Error received when attempting to map a PeopleSoft role in CMC

We receive the error "Error occurred while updating PeopleSoft Enterprise authentication properties: The PeopleSoft Enterprise server returned an error. Error: (SOAP-ENV:Server) Server Error. Detail: Unable to find a Routing corresponding to the incoming request message." when attempting to map in a role from a PeopleSoft enterprise system.
Note we are able to map roles into this BOE system from other PS systems with no issues....
This particular PeopleSoft system has a Tivoli Access Manager layer, while all others we have successfully integrated with do not. Is there anything that needs to be different for the QAS URL for a PS system behind TAM? Is the integration kit supported for use with TAM PeopleSoft environments where there is an additional logon layer? Any idea what could be causing the attached error?
Thanks in advance!

Only closed so that I could open other questions (10 question limit).

Similar Messages

VersionMismatch Error when attempting to map a PeopleSoft role in CMC

ERROR on "Update" to map a PeopleSoft role in CMC
"The PeopleSoft Enterprise server returned an error. Error: (SOAP-ENV:VersionMismatch) SOAP version mismatch or invalid SOAP message. Detail: "
BOE-XI (R2)
BOE PeopleSoft Integration Kit
PeopleSoft 8.9
PeopleTools 8.49
Anyone seen this error before, and know the fix....?

Only closed so that I could open other questions (10 question limit).

I am receiving the following error message when attempting to text to a valid mobile/cell number in Peru.

I am receiving the following error message when attempting to text to a valid Mobile/Cell number in Peru...Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
I am able to receive texts from the number in question, but not able to text back to the person sending.
The number is a valid 9 digit cell/mobile number.

If you're sending as SMS (green bubble) then this is a carrier issue and not an issues with your phone.
To text internationally, you nearly always need to include the country code before the rest of the phone number. If you are doing so and still have issues, contact your carrier.
~Lyssa

TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Receive "Access Denied" error message when attempting to install iTunes

Receive "Access Denied" error message when attempting to install iTunes.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules". I uninstalled, emptied trash and re-installed but I continue to get the same message.

I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?

A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020

Another "An error occurred when attempting to change modules" error

Hello all:
After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
More details that may or (likely) may not help:
- Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
- I upgraded my Mac to the latest patch level after observing this error to no avail.
So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
Thanks!!!!
Matt

I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
Please post back your results.

Help with "An error occurred when attempting to change modules"

Hi! I installed LR v2.6.632038 and I received " An error occurred when attempting to change modules" I could not do anything to make it work so I uninstalled it and then tried to reinstall. I never got to enter my serial number so I do not know if it ever uninstalled completely or if I needed to??? I have Mac OSX version 10.6.2 if that helps Thanks! Kim

Error changing modules | Lightroom
Mylenium

Keep getting error message when attempting to buy a song (Error 5002)

This error message seems to pop up with just this one song (says there is an issue with the iTunes store and that it is an unknown error) and it has not changed this status for a month now. I have the latest iTunes and there were no problems in updating/getting other songs from the store.
So what's up?
Thanks,
MH

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.

I have 2 WFE behing F5 that handles ssl termination too. I have a site abc.xyz.com.
At aam i have
http://abc.xyz.com in default zone and https://abc.xyz.com in internal zone.
AT sharepoint content source; I have both http and https of the above site version.
DNS entry of abc.xyz.com is pointing at VIP in f5 which load balances this site at 2 different ips assigned to each web front end server.
Now when i run search in this content source, searchable item populates but there is error for http request telling An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.
Why is this happening?
Is it because requests are coming to f5 as https but search is returning it as http? Will SSL termination removal from f5 solve this issue which i really don't want to do? Will pointing dns entry to two ips in wfe instead of f5 VIP will work?
Adit

Hi,
I have seen a similar post from you, my understanding is that when you ran search in your content source, there was an error. You can take a look at the following thread:
http://social.technet.microsoft.com/Forums/en-US/94e999e3-4128-4674-97dc-e46e71fe0f46/search-service-setup-behind-f5-an-unrecognized-http-response-was-received-when-attempting-to-crawl
Best Regards,
Wendy
Wendy Li
TechNet Community Support

An error occurred when attempting to call the providers register function.

Hi
I am getting the following error while registering the Portlet to a WSRP portal.
]An error occurred when attempting to call the providers register function. (WWC-43134)
An error occured during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method <init>)
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_Registration_PortType_Stub.register(WSRP_v1_Registration_PortType_Stub.java:183)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_Registration_PortType.register(Unknown Source)
. (WWC-43273)
I have done all the required configuration which includes the following.
1. Installation of Infrastructure.
2. Installtion of Portal.
3. Created OC4J_WSRP instance on Portal_Home, configured DAD which is UP.
4. Deployed the application which URL while registering giving me the above year.
Can anybody give me an Instant Solution.

