Error (Rejection) Report (QM Module)on Daily Basis

Dear All,
I have been assigned the development of a Daily Defects (Rejection) Report for the QM module. A similar SAP standard report MCXX (RMCQ0900) is available but that gives the result on monthly basis while our requirement is of daily basis.
I had a look on the code of this standard report(RMCQ0900)
and found that the code for 'daily report' has also been written with in it. In the selection-screen also select-option for 'daily report' is present and enabled but there it shows some incosistencies. I tried to remove these inconsistencies by copying the standard report to a ZReport and edit the same but I couldn't.
Can anyone help me on this?
regards,
Alok.
Can anyone provide the logic for the same.
Thanx in advance.
Alok.

Hi,
Please check the report ME80FN. or any standard report ME2L/ME2M etc will give the details.If not check the table EKBE.
Regards,

Similar Messages

  • CF 6.1 - JRUN Closed Connection/Server errors occurring on a daily basis

    We seem to be having issues with Jrun Closed Connection/Server errors occuring on a daily basis now. The server will stop responding to requests until the ColdFusion service is restarted.
    We're using CF 6.1, the following error message is from the log files and seems to be Java/JVM related but I was hesitant to make any changes to the JVM parameters.
    Any suggestions on how to resolve this daily issue of restarting CF service? Other than upgrading to more recent version of CF which we'll be doing later this year.
    Thanks,
    Dave
    >>>>>>>>>>>>
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77FCAFF8
    Function=[Unknown.]
    Library=C:\WINNT\system32\ntdll.dll
    NOTE: We are unable to locate the function name symbol for the error
          just occurred. Please refer to release documentation for possible
          reason and solutions.
    Current Java thread:
              at java.io.WinNTFileSystem.list(Native Method)
              at java.io.File.list(File.java:915)
              at coldfusion.mail.MailSpooler.refreshSpoolFiles(MailSpooler.java:1484)
              at coldfusion.mail.MailSpooler.run(MailSpooler.java:897)
              at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
              at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:70)
    Dynamic libraries:
    0x00400000 - 0x0040F000           C:\CFusionMX\runtime\bin\jrun.exe
    0x77F80000 - 0x77FFC000           C:\WINNT\system32\ntdll.dll
    0x7C570000 - 0x7C624000           C:\WINNT\system32\KERNEL32.dll
    0x7C2D0000 - 0x7C335000           C:\WINNT\system32\ADVAPI32.dll
    0x77D30000 - 0x77D9F000           C:\WINNT\system32\RPCRT4.dll
    0x78000000 - 0x78045000           C:\WINNT\system32\MSVCRT.dll
    0x08000000 - 0x082A7000           C:\CFusionMX\runtime\jre\bin\server\jvm.dll
    0x77E10000 - 0x77E6F000           C:\WINNT\system32\USER32.dll
    0x77F40000 - 0x77F7D000           C:\WINNT\system32\GDI32.dll
    0x77570000 - 0x775A0000           C:\WINNT\system32\WINMM.dll
    0x10000000 - 0x10007000           C:\CFusionMX\runtime\jre\bin\hpi.dll
    0x00770000 - 0x0077E000           C:\CFusionMX\runtime\jre\bin\verify.dll
    0x00780000 - 0x00798000           C:\CFusionMX\runtime\jre\bin\java.dll
    0x007A0000 - 0x007AD000           C:\CFusionMX\runtime\jre\bin\zip.dll
    0x39A70000 - 0x39A7F000           C:\CFusionMX\runtime\jre\bin\net.dll
    0x75030000 - 0x75044000           C:\WINNT\system32\WS2_32.dll
    0x75020000 - 0x75028000           C:\WINNT\system32\WS2HELP.DLL
    0x782C0000 - 0x782CC000           C:\WINNT\System32\rnr20.dll
    0x77980000 - 0x779A5000           C:\WINNT\system32\DNSAPI.DLL
    0x75050000 - 0x75058000           C:\WINNT\system32\WSOCK32.dll
    0x77340000 - 0x77353000           C:\WINNT\system32\iphlpapi.dll
    0x77520000 - 0x77525000           C:\WINNT\system32\ICMP.dll
    0x77320000 - 0x77337000           C:\WINNT\system32\MPRAPI.dll
    0x75150000 - 0x75160000           C:\WINNT\system32\SAMLIB.DLL
    0x7CDC0000 - 0x7CE10000           C:\WINNT\system32\NETAPI32.DLL
    0x7C340000 - 0x7C34E000           C:\WINNT\system32\Secur32.dll
