Error registering SAPCCMSR - ENTRY_NOT_EXISTING

Hi All,
I am having problem registering SAPCCMSR through Visual Administrator for a Java system. Error on Visual Administrator is as follow:
"Registration of CCMS Customizing Destination
Error during registration of CCMS Customizing destination
ENTRY_NOT_EXISTING"
I have tried numerous way to get around this including following the instruction from note 817714. This note recommended manual registration of the agent using the command 'sapccmsr -j2ee -R pf=/sapccmsr when registering using Visual Admin and in //usr/sap/tmp/sapccmsr for the manual registration method. However, registration fail for both methods.
I can't seem to find this error message reported in SDN or SAP notes. Would someone be able to assist?
Much thanks in advance.
Best Regards,
Wi Tanto

Hi,
Please go thorough the following link which will helpful to you in resolving the problem
http://help.sap.com/saphelp_nw70/helpdata/en/12/68ebf63e74bc44aa46df81326473e8/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/4d/4e8522f10a0b4e895ef5854eafec1b/content.htm
Thanks & Regards,
Vidyadhar K

Similar Messages

After registering SAPCCMSR agent not able to see J2ee nodes in rz20

Hi,
After registering SAPCCMSR agent on J2ee instance not able to see J2ee nodes in rz20. The ccms_connetor file has the
following error
Feb 26, 2012 8:43:44 AM ...y.monitor.mapping.ccms.Selfmonitoring [SAPEngine_System_Thread[impl:5]_65] Error: Couldn't create self monitoring (java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method
name is empty.)).
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
ception: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
ception: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Kernel>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Kernel can't be created due to missing parent node(s).
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Services>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Services can't be created due to missing parent node(s).
Can some one help me on this.
Thanks

Hello Kranthi,
I would suggest you to cross check the steps you have performed to register sapccmsr agent with the following help links and update us.
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
Good Luck.
Thanks,
Siva Kumar

ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll and failure to install

I downloaded and extracted the latest ESR file (Version 10.0.7) this morning. Running SETUP.EXE with no command line switches fails to install Firefox. Ths installation log indicates that the installation has taken 1 second to complete execution. In the Installation log I see the following:
DLL Registration
** ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll **
In the C:\Program Files (x86)\Mozilla Firefox folder there is an uninstall folder as well as an install.log file. No other files or folders exist. Mozilla Firefox does appear in the Programs and Features but shows an icon associated with an unknown application.
I am logged in with a low-rights account but running the SETUP.EXE executable from an elevated command prompt. This should be sufficient to elevate the DLL registration.
Running on Windows 7 SP1 with all applicable updates. I've noticed several other people that have experienced this issue but nobody has a solution.
Thanks in advance for any help!

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error Registering Planning and workspace

Hello all,
when I try to register Planning and Workspace against the Shared Services on EPM 11, I get the following error message:
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Would anyone know how to solve that?
Thanks

Hi there,
i am also getting the same exact error message , the only difference is i am getting it while registering the HFM application and for me Planning went through smoothly.
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

Error:Registered login failed for shared services...

Hi All
while i was configuring the Calc Manager after foundation services ,the window display the error:Registered login failed for shared services....
I try to use the correct user name and password for it .check the installation guide for Hyperion version is 11.1.2 .do not know where to look for correct information to make this configuration work.
Any help would be very useful .
Thanks

Which is the process connecting using machine account?
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Error registering ...\DL2DASMS.dll

I'm trying to install PCSuite v.6.8 in spanish, and this error comes up "Error registering module c:\Archivos de programa\Archivos comunes\PCSUite\Datalayer\DL2DASMS.dll. HRESULT -2147221164. Contact with bla,bla,bla..."
Any solution?
Thanks.

This may help you:
/discussions/board/message?board.id=pcsuite&message.id=4215&view=by_date_ascending&page=2

DLL Registration ** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll

Mozilla Firefox Installation Started: 2012-02-02 0:11:25
Installation Details
Install Dir: C:\Program Files\Mozilla Firefox
Locale : en-US
App Version: 10.0
GRE Version: 10.0
OS Name : Windows 7 or above
Target CPU : x86
Removing Previous Installation
Installing Main Files
DLL Registration
** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll **

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Oscinstall.sh error registering providers

oscinstall.sh registers successfully the mail provider, but gives an error registering the calendar provider .
Any ideas ?
Thanks,
Silvio Seifert
oracle@cosu:/oracle/cs/mt/bin> ./ocsinstall.sh <oidadmin> <password>
--* Post Installation Process Started --*
Following steps occur in the order given below when running the post install script
Step1: Compilation of the plsql Package
Step2: Import of the portal objects if not exist
Step3: Registration of the providers if not registered before
Step4: Addition of the portlets for all the newly registered providers
Step5: Gives a complete statistics of the installation process
=== Step1: Compiling plsql scripts for installation ===
Package created.
Package body created.
Commit complete.
Commit complete.
=== plsql scripts for installation Compiled ===
=== Step2: Importing Portal objects if not exist ===
=== Portal Objects Imported ===
=== Step3: Registring Providers ===
Registring Mail Provider ...
This process can take anywhere between few seconds to few minutes
mail provider Registered / updated
Registring Calendar Provider ...
This process can take anywhere between few seconds to few minutes
Exception in thread "main" java.lang.NullPointerException
at oracle.panama.marconi.install.UrlTokenParser.nukeHttp(Unknown Source)
at oracle.panama.marconi.install.UrlTokenParser.checkUrlValidity(Unknown Source)
at oracle.panama.marconi.install.ProvidersManager.registerCalendarProvider(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.manageProvidersAndPortlets(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.startPostInstallation(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.main(Unknown Source)
oracle@cosu:/oracle/cs/mt/bin>

It didn't ask for any parameters.
Here is what i did.
I ran:
C:\Oracle\Middleware\EndecaServer7.6.0.0_1\endeca-data-enrichment\install>enrichment-metadata.bat C:\Java\jdk1.6.0_45 localhost 7001 http C:\Oracle\Middleware C:\Oracle\Middleware\EndecaServer7.6.0.0_1 C:\Oracle\Middleware\user_projects\domains\endeca_base_domain
and the result is:
ECHO is off.
Registering plug-in BlacklistPlugin...
INFO: Registered auditor for componentType=WebServices auditor=oracle.security.jps.internal.audit.DelegateAuditor$XmlAuditor@298eb7e0
and it hangs there.

