Error "Registration information is invalid" when you start Premiere Elements 7 (Windows)
Issue
When you start Adobe Premiere Elements 7 for the first time, Premiere Elements returns the error message "Registration information is invalid. Please reinstall Adobe Premiere Elements."
Solution
Do one of the following solutions:
Solution 1: Install Premiere Elements 7 using the Premiere Elements 7 serial number.
If you purchased Premiere Elements bundled with Photoshop Elements, you may have used the Photoshop Elements serial number included in the pack to install Premiere Elements. Uninstall Premiere Elements and reinstall Premiere Elements using the Premiere Elements serial number.
Note: The Premiere Elements serial number starts with the number set 1143. The Photoshop Elements serial number starts with the number set 1057.
Solution 2: Use a Company Name with 40 single-byte characters or fewer, or 20 double-byte characters or fewer.
When installing Premiere Elements, you are asked to provide a user name, a company name, and a serial number. While the company name field is not a required field for installation, if you choose to enter data, do not enter a name that contains more than 40 single-byte characters or more than 20 double-byte characters.
Note: A single-byte character is any character in the standard ASCII character set. English language characters are all single-byte characters. Double-byte character code uses two bytes to represent one character. The double-byte character set was developed for the Japanese, Chinese, and Korean characters sets. Many extended ASCII characters are also double-byte.
Solution 3: Install Premiere Elements to a location that does not contain extended ASCII characters in the file path.
Do not install Premiere Elements to a location that uses extended ASCII characters in the file path. Extended ASCII characters include characters such as , –, ›, †, ‡, ‘, Ÿ.
Note: The default installation path for Adobe Premiere Elements does not contain extended ASCII characters.
Thanks. I thought of that. But won't I get whammied for registration again? I just registered this at adobe last month after rebuilding a crashed system. In other words, will Adobe know that I've uninstalled it, and therefore have an available license? Thanks for the welcome. I've been a Studio premium user for 3 years, and now that my product is no longer supported....I need support!
Thanks.
Similar Messages
-
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
Have someone same problem with me anot? got any stion to solved it?Nick,
The first thing to try is to
a) Ctrl/Cmd+Alt/Option+Shift during startup,
or (if a) does not work)
b) Move the folder
a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b). -
Registration information is invalid
My problem is the same as one previously posted but I'm not looking for a clean uninstall but a way forward to using software I already have i.e. Premiere Elements 1.0 and 2.0 - help please.
To save me re-typing I have copied below the same thread previously started
After motherboard upgrade, I can't start Premiere Elements 1.0. Gives error message "Registration information is invalid. Please reinstall Premiere Elements." Reinstallation goes fine but after computer restart, program returns same error message. When attempting to uninstall the program, the uninstallation stops at 3/4 way - gives error message "Error 14.02.Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Premiere Elements\1.0\Preset. Verify that you have sufficient access to that key, or contact your support personnel." I am the only user and have full administrator rights. I would like to manually uninstall the pogram but need a list of all the keys in the registry and elsewhere.<[email protected]> wrote in message<br />news:[email protected]<br /><br />> Thanks, but from other threads I've read with related<br />> problems I think I'll just give up on Premiere - not<br />> worth the hastle and cost<br /><br />Just be aware you're judging a product by grotesquely outdated versions. <br />That all said, I'm still using APE 2.0 on one of my newer computers with no <br />problems.
-
CPU at 100% when starting Premiere Elements 10
Hi,
When I start Premiere Elements 10 the program runs at 100% CPU usage. Even when I haven´t opened a project yet. So it is not caching media or something. On the screenshot below you can see my problem. There is no project open but the task "Adobe Premiere Elements.exe" is running at 100%.
This makes my system very slow and instable.
I have a 2GB Pentium D 3.0 GHz and my harddrives have lots of free space (They are not working very hard when using Premiere).
Can anyone help me with this?
DimitriNo, it doesn't barely meet the tech requirements (regardless of Adobe's suggested minimums). It is not adequate to work with this program.
With only 2 gigs of RAM, the program is not only idling but also doing a lot of paging. And, if you've got less than 30 gigs of clean, free, defragmented space, it's also struggling with defragmentation.
It's also possible the Organizer is auto-analyzing your drive and if you've got other programs running in the background (like a live defrag program or an intrusive antivirus program like Norton or McAfee) that could be contributing to the problem. -
MacIntosh photoshop CS2
Issue
When you start Adobe Photoshop, the application returns the error message, "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."
Detail
Photoshop previously started without error.
There is supposed to be a patch for this error message but I have not been able to find it. Help!Without proper system information and other technical details nobody can tell you anything. As a start, read this:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium -
Your download page for 5.0 stated: All of the App Tabs you have set when you close Firefox will open as App Tabs when you start Firefox again.
