Error.....Registry Key :

I have installed J2EE 1.4 SDK
and Sony java SDK
when i open
Go to Start Menu\Programs\Sony Ericsson\J2ME SDK\DeviceExplorer
it cann't open n error : "Registry Key:\software\javasoft\javaenvironment\currentversion\
how can i solved this prob.
thanks...

have uninstalled Sony java SDK
and i installed again but when i open Sony Ericsson\J2ME SDK\DeviceExplorer
it still error : "Registry Key:\software\javasoft\javaenvironment\currentversion\
how can i do? to solve this error..?
thx.

Similar Messages

  • Registry key problem

    Hi Guys,
    I tried to run my java application which has no warnings and errors when compiling. But I got the following errors:
    Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
    has value '1.3', but '1.4' is required.
    Error: could not find java.dll
    Error: could not find Java 2 Runtime Environment.
    Could anyone tell me what's wrong here ? What should I do then ?
    (I am using Win XP.)
    Thanks !

    Do you have 1.4 installed?
    Have you tried going in regedit and changing the value to 1.4?
    Does java.dll exist in your WINNT\System32 directory?
    Jay
    Hi Guys,
    I tried to run my java application which has no
    warnings and errors when compiling. But I got the
    following errors:
    Registry key 'Software\JavaSoft\Java Runtime
    Environment\CurrentVersion'
    has value '1.3', but '1.4' is required.
    Error: could not find java.dll
    Error: could not find Java 2 Runtime Environment.
    Could anyone tell me what's wrong here ? What should I
    do then ?
    (I am using Win XP.)
    Thanks !

  • Registry key CurrentVersion incorrect and cannot find java.dll

    I have been reading the posts in this forum related to similar errors but not quite sure that they address this situation. Here is what I am seeing:
    I have j2sdk 1.4.2_05 on WindowsXP and the HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\CurrentVersion has the value 1.4.2_05. The j2sdk install copied the java.exe to C:\j2sdk1.4.2_05\bin, C:\j2sdk1.4.2_05\jre\bin and C:\Program Files\Java\j2re1.4.2_05\bin folders. It also copied the same file to the windows\system32 folder. So far so good.
    In my windows PATH env. variable, the windows\system32 path comes first . So when on the DOS prompt, I type "java -version" or even "C:\windows\system32\java -version", I get the following error :
    Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
    has value '1.4.2_05', but '1.4' is required.
    Error: could not find java.dll
    Error: could not find Java 2 Runtime Environment.
    However, running
    C:\j2sdk1.4.2_05\bin\java -version OR
    C:\j2sdk1.4.2_05\jre\bin\java -version OR
    "C:\Program Files\Java\j2re1.4.2_05\bin\java" -version
    works and I get the version info for 1.4.2 j2sdk.
    Now I know that prefixing j2sdk bin path to the PATH variable, so that it comes before windows\system32 will set it right. But I think I should not have to do that , if the j2sdk installation has already copied the latest java.exe to the windows\system32 folder. If it was just an issue of java.exe in windows\system32 being in sync with the JRE current version in registry, I think even just "java -version" should have worked. Since that is not working, maybe there is something beyond that. At this time, I do not know what that could be.
    Any suggestions?

    The java.exe file in system32 that's being executed isn't version 1.4.2_05. Either you have multiple copies of java installed, or the install got screwed up.
    Check version and (maybe) just copy the correct file into system32?

  • "Error while registering the Java 2 Runtime Environment registry keys"

    "Error while registering the Java 2 Runtime Environment registry keys"
    I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
    Thanks for your help
    Aaron

    I am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
    I have multiple versions of jre's and jdks on my machine.
    Anyone else seen this problem or know how to resolve it.

  • I can not re-install/ update apple iTunes on my HP PC running Win7-64.  I get a registry key error when installing and am asked to make sure I have access.  IT is a home PC with one user and I have admin priveledges.

    When the updater notified me of an iTunes update, I selected the update option.  The update failed and killed the version I was running.  I have tried for a year to fix the problem without sucess.  I can't completely remove all Apple products.  I can not install any apple products especially iTunes which is the only one I am interested in.
    When I install iTunes now I get a registry key error similar to this:
    I am using a machine where I am the only user and am the Admin.   I have looked at the security settings on this key and see nothing wrond with it or the parent keys.  I tried removing all apple products but ran into similar problems.  At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.

    These ones are tricky. But the following instructions are worth a try.
    First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
    b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
    c. Perform the following actions
    i. Right Click on Components Folder
    ii. Select Permissions
    iii. Select Full Control and Read Permissions options
    iv. Select Advanced Button
    v. Select Owner Tab
    vi. Select to Change Owner to the Administrators
    vii. Check the option “Replace owner on subcontainers and objects”
    viii. Select OK when prompted that it may not change all.
    ix. Select Apply
    x. Select Apply again
    xi. Exit the Registry Editor
    Now try reinstalling iTunes again. Does it go in properly this time?

  • Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up

    I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
    The system cannot find the registry key specified:
    HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
    I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
    Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
    The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
    SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
    Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
    Thanks from NYC -Phil

    did you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor

  • When Installing iTunes I get an Error Message About A Registry Key

    It gives me this error message:
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel.
    I can't find that error listed anywhere on the iTunes support site. How can I fix this?
    Windows XP Pro
      Windows XP Pro  

    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\
    QuickTimePlayerLib.QuickTimePlayerApp\CLSID
    some folks have been having some success with pgfpdwife's technique in the following post:
    pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
    note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
    There are also some instructions on how to back up registry keys in the following document:
    Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows

  • Failed to set security on SQL Server registry key. Error: 2

    Hi,
    I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
    This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
    SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
    SCCM02 – SUP, MP, FSP, SLP
    The SQL2005 on SCCM01 is running under a domain service account called
    domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
    In an effort to resolve the isse I have made this account a Domain Admin.
    I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
    I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
    This is where I get problems.
    I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
    the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
    Failed to set security on SQL Server registry key. Error: 2.
    <11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
    <11-09-2010 22:46:59> Successfully set security on Setup registry key.
    <11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
    <11-09-2010 22:46:59> Successfully set security on Identification registry key.
    <11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
    <11-09-2010 22:46:59> Installing SMS Site Component Manager ...
    <11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
    Configuration Manager\bin\i386\sitecomp.exe>
    <11-09-2010 22:47:01> Started Site Component Manager service
    <11-09-2010 22:47:01> SMS Site Component Manager installation completed.
    <11-09-2010 22:47:01> Done with service installation
    Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
    WebDav and win2008 roles, features all added and server fully patched.
    Despooler.log on SCCM01 seems good and passing keys.
    Tried installing to default path and to shortened path such as C:\SCCM
    The new secondary site is listed in the console and an address can be added for the Secondary Site
    BITS Server Extensions and Remote Differential Compression Features are enabled.
    The Group memberships all appear ok:-
    SCCM01
    Local Admins    
    contains the sec site server SEC01, SCCM01, installation accounts
    SMS_SiteToSiteConnection_001              
    SEC01 (the sec site server)
    SMS_SiteSystemToSiteServerConnection_001                 
    SCCM02
    SEC01
    No Local Admins as a DC
    SMS_SiteToSiteConnection_002              
    SCCM01
    SMS_SiteSystemToSiteServerConnection_002     
    empty
    SQL 2005
    This has the account logged in during installation as a sysadmin
    SCCM02 is also sysadmin
    The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
    therefore the installation cannot complete.
    I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
    Not sure if the fact that SEC01 is a DC may be a factor.
    Appreciate any help if anyone has seen this before or can suggest a resolution.
    Thanks

    After a lot of digging around and head scratching I eventually found the resolution.
    The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
    The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
    let the SQL side of the SCCM install complete a s these were not being created automatically.
    This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
    never install.
    The big clue was eventually contained in the mpfdm.log errors relating to
    **ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER 
    and
    **ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER 
    Thankfully the errors led me to these two blogs:
    http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
    and
    http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
    As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
    links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
    Solutions
    Add the following reg keys to each of your effected secondary sites.
    Inbox Fix
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
    "Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
    "SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box" 
     Asset Intelligence fix:
     Note: you will need to identify the next largest key value. 
    In my example it was key 49
     Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
    "Inbox Name"="Asset Intelligence KB Manager"
    "Relative Path"="inboxes\\AIKbMgr.box"
    "NAL Path"=""
    "User Rights"=dword:00000000
    "Service Rights"=dword:00000004
    "Monitoring Enabled"=dword:00000001
    "Location Type"=dword:00000001
    "Guest Rights"=dword:00000001
    AMT registry Fix.
      Note: you will need to identify the next largest key value. 
    In my example it was key 50
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
    "Inbox Name"="SMS_AMT_PROXY_COMPONENT"
    "Relative Path"="inboxes\\amtproxy.box"
    "NAL Path"=""
    "User Rights"=dword:00000000
    "Service Rights"=dword:00000004
    "Monitoring Enabled"=dword:00000001
    "Location Type"=dword:00000001
    "Guest Rights"=dword:00000001
    Big thanks to Shaun Cassells and John Marcum for these blogs

  • Notification Server error 2, Registry Key not found?

