Error Regarding transport of update rule

Hi,
while transporting the object to test server
i am getting the error .object is transported to test
but not in active state .
Regards
upen

Hi,
The following options can be tried:
1)Try to transport the cube once again with option "before data Target" and manually collectinng all the objects.
2)Transport the Update Rules once again
3)Activate directly once again in Test system.
Hope this helps.
Venkat

Similar Messages

Error in activation of update rules.

Hi,
I get an error - 'IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules' while activating the update rules in BI content. Rest all the data flow is activated except update rules.
Can anyone throw some light on this?
Thanks & Regards,
Manisha

Hi ,
Check the update rule.
In that there are two routines.
In the first one Goods being processed & 2nd one as well , there is syntax err.
/BI0/APP_O010 doest exist.
Mostly it is fetching some data from some dso in this routine.
So it should be activated.
Then update rules will be activated.
Regards,
Devina

Error while activating the update rules related to Inventory

Hi,
In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
When I try to activate the update rules, I am getting the following error message:
1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
Requesting you to please guide me on how do I go about solving this issue.
Thanks & Regards.

Hi Ganesh,
For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
Check the Business content cube 0IC_C03.
Also check the document how to inventory management.
For report install the business content report for the cube 0IC_C03 and check it.
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Pcrao.

Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Error installing business content update rules

Hi,
I'm trying to install the below updates rules from the business content
0PLANT$T 0PLANT_TEXT 53AFFWD74OI3CT3RDE3RI9THU
0PLANT 0PLANT_ATTR 5UZVD7UWYN4T81H24YBKGH6KY
I get the error
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Long Text:
IC=0PLANT$T IS=0PLANT_TEXT syntax error: rows 0
Message no. RSAU466
Diagnosis
When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
System Response
The update rules cannot be activated.
Procedure
If error message :
is cut off, proceed as follows to get the complete complete error message:
Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
If I select the Display Activated Program it says does not exist.
Can anyone help me figure out this issue?
Thanks

We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT

Error in activating the update rules

Hi All
I am getting an error while activating Business Content update rules.
I have activate Cube and corresponding InfoCube and was trying to select update rule for the Cube and installing it.
It however gives an error saying Update Rules (Technical Name) are not found.
Anyone encountered this in the past.
If yes let me know the remedy
Regards
PB

Hi P B,
This might be a long shot, but I still want to see if I can be of any assistance:
Have you encountered SAP note 789272 and SAP note 787875?
They should be contained in SP 19 for BW 310, and your errors do resemble those we encountered, albeit using a different version of BW. These notes are relevant for both mine and your version.
Otherwise, I'll gladly have a look at your error messages you can send over here.
Best Regards,
Daniel

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Error while maintaining the Update Rules for the Infostructure

Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.

Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar.

Transport of update rules from one BW system to another

Hello all,
SAP BW 7.0. Two systems: acceptance, development.
We adjusted 4 old update rules between DSOs and InfoCubes in development system. Trying to transport it to acceptance system (transactions se01, STMS).
Two update rules were transferred succesfully as executable. Other two were transferred as inactive. Overall transfer error code 8.
Strange that when I select some of these update rule and push "check" button it says no errors. But in transport log errors exactly in checking and activating of these rules. Please if someone faced with such strange things suggest a solution.
Want to add that rules are consistent, they are transported fully to acceptance. Proble just two are inective. In development they are active, of course.
Activate after transport not an option. They must be transported as active, all 4.
Appreciate any thoughts, thanks in advance,
Pavel

Hi ,
My friend , kindly follow the steps
Step1
Analyze the transfer rules in development , check for any start routines if any , and also field routines , and also some Tables which are associated with the start routines.
Step2
In case if you find those , first transport those and collect it in a separate request and transport it
Step3
later collect a transfer rule request and go with Over write option ( please tell your BASIS guys )
Hopefully your issue will be solved
santosh