Error registering OVM Manager 3.2.1 in OEM 12.1.0.2.0

Getting error registering OVM Manager 3.2.1 in OEM 12.1.0.2.0:
4321: Error getting uuid.
Executing command /scratch/apodelko/install/core/12.1.0.2.0/jdk/bin/java -Xmx256m -Djavax.net.ssl.trustStore=/scratch/apodelko/install/agent_inst/sysman/config/montrust/AgentTrust.jks -classpath /scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/emagentSDK.jar:/scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/log4j-core.jar:/scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/emagentSDK-intg.jar:/scratch/apodelko/install/core/12.1.0.2.0/jlib/gcagent_core.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/OvmClient.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/commons-logging-1.0.4.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-fetchlet-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-ovmintegration-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-ovmintegrationcore-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/lib/jsch.jar oracle.sysman.vt.fetchlet.pojo.AsyncOVMWrapper
OVM Manager URL = <sensitive value not to be displayed>
OVM Manager Username = <sensitive value not to be displayed>
OVM Manager Password = <sensitive value not to be displayed>
OVM Manager UUID = <sensitive value not to be displayed>
Manager ID = SyncManager
Method Name = getOvmMgrUuid
Param Types = <sensitive value not to be displayed>
paramValues = <sensitive value not to be displayed>
Retry Count = 0
Retry Sleep Interval = 0
Exception in thread "OVMMConnectionCreatorThread" java.lang.NullPointerException
     at oracle.sysman.vt.ovm.integration.core.OVMMConnectionCreatorValidator$1.run(OVMMConnectionCreatorValidator.java:70)
     at java.lang.Thread.run(Thread.java:662)
Operation failed
oracle.sysman.vt.ovm.integration.api.EMOVMCommunicationServiceException: 1019: Timeout while creating OVM Manager Connection (tcps://server_name:54322). Ensure OVM Manager is running and responsive.
     at oracle.sysman.vt.ovm.integration.core.OVMMConnectionCreatorValidator.create(OVMMConnectionCreatorValidator.java:82)
     at oracle.sysman.vt.ovm.integration.core.OVMManagerConnection.createOvmManagerConnection(OVMManagerConnection.java:359)
     at oracle.sysman.vt.ovm.integration.core.OVMManagerConnection.connect(OVMManagerConnection.java:199)
     at oracle.sysman.vt.ovm.integration.core.AbstractCoreManager.init(AbstractCoreManager.java:55)
     at oracle.sysman.vt.ovm.integration.core.SyncManagerImpl.getOvmMgrUuid(SyncManagerImpl.java:591)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.sysman.vt.fetchlet.pojo.OVMDataFetchletUtil.executeOperation(OVMDataFetchletUtil.java:241)
     at oracle.sysman.vt.fetchlet.pojo.OVMDataFetchletUtil.executeOperation(OVMDataFetchletUtil.java:120)
     at oracle.sysman.vt.fetchlet.pojo.AsyncOVMWrapper.main(AsyncOVMWrapper.java:126)
Exit code: 251
Any idea how to troubleshoot? It looks like the problem is the tcps connection - but I can't find much information about it.
Thanks,
Alex
Edited by: user739062 on Mar 6, 2013 8:01 AM

Thanks a lot for your offer ... i already found a solution. Greetings Helmar
i forgot point 8.
Got it from http://itnewscast.com/register-oracle-vm-manager-oracle-enterprise-manager-12c
very good documentation
Oracle VM Manager Registration Prerequisites
The following prerequisites must be meet before Oracle VM Manager can be registered in Oracle Enterprise Manager 12c Cloud Control Release 1 (12.1.0.1) and above.
1.     Oracle Enterprise Manager Release 1 (12.1.0.1) and above.
2.     The Oracle Virtualization plug-in must be install and enabled on the Oracle Management Service.
3.     The Oracle VM Manager host must have the Oracle Management Agent (OMA) and be a monitored target in Oracle Enterprise Manager 12c Cloud Control.
4.     The Oracle VM Manager host must have the Oracle Virtualization plug-in.
5.     The preferred credentials for the Oracle VM Manager host must be configured in Oracle Enterprise Manager 12c Cloud Control.
6.     The Oracle Management Service and the Oracle VM Manager host must have consistent name resolution using DNS with both forward and reverse lookups.
7.     Oracle VM Manager 3.1 and above require TCPS authentication.
8.     Oracle Enterprise Manager Release 2 (12.1.0.2) and above with Oracle VM Manager 3.1 and above must have the Oracle VM Manager keystore imported into the Oracle VM Manager host's Oracle Management Agent keystore.

[linux-3.2] watchdog: error registering /dev/watchdog

Today, kmod replaced module-init-tools, and after upgrading my system, noticed this error after udev loaded:
Jan 6 07:44:41 localhost kernel: [ 4.528051] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528088] watchdog: error registering /dev/watchdog (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528113] mei: unable to register watchdog device.
Thankfully, nothing else happened and my system didn't go kaput. But reading the manpage, watchdog does appear to be important. Since udev errors were expected with the kmod upgrade, and this error never occurred before today (checked my /var/log/everything.log), it appears kmod is the likely culprit.
Edit: Tried posting this to the ML, and discovered that the general public does not have write access to the ML. So if some developer thinks this is important, hopefully that person will see this post.
Last edited by Sara (2012-01-09 00:12:41)

