Error reading the data from the infoprovider 0FIGL_R10

Hi Guru's
i am trying to execute the report on the 0FiGL_R10. When i execute the query i am getting the following msg:
No data source is assigned to 0FIGL_R10.
But the datasource is already assigned to the cube.
For this InfoCube the DS is 0FI_GL_10, cheked in the RSA3 it works fine n showing data.
Is there any steps before we r geting the report from this Remote Cube? if yes then plz let me know....
wil assign pts for sure........
thanks in adv
regards
Mohan

Hi Annie,
Are you trying to execute the query on 0FIGL_R10 or 0FIGL_C10, check the
query properties and find the infoprovider where query is based upon.. and
see the cube contents of that cube..
also check the connectivity problems if any...
Cheers,
Pattan.

Similar Messages

Error Reading the Infoprovider

Hi Experts,
We are loading data from one of the Customized extractor to datarget and we are facing below error message in production Box.This extractor is created in P28 itself .
"Error Reading the data of Infoprovider ........
Unable to read data from Infocube .....
Error in Source system'
Did any one face the similar issue?
Regards
Ramesh

Do replicate meta data for the extractor and also check if it is active and its rules etc are active.
Check the background job in R/3 where your extractor is running ..may be it is throwing dump or having memory issue .You can directly go to your R/3 job from BW by RSMO ,select your request and then in menu items you will find the options to see job status in BW and R/3
regards,
rk

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

Error reading the data of InfoProvider /APC/FINGLV01

Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AM

At this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle

BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

Error running query - 'Error reading the data of InfoProvider 0TCT_VC01'

Hi,
I have worked through all the steps to activate BI statistics in our system (Netweaver 2004s SAP_BW 700 BI_CONT 702) yet some of the queries are not working.
Specifically when I run the query 0TCT_MC01/0TCT_MC01_Q0131 I get an error that reads:
Error reading the data of InfoProvider 0TCT_VC01
There is still no data source assigned to VirtualProvider 0TCT_VC01
Any help on how to resolve this would be appreciated.
Thanks.
Dyllan

Did you install the underlying basic cube for the virtual cube(FM) to read the data from? That shoudl be 0TCT_C01- I guess

Pass transaction data from an InfoProvider to the BPC within BW

Hi Gurus,
I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
Thanks in advance.
Cheers,
Àlex

Hi Frank,
I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
This is quite urgent as this problem causes all my jobs to end very late.
Thanks.
Shunhui.

Error reading the standard sequence from the document tables

Hi PM Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit
Edited by: Rohit Kumar on Jan 14, 2009 3:50 PM

Thanks a lot.
We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

SAP Patch :'Error reading the standard sequence from the document tables

Hi Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit

We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

What is the 'quickest' way to read char data from a txt file

Hello,
What is the 'quickest' way to read character data from a txt file stored on the phone to be displayed into the screen?
Regards

To be even a bit more constructive...
Since J2me does not have a BufferedInputStream, it will help to implement it yourself. It's much faster since you read large blocks at ones in stread of seperate chars.
something line this lets you read lines very fast:
while ( bytesread < filesize ) {
         length = configfile.read( buff, 0, buff.length );
         // append buffer to temp String
         if ( length < buff.length ) {
            byte[] buf = new byte[length];
            System.arraycopy( buff, 0, buf, 0, length );
            tmp.append( new String( buf ) );
         } else {
            tmp.append( new String( buff ) );
         // look in tmp string for \r\n
         idx1 = tmp.toString().indexOf( "\r\n" );
         while ( idx1 >= 0 ) {
            //if found, split into line and rest of tmp
            line = tmp.toString().substring( 0, idx1 );
         /// ... do with it whatever you want ... ////
            tmp = new StringBuffer( tmp.toString().substring( idx1 + 2 ) );
            idx1 = tmp.toString().indexOf( "\r\n" );
         bytesread += length;
      }

Error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.

Hi,
Today one my task in the DAC Etl failed and when I opened the DAC log file of it. I saw the error description as below
Error while contacting Informatica server for getting workflow status for PLP_SRC_WH_AP_Invoice_Reconciliation
Error Code = 36331:Unknown reason for error code 36331
Since there is no much information in DAC log file about the failure, I opened the PLP_SRC_WH_AP_Invoice_Reconciliation session log file.
The error description in the session log file says.
There is an error in the port [NEXTVAL]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11023 : An error occurred converting data in the port [NEXTVAL]. The row was dropped.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11021 : An error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01 : CMN_1086 : RECON_SEQ_GEN: Number of errors exceeded threshold [1].
2014-01-14 08:00:45 : INFO : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : CMN_1053 : : Rowdata: ( RowType=-4(error but dropped due to abort) Src Rowid=1186281 Targ Rowid=1186281
NEXTVAL (ROW_WID:Int:): "(NULL)"
I am not sure of this error and I have never seen before. Can any one share some ideas on how to tackle this error and make the task execute successfully.
Many Thanks.

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Error while saving Adobrforms: There was a error reading the document(26)

Hello,
Am not able to save the pdf form.
Error : "The document could not be saved.There was a error reading the document(26)."
Can anyone please tell me why i am getting this error.
Thanks,
satheesh

Hi Satheesh,
Can you give more details about your scenario..
Regards,
Ravi

The document could not be saved. There is error reading the document(23).

HI ,
Im getting error : the document could not be saved. There is error reading the document(23).
Had tried de-select "Save As Optimizes for Fast Web View". error still persist.
Pls help. Thanks

Hi,
I am moving your posting at Acrobat.com forum to Acrobat forum.
Hisami

Error reading the data from the infoprovider 0FIGL_R10

Similar Messages

Maybe you are looking for