    Hello everyone,
    I've got more of a cosmetic problem as it seems atm. When checking the Component Status, I see some red crosses in a couple of components. Two being SMS_SITE_COMPONENT_MANAGER and SMS_NOTIFICATION_SERVER. The site itself seems to be working okay, although
    it has some problems here and there, but nothing too troubling.
    The first error, located in SMS_SITE_COMPONENT_MANAGER, states that a the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer cannot be written and returns error code 6 - handle invalid.
    The second error, located in SMS_NOTIFICATION_SERVER, states that the above mentioned key cannot be found and returns error 2 - cannot find file specified.
    I've checked the registry and the key is definitely there. I also checked the permissions and local service, system and the Primary Sites computer account have full permissions.
    The Key contains three values:
    - Default - REG_SZ - No Data
    - Reserved 1 - REG_SZ - No Data
    - Reserved 2 - REG_SZ - No Data
    I've found this
    thread that suggests a site reset as the solution, but that was already done two weeks ago and it's currently not an option as this is a live production system.
    Any suggestions?
    Best Regards,
    Fred

    Hi Torsten,
    I'm getting the following entries in sitecomp.log:
    Component SMS_NOTIFICATION_MANAGER is running.
    Writing component specific registry values.
    Cannot get copy of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer registry key on server V000C00001.ODIE.CORP.DIR. The operating system reported error 6: The system cannot find the file specified.
    STATMSG: ID=579 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_COMPONENT_MANAGER" SYS=site.domain.com SITE=P00 PID=12940 TID=4816 GMTDATE=Mon May 05 07:35:25.898 2014 ISTR0="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    Component SMS_NOTIFICATION_SERVER is running.
    I've also checked bgbserver.log and I'm getting the following entries there:
    Register a DB connection...
    BgbServerController COM wrapper object 59429902 is successfully initialized
    Error: CBgbServer::ReadRegistrySettings - Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer on the server. The operating system reported error 2:
    STATMSG: ID=578 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_NOTIFICATION_SERVER" SYS=site.domain.com SITE=P00 PID=8440 TID=11628 GMTDATE=Mo Mai 05 09:11:07.219 2014 ISTR0="HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    Error: Failed to read settings from registry
    Failed to initialize BGB server. Wait 300 seconds to do initialization again
    Hope this helps somehow.

  • SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

    i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
    i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service  with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the  SQL Server
    Reporting Services Application services i got the below error :
    "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
    any kind of help would be much appreciated .

    I'm having the same issue, but to me it seems like the instructions I've seen are all over the place.  I already have SP 2013 and SQL 2012 SP 1 installed.  I already added the features for Reporting Services - Sharepoint and Reporting Services
    Add-in for SharePoint Products.  I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy. 
    My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
    Then when I read this about installing the BI features
    http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed.  Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option?  I have the PowerPoint
    Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits:  SP 2013 EE is required.  Which I have EE.
    Is Reporting Services different or in addition to the BI Feature (PowerPivot)? 
    Have I missed a step?
    Thanks for you help.
    Kim
    Kim.Williams

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • Unable to write to registry key for Acrobat XI - error 1406