I finally found some time to dig in the kernel source a bit and found that I was wrong. Sorry for the confusion. There's nothing wrong with the Intel MEI watchdog driver and the softdog is not involved at all. The truth is that the watchdog core functions only support 1 watchdog device via /dev/watchdog [1]. If the iTCO_wdt driver would use the watchdog core [2], we'd get the correct "only one watchdog can use /dev/watchdog." message and the IMEI watchdog registration would not be attempted. But it doesn't. It registers in a different way [3] and so the core does not "know" about another watchdog being already registered, attempts to register the IMEI watchdog and fails with the confusing "cannot register miscdev..." message.
The bottom line is that the kernel supports only one watchdog and we (administrators) have to decide which device we want to use.
[1] http://lxr.linux.no/linux+v3.2/drivers/ … dev.c#L344
[2] http://lxr.linux.no/linux+v3.2/drivers/ … dog_core.c
[3] http://lxr.linux.no/linux+v3.2/drivers/ … wdt.c#L854
Last edited by laloch (2012-01-08 15:34:41)

More trouble with registering sapccmsr and EYE CATCH error

Hello all,
I saw that this was a topic in an earlier thread. That thread was very helpful for troubleshooting, but it seems I have everything properly set up and patched, but I am still receiving the dreaded EYE CATCH error. The system is a Unicode dual-stack XI system. Here are the details:
sapccm4x registers with no problems.
sapccmsr results in the following:
<b>LE06201:xitadm 160% ./sapccmsr -j2ee -R pf=/sapmnt/XIT/profile/START_DVEBMGS00_LE06201
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XIT_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XIT_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XIT]. (found in config file)
INFO: additional Central Monitoring System is [SLM]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/ccms/XIT_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.so
INFO: DSR: Path /usr/sap/ccms/dsr for Distributed Statistical Records.
INFO: checking version an Unicodeness of dsrlib.so
INFO: DSR: Dynamic Library dsrlib.so (version 22) successfully loaded.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
      pid           26318
      profile       /sapmnt/XIT/profile/START_DVEBMGS00_LE06201
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
INFO: dsr: dsrlib unloaded.
EXITING with code 1</b>
Based on the information in the earlier thread, I checked that the files are consistent in their Unicodeness:
<b>LE06201:xitadm 35% pwd
/sapmnt/XIT/exe
LE06201:xitadm 165% sapccm4x -v
      CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 166% sapccmsr -v
      CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 167% saposcol -v
      SAPOSCOL version COLL 20.94 640 - V3.73 64Bit, 64 bit, single threaded, Non-Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    COLL 20.94 640 - V3.73 64Bit
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 107% disp+work -v | more
disp+work information
kernel release                640
kernel make variant           640_REL
DBMS client library           OCI_920
DBSL shared library version   640.00
compiled on                   SunOS 5.8 Generic_117350-38 sun4u
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Oct 29 2006 21:30:34
update level                  0
patch number                  155
source id                     0.155
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
DBMS server
   ORACLE 9.2.0..
   ORACLE 10.1.0..
   ORACLE 10.2.0..
operating system
SunOS 5.8
SunOS 5.9
SunOS 5.10
LE06201:xitadm 169% pwd
/sapmnt/XIT/exeU
LE06201:xitadm 170% sapccm4x -v
      CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 171% sapccmsr -v
      CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul 7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 172% saposcol -v
      SAPOSCOL version COLL 20.88 640 - V3.60 64Bit, 64 bit, single threaded, Non-Unicode
      compiled at   Apr 16 2005
      systemid      370 (SUN on SPARC CPU with Solaris 2.2)
      relno         6400
      patch text    COLL 20.88 640 - V3.60 64Bit
      patchno       68
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 111% disp+work -v | more
disp+work information
kernel release                640
kernel make variant           640_REL
DBMS client library           OCI_920
DBSL shared library version   640.00
compiled on                   SunOS 5.8 Generic_117350-38 sun4u
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Oct 29 2006 21:30:34
update level                  0
patch number                  155
source id                     0.155
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
DBMS server
   ORACLE 9.2.0..
   ORACLE 10.1.0..
   ORACLE 10.2.0..
operating system
SunOS 5.8
SunOS 5.9
SunOS 5.10</b>
Anyone have any ideas why I am unable to register the sapccmsr? Thanks in advance for your help.
Best Regards,
Warren Chirhart