    0x77BF0000 - 0x77C01000           C:\WINNT\system32\NTDSAPI.dll
    0x77950000 - 0x7797B000           C:\WINNT\system32\WLDAP32.DLL
    0x751C0000 - 0x751C6000           C:\WINNT\system32\NETRAP.dll
    0x7CE20000 - 0x7CF0F000           C:\WINNT\system32\OLE32.DLL
    0x779B0000 - 0x77A4C000           C:\WINNT\system32\OLEAUT32.DLL
    0x773B0000 - 0x773DF000           C:\WINNT\system32\ACTIVEDS.DLL
    0x77380000 - 0x773A3000           C:\WINNT\system32\ADSLDPC.DLL
    0x77830000 - 0x7783E000           C:\WINNT\system32\RTUTILS.DLL
    0x77880000 - 0x7790E000           C:\WINNT\system32\SETUPAPI.DLL
    0x7C0F0000 - 0x7C154000           C:\WINNT\system32\USERENV.DLL
    0x774E0000 - 0x77514000           C:\WINNT\system32\RASAPI32.dll
    0x774C0000 - 0x774D1000           C:\WINNT\system32\rasman.dll
    0x77530000 - 0x77552000           C:\WINNT\system32\TAPI32.dll
    0x71710000 - 0x71794000           C:\WINNT\system32\COMCTL32.DLL
    0x70A70000 - 0x70AD6000           C:\WINNT\system32\SHLWAPI.DLL
    0x77360000 - 0x77379000           C:\WINNT\system32\DHCPCSVC.DLL
    0x777E0000 - 0x777E8000           C:\WINNT\System32\winrnr.dll
    0x777F0000 - 0x777F5000           C:\WINNT\system32\rasadhlp.dll
    0x39FB0000 - 0x39FBC000           C:\CFusionMX\runtime\bin\portscan.dll
    0x74FD0000 - 0x74FED000           C:\WINNT\system32\msafd.dll
    0x75010000 - 0x75017000           C:\WINNT\System32\wshtcpip.dll
    0x3AAC0000 - 0x3AAC5000           C:\CFusionMX\runtime\jre\bin\rmi.dll
    0x3B9D0000 - 0x3B9D6000           C:\CFusionMX\runtime\jre\bin\ioser12.dll
    0x3BBE0000 - 0x3BC60000           C:\CFusionMX\lib\izmjniado.dll
    0x3C270000 - 0x3C278000           C:\CFusionMX\lib\CFXNeo.dll
    0x780A0000 - 0x780B2000           C:\WINNT\system32\MSVCIRT.dll
    0x780C0000 - 0x78121000           C:\WINNT\system32\MSVCP60.dll
    0x3C280000 - 0x3C28B000           C:\CFusionMX\lib\cfregistry.dll
    0x3C3A0000 - 0x3C3A8000           C:\CFusionMX\lib\PerfmonClient.dll
    0x3C5C0000 - 0x3C5CC000           C:\CFusionMX\lib\cfindex.dll
    0x3C5D0000 - 0x3C7C2000           C:\CFusionMX\lib\vdk200.dll
    0x3C7D0000 - 0x3C805000           C:\CFusionMX\lib\LIBALLRSEI.dll
    0x7CA00000 - 0x7CA23000           C:\WINNT\system32\rsaenh.dll
    0x7C740000 - 0x7C7CC000           C:\WINNT\system32\CRYPT32.dll
    0x77430000 - 0x77441000           C:\WINNT\system32\MSASN1.dll
    0x3EE10000 - 0x3EE3E000           C:\CFusion\CustomTags\GetUserGroups.dll
    0x77800000 - 0x7781E000           C:\WINNT\system32\WINSPOOL.DRV
    0x76620000 - 0x76631000           C:\WINNT\system32\MPR.DLL
    0x7CF30000 - 0x7D176000           C:\WINNT\system32\SHELL32.dll
    0x3F650000 - 0x3F75A000           C:\CFusionMX\runtime\jre\bin\awt.dll
    0x75E60000 - 0x75E7A000           C:\WINNT\system32\IMM32.dll
    0x3F760000 - 0x3F7B0000           C:\CFusionMX\runtime\jre\bin\fontmanager.dll
    0x72800000 - 0x72846000           C:\WINNT\system32\ddraw.dll
    0x728A0000 - 0x728A6000           C:\WINNT\system32\DCIMAN32.dll
    0x72CF0000 - 0x72D84000           C:\WINNT\system32\D3DIM700.DLL
    0x690A0000 - 0x690AB000           C:\WINNT\system32\PSAPI.DLL
    Heap at VM Abort:
    Heap
    PSYoungGen      total 5824K, used 1523K [0x10010000, 0x10800000, 0x138f0000)
      eden space 3520K, 26% used [0x10010000,0x100fa4e0,0x10380000)
      from space 2304K, 25% used [0x105c0000,0x106528b0,0x10800000)
      to   space 2304K, 0% used [0x10380000,0x10380000,0x105c0000)
    PSOldGen        total 29824K, used 22612K [0x138f0000, 0x15610000, 0x30010000)
      object space 29824K, 75% used [0x138f0000,0x14f051e0,0x15610000)
    PSPermGen       total 20736K, used 20580K [0x30010000, 0x31450000, 0x38010000)
      object space 20736K, 99% used [0x30010000,0x314293b0,0x31450000)
    Local Time = Fri Dec 13 13:50:53 2013
    Elapsed Time = 19424
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Server VM (1.4.2-b28 mixed mode)
    space 3520K, 26% used space 2304K, 25% used space 2304K, 0% used space 29824K, 75% used space 20736K, 99% used# An error report file has been saved as hs_err_pid2920.log.
    # Please refer to the file for further information.

