Error related to FM LCR_LIST_BUSINESS_SYSTEMS
Hi all,
Friends, when i am running the FM "LCR_LIST_BUSINESS_SYSTEMS" without "bypassing_cache" parameter it is working fine it is showing me all the business systems defined in the SLD but when i am checking "bypassing_cache" parameter it is throwing an error message :
Exception : LD_ERROR
Message : Internal Error in Landscape Directory ..
Actually i am running a ABAP proxy and on runtime this error message was thrown :
System Fault :
An error occurred when determining the business system (LD_ERROR)..
What you guys feel are these two things related anyhow ?..Anyway i am expecting solutions for both .
Points will be awarded
Hi Krishna/Ahmad/Rajesh ,
Krishna, i am already through with that blog :
A RFC destination is already created of HTTP type by the name of XI_INTEGRATIONSERVER....i don't think that difference in the name of RFC destination will be the cause of error ?
The RFC destination of HTTP type which i have created at Business System on checking shows me this message " Empty HTTP Request Received "...and this..
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
Ahmad ,
SLDCHECK is working fine and SLDAPICUST has the required details of PIAPPLUSER..but interesting thing is that our PIAPPLUSER is getting blocked very frequently.....can you help me to figure out why PIAPPLUSER is getting blocked that frequently ...but for this case i first unlocked PIAPPLUSER and then ran the scenario.
Rajesh ,
SLDCHECK is working fine...
XI guru's Waiting for quick solution .
Similar Messages
-
How to fix an error (related to work schedule rule) in Time evaluation ?
Hi experts,
I am getting an error while running time evaluation - PT60.
Find the log
Log:TimeEvaluation General data
Schema ZM04 Time Evaluation Without Clock Times
00753402 Christoudas Natalie
Customizing error in work schedule rule 1 VM 01 5MTWTF Person rejected: 00753402
How to fix it? Its urgent.
Be assured of points for useful answers.
RajeshHi All,
I have checked work schedules and work sc. rules. everything looks fine. Reason being fine, same work schrdule rule, i.e. 5MTWTF is used for other employees, whose payroll area, personnel area, personnel subarea, employee group and employee subgroups are same.
Why it is throwing error for one employee 753402.
I am providing you more information. In table V_T569r, if u select recalculation category as time evaluation, it is mentioned as 01.01.2003. Initially, one action called "Conversion take on" has been maintained as on 01.03.2002, where employee had payroll area -99 (payroll irrelevant) and personnel subarea - DAYY.
Then on 17.03.2008, another action ran "Conversion initial reassignment" where payroll area changed to "MT - monthly", subarea changed to DAYF. At that time PDC recalculation date in infotype 0003 was 01.03.2002 which was before recalculation date, i.e. 01.01.2003.
Time evaluation was throwing 2 error messages. one was solved by changing PDC recaluation date to 17.03.2008. But other error related to work sc rule 1 VM 01 5MTWTF still occurs.
Can some body now provide some useful information?
Thanks
Rajesh -
Error related to namespace mismatch in BPEL
Hi All
We are facing an error related to NameSpace of a variable in BPEL process.
We are sending a SOAP XML request to a third-party web service and fetching the XML response in a variable. There is a mismatch in the namespace of the variables. The xml response is having ‘ns1:’ while the variable created in BPEL process is having ‘ns23:’. Thus the process is giving the following error when initiated:
<part name="code" >
<code>Server.userException</code>
</part>
<part name="summary" >
<summary>when invoking endpointAddress 'https://cservice1.hrapply.com/WS/erp/ERPService', org.xml.sax.SAXParseException: The prefix "ns1" for element "ns1:newHireResponse" is not bound.</summary>
</part>
Complete error message is attached. We tried to rename the variable by changing the namespace in <process>.bpel file but that did not solve the issue. We have also tried to create a new process where the namespace given to the new output variable is ns1: But still he error persists.
Any pointer/suggestion to solve this issue is highly appreciated.
PS: We are using BPEL: 10.1.2.0.2java.lang.ClassNotFoundException: org.springframework.web.servlet.DispatcherServletYou don't know how to solve class not found errors? That's incredibly basic Java classpath stuff that you not only should know, you MUST know how to handle before you can even think about touching a web environment. You are lacking some really basic core Java knowledge here. Are you perhaps trying to learn Java by diving right into a web application? If so - you can give up now, you have to start from the beginning and that is learn Java. Not only the language, the platform and the tools too.