Hi,
I'd just like to make some additional comments.
The issue comes from the "jmon.dll" library which is non-unicode. You have to download the latest SAR archive of the SAP CCMS agents from the Service Marketplace and update your agents as well as your "jmon.dll" library by replacing the EXE and DLL files.
The agent files are located under:
/usr/sap/<SID>/<INSTNACE>/exe
The "jmon.dll" library is located under:
/usr/sap/<SID>/<INSTNACE>/j2ee/os_libs
Most probably you would have to shut down / restart the instance after you update the library so the changes take effect.
You can find the latest SAP CCMS agents SAR archive in SMP under:
https://websmp109.sap-ag.de/swdc
Then browse to:
/SAP Support Packages/SAP Support Packages and Patches/Entry by Application Group/SAP NetWeaver/SAP NETWEAVER/SAP NETWEAVER <version>/Entry by Component/Application Server ABAP/SAP KERNEL <version> <32-BIT | 64-BIT> UNICODE/<OS>/#Database independent/ccmagent_<agent_version>.sar
Hope this helps.
Kind regards,
Rosen

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Reboot due to system error / Register dump from exception handler

hi,
I have a problem with Labview RT when using Reboot function.
The RT target (desktop) reboot but there is a message : Reboot due to system error. And if I reboot once again, the target become in safe mode.
Now, If I look at the log I obtain the following message see more in the log attached!
*** REGISTER DUMP FROM EXCEPTION HANDLER (code 0x80000003) ***
I don't understand why there is this message.
Anybody has an explaination?
Attachments:
Nouveau Document texte2.txt ‏6 KB

julesjay a écrit:
ok I didn't know that. I will wait for tomorrow.
NI france is not very efficient about labview Real time problems.
There is one or two experts and there aren't easily reachable.
So a lot of question I send stay with no answer.....
That why I hope someone will be able to help me.
Hi Julesjay,
After i have see your log file and the problem, i think NI FRANCE are working on your request for all problems you have in your application.
And i don't understand what you say that, because we have make test, we have send us informations for make different tests, and we are still working on your problem.
I know the problem are not resolved, but we are working for resolve it quickly.
I suggested you to contact the AE that are your service request for have more information.
Best regards,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France

SSL error Registering on Oracle Linux Network

I performed the following actions using Linux v4 update 4.
[root@as1 ~]# rpm --import /usr/share/rhn/RPM-GPG-KEY
[root@as1 ~]# up2date nox register
There was an SSL error: [('SSL routines', 'SSL3_GET_SERVER_CERTIFICATE', 'certificate verify failed')]
A common cause of this error is the system time being incorrect. Verify that the time on this system is correct.
I check the time and date. They are correct to the second.
Any suggestions on how to proceed?

Also , if i choose to ignore all these massages, database is installed.But, startup command fails giving following error :
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/scratch/nnaveen/installations/ora_db11.2.0.1.0/product/11.2.0/dbhome_1/dbs/initorcl.us.oracle.com.ora'
I guess its one of the side effect of database configuration assistant not working properly