    CF6, Java 1.4.2 and Windows NT - have not seen those for a long time myself.
    Perhaps this is the issue from error report:
    PSPermGen       total 20736K, used 20580K
    object space 20736K, 99% used
    I guess Java non heap space Permanent Generation is full the next object trying to load into that space can’t fit, plus all the objects in there are referenced so no objects can be removed so free space can’t be made available. One would need to do some work with Java logging and know what JVM.CONFIG looks like to know if that guess is accurate.
    You could try increase that parameter 10Mb or so and see what happens? In JVM.CONFIG, JVM args, -XX:MaxPermSize=NNm where NN = numbers.
    Needless to say you are running a lot of end of life product and should plan to migrate to something more current.
    HTH, Carl.

  • How to autogenrate multiple items report of the SharePoint list and sent to the client id on daily basis

    Dear Support,
    As per customer requirement he want to send SharePoint list multiple items reports on daily basis by email autognrated workflow in SharePoint.
    I tried for that and created workflow for SharePoint list  on new item creation using SharePoint designer 2013 it’s working fine. But I am unable to send list multiple items report by work flow.
    Please let me know the process for SharePoint list multiple items report generation and how to sent mail to the client id on daily basis.
    Would request your support.

    Hi
    another approach
    use a powershell scheduled script which will get needed lists items, adn will sned the infos by email
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • QM Module- Inspection Rejection Report

    Hi all
      I am looking for a QM MODULE INSPECTION REJECTION REPORT. If any one having it ,Please do send me the codes..
    Thanks in advance.
    Arun.j

    maybe this will help u
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=qmMODULEINSPECTIONREJECTIONREPORT&cat=sdn_all

  • I want to save several written reports for my job on a daily basis on my iPad from my computer is there an app or anyway to do this? Organize,rename and save documents to my iPad?

    I scan several reports on a daily basis to my computer I wanted to know is there any app or anyway I can save these documents to my iPad and make sure they are backed up? Also I would like to organize them by name and date is there an app out there that can do this or anyway? I work in a court house with several reports on a daily basis any help please?