-
I am getting errors related to a plant not in that plant range .
I have created a costing run for company code 6000 and defined a plant number range in the Selection Parameters However, I am getting errors related to a plant not in that plant range . Can you explain this?
What does the error say?
If you get this when you try to mark or release the Cost Estimate, you should be able to ignore the error. The system complaints that Marking has not been allowed for some plants etc. Nothing of significance.
Else, check the transfer control. Either way, maybe we can answer better if we know what the error is.
Cheers. -
Reg an error related to default organization dn
Hi,
We created a Test DC in our environment., dc=test,dc=alpha,dc=com , but the actual default organization dn was dc=alpha,dc=com.
And recently we deleted the Test DC, dc=test,dc=alpha,dc=com, from which we started getting errors related to provisioning profile,
When i tried checking the synchronization status , it is throwing error , cause it is taking the wrong organization dn value,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
at oracle.ldap.util.Subscriber.resolve(Subscriber.java:591)
at ora cle.ldap.util.Subscriber.<init>(Subscriber.java:372)
at oracle.ldap.util.Subscriber.<init>(Subscriber.java:321)
at oracle.ldap.util.RootOracleContext.getSubscriber(RootOracleContext.java:378)
at oracle.ldap.util.provisioning.ProvisioningCmdArgs.computeDefaultValues(ProvisioningCmdArgs.java:243)
at oracle.ldap.util.provisioning.ProvisioningProfile.ProfileHandler(ProvisioningProfile.java:632)
at oracle.ldap.util.provisioning.ProvisioningProfile.main(ProvisioningProfile.java:1019)
Unable to resolve Organization : oracle.ldap.util.UtilException: NamingException encountered when resolving subscriber - DEFAULT = dc=test,dc=alpha,dc=com
But if i explicitly specify the organization dn, then it works correctly,
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> application_dn="orclApplicationCommonName=sid6854,cn=EBusiness,cn=Products,cn=OracleContext,dc=alpha,dc=com" \
> organization_dn="dc=alpha,dc=com" \
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -4
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164253
orclODIPProfileLastSuccessfulProcessingTime: 20140115164253
Outbound profile status details:
orclLastAppliedChangeNumber: 4799005
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140115164304
orclODIPProfileLastSuccessfulProcessingTime: 20140115164304
So it seems the DEFAULT organization dn value is still stored in some locaiton from where oidprovtool using the wrong value ?
Could you please let me know how to point out to the correct organization dn ?
Regards,
KarthigaThanks J,,, Your suggestion helped to find another way.
its resolved now..
1. Searched for the entry:
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=test,dc=alpha,dc=com
2. Created test.ldif file with the below entry:
dn: cn=common,cn=products,cn=oraclecontext
changetype: modify
replace: orcldefaultsubscriber
orcldefaultsubscriber: dc=alpha,dc=com
Executed modify command:
ldapmodify -h oidtest.bpweb.bp.com -p 3060 -D "cn=orcladmin" -w XXXXXXXXXXXXX -f test.ldif
3. Again searched for the value and it shows the right one now.
ldapsearch -h oidtest.bpweb.bp.com -p 3060 -b "cn=common,cn=products,cn=oraclecontext" -s base "cn=*" orcldefaultsubscriber
version: 1
dn: cn=Common,cn=Products,cn=OracleContext
orcldefaultsubscriber: dc=alpha,dc=com
4. And checked provisioning and it is working fine now
oidprovtool operation=STATUS \
> ldap_host=oidtest.bpweb.bp.com ldap_port=3060 \
> ldap_user="cn=orcladmin" \
> application_dn="orclApplicationCommonName=sid6853,cn=EBusiness,cn=Products,cn=OracleContext,dc=bp,dc=com"
Please enter the LDAP password:
Please enter the Interface connection information (Press Enter key for empty value):
Inbound profile status details:
orclODIPProfileLastAppliedAppEventID: -2
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120049
orclODIPProfileLastSuccessfulProcessingTime: 20140116120049
Outbound profile status details:
orclLastAppliedChangeNumber: 4808806
orclSubscriberDisable: 0
orclODIPProfileProcessingStatus: Event Propagation Successful
orclODIPProfileLastProcessingTime: 20140116120046
orclODIPProfileLastSuccessfulProcessingTime: 20140116120046
Regards,
Karthiga -
Several errors related to recovery of A305-s6837
Hey everyone, had to use the recovery disks for my mom's laptop and am encountering several errors post-recovery.