Transport of Update Rules

Hi ...
I have created an update rule for a cube and would like to transport it to testing in BW ver 2.0 can anyone give me the exact steps to do this ....
TQ
Nathan

Hi
Go to the transport connector in rsa1 and chose the updat rules in your left pane.
Double click on the select icon...you will get a window with list of update rules
Chose your update rule..
Double click on this..it will come to the right hand side......
Click on the truck icon in the top of all......assign a request number...
and transport
Now go to se09 and release the request
Regards
N Ganesh

RSAU 466 during transport of update rules

Hello,
I wonder if someone has encountered this error in BW 3.50 (or other 3.X versions) in the Method Execution log of a transport request between two BW systems. The log file is the <SID>R9XXXXX.<SID> file in the /sapmnt/trans/log directory.
We have been encountering it with several update rules from content Attribute InfoSources to content MD InfoProviders. This message basically states that there were errors found, but at the exporting system, the update rules work perfectly.
Please inform me of any insight into the true reason of receiving this message, as it is not nearly informative enough.
Thanks,
Daniel

Hi Daniel,
Have you checked the OSS for this error. There are few OSS Notes on this viz., 788629/803920/795076/822915 etc.,
Cheers,
Sree

Error while installing 2LIS_03_BX update rules for 0IC_C03

Dear experts,
when i am trying to install the standard business content
update rule for 0IC_C03 for the datasource 2LIS_03_BX,
it throws me a error stating
"Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found"
I need the cause and solution for this error.
With regards,
Meiyappan

Please choose to install the Update Rule between InfoSource 2LIS_03_BX to InfoCube 0IC_C03.
You have probably not selected to install the Update Rule which is throwing an error.
While Installing, after choosing the required Objects, please also change the Display to "List" to be able to view all objects clearly.
Regards
Anujit Ghosh

Error regarding Transport Request in Queries

Hi all,
We are facing this problem in Queries, we have a certain query, when I try to change it ,it is throwing an error saying that a particular Transport request is not available. I have checked in SE09 (Transport Organizer) and that perticular request as said does not exists. If I Try to generate a new Transport Request for the query,then again, I am not able to as an error occurs saying that the objects present are in different systems.
Has anyone faced a similar kind of situation before??
By the way we have upgraded to NW 2004s.
Regards,
Partha

Hi Partha,
go to - transport connection - click on Bex icon - Assign a request or create a new request and assign to Bex.
System would look for a transport request to save all the changes done to the queries, if one isnt assigned, the system wouldnt allow you to edit any of the queries.
Assign points if this helps.
Regards,
Anil

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Update rules Activation Problem

Hi,
Iam getting the error while transporting the update rules to production,saying error mesage,
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules 4AR6MO7P6M428KB2RPA65E9EX read in version M
Error when activating update rule 4AR6MO7P6M428KB2RPA65E9EX
Activation of the update rules for ZCG_O15 ZBW_CRTDN
IC=ZCG_O15 IS=ZBW_CRTDN error when checking the update rules.
from Dev to QA successfully transported and data hasbeen loaded with out any issues,
I didnot changed any thing in ODS,I Just created the new infosource with only two characteristics and created the update rules direct updating,with out any routines.
I activated the update rules in Dev couple of times and transported to PD,but every time it is giving same error,there was no issues upto QA,
Please suggest anybody how to resolve this issue.
Thanks
BI USER

Hi
Thanks for your replies,
Iam checking from transport request error log,iam getting error message as I mentioned in my question,
iam not getting detail information on error log,Update rules are available in PD system but in inactive state,
I did the Update rules check it is giving message 'no erreors found in update rules'.
I collected all dependent objects from transport collecter,still same error,I tried from Program
RSAU_UPDR_REACTIVATE_ALL,but my PD system is in not modifiable state.
Thanks

Error Regarding transport of update rule

Similar Messages

Maybe you are looking for