Internal error registering VMM with ASR

According to the common errors document, if you get this error you just need to re-run the install. I've tried this on both nodes of the cluster, and about 50 times and always get the same error. I'm at a loss, cert seems fine since I can select the ASR
group and provide the passphrase. Don't know what else to try.. below the errorlog:
11:00:12:Error:RegisterVMM with Activity Id - e20317a8-10c7-4237-b1ad-d88534832485 failed with , Exception Type: SrsRestApiClientLib.SrsException, Exception Message: An error occurred while making the HTTP request to
https://pod01-srs1.eus.hypervrecoverymanager.windowsazure.com/srsrestapi/vmm/register. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security
binding between the client and the server.
11:00:12:StackTrace:   at SrsRestApiClientLib.Vmm.RegisterVmm(VmmRegistrationInformation registrationInfo, SrsCreds srsCreds)
   at Microsoft.VirtualManager.DRA.Registration.VMMRegistrationClient.RegisterVMMWithSRS(String vmmId, String vmmFriendlyName, String selfSignedCertThumbprint, String resourceName, SecureString channelIntegrityKey, String vmmKekCertBlob, VmmKekDetails
vmmKekDetails, Nullable`1 isSyncInitialCloud, Boolean performBackup)
11:00:12:DRRegistrationException while trying to register the VMM with SRS: Threw Exception.Type: Microsoft.VirtualManager.DRA.Registration.DRRegistrationException, Exception.Message: e20317a8-10c7-4237-b1ad-d88534832485
11:00:12:StackTrace:   at Microsoft.VirtualManager.DRA.Registration.VMMRegistrationClient.RegisterVMMWithSRS(String vmmId, String vmmFriendlyName, String selfSignedCertThumbprint, String resourceName, SecureString channelIntegrityKey, String vmmKekCertBlob,
VmmKekDetails vmmKekDetails, Nullable`1 isSyncInitialCloud, Boolean performBackup)
   at Microsoft.VirtualManager.DRA.Setup.RegisterActionProcessor.RegisterVMMWithSRS(Boolean performBackup)
11:00:12:InnerException.Type: SrsRestApiClientLib.SrsException, InnerException.Message: An error occurred while making the HTTP request to
https://pod01-srs1.eus.hypervrecoverymanager.windowsazure.com/srsrestapi/vmm/register. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security
binding between the client and the server.
11:00:12:InnerException.StackTrace:   at SrsRestApiClientLib.Vmm.RegisterVmm(VmmRegistrationInformation registrationInfo, SrsCreds srsCreds)
   at Microsoft.VirtualManager.DRA.Registration.VMMRegistrationClient.RegisterVMMWithSRS(String vmmId, String vmmFriendlyName, String selfSignedCertThumbprint, String resourceName, SecureString channelIntegrityKey, String vmmKekCertBlob, VmmKekDetails
vmmKekDetails, Nullable`1 isSyncInitialCloud, Boolean performBackup)
11:00:12:InnerException.Type: System.ServiceModel.CommunicationException, InnerException.Message: An error occurred while making the HTTP request to
https://pod01-srs1.eus.hypervrecoverymanager.windowsazure.com/srsrestapi/vmm/register. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security
binding between the client and the server.
11:00:12:InnerException.StackTrace:
Server stack trace:
   at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at SrsDataContract.ISrsRestApi.RegisterVmm(VmmRegistrationInformation registrationInfo)
   at SrsRestApiClientLib.Vmm.RegisterVmmAsync(VmmRegistrationInformation registrationInfo, SrsCreds srsCreds)
11:00:12:InnerException.Type: System.Net.WebException, InnerException.Message: The underlying connection was closed: An unexpected error occurred on a send.
11:00:12:InnerException.StackTrace:   at System.Net.HttpWebRequest.GetResponse()
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
11:00:12:InnerException.Type: System.IO.IOException, InnerException.Message: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
11:00:12:InnerException.StackTrace:   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
11:00:12:InnerException.Type: System.Net.Sockets.SocketException, InnerException.Message: An existing connection was forcibly closed by the remote host
11:00:12:InnerException.StackTrace:   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
11:00:12:Register VMM with SRS failed.
11:00:16:Exit Microsoft.VirtualManager.DRA.Setup.RegistrationPage
11:00:16:Enter Microsoft.VirtualManager.DRA.Setup.RegistrationSummaryPage

Hi,
First of all apologizes for delayed response. We had to dig though a few things to figure out the possible reason of failure. This seems like an issue in where machine was unable to make a connection to Azure service. I understand that you have tried registering
multiple times and have failed. If it is not too much trouble can you try registering one more time? Just re-reun the setup and try to register. Ensure that your firewall allows connection to Azure (you can check this by opening
https://pod01-srs1.eus.hypervrecoverymanager.windowsazure.com/. You should see a Server Error page). Ensure that you enter proxy settings if any on the proxy page.
Thanks,
Ramjot Singh
Azure Site Recovery Team

Error registering SAPCCMSR - ENTRY_NOT_EXISTING

Similar Messages

Maybe you are looking for