1. The first error? is that everytime Windows is loaded I get a box labeled System Preparation 3.14 toolbox, it hangs around for a few seconds and then disappears.
2. When windows loads, I get a auto-installer trying to load "Toshiba Desktop links". It does this everytime I load the software.
3. next, it will pop-up a box checking for network connection and warning box that requires wireless and lan lines to be disconnected. If you try to cancal the error, it will keep popping up until you turn it off and then back on.
When windows reloads, notepad opens up and I get what looks to be an error relating to "CheckFM" and/or "InstallFM".
4. Get an error message that Windows cannot find C:\b27238e.exe
5. Had to turn the user account's off because the administer account had a password that was different than the one I had on it pre-crash.
What had happened was that the computer was freezing up within 3-4 minutes of loading. It didn't matter what program you loaded, it would freeze. Anyway, any suggestions would be very helpful. Thanks...i cannot update to service pack 2. In short, nothing from microsoft is installing.
it is asking me to authenticate microsoft windows installer
i have a Windows requries a digitally signed driver
Those symptoms are consistent with restoring to a drive with advanced-format technology. See my post here.
Is this a replacement drive? If so, what is the make and specific model?
this is not a hardware issue.
If this is the trouble, I would certainly call it a hardware issue.
-Jerry -
Error related to FullTextSearch database
Guys, I just created a new Portal domain using the Configuration Wizard tool. When starting up the server, I see a flurry of errors relating to the Content FullTextSearch db not being created (see below).
Any quick suggestions on how to fix this?
==
<May 24, 2006 4:45:12 PM CDT> <Error> <Search> <BEA-415611> <Unable to create th
e Content FullTextSearch database associated with repository BEA Repository due
FullTextSearch engine error.
com.bea.content.repo.internal.server.logic.search.CommandFailedException
at com.bea.content.repo.internal.server.logic.search.AutonomyHelper46.fi
reServerCommand(AutonomyHelper46.java:356)
at com.bea.content.repo.internal.server.logic.search.AutonomyClient46Man
ager.createDatabase(AutonomyClient46Manager.java:150)
at com.bea.content.repo.internal.server.logic.search.AutonomyClient46Man
ager.connect(AutonomyClient46Manager.java:91)
at com.bea.content.federated.internal.VirtualRepositoryManagerImpl.ensur
eFullTextSearchDatabaseExists(VirtualRepositoryManagerImpl.java:222)
at com.bea.content.manager.internal.ContentUpgradeListener.postStart(Con
tentUpgradeListener.java:77)
Truncated. see log file for complete stacktrace
java.net.ConnectException: Tried all: '1' addresses, but could not connect over
HTTP to server: 'localhost', port: '9001'
at weblogic.net.http.HttpClient.openServer(HttpClient.java:320)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:375)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:149)
at weblogic.net.http.HttpClient.New(HttpClient.java:245)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:16
0)
Truncated. see log file for complete stacktrace
==
Thanks.I figured it out... you just need to start the two Autonomy servers.
-
I am getting configuration error related to licencing of Photosaop CS5. Error:213:5
This error is due to a permission issue.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-error-cod es.html
Please follow the instruction in the following link to resolve it:
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error- cs5.html
Regards,
Ashutosh -
I purchased CS6 and am now just using it. I am trying to use Illustrator and it keeps giving me multiple errors relating to plug ins. It won't let me do anything, literally.
Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
Hi,
I have Lenovo g580 which had DOS preinstalled in it {i5, 500GB, 4GB} and initially I had installed Win 7 32-bit on it. At that time, it gave some problem while rebooting 1st time, but i ran repair windows option and everything ran smoothly.
But the problem came when I tried to install windows 7 64-bit on the laptop using a DVD, no matter which drive I select, it does not allow me to go ