Error registering UWL

Hi experts,
I tried to register an R3 backend system thru UWL. I'm getting this error.
:javax.resource.ResourceException:Failed getting the following function metadata from repository: URL_SERVER_TYPE_DATA_GET
Any help would be appreciated.
Thanks

Hello,
Is the WP-PI addon installed or is the backend system on basis 6.40?
WP-PI in pre NW is a prerequisite for UWL.
BR,
Thomas Mouritsen

Similar Messages

Error in UWL while opening workitem

Hi All,
I have implemented a ESS package, have 2 standard workflows Claims and Leave.
I am getting error in UWL while opening workitem (advance claim) in inbox, error is as below:
Service cannot be reached
What has happened?
URL http://stest.hapl.com:8000/webdynpro/dispatcher/sap.com/essinclaims/ClaimAdvanceApproval_IN call was terminated because the corresponding service is not available.
Note
The termination occurred in system DBX with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:stest_DBX_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
UWL connection is fine as workflow is getting trigered and i can see work item in manager's inbox. I have created a dedicated template system for UWL with Web AS as ECC host:port number and Web AS path as /sap/bc/bsp/sap.
And maintained other connector and ITS properties and all connection test successully passed.
As we have only one sever so while creating system using load balacing template, was not able to identify message server name which is to maintained in case load balancing system.
Please help me finding out where can be the issue.
Thanks,
Honey
Thanks
Honey

When registering the system in UWL, specify a WebDynpro Launch System. That should resolve the issue.
WebDynpro Launch System -- create a system of type WAS and mention the WAS host name and WAS path.

ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll and failure to install

I downloaded and extracted the latest ESR file (Version 10.0.7) this morning. Running SETUP.EXE with no command line switches fails to install Firefox. Ths installation log indicates that the installation has taken 1 second to complete execution. In the Installation log I see the following:
DLL Registration
** ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll **
In the C:\Program Files (x86)\Mozilla Firefox folder there is an uninstall folder as well as an install.log file. No other files or folders exist. Mozilla Firefox does appear in the Programs and Features but shows an icon associated with an unknown application.
I am logged in with a low-rights account but running the SETUP.EXE executable from an elevated command prompt. This should be sufficient to elevate the DLL registration.
Running on Windows 7 SP1 with all applicable updates. I've noticed several other people that have experienced this issue but nobody has a solution.
Thanks in advance for any help!

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error Registering Planning and workspace

Hello all,
when I try to register Planning and Workspace against the Shared Services on EPM 11, I get the following error message:
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Would anyone know how to solve that?
Thanks

Hi there,
i am also getting the same exact error message , the only difference is i am getting it while registering the HFM application and for me Planning went through smoothly.
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

Error:Registered login failed for shared services...

Hi All
while i was configuring the Calc Manager after foundation services ,the window display the error:Registered login failed for shared services....
I try to use the correct user name and password for it .check the installation guide for Hyperion version is 11.1.2 .do not know where to look for correct information to make this configuration work.
Any help would be very useful .
Thanks

Which is the process connecting using machine account?
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Error registering ...\DL2DASMS.dll

I'm trying to install PCSuite v.6.8 in spanish, and this error comes up "Error registering module c:\Archivos de programa\Archivos comunes\PCSUite\Datalayer\DL2DASMS.dll. HRESULT -2147221164. Contact with bla,bla,bla..."
Any solution?
Thanks.

This may help you:
/discussions/board/message?board.id=pcsuite&message.id=4215&view=by_date_ascending&page=2

DLL Registration ** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll

Mozilla Firefox Installation Started: 2012-02-02 0:11:25
Installation Details
Install Dir: C:\Program Files\Mozilla Firefox
Locale : en-US
App Version: 10.0
GRE Version: 10.0
OS Name : Windows 7 or above
Target CPU : x86
Removing Previous Installation
Installing Main Files
DLL Registration
** ERROR Registering: C:\Program Files\Mozilla Firefox\AccessibleMarshal.dll **

Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x ESR: http://www.mozilla.org/en-US/firefox/organizations/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Oscinstall.sh error registering providers

oscinstall.sh registers successfully the mail provider, but gives an error registering the calendar provider .
Any ideas ?
Thanks,
Silvio Seifert
oracle@cosu:/oracle/cs/mt/bin> ./ocsinstall.sh <oidadmin> <password>
--* Post Installation Process Started --*
Following steps occur in the order given below when running the post install script
Step1: Compilation of the plsql Package
Step2: Import of the portal objects if not exist
Step3: Registration of the providers if not registered before
Step4: Addition of the portlets for all the newly registered providers
Step5: Gives a complete statistics of the installation process
=== Step1: Compiling plsql scripts for installation ===
Package created.
Package body created.
Commit complete.
Commit complete.
=== plsql scripts for installation Compiled ===
=== Step2: Importing Portal objects if not exist ===
=== Portal Objects Imported ===
=== Step3: Registring Providers ===
Registring Mail Provider ...
This process can take anywhere between few seconds to few minutes
mail provider Registered / updated
Registring Calendar Provider ...
This process can take anywhere between few seconds to few minutes
Exception in thread "main" java.lang.NullPointerException
at oracle.panama.marconi.install.UrlTokenParser.nukeHttp(Unknown Source)
at oracle.panama.marconi.install.UrlTokenParser.checkUrlValidity(Unknown Source)
at oracle.panama.marconi.install.ProvidersManager.registerCalendarProvider(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.manageProvidersAndPortlets(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.startPostInstallation(Unknown Source)
at oracle.panama.marconi.install.OCSPostInstaller.main(Unknown Source)
oracle@cosu:/oracle/cs/mt/bin>

It didn't ask for any parameters.
Here is what i did.
I ran:
C:\Oracle\Middleware\EndecaServer7.6.0.0_1\endeca-data-enrichment\install>enrichment-metadata.bat C:\Java\jdk1.6.0_45 localhost 7001 http C:\Oracle\Middleware C:\Oracle\Middleware\EndecaServer7.6.0.0_1 C:\Oracle\Middleware\user_projects\domains\endeca_base_domain
and the result is:
ECHO is off.
Registering plug-in BlacklistPlugin...
INFO: Registered auditor for componentType=WebServices auditor=oracle.security.jps.internal.audit.DelegateAuditor$XmlAuditor@298eb7e0
and it hangs there.

Error registering OVM Manager 3.2.1 in OEM 12.1.0.2.0

Getting error registering OVM Manager 3.2.1 in OEM 12.1.0.2.0:
4321: Error getting uuid.
Executing command /scratch/apodelko/install/core/12.1.0.2.0/jdk/bin/java -Xmx256m -Djavax.net.ssl.trustStore=/scratch/apodelko/install/agent_inst/sysman/config/montrust/AgentTrust.jks -classpath /scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/emagentSDK.jar:/scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/log4j-core.jar:/scratch/apodelko/install/core/12.1.0.2.0/sysman/jlib/emagentSDK-intg.jar:/scratch/apodelko/install/core/12.1.0.2.0/jlib/gcagent_core.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/OvmClient.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/commons-logging-1.0.4.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-fetchlet-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-ovmintegration-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/../../plugins/oracle.sysman.vt.agent.plugin_12.1.0.4.0/archives/em-vt-ovmintegrationcore-pojo.jar:/scratch/apodelko/install/core/12.1.0.2.0/lib/jsch.jar oracle.sysman.vt.fetchlet.pojo.AsyncOVMWrapper
OVM Manager URL = <sensitive value not to be displayed>
OVM Manager Username = <sensitive value not to be displayed>
OVM Manager Password = <sensitive value not to be displayed>
OVM Manager UUID = <sensitive value not to be displayed>
Manager ID = SyncManager
Method Name = getOvmMgrUuid
Param Types = <sensitive value not to be displayed>
paramValues = <sensitive value not to be displayed>
Retry Count = 0
Retry Sleep Interval = 0
Exception in thread "OVMMConnectionCreatorThread" java.lang.NullPointerException
     at oracle.sysman.vt.ovm.integration.core.OVMMConnectionCreatorValidator$1.run(OVMMConnectionCreatorValidator.java:70)
     at java.lang.Thread.run(Thread.java:662)
Operation failed
oracle.sysman.vt.ovm.integration.api.EMOVMCommunicationServiceException: 1019: Timeout while creating OVM Manager Connection (tcps://server_name:54322). Ensure OVM Manager is running and responsive.
     at oracle.sysman.vt.ovm.integration.core.OVMMConnectionCreatorValidator.create(OVMMConnectionCreatorValidator.java:82)
     at oracle.sysman.vt.ovm.integration.core.OVMManagerConnection.createOvmManagerConnection(OVMManagerConnection.java:359)
     at oracle.sysman.vt.ovm.integration.core.OVMManagerConnection.connect(OVMManagerConnection.java:199)
     at oracle.sysman.vt.ovm.integration.core.AbstractCoreManager.init(AbstractCoreManager.java:55)
     at oracle.sysman.vt.ovm.integration.core.SyncManagerImpl.getOvmMgrUuid(SyncManagerImpl.java:591)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.sysman.vt.fetchlet.pojo.OVMDataFetchletUtil.executeOperation(OVMDataFetchletUtil.java:241)
     at oracle.sysman.vt.fetchlet.pojo.OVMDataFetchletUtil.executeOperation(OVMDataFetchletUtil.java:120)
     at oracle.sysman.vt.fetchlet.pojo.AsyncOVMWrapper.main(AsyncOVMWrapper.java:126)
Exit code: 251
Any idea how to troubleshoot? It looks like the problem is the tcps connection - but I can't find much information about it.
Thanks,
Alex
Edited by: user739062 on Mar 6, 2013 8:01 AM