    Hi all,
    I have a problem regarding the installation of Adobe Acrobat XI 11.0.07 on an ASUS laptop with Windows 7 Home Premium OS.
    In short, I am unable to complete the installation of Adobe Acrobat XI on this machine because Acrobat is not able to write the value to the registry key situated here:
         HKEY_LOCAL_MACHINE --> SOFTWARE --> Microsoft --> Internet Explorer --> Toolbar.
    I tried to find solutions on the internet, and have found one webpage at the Adobe Forums, which is this one: Error 1406.Could not write value Adobe ARM - and it was not very helpful, since the person asking solved his problem, but did not tell how he did. So, I found this page at Acrobat Help, called Error 1402 | Error 1406 | Acrobat, Reader where I tried the different solutions, but so far none of these have worked. What I did was to remove all previous versions of Adobe Acrobat, Reader, Air and so on. In fact, I deleted all software from Adobe in case one of these softwares were to blame, but it has not worked. But before I deleted all this software, I deleted Acrobat and Reader several times, but as you probably already have found out, it did not work. As this did not work, I tried the next solution at Acrobat Help, which was to "Set permissions to their defaults in the registry". I followed the solution completely and did everything it said, but it has not worked. As a note, I have to say that the registry key type I have problems with is called "Locked", the type is REG_DWORD and the data value is (0). Does this have anything to do with it? I am not too familiar with editing the registry. Though, I did try to change the value to (1) and updating the registry, but it did not work...
    More information: nevertheless if I install the complete version of Adobe Acrobat XI or the typical installation, the same error comes up: error 1406. And I did scan my system with my antivirus software, called Bullguard, to see if there were any viruses; there were none. I also closed my antivirus software and diabled the firewall of Bullguard, but that was not succesful either, and I did a scan of my system using cmd as an administrator (sfc /scannow), and the program found some errors it could not fix. As far as I can see, it found three .dll files with errors. I have the document called sfcdetails.txt if that would be any helpful to you.
    Besides that, I am not sure what to do. I did pay for Adobe Acrobat the 23rd of January, 2015, and I have not managed to make it work properly yet, and I cannot update the software, since I have this problem with the registry. I am able to use the software for what I had to use it for until now, but I would like to be able to use it for everything it stands for and update it to prevent any lapse in security.
    Thank you. I hope you have any ideas for my problem and will be able to help me!
    Best regards,
    Mads

    Hi Rahul,
    Thank you for your answer. Though, it did not solve my problem! I did what you said: I tried using the Adobe Acrobat cleaner tool, and afterwards, I restarted my computer. After this, I downloaded the program from your link and I tried to install the program, but I did not succeed, because the same error came up, which is this:
         Error 1406. Could not write value {47833539-D0C5-4125-9FA8-0819E2EAAC93} to key \SOFTWARE\Microsoft\Internet Explorer\Toolbar.
    With this error, the only options are to abort, retry or ignore the install, but none of these solves the issue, I am afraid.
    But what I think it is all about is how to gain access to the registry. I followed the tutorial, I mentioned above, but I were not able to solve it... I gained administrator access to the registry, I made the current administrator account the owner of the key (the current administrator is not the original administrator of the computer, since I changed this long time ago), and I made the permissions correctly, I guess. I followed the tutorial, anyhow. Though, what confuses me, is that when pressing the button, called "Advanced", and entering the menu called "Advanced security settings for Toolbar" (I have the Danish version of Windows, excuse me if I did not translate it correctly), I see many persmission posts, two of which have the name of the current administrator account. One of these have full control, the persmissions from this are not inherited and they are used on "this key and underkeys". The second only has a special permission, it is inherited from "MACHINE\SOFTWARE\..." and it is used only on this key. How to change this, I am not sure. But I do not suspect that there should be two permissions for the same administrator account? Do you know if this is right?
    Thank you.
    Best regards,
    Mads

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • Search Server Error - Illegal operation attempted on a registry key that has been marked for deletion

    Hello,
    I have a 5 server farm (DC, 2 WFEs, 1 SQL,1 CA w/ search) and am experiencing an issue when returning search results.  This issue just started occurring recently, and basically the search page throws a correlation id whenever used.  The error returned
    is:
    SearchServiceApplication::Execute--Exception: System.Runtime.InteropServices.COMException (0x800703FA): Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
    SearchServiceApplicationProxy::Execute--Error occured: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA) (Fault Detail
    is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.Runtime.InteropServices.COMException: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
    I even attempted to create an out of the box enterprise search site with OOB masterpages and I still am receiving this error.  
    I have also tried the  ‘Do not forcefully unload the registry at user logoff’ registry edit, but it did not work.
    Has anyone ran into this issue and has another solution other than the ‘Do not forcefully unload the registry at user logoff’ registry edit?
    Thanks!

    IISReset works for me (but after some time it fails again)
    Check this posts: http://pacsharepoint.com/2011/11/sharepoint-search-illegal-operation.html
    http://blogs.msdn.com/b/distributedservices/archive/2009/11/06/a-com-server-application-may-stop-working-on-windows-server-2008.aspx
    hope it helps,

  • Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

    Dear Expert,
    I setup SharePoint for 3 tiers, WFE, APP + DB Server.
    I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
    I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx  but I stuck in no.2, I cannot start the services, in picture below.
    I checked the SSRS provision is disabled not online
    Please help.

    Hi MasterBird,
    According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
    As this
    article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
    hosts an instance of the Database Engine.
    Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
    SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
    Installing SSRS 2012 in SharePoint Mode on SP2010
    If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
    Troubleshoot a Reporting Services Installation.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for