    I just have the normal app and have had no issue with it. I think the only bug I've heard of is sometimes people start a new document and the Docs to Go will not acknowledge the input of a wifi keyboard until you type a few characters on the on screen keypad, but that may have been fixed.
    I find documents easy to find. I have two main folders on my iPad, the desktop folder which has my 'to be kept synced' documents and then another folder with the documents i've put on it permanently. It lists them alphabetically  so my only issue finding things is scrollling down 300+ documents.
    One thing that I think the premium app has is the ability to access documents via  the internet.
    How I do it is, I have my document in the sync folder. I open up the docs to go desktop app, open up docs to go on the iPad, tap the sync button and the documents sync...so you do have to have wifi. not sure if that's an issue or not. It's never taken me more than a few seconds to sync.
    I do konw that you can buy the basic version and upgrade for the cost difference, so you can always experiment and upgrade if necessary.

  • Error is "Report Contents No data

     error is "Report Contents No data

    Hi Godavari,
    Firstly, make sure there are some events happened in the day you selected and mathcing with the options you set.
    I could reproduce your issue if I don't do any events in the day I set in the custom report.
    So, please try to do some actions based on the options in the custom report you set, then go to Audit log report to run a custom report based on the current day, compare the result.
    Note: Audit log reports only log the events which are happened after you enable Audit log reports.
    If the report still doesn't contain data, please check the log file to find more information base on the Correlation ID.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Best way to Insert Millions records in SQL Azure on daily basis?

    I am maintaining millions of records in Sql Server 2008 R2 and now i am intended to migrate these on SQL Azure.
    In existing system with SQL Server 2008 R2, few SSIS packages and Stored Procedures are firstly truncate the existing records and then perform Insert operation on the table which holds
    approx 26 Million records in 30 mins. on Daily basis (as system demands).
    When i migrate these on SQL Azure, i am unable to perform these operations in a
    faster way as i did in SQL 2008. Sometimes i got Request timeout error.
    While searching for faster way, many of them suggest for Batch process or BCP. But Batch processing is NOT suitable in my case because it takes much time to insert those records. I required some faster and efficient way on SQL Azure.
    Hoping for some good suggestions.
    Thanks in advance :)
    Ashish Narnoli

    +1 to Frank's advice.
    Also, please upgrade your Azure SQL Database server to
    V12 as you will receive higher performance on the premium tiers.  As you scale-up your database for your bulk insert, remember that
    SQL Database charges by the hour. To minimize costs, scale back down when the inserts have completed.

  • OBIEE 11.1.1.6.12 - save analysis in Excel file into Windows share folder on daily basis

    Hi all,
    how do I save analysis in Excel file into Windows share folder automatically on daily basis? Also my need is to automatically set prompt date in analysis as "sysdate - 1" (yesterday) before saving. Is it possible at all?
    OBIEE 11.1.1.6.12

    Set the report level filter using date
    as current_date-1
    to save file check this OBIEE 11g – Export To The File System : Total Business Intelligence

  • Report painter execution error - KH014  "Report does not exist".

    Hi All,
    I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
    Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
    While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
    Has anyone encountered similar problem? How was it resolved?
    Thanks.
    Prashant

    Hi Mikko,
    Thanks for your reply but your solution is not working.
    Hi Stacy,
    I can execute the report from t codes like FSI3 & FSI0 in development.
    I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
    Please let me know if this is wrong method or there is any other option to transport this report in Production.
    Thanks & Regards,
    Prashant

  • Compilation error - FPGA NI PXI-7951R board - ERROR: Xst: 2472 - Top module Puma15Top was not found.

    I'm trying to compile a "user CLIP socket" for the NI PXI board - 7951R which has a Virtex-5 LX30 FPGA from Xilinx, but I got the bellow message from NI Compiler, this message is in error report Xilinx.log.
    It says that module Puma15Top was not found.
    But this module is a NI property and is automatically compiled by NI Compiler.
    The compiler automatically generates these files (Puma15Top...) that are passed to the compiler of Xilinx. The Puma15Top files are in the path, i.e: C: \ NIFPGA \ compilation \ Told_F_I_CC5DC260 \ source_files.
    This folder name is automatically generated by labview (Told_F_I_CC5DC260) for each different project or compilation.
    So I have no way to configure in CLIP files where it'll be Puma15Top, once the path is automatically generated during compilation by Labview.
    Does anyone have any idea how to solve this problem? Or have you experienced some like this?
    Following error log:
    ### XstSynthesis ###
    Puma15Top
    Reading design: Puma15Top.prj
    =========================================================================
    *                          HDL Compilation                              *
    =========================================================================
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_Conf.vhd" in Library work.
    Entity <CLUC001_Conf> compiled.
    Entity <CLUC001_Conf> (Architecture <behavioral>) compiled.
    Compiling vhdl file "C:/NIFPGA/jobs/Cm9xA8x_LaF6U1d/CLUC001_CLIP.vhd" in Library work.
    Entity <CLUC001_CLIP> compiled.
    Entity <CLUC001_CLIP> (Architecture <rtl>) compiled.
    Entity <CLUC001_CLIP> (Architecture <behavioral>) compiled.
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Thanks in advanced!