Thanks a lot for your offer ... i already found a solution. Greetings Helmar
i forgot point 8.
Got it from http://itnewscast.com/register-oracle-vm-manager-oracle-enterprise-manager-12c
very good documentation
Oracle VM Manager Registration Prerequisites
The following prerequisites must be meet before Oracle VM Manager can be registered in Oracle Enterprise Manager 12c Cloud Control Release 1 (12.1.0.1) and above.
1.     Oracle Enterprise Manager Release 1 (12.1.0.1) and above.
2.     The Oracle Virtualization plug-in must be install and enabled on the Oracle Management Service.
3.     The Oracle VM Manager host must have the Oracle Management Agent (OMA) and be a monitored target in Oracle Enterprise Manager 12c Cloud Control.
4.     The Oracle VM Manager host must have the Oracle Virtualization plug-in.
5.     The preferred credentials for the Oracle VM Manager host must be configured in Oracle Enterprise Manager 12c Cloud Control.
6.     The Oracle Management Service and the Oracle VM Manager host must have consistent name resolution using DNS with both forward and reverse lookups.
7.     Oracle VM Manager 3.1 and above require TCPS authentication.
8.     Oracle Enterprise Manager Release 2 (12.1.0.2) and above with Oracle VM Manager 3.1 and above must have the Oracle VM Manager keystore imported into the Oracle VM Manager host's Oracle Management Agent keystore.

[linux-3.2] watchdog: error registering /dev/watchdog

Today, kmod replaced module-init-tools, and after upgrading my system, noticed this error after udev loaded:
Jan 6 07:44:41 localhost kernel: [ 4.528051] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528088] watchdog: error registering /dev/watchdog (err=-16).
Jan 6 07:44:41 localhost kernel: [ 4.528113] mei: unable to register watchdog device.
Thankfully, nothing else happened and my system didn't go kaput. But reading the manpage, watchdog does appear to be important. Since udev errors were expected with the kmod upgrade, and this error never occurred before today (checked my /var/log/everything.log), it appears kmod is the likely culprit.
Edit: Tried posting this to the ML, and discovered that the general public does not have write access to the ML. So if some developer thinks this is important, hopefully that person will see this post.
Last edited by Sara (2012-01-09 00:12:41)

I finally found some time to dig in the kernel source a bit and found that I was wrong. Sorry for the confusion. There's nothing wrong with the Intel MEI watchdog driver and the softdog is not involved at all. The truth is that the watchdog core functions only support 1 watchdog device via /dev/watchdog [1]. If the iTCO_wdt driver would use the watchdog core [2], we'd get the correct "only one watchdog can use /dev/watchdog." message and the IMEI watchdog registration would not be attempted. But it doesn't. It registers in a different way [3] and so the core does not "know" about another watchdog being already registered, attempts to register the IMEI watchdog and fails with the confusing "cannot register miscdev..." message.
The bottom line is that the kernel supports only one watchdog and we (administrators) have to decide which device we want to use.
[1] http://lxr.linux.no/linux+v3.2/drivers/ … dev.c#L344
[2] http://lxr.linux.no/linux+v3.2/drivers/ … dog_core.c
[3] http://lxr.linux.no/linux+v3.2/drivers/ … wdt.c#L854
Last edited by laloch (2012-01-08 15:34:41)

System Registration Error in UWL

Hello All
i am getting following error while trying to register my sap crm system in UWL.:
System SAP_CRM: Tue Jul 29 14:56:18 GMT+05:30 2008
(Configuration)
:org.xml.sax.SAXException:com.sap.engine.lib.xml.parser.Parser
Exception: End of model expected. (value='uwl.task.webflow.BSP
FRAME.SAP_CRM', index=20) (http://www.sap.com/dtds/nw/uwl/,
row:8, col:0)(Attribute 'name' to element 'ItemType',
type='NMTOKEN', defDecl='#REQUIRED',
defValue='')(http://www.sap.com/dtds/nw/uwl/, row:8, col:0)
i am using EP 7.0 and CRM 5.0.
thanks & regards
shankar

The error was resolved after patch upgradation from sp09 to sp17

Unable to register UWL

Hello
We are unable to register the UWL.
Following is the status of current configurations:
1. SSO works fine.
2. JCO to all systems are fine.
3. Unable to register the WebFlowConnector and AlterConnector
The WebFlowConnector has following settings:
System Alias: ECCCLNT500
Connector Type: WebFlowConnector
The error while registering WebFlowConnector is:
System ECCCLNT500: Tue Feb 16 20:14:03 EET 2010
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Tue Feb 16 20:14:03 EET 2010
: No User mapping set up for user USER.PRIVATE_DATASOURCE.un:Administrator system :ECCCLNT500
Is there any specific area to verify?
Another area, which I think is related, Connection Test for Connectors is also failing and gives SSO error. While SSO for users is activated and in working condition. The exact error while testing Connection Test for Connectors is:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards
Yash

Finally, we got it through.
We were doing two major mistakes, and until I myself looked into we were not able to identify the root cause of problem.
The two mistakes we were doing:
1. We had a user communication uwl_service in R/3 but it was missing in portal. Even after we created it, our administrator was logged in as Admin instead of uwl_service.
2. We goofed up the Connector settings:
System Administration -> System Landscape -> Browse to your System (double click on it) -> Select Connector from the Property Catalog
0. Use appropriate group in group. Check with BASIS consultant to know correct Group.
1. In the Logical System Name type the correct Logical System Name. Check with BASIS consultant to know correct Logical System Name.
2. In the message server, instead of Hostname type the IP address of your message server. Check with BASIS consultant to know correct IP Address.
3. Remote Host Type should be set to 3 if the message server is R/3.
4. SAP Client should be client to which you want to connect in Message Server.
5. SID should be the SID of Message Server.
6. Server Port should be the correct port for Message Server. Check with BASIS consultant to know correct Port Number.
7. Rest all settings should be left to defult.
8. To know if these settings are correct, along with BASIS guy perform the following: Logon to portal with an administrator user in EP whos communication user also exist in R/3. Go to System Administration -> Support -> SAP Application -> SAP Transaction -> Select any system, type any R/3 tcode and select SAP GUI for Windows. Click Go!! You should see the TCODE Output on Screen. If yes, you configurations are correct.
It worked for us, hope it works in future for someone else too.
Would like to thank Sandeep for excellent post: /message/6787312#6787312 [original link is broken] , which helped us troubleshoot to great extent.
Thanks
Yash

Error in UWL config help!!

We are having following error in the "Registration for Item Types of Universal Worklist Webflow" iview , when we are trying to configure the UWL,
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.system_configuration/com.sap.netweaver.bc.uwl.uwl_administration_page/com.sap.netweaver.bc.uwl.uwl_webflow_type_admin
Component Name : com.sap.netweaver.bc.uwl.ui.UWLWebflowTypeAdmin
com.sap.netweaver.bc.uwl.admin.IWebflowConfigurationAdmin.getSystems(Lcom/sap/netweaver/bc/uwl/admin/IUWLConfigurationAdmin;)[Ljava/lang/Object;.
Exception id: 06:19_31/01/05_0001_1446750
See the details for the exception ID in the log file
Thank you in advance.