I liked the convenience of using App Tabs and was disappointed to find that the ones I had set up yesterday were gone today. Am I doing something wrong?Works fine for me, I can simulate your problem by improperly closing Firefox.
The correct way would be to close the windows you don't want and then to exit Firefox through the File ("'''Alt+F'''") menu then use '''Exit''' or '''Qui'''t depending on your system.
But '''I can simulate your problem''' by closing the good window with "X" in the upper right-corner first (the one with the app-tabs) and then close the other window by any means.
You restart Firefox and open a window, since you closed without app-tabs there are none so you just see a window with your home page.
Firefox has some things added to Firefox 4 and therefore in Firefox 5.
# "'''Alt+S'''" (Hi'''s'''tory menu)
# "'''Restore Previous Session'''" (that's the window without the app-tabs, but you have to this first)
# "'''Restore Recently Closed Windows'''" -- can choose which window to reopen based on name and the mouse-over tells how many tabs. or you just use "'''Restore All Windows'''" without the guessing.
''I know you are on a Mac, and this affects Windows user more than anybody else, but it does affect other systems besides Windows, occasionally, perhaps more often now with the plugins container.''
The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
'''Plug-in and tasks started by Firefox may continue after attempting
to close Firefox''' The "X" in the upper right-hand corner closes the
Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
it does not necessarily close Firefox .
The only '''proper way to exit Firefox''' is to use '''Exit''' through the
File menu, not the "X" in the upper right corner of last Firefox window.
In the Firefox 4 and 5 that would be Alt+F then X
* '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
'''Avoiding Problems with close/restart''' ''choose either extension''
:Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
*"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
*For older versions use "'''QuickRestart'''" extension (34 KB download) (<br>https://addons.mozilla.org/firefox/addon/3559/ -
MAC is turned off when you start the application.
MAC выключается при запуске приложений.
MAC is turned off when you start the application.
P.S. it is desirable to give an answer on the Russian
Interval Since Last Panic Report: 69711 sec
Panics Since Last Report: 1
Anonymous UUID: BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 20:28:41 2013
panic(cpu 2 caller 0xffffff80242b7e95): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x00000000053ca068, CR4: 0x00000000001606e0
RAX: 0xffffff8024813e10, RBX: 0x0000000000000001, RCX: 0xffffff80248e04f0, RDX: 0xffffff8024890100
RSP: 0xffffff810cd7b978, RBP: 0xffffff810cd7b9a0, RSI: 0x0000000000000001, RDI: 0xffffff8045a66410
R8: 0x000000000000000e, R9: 0xffffff8045a90908, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff803e98cc02, R13: 0x0000000000000000, R14: 0xffffff803e98cc10, R15: 0xffffff8045a66410
RFL: 0x0000000000010202, RIP: 0x0000000000000000, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff810cd7b610 : 0xffffff802421d626
0xffffff810cd7b680 : 0xffffff80242b7e95
0xffffff810cd7b850 : 0xffffff80242cd4dd
0xffffff810cd7b870 : 0x0
0xffffff810cd7b9a0 : 0xffffff80242772b2
0xffffff810cd7b9d0 : 0xffffff8024585aae
0xffffff810cd7b9e0 : 0xffffff80242f0981
0xffffff810cd7ba30 : 0xffffff80242f0021
0xffffff810cd7ba70 : 0xffffff80242f10d6
0xffffff810cd7baa0 : 0xffffff80242ed939
0xffffff810cd7bac0 : 0xffffff8024515c0a
0xffffff810cd7bb20 : 0xffffff802431112c
0xffffff810cd7bb90 : 0xffffff80242fc5f1
0xffffff810cd7bd90 : 0xffffff80242fc93d
0xffffff810cd7bf50 : 0xffffff80245e063a
0xffffff810cd7bfb0 : 0xffffff80242cdd23
BSD process name corresponding to current thread: installd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST... [Show more]A: MAC is turned off when you start the application.
I took in the store returned MAC. Although when you start offering configure everything from scratch. The OSes can reinstall?
Read other 15 answers
Last night passed out on completion of the work.
