]: [1678] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:18:51.777 servermgrd[1678]: [1678] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:20:55.346 servermgrd[2846]: [2846] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:20:55.381 servermgrd[2846]: [2846] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:57.682 servermgrd[2861]: [2861] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:57.683 servermgrd[2861]: [2861] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:22:58.114 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4836250 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:25:00.016 servermgrd[2872]: [2872] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:25:00.135 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac494c120 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:26:02.690 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getBackups' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4826a80 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:33:51.868 servermgrd[2886]: [2886] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:33:51.901 servermgrd[2886]: [2886] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:35:54.539 servermgrd[2932]: [2932] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:35:54.580 servermgrd[2932]: [2932] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:37:56.926 servermgrd[2947]: [2947] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:37:57.424 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac472ad50 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:39:59.284 servermgrd[2958]: [2958] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:40:01.135 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getState' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac4657ce0 {NSLocalizedDescription=An unknown error occurred}
26/03/2013 19:42:04.286 servermgrd[2973]: [2973] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:42:04.322 servermgrd[2973]: [2973] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
26/03/2013 19:45:20.502 Server[1154]: Error: The server '127.0.0.1' reported an error while processing a command of type: 'getState' in plug-in: 'servermgr_timemachine'. Error: Error Domain=XSActionErrorDomain Code=1000 "An unknown error occurred" UserInfo=0x7ffac43f84a0 {NSLocalizedDescription=An unknown error occurred}
27/03/2013 11:56:52.191 servermgrd[110]: [110] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out
27/03/2013 11:58:54.217 servermgrd[371]: [371] error in getAndLockContext: flock(servermgr_timemachine) FATAL time out

Lion Wiki error reading settings

Unable to start Wiki on Lion receive error reading Settings.

Solved! At least for me...
I have described all solutions to the major problems I've been having from a crippled 10.7.3 install to a flourishing one here:https://discussions.apple.com/message/17740033#17740033
Hope this helps!

How do I fix the web and wiki server - error reading settings?

Hello,
      I upgraded to OS X Mountain Lion and installed the OS X Server. The Wiki pane has the error message "Error Reading Settings". The Websites pane looks fine, but when I click on "View Server Website", I get the webpage that simply says "Server Error". (I am wondering if these are interrelated, which is why I put them in the same discussion.) I will note that the admin tools must have changed since trying to follow the discussions for previous versions of the Server leads to paths that are not present. Any suggestions on what to try would be most appreciated. Many thanks!