    Hi Guilherme,
    Thanks your suggestion, I upgraded NI-RIO to 13.1.1 version but the problem persists, as shown below:
    Project: T_old.lvproj
    Target: F (RIO0, PXI-7951R)
    Build Specification: I_2
    Top level VI: I.vi
    Compiling on local compile server
    Compilation Tool: Xilinx 11.5
    Start Time: 2/9/2014 18:03:51
    Run when loaded to Fpga: FALSE
    JobId: z8Cq8B4
    Working Directory: C:\NIFPGA\compilation\Told_F_I2_F3177096
    Compilation failed due to a Xilinx error.
    Details:
    ERROR:Xst:2472 - Top module <Puma15Top> was not found.
    ERROR:Xst:2469 - Please specify the correct library via the -work_lib switch.
    -->
    Total memory usage is 149596 kilobytes
    Number of errors   :    2 (   0 filtered)
    Number of warnings :    0 (   0 filtered)
    Number of infos    :    0 (   0 filtered)
    Process "Synthesis" failed
    Start Time: 18:03:51
    End Time: 18:05:19
    Total Time: 00:01:27,414
     Best,
    JEMP

  • Getting error in the function module

    Hi everybody.
    I have created one function module in se37 and i am calling that function module in the se38 report, when i am executing the report it is throwing me an error.
    here in my report i am having the select option fields ex matnr, in the function module importing i have given the parameter matnr over there and when i am running the report it is through an error that 
    "The function module interface allows you to specify only 
    fields of a particular type under "MATNR".               
    The field "S_MATNR" specified here is a different        
    field type                                                "
    IF i am giving the parameter instead of select-options in the report and executing, then the function module is getting triggered and receiving the data what ever the code is available in the source code.
    can anyone help me out in this issue so that i can get the data while using the select-option instead of parameter.
    Thanks in advance

    Hi,
    Actually, I wouldn't recommend the use of that tables parameter...
    From sap help:
    Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
    Exceptions
    So i definitely would go with either importing or changing parameter...
    Cheers,
    m.

  • Currency Conversion on Daily Basis

    Hello
    We have data in 4 different currencies in transactions level and I have a requirement in BW to convert the currency on Daily basis based on that day's exchange rate.
    And Also I should be giving the user a selection option to pick a currency type, so that the report will display in that currency.
    Can someone please tell be the best approach to do this?
    Thanks
    Kumar

    Hi,
    Please refer the following How to doc...This is the best possible way you can do..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
    Thanks
    Vj
    You can apply the same for Currency conversions too
    Message was edited by:
            Vijay kumar Nandipati

  • FR error:  *Error: invalid report object*

    Hi All,
    When we run the report we are getting error "*Error: invalid report object*. It is for one specific entity at the base level for some user's. Other user's can able to view the data at that leve. All the user's have same level of access. can someone help......
    Thanks in advance.
    Moh

    You are most likely getting this error because you have a report object trying to reference a value out of a datagrid or a POV that doesn't have any data for the given entity.
    When you run it for an entity with data in the grid, everything works great. When you run it for an entity with no data, the datagrid essentially doesn't exist and references to it will fail with the error you have shown.
    A good example of this is when you have a header and you pull parts of the header from a grid such as showing the scenario, etc. To do this you reference a row (or column) from the datagrid, etc.....
    Charles

  • ERROR  WHILE ACTIVATING  FUNTIONAL MODULE

    HI everybody,
    i have created one functional module
    code is correct
    but at last while activating i am getting error like
    'REPORT OR PROGRAM STATEMENT MISSING OR PROGRAM TYPE IS
    I(INCLUDE).
    COULD U PLZ SUGGEST ME HOW TO SOLVE THIS ERROR
    REGARDS
    HRIDHAYANJILI.

