ERROR: red-white checkered box when exporting Motion effects from FCP-COMPR

Hello, im having an export issue with motion clips inside Final Cut Pro 2.
I exported the shortfilm using quicktime-same as project.
Suddently in the exported file i get red and white chekered box where the motion effect takes place.
Im using chroma to replace images from a tv set, i use the same effect around 15 times across the shortfilm, but only in two places it shows this red & white box...
Does anyone knows why this happens, how can i solve it?
I tird to export using compressor, but in compressor´s preview window, it shows exactly this red and white box everytime my motion efects apears.
PLEASE HELP!!!!
Thanks a lot for any suggestion
ger

sorry for a mistake, im working on Final cut Studio 2

Similar Messages

  • Why does font looks pixelated when exporting motion template to FCP?

    I created a motion template for some text animations and I also tried with just a motion file and when I added either one to FCP it just looks like crap (pixelated edges, really really bad edges)
    I noticed this happens if you don't have a drop shadow or a glow selected on the fonts
    is there a way to solve this?

    http://daystreet.com/Motiontext/Motiontext.html

  • Export Using Compressor, from FCP, and Virtual Clustering

    Has anyone successfully used Virtual Clustering - that is, setting up shared services for multiple instances so that you can use all 4 or 8 cores on a machine - when exporting timelines directly from FCP to Compressor 3?
    I know in theory it doesn't seem like it could work (with FCP send frame-by-frame rather slowly and Compressor needing frames much faster) but Compressor 3's manual (pages 119-120) says that it should work.
    I believe I'm following the instructions correctly, but it always fails...

    Closin' out.

  • Error in character spacing when exporting to pdf from word 07

    I am having trouble with exporting to pdf from MS Word 07.  The character spacing throughout the document is wacky.  This also happens when exporting to pdf from a GIS program.
    Any help?

    I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
    In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
    I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
    As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed.  Some are embedded, some embedded subset, some are not embedded at all.  I use styles to manage font types and heading levels.  There is nothing fancy about it - all Times New Roman.

  • Background Colour Incorrect when exporting to PDF from Crystal Reports 2008

    Hello All
    When exporting to PDF from CR2008 the background colour of the crosstab is incorrectly displayed. The problem is as follows to create a crosstab with a grey header row and column details in white we have used the following trick.
    Format Cross Tab Border Background is set to Silver.
    Crosstab Expert Grand Total Background colour is set to white.
    The result is a crosstab with header in grey and details in white.
    This report displays correctly in CR2008, and exports as seen on screen to everything but PDF. When exporting to PDF the Crosstab is completely grey taking on only the Background colour of silver, and ignoring the Grand Total Background colour being set to white.
    What is strange that when I print to PDF the format is also displayed exactly as required,
    Any help on this matter would be greatly appreciated.
    Some additional details.
    CR2008 version 12.3.1.683
    Adobe Reader version 9.3.3
    Windows XP Professional
    Thanks
    Phillip
    Edited by: Phillip L on Nov 23, 2010 1:51 PM

    If this is a big issue for you then please purchase a case and a Rep can duplicate and escalate to R&D.
    As a work around export to Editable RTF and in Word 2007 you can get a PDF export plug-in and then export to PDF.
    Thank you
    Don

  • Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

    Help needed,
    I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still  I cannot login I to my itune account. Same message keeping. Popping up,  this problem started supricly today.

    Take a look at the instructions here.
    http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

  • Color profile off when importing motion proj into FCP

    Color profile off when importing motion proj into FCP. Is there a way to set the profile?
    I deleted preferences in FCP.

    No, profile do many things. It is a color space. It allows different apps and systems to view colors the same. Also fcp typically works in a tub color space not rgb.

  • Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

    Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

  • Export DPX files from FCP with Timecode

    Hi,
    Have anyone found a way to export DPX files from FCP, and also get the timecode in the DPX header...
    Thanks for answers!!
    //P

    Your workflow is not correct.
    In FCP I bring the clip to the timeline, trim, color correct it then File> Export> Using Compressor. Compressor opens up and places the clip into the Batch Window. This works fine, but when I go back to FCP, delete the clip from the timeline and place an other clip there and when I Export>Using Compressor, Compressor places the clip in a new Window title "Untitle 1" and so it goes on. As far as I understood, whenever you add a clip from the FCP it places it below the first clip so when I want to add my settings, I can add all 3 settings to all the clips. Did I missunderstand something?
    You're misunderstanding a couple of different things. When you send a clip or sequence from FCP to Compressor, you cannot then apply the settings you want in Compressor then go back to FCP and delete that clip from your sequence ... Compressor is trying to reference that sequence. If you keep removing clips, then Compressor won't follow those clips ... you're essentially breaking the link between Compressor and FCP by doing this.
    Try this:
    1. Load Clip A into the Viewer, Set your In & Out points and add your Color Correction.
    2. Press Command U to Make a Subclip. This will create a separate "clip" in your bin. Rename as necessary.
    3. Repeat this process for your other 19 clips.
    4. Then Select all of your new subclips in your Browser, then File > Export > Using Compressor. This will open Compressor and add all of those subclips into the Job window.
    5. Add your appropriate Target settings and set your Destinations and revise any filenames if necessary.
    6. Click Submit.
    For a good, quick overview on the basics of how and when to use Compressor, check out this video from MacBreak Weekly: http://www.pixelcorps.tv/macbreak153

  • Exporting multiple projects from FCP timeline hangs

    When rendering multiple projects from Final Cut Pro's timeline through compressor, I get varied results. I am rendering 3 files - Apple Pro Res, MPEG-2 (VBR Highest quality for Blu-Ray), & 48khz AIFF audio file.
    Typically we will set up 3 projects for one night to render overnight (30 minutes to 1 hour for each project). In the morning when we come in compressor will sometimes show up as 90 hours remaining, sometimes it will still be cranking out on the last project with 12 hours remaining. If we leave it going it will eventually finish. However when we shut everything down, reboot computer, start export from timeline and it completes the render in HALF the time compressor stated remaining before we closed it. Each project typically takes 6-8 hours to get all three files (pro res, MPEG-2, AIFF) we allow 18 hours for render.
    Drive space should not be an issue. We have a 5 TB array (typically has 2 TB free for 4 projects), system drive has 350 GB free and the 4 projects rendered out will take up approximately 300 GB. The project reads, and writes to the array for everything.
    Any help on trying to figure out why compressor slows down over time. Once restarting compressor goes as expected.
    Thanks for the help in advance.
    Don
    All software is up to date latest versions of FCP and Compressor.

    This is like an EDL...Edit Decision List.  This basically is a metadata rich document that is used to transfer clip information between systems.  You can export an XML from FCP 7 to FCP 6 so that you can open a sequence, or a project.  Export an XML of the sequence and open that up in Excel to have clip name, reel and timecode information for tracking footage. 
    No media is enclosed in this file.

  • I would like to know the list of possible output (export) file codec from FCP X. For example, can I export  in F4V or FLV format?

    I would like to know the list of possible output (export) file codec from FCP X.  For example, can I export  in FLV format?  Where do I find the list, which gives me all the details about it?  Or is there only one output codec? Thanks

    That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.

  • White pillar box when I export full quality

    Hi all,
    So when I try to export my iMovie 06 project as a full quality .dv file, the resulting file has a white pillar box on the right side. See pic:
    http://www.flickr.com/photos/8496008@N03/2268735670/
    Any ideas what might be causing this? Are there any workarounds? It didn't used to do this, maybe it was the 10.5.2 update?

    Any ideas what might be causing this? Are there any workarounds? It didn't used to do this, maybe it was the 10.5.2 update?
    Can you post a screen capture of the source file info as displayed in the QT Player "Inspector" window? (Or a sample snippet of the source file?)

  • Grey boxes when exporting slideshow.

    When I export a slideshow from Lightroom (1.4.1 Windows), using all default settings it doesn't display properly. The pdf files (viewed with Acrobat Reader8) has right number of pages (photographs), however the photos are not showing. Instead I see a grey box (the size the photo should be) with a red diagonal line. Tried all helpfiles, should be straightforward, what am I doing wrong????
    Many thanks!

    Well known LR bug.
    Regenerate your previews before export to slideshow.

  • Error message when importing motion files into FCP

    In FCP.
    I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
    By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
    When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
    When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
    I go back to the training file to try the same procedure and it works fine.
    Go back to my own project and it doesn't work.
    Any ideas? Anyone?
    I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
    Also working with universal software for FCP studio.
    Intel 2.66GHz Mac OS X (10.4.9)
    Intel 2.66GHz   Mac OS X (10.4.9)  

    OK???
    Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
    I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
    I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
    Thank You Again!

  • SSRS XML Errors when exporting to .xlsx from Dynamics NAV Database

    We use Dynamics NAV for our ERP and have many SSRS reports.  We get xml Errors when exporting to Excel .xlsx.  I've seen this happen since SQL 2008 R2 and have posted in many places trying to find an answer, but was hoping MS would solve the
    issue.  The numeric data types in the Dynamics NAV database are all decimal(38,20) and when the value is zero the Excel renderer throws the errors. 
    We now have over 400 reports and we export them to Excel 2003 format. I'm starting to feel like this is my new Y2K issue when Excel 2003 is set to sunset.  I'm fearing that I'll have to do conversions on all numeric data types for all reports. 
    Both of these are Microsoft products so I'm wondering is this even on their radar.
    We're running SQL Server 2012 SP2, and just rolled out CRM 2015 on SQL Server 2014.  I get the errors in SSRS 2008R2, 2012, and 2014.  Has anyone seen this before?   
    Timothy Kruse

    Hi Skywalker73,
    According to your description, when you export the report to Excel, the error “Excel was able to open the file by repairing or removing the unreadable content.” throws out when opening the Excel file.
    Based on my research, it has reported the same issue when exporting to Excel. The issue could cause by numeric columns has  a precision of 16 or higher. To fix the issue, we could change data type in the table to a support lower precision, or convert
    the numbers in the stored procedure that populates the report. For more information, please refer to this article:
    SSRS 2012 Bug – “Excel found unreadable content”. Besides, please refer to this
    article to check if non-printing characters exist in the report.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for