Hello. Unfortunately, serveradmin is indeed one of those paths/tools that are no longer present in the new version of OS X Server. Either that, or it is renamed to something new that I am not aware of. However, doing a ps -A | grep -i postgres, I get the below. I am not sure if this really means postgres is running or not. Looking in system.log file, I am noticing a weird error (attached). Any thoughts on this would be most appreciated. Many thanks!
--------- ps -A | grep -i postgres -------
3709 ??         0:01.67 /Applications/Server.app/Contents/ServerRoot/usr/bin/postgres_real -D /Library/Server/PostgreSQL/Data -c listen_addresses= -c log_connections=on -c log_directory=/Library/Logs/PostgreSQL -c log_filename=PostgreSQL.log -c log_lock_waits=on -c log_statement=ddl -c log_line_prefix=%t -c logging_collector=on -c unix_socket_directory=/var/pgsql_socket -c unix_socket_group=_postgres -c unix_socket_permissions=0770
3724 ??         0:00.79 postgres: logger process
3726 ??         0:02.08 postgres: writer process
3727 ??         0:01.45 postgres: wal writer process
3728 ??         0:02.25 postgres: autovacuum launcher process
3729 ??         0:05.38 postgres: stats collector process
6591 ??         0:00.01 postgres: caldav caldav [local] idle
20614 ttys000    0:00.00 grep -i postgres
---------- system.log postgres error? --------------
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:81 73290180 +0ms] PID 2655 in /tmp/wikiadmin-is-running.pid is stale, removing
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:86 73290180 +0ms] Failed to remove /tmp/wikiadmin-is-running.pid: Permission deniedJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:99 73290180 +0ms] wikiadmin is already running (pid=2655), check /tmp/wikiadmin-is-running.pidJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:141 9be8000 +162ms] Schema is STILL out of date (0 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:152 9be8000 +0ms] Could not open a connection to Postgres. Please make sure it is running and has the correct access.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [PGCConnection:148 9be8000 +4ms] Error in TXN: Error executing query [INSERT INTO entity_attrs (entity_uid_fk, attrs_bin) VALUES ($1, $2)]: ERROR: bind message supplies 0 parameters, but prepared statement "" requires 2        (                0   CoreFoundation                      0x00007fff8d8ca716 __exceptionPreprocess + 198                1   libobjc.A.dylib                     0x00007fff8e824470 objc_exception_throw + 43
                2   PostgreSQLClient                    0x00000001099929ae -[PGC
Connection checkResultOK:forSQL:] + 360
                3   PostgreSQLClient                    0x00000001099935bd -[PGC
Connection executeUpdate:withParams:] + 879
                4   CSService                           0x00000001098e9298 -[CSContentService insertEntityAttributesRow:inTable:withGUID:] + 275
                5   CSService                           0x00000001098ea1fc __57-[CSContentService _internalCreateEntity:asUser:withACL:]_block_invoke_0 + 586
                6   PostgreSQLClient                    0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
                7   CSService                           0x00000001098e9f3f -[CSContentService _internalCreateEntity:asUser:withACL:] + 771
                8   CSService                           0x000000010990b3e5 __88-[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:]_block_inv oke_0 + 898
                9   PostgreSQLClient                    0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
                10 CSService                           0x000000010990b004 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:] + 237
                11 CSService                           0x000000010990b5f1 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:] + 126
                12 CSService                           0x000000010990ba6b -[CSContentService createEntitiesFromTemplate:] + 124
                13 CSService                           0x000000010990cd84 __24-[CSContentService init]_block_invoke_02420 + 225
                14 PostgreSQLClient                    0x00000001099925f7 -[PGCConnection transactionInBlock:onError:] + 147
                15 CSService                           0x000000010990c4f4 -[CSContentService init] + 789
                16 CSService                           0x00000001098bb11b -[CSLocalServiceLocator allocateService:] + 191
                17 CSService                           0x00000001098bb1c7 -[CSLocalServiceLocator locateService:] + 108
                18 CSService                           0x00000001098c1cf7 -[CSServiceBase locateService:] + 70
                19 CSService                           0x00000001098d3f55 __42-[CSSessionService unauthenticatedSession]_block_invoke_0 + 35
                20 CSService                           0x00000001098c26d7 -[CSServiceBase disableRefObjsInBlock:] + 279
                21 CSService                           0x00000001098d3e13 -[CSSessionService unauthenticatedSession] + 200
                22 CSService                           0x00000001098d452f -[CSSessionService currentOrNewSession] + 59
                23 CSService                           0x00000001098d58a5 -[CSSessionService enterMagicalAuthRealm] + 51
                24 CoreFoundation                      0x00007fff8d8bdcac __invoking___ + 140
                25 CoreFoundation                      0x00007fff8d8bdb47 -[NSInvocation invoke] + 263
                26 CSService                           0x00000001098bc50f -[CSServiceDispatcher executeRequest:asPartOfBatch:usingServiceImpl:] + 1507
                27 CSService                           0x00000001098bc9be -[CSServiceDispatcher executeRequest:] + 114
                28 collabd                             0x0000000109851393 +[CSServiceDispatchHTTPRouter routeServiceRequest:response:] + 705
                29 collabd                             0x000000010984fe37 __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke_0 + 73
                30 collabd                             0x000000010985286c __56-[CSHTTPBackgroundResponse initWithConnection:andBlock:]_block_invoke_0 + 185
                31 libdispatch.dylib                   0x00007fff82b49f3d _dispatch_call_block_and_release + 15
                32 libdispatch.dylib                   0x00007fff82b460fa _dispatch_client_callout + 8
                33 libdispatch.dylib                   0x00007fff82b4723e _dispatch_worker_thread2 + 304
                34 libsystem_c.dylib                   0x00007fff8cc0cceb _pthread_wqthread + 404
                35 libsystem_c.dylib                   0x00007fff8cbf71b1 start_wqthread + 13

Getting error reading settings with service profile manager. Why and what can I do to solve problem?

Getting "error reading settings" with the service profile manager in Lion server OS. Why and what can I do to solve problem?

I have also had the 'Error reading settings' problem in Profile Manager, despite trying everything in the discussions and clean reinstalls (which work for a little while only).
It seems that various different fixes work for some people but not others; and the underlying cause of the problem has not been resolved.
There are now numerous threads on this problem (there are yet others with similar problems):
https://discussions.apple.com/thread/3189397
https://discussions.apple.com/thread/3195100
https://discussions.apple.com/thread/3212015
https://discussions.apple.com/thread/3208533
https://discussions.apple.com/thread/3249062
https://discussions.apple.com/thread/3199734
https://discussions.apple.com/thread/3212304
I have posted this in each to try and pull things together a bit.
Does anyone know if Apple has acknowledged the issue and offered an official response?

Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?) Where is the PW for my WiFi? I am stymied. Can I set up through My MacBook Pro, which IS connected to my WiFi network?

Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?) Where is the PW for my Wi Fi? I am stymied. Can I set up through my MacBook Pro, which IS connected to my WiFi network?

If you could provide the make and model number of the modem that the AirPort Extreme will be connecting to, we can likely tell you a bit more about what to expect in the way of getting the AirPort set up and working.
Unfortunately, "plug and play" does not apply here. You will need to set up and configure the AirPort Extreme using your iPad or iMac to name the AirPort as a device, assign a device password, name the wireless network, assign a device password and a few other things.
Once the AirPort Extreme is set up, you can connect the PC to one of the LAN <--> ports on the AirPort Extreme using an Etherent cable.
The iPad and iMac will connect to the wireless network that the AirPort Extreme provides.

"Error Reading Settings" for my Airport Extreme

Similar Messages

Maybe you are looking for