Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

Similar Messages

Error reading the data from the infoprovider 0FIGL_R10

Hi Guru's
i am trying to execute the report on the 0FiGL_R10. When i execute the query i am getting the following msg:
No data source is assigned to 0FIGL_R10.
But the datasource is already assigned to the cube.
For this InfoCube the DS is 0FI_GL_10, cheked in the RSA3 it works fine n showing data.
Is there any steps before we r geting the report from this Remote Cube? if yes then plz let me know....
wil assign pts for sure........
thanks in adv
regards
Mohan

Hi Annie,
Are you trying to execute the query on 0FIGL_R10 or 0FIGL_C10, check the
query properties and find the infoprovider where query is based upon.. and
see the cube contents of that cube..
also check the connectivity problems if any...
Cheers,
Pattan.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Regarding Loading the data from DSO to cube.

Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
Thanks

Hi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks

Error while retriving the data from the database

morning we shutdown and start up the server.after that when i am retreving the data from the database it is giving the following error.
ora-04030: out of process memory when trying to allocate 64512 bytes(sort subheap,sort key)
pga_aggregate_target details are as follows
value=2147483648
display value=2g
is default=false
is sesmodifiable=false
hash=2184567208

Please look at the following link :
how solve ORA-04030: out of process memory when trying to allocate
Cheers!

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Regarding reading the data from the files without using Stremas

hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.Ramakrishna

Simply put, you can't.
By why do you need to?

Reading the data from the BufferReader????

Hi,
When i read the data from the BufferReader Like:-
// Reading the data
sbAppendBuf.append(""+"\r\n");
I am getting an extra new line character before the Closing Tag. Where the output is like:-

How the extra space is coming i am not so sure where "\r" is needed for the proper alignment.So it is needed.
Please do provide a solution for this..
Thanks,
JavaLover

Here the snippet of my code:-
sbAppendBuf.append(""+"\r\n");
Thanks,
Java Lover

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
Thanks

Two questions:
One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

Kinect Explorer WPF C# read depth data from the file and conversion to skeleton

Hello,
I am using Kinect sensor to do some research on biometrics. Since it is impossible to find people to collect some samples, I would like to use samples from the TUM - GAID database, where there exist Color View and Depth View (in .raw format) samples. Therefore,
I need to read these samples from the file and do a batch processing, instead of performing real-time collecting of samples (where I can take automatically the Skeleton view using the Kinect SDK). So, I need help on
1. Reading the data from the file (instead of activating the Kinect sensor) and give this data as an input for conversion to a skeleton
2. Read the .raw files
Thank you very much
Kind regards

Hiya,
I doubt this forum, C Sharp, will provide much help. You are asking about the Kinects system not C#
language. However, you can try this link; http://kinectforwindows.codeplex.com/
Hope this help. Thanks :)

TO Read the data from the I/P payload of the proxy

I want to know is there any function module or report available to read the data from the
payload of the proxy. As we can see the data in the input payload for the prticular
message in sxmb_moni tcode.Is there any table where this data will be stored.
And also I have to update one Ztable with XML Message ID,Sender Interface Namespace,
Sender Interface Name as and when this proxy is triggered. For this I will have to implement the
class for the interface in the sproxy tcode and in this implementation i will update this
ztable but my problem is how will i get this values there.
In debugging I found one report rsxmb_display_msg_vers_new is submitted in sxmb_moni to show ll these details but
looking specially foe the paylod data.
Your help is highly appreciated.
Thanks.

Hello PawanG ,
It is very simple to find out all DB tables involved in the rsxmb_display_msg_vers_new . Steps below:
1. run tcode SE30
2. click "program" radio box, input RSXMB_DISPLAY_MSG_VERS_NEW as program name, click "Execute" button.
3. input an valid message uuid in the "Message GUID" field and execute.
4. go back to SE30,click "Evaluate" tab
5. click "DB tables".
Then all DB table name and description are listed there. I am sure you can find what you need. Good luck!
Best Regards,
Jerry

I am trying to delete the data from the info cube.

Hi All,
i am trying to delete the data from the info cube.in cube reporting symbol is availble.when i click on delete button delete symbol is coming again when i click on refresh button request is not deleting .please give me solution .
Thanks,
chandu

Hi,
Also try to delete in Data Mart Status.
R u deleting particular request or the entire data in cube, if entire data then right click on Cube select Delete Data, it entirely deletes Data.
Hope it helps you...Let us know if you still have any issues.
Reg
Pra

Error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.

Hi,
Today one my task in the DAC Etl failed and when I opened the DAC log file of it. I saw the error description as below
Error while contacting Informatica server for getting workflow status for PLP_SRC_WH_AP_Invoice_Reconciliation
Error Code = 36331:Unknown reason for error code 36331
Since there is no much information in DAC log file about the failure, I opened the PLP_SRC_WH_AP_Invoice_Reconciliation session log file.
The error description in the session log file says.
There is an error in the port [NEXTVAL]: The default value for the port is set to: ERROR(<<Expression Error>> [ERROR]: transformation error
... nl:ERROR(u:'transformation error')).
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11023 : An error occurred converting data in the port [NEXTVAL]. The row was dropped.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : TT_11021 : An error occurred moving data from the transformation RECON_SEQ_GEN: to the transformation FILTRANS.
2014-01-14 08:00:45 : ERROR : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01 : CMN_1086 : RECON_SEQ_GEN: Number of errors exceeded threshold [1].
2014-01-14 08:00:45 : INFO : (582188 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Server) : node01_ : CMN_1053 : : Rowdata: ( RowType=-4(error but dropped due to abort) Src Rowid=1186281 Targ Rowid=1186281
NEXTVAL (ROW_WID:Int:): "(NULL)"
I am not sure of this error and I have never seen before. Can any one share some ideas on how to tackle this error and make the task execute successfully.
Many Thanks.

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error reading the data from the remote cube

Similar Messages

Maybe you are looking for