I am receiving the same error messages under the same conditions.
I have not not added any .jar files to the database and do have invalid 'java class' objects in my 'user_objects' table/view.
A 'Troubleshooting Pdk Services for Java' article (search OTN for WWC-43134) mentions
'recompiling the invalid objects'. How does one do this?

An error ocurred When Attempting to change modules.

I just installed the Lion, all well until I tried to install Lightroom, it opensup, but gets stuck in a tele where you can not select any of the modes, type lybrary, maps etc.
is inoperative.
Does anyone know of any solution, already tested the 3.4, 3.5 and 4.0 and the all have the same problem.
The message it gives is this:
An error ocurred When Attempting to change modules.
I have installed the system from scratch, formatted the disk, theninstalled the same as it was before, it did not happen, I downloaded atrial from Adobe on their website, tb did not happen, I tried a few others that I had here, all have the same defect.

Read this thread. It should fix your problem.
http://forums.adobe.com/thread/673507?decorator=print&displayFullThread=true

How to correct Runtime error R6034 when attempting to update iTunes on PC?

How to correct Runtime error R6034 when attempting to update iTunes on PC?

Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

An error occured when attempting to change modules .. how to solve this ? Thanks

Hi there,
I installed Lightroom 5, then it asked it for some directory to create some catalogue. I changed was was given default to me to some other directory. It was a mistake.
Then a message saying "An error occured when attempting to change modules" always popped out when I started Lightroom 5.
In fact I uninstalled and reinstall Lightroom 5 again. Ang it gave me the same message. I am not sure why when I reinstall it, it no longer asked me the directory I wanted to create the catalogue but instead gave me the error message straight away...
Any ideas on how to solve this is greatly appreciated as I desperately need to use this Lightroom 5 ...
Thanks

99jon wrote:
Did you install from CC desktop or from an Adobe download link?
When you click on the install button under the Apps tab within the Creative Cloud desktop app, no serial number is required.
Hi 99Jon,
I installed from CC desktop and you are correct. You are correct, when I install the CC, there is no serial number required or given to me.
Let me explain again the sequence of my problem.
1) I installed the CC desktop after I chose to pay monthly.
2) The installation was perfectly fine, NO asking of serial number
3) I install the Lightroom 5.7.1 without problem and NO asking of serial number too.
4) I run Lightroom 5.7.1 for the first time and it asked me to select a folder for catalogue I didn't select the default directory that it suggested. And this caused problem because it then gives a message saying "An error occurred when attempting to change modules"
5) so I delete the whole Lightroom 5.7.1 and reinstall from CC Apps.
6) The problem still persists and I continue to have the "An error occurred when attempting to change modules" message
7) So I deleted the Lightroom 5.7.1 and reinstall. Problem still persist.
8) So, I did a software update as advised by the link you gave me (ie Solution 1). Interestingly, the update Version is 5.7.1 which I have.
9) After the update installation, I no longer receive "An error occured when attempting to change modules" the message but instead tnow I receive message asking me for serial number. So much problem now ...
Note:
If you see this link, something is wrong bcos when you clicked the settings wheel, you'll see that Managed Application - Uninstall Unavailable"
<a href="http://s32.photobucket.com/user/ryan_khoo/media/ScreenShotofAdobeCC_zpsa6c420e7.jpg.html" target="_blank"><img src="http://i32.photobucket.com/albums/d2/ryan_khoo/ScreenShotofAdobeCC_zpsa6c420e7.jpg" border="0" alt=" photo ScreenShotofAdobeCC_zpsa6c420e7.jpg"/></a>
So now my problem has changed form one where the error message popped up to one which now asked me for serial number ...
Any ideas ?
Thanks

I got the following error message when attempting to complete the questionn

Hello Expert,
I am facing following error message when attempting to coplete my questionnaire via portal "Could not create JCOClientConnection for logical System: HSS_MODELDATA_DEST - Model: class com.shell.oh.oh.medapp.model.MedAppointmentRFCModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
<< OLE Object: Picture (Device Independent Bitmap) >> Could not create JCOClientConnection for logical System: HSS_MODELDATA_DEST - Model: class com.shell.oh.oh.medapp.model.MedAppointmentRFCModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please advice....
Bhuwan

There are several threads about the 0xFFFE7958 error. So far there is no answer for the problem. I have contacted iTunes support twice about the problem and other than "we will get back to you..." I have received no support. The best part is that they charged me for this. How about a refund or something?

Error received when attempting to map a PeopleSoft role in CMC

Similar Messages

Maybe you are looking for