    Hello,
    Go to the main program of the Funtion module. and do activate. Select all the deactivated programs related to Function group and then press activate.
    Regards,
    Naimesh

  • Error: An unreported error occurred in Appc. No errors were reported.

    Hello Experts,
    Had an error in my jdeveloper 11.1.2.0.0
    Error: An unreported error occurred in Appc. No errors were reported, but the tool returned a failure result code: 1.
    Warning: <Jun 6, 2012 9:32:42 AM EDT> <Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\Fido\PortfolioTurnover\pt_application\ViewController\public_html/WEB-INF/web.xml of module public_html. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed     at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:161)     at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)     at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)     at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)     at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)     at weblogic.application.descriptor.AbstractDescriptorLoader2._mergeDescriptors(AbstractDescriptorLoader2.java:562)     at weblogic.application.descriptor.AbstractDescriptorLoader2.mergeDescriptors(AbstractDescriptorLoader2.java:500)     at weblogic.application.descriptor.AbstractDescriptorLoader2.mergeDescriptors(AbstractDescriptorLoader2.java:477)     at weblogic.servlet.internal.WebAppDescriptor.mergeLibaryDescriptors(WebAppDescriptor.java:179)     at weblogic.application.compiler.WARModule.mergeDDFromLibraries(WARModule.java:358)     at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:402)     at weblogic.application.compiler.WARModule.compile(WARModule.java:237)     at weblogic.application.compiler.flow.SingleModuleCompileFlow.proecessModule(SingleModuleCompileFlow.java:18)     at weblogic.application.compiler.flow.SingleModuleFlow.compile(SingleModuleFlow.java:36)     at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)     at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)     at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)     at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:29)     at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:112)     at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:37)     at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)     at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)     at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)     at weblogic.application.compiler.Appc.runBody(Appc.java:203)     at weblogic.utils.compiler.Tool.run(Tool.java:158)     at weblogic.utils.compiler.Tool.run(Tool.java:115)     at weblogic.application.compiler.Appc.main(Appc.java:262)     at weblogic.appc.main(appc.java:14)Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.FilterBeanImpl@8e675df6(/Filters[JpsFilter])"     at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)     at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:539)     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:381)     at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)     at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:140)     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:200)     at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:169)     at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)     at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:150)     ... 30 moreCaused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.FilterBeanImpl@8e675df6(/Filters[JpsFilter])"     at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)     at weblogic.j2ee.descriptor.WebAppBeanImpl.setFilters(WebAppBeanImpl.java:715)     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)     at java.lang.reflect.Method.invoke(Method.java:597)     at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)     ... 38 more.>
    Warning: <Jun 6, 2012 9:32:42 AM EDT> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
    Warning: Bean already exists: "weblogic.j2ee.descriptor.FilterBeanImpl@8e675df6(/Filters[JpsFilter])"
    Error Shown in Messages
    [9:32:40 AM] Appc compilation begin
    Compiling out of process...
    C:\oracle\Middleware1.1.2.0\jdk160_24\jre\bin\javaw.exe -Xms128m -Xmx512m -Xverify:none -client -classpath C:\oracle\Middleware1.1.2.0\jdk160_24\lib\tools.jar;C:\oracle\Middleware1.1.2.0\wlserver_10.3\server\lib\weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@C:\Users\santosh\AppData\Local\Temp\appcCommandList2885624487700395398.txt"
    [9:32:42 AM] Appc compilation end
    Writing task flow registry 'file:/C:/Fido/PortfolioTurnover/pt_application/ViewController/classes/META-INF/task-flow-registry.xml'
    [9:32:42 AM] Compilation complete: 1 errors, 3 warnings.
    Any reply please....

    @Sudipto Desmukh well that seams to be the problem :)
    @933601     Check your web.xml file for any errors (e.g. unclosed tags). when you open the web.xml fiel the right hand gutter should show a green quad. If this is Ok then check hte task-flow-Registry.xml file for errors.
    Timo

Maybe you are looking for