Hi,
I'm trying to configure SAP MDM30 in WebAs 6.40 with Abap and J2ee for which SAP EP6.0 and XI30 are prerequisites.To access SAP MDM30 thru EP60 i have to configure and apply some settings.I'm following the configuration guide "SAP MDM Master Data Harmonization and Central Master Data Management: Configuration Guide for SAP MDM 3.00".
The access to the functions of SAP MDM is controlled by SAP EP.To activate single sign-on i have to create a system for the MDM system template in the system landscape and assign an alias name for it.Then i gave all the necessary settings for J2EE,ITS,WAS,Connector and when i tested the system for connection it gave an error.
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Further i tried to configure UWL for MDM.There are certain tasks to be followed for configuring UWL such as to copy and rename a certain file com.sap.netweaver.bc.uwl.par.bak and then in the UWL Configuration tab create a new entry for the system alias i creates and using the webflow_connector as the connector. Before using the Universal Worklist, the object types for all systems have to be registered in the UWL Administration.But when i register it gave me an error stating that user mapping is not correct. Then i went for user mapping with userid and password.But yet again there was an eror.The user mapping logon data for the user cannot be saved.And then the UWL Administration link displayed an error message for the three ivies in that page.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm/roles/com.sap.pct.mdm.master_data_administrator/com.sap.pct.mdm.workflow_admin/overview/com.sap.netweaver.bc.uwl.uwl_administration_page/com.sap.netweaver.bc.uwl.uwl_webflow_type_admin
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm/roles/com.sap.pct.mdm.master_data_administrator/com.sap.pct.mdm.workflow_admin/overview/com.sap.netweaver.bc.uwl.uwl_administration_page/com.sap.netweaver.bc.uwl.uwl_configuration_admin
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.mdm/roles/com.sap.pct.mdm.master_data_administrator/com.sap.pct.mdm.workflow_admin/overview/com.sap.netweaver.bc.uwl.uwl_administration_page/com.sap.netweaver.bc.uwl.uwl_cache_admin
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
When i searched for the error in forums i found that i have to upgrade my EP from SP9 to SP11.When i did this i lost the UWL Administration link.How to proceed further.
regards
Gopi

Error in UWL configuration for MSS in portal..

HI,
I want to configure UWL in portal so that I can see/approve leave in UWL in MSS. Please let me know how to configure the same.
When I am trying to configure the UWL in system admin> system configuration> Univerasal Worklist Administration, under that i clicked in new button to add my R/3 system, in that popup i mentioned my system alias name of R/3 system and connector as Webflow connector and remaining field i kept as empty and i clicked on save button after that when i click on Register button OR Register item type for all system than I am getting the following error, please let me know what the issue is ?
Error is:
Errors:
System SandBoxCLNT300: Wed Mar 16 09:18:38 IST 2011
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Mar 16 09:18:38 IST 2011
(Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias SandBoxCLNT300. Contact your system administrator.
SandBoxCLNT300 is the system alias of system I have created for R/3. in that system object I am using logon ticket.
Also when i try to test that system , SAP Web AS Connection AND ITS Connection connection are tested properly with green tick but the third parameter Test Connection with Connector is failing and the error is
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Also the transaction iview i created using this system object is coming absolutely proper, than why Test Connection with Connector is failing , please let me know , might be UWL issue is related to this one..
Thanks

Please first let us know if you have done the configuration as per
the Note 779075, Please do this and re register the work items and
let us know.
Make
Check the configuration of SAP_WebDynpro_XSS
Here is the help documentation:
http://help.sap.com/saphelp_nw70/helpdata/en/92
/a88931f2dd4631b9e8d530697d89c9/content.htm
in regards to this parameter.
IF the LeaveRequestApprover application is deployed on the SAP_Local
System, you needed the system alias of SAP_LocalSystem in the
Webdynpro Launch System value. With this setting when the user
manager clicks on the item, it will work fine.
the system SAP_Webdynrpo_XSS should have maintained the WAS properties
with the port of the portal. This is for normal working for
Leave request
"Mapping Logical Systems" in the following documentation:
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/2a/7a754297fdd142e10000000
a1550b0/content.htm
and the "sap-wd-arfc-useSys" bullet point in the following
documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/f4/651741f163f023e10000000a
155106/content.htm
See in bold where it mentions that "The prerequisite for this is that,
in addition to the default JCo connections, you created the new logical
system name with the Web Dynpro Content Administrator and configured it
for the required SAP system." Meaning that there needs to be a JCO
Connection for "SAP_R3_SelfServiceGenerics_MetaData" since these are
the default JCo connections. In this case I kindly ask that you create
the default metadata and model JCO connections for
SAP_R3_SelfServiceGenerics and see if that resolves the issue.

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Error registering UWL

Similar Messages

Maybe you are looking for