Interval Since Last Panic Report: 75071 sec
Panics Since Last Report: 2
Anonymous UUID: BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 23:25:35 2013
panic(cpu 2 caller 0xffffff80036b7e95): Kernel trap at 0xffffff80036102b1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000040001, CR3: 0x0000000079b9d056, CR4: 0x00000000001606e0
RAX: 0x0000000000040001, RBX: 0x000000000000002c, RCX: 0x7fffffffffffffff, RDX: 0xffffff80f546bd88
RSP: 0xffffff80f546bd30, RBP: 0xffffff80f546bd70, RSI: 0x000000000000002c, RDI: 0xffffff80f546bdb0
R8: 0x000000000000001f, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff802a9a6a20, R13: 0x0000000000000001, R14: 0x0000000000000070, R15: 0x0000000000040000
RFL: 0x0000000000010216, RIP: 0xffffff80036102b1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000040001, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f546b9d0 : 0xffffff800361d626
0xffffff80f546ba40 : 0xffffff80036b7e95
0xffffff80f546bc10 : 0xffffff80036cd4dd
0xffffff80f546bc30 : 0xffffff80036102b1
0xffffff80f546bd70 : 0xffffff8003620dc4
0xffffff80f546bda0 : 0xffffff800364f0c1
0xffffff80f546bde0 : 0xffffff8003616786
0xffffff80f546be50 : 0xffffff800361831c
0xffffff80f546be90 : 0xffffff8003635a40
0xffffff80f546bed0 : 0xffffff80039556a7
0xffffff80f546bf40 : 0xffffff8003955449
0xffffff80f546bf50 : 0xffffff80039e063a
0xffffff80f546bfb0 : 0xffffff80036cdd23
BSD process name corresponding to current thread: ubd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: �... [Show more] -
Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]
Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben -
How do I download a movie on iTunes on my ipad, because when it gets to the end of the download it says download error tap to retry but when you retry it still doesn't work.
You can't if you rented and downloaded it on your iPad, you can only watch it on that. From http://support.apple.com/kb/HT1657 :
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Does the rental not show in the iPad's Videos app ? You shouldn't need to go via the iTunes store app. -
Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
ThanksYou can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage") -
When you start Elements 11 organizer, crashes, and forces me to restart the program
When I start 11 elements (organizer), 37,000 photos, my pc hangs. Pc is a 6-core processor, and 16GB of Ram and Windows 7.
For what? not hold so many images in one catalog?Perhaps you need to reset your preferences. See this link:
<http://www.designerdigitals.com/digital-scrapbooking/tips/questions/172/How+can+I+reset+th e++preferences+in+Photoshop+Elements%3F++> -
Diaabling the window that pops up when you start recording
I finally got my friend to try Logic and he loves it, but he complains about the window that pops up when you start recording audio. Its not a problem for me but he swears it annoys him so I told him I would find out if it can be removed. So does anyone know if that window can be disabled?
czarthp wrote:
I finally got my friend to try Logic and he loves it, but he complains about the window that pops up when you start recording audio. Its not a problem for me but he swears it annoys him so I told him I would find out if it can be removed. So does anyone know if that window can be disabled?
I don't think you can remove it. I agree, that would be a nice option to have.
I think though, that if he were to move it over to a corner of the screen, Logic will remember this placement, and whenever he goes into record, it should open up where he left it, hopefully out of the way enough not to bother him so much... -
If you continue to see error 4005, 4013, or 4014 when you restore your device
i continue to see error 4005, 4013, or 4014 when i restore my Iphone 5
If you get the same errors on different computer and with different computers then contact Apple : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support. -
Why does photo information not available when you email a photo?
Why does photo information not available when you email a photo?
How are you mailing from iPhoto? If you have iPhoto set to mail using Mail.app, you can set what will be included, when you mail with Share > Mail:
Maybe you are looking for
-
How to download and upload long text for project, WBS , Network,
Hi all, I have two isssues. 1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's BAPI_PROJECTDEF_GETDETAIL BAPI_PROJECT_GETINFO BAPI_NETWORK_GETINFO BAPI_BUS2054_GETDATA I am ab
-
How to add dynamically a watermark to drm secured file pdf/epub?
Hi, I have found this site http://www.ebook-converter.com/digital-editions-converter.htm and it really works!, so i have question: how to prevent user from doing that? Is there any way to prevent users from snapshotting whole books? Maybe adding user
-
Posting with reconciallation account
hi, how to post the commission amounts of a vendor to their reconciliation's accounts while releasing to accounting from vf02 automatically, may i know the configuration settings in IMG. here customer and vendor is different. Edited by: santosh kumar
-
Repeating: "Trying to get to Comcast email, I get another pop up window stating 'Cannot get on email, report to Comcast, need help, and Error 400. I did; they analyzed, and say it is a Mozilla problem. Can you help? I have found a way to get to my em
-
Mac OSX Lion 10.7.3 finder issue
When I used file>place, the files are greyed out in my finder, until I select "enable all readable files" in the bottom of finder window. In PS5, this does not occur. How to I make enable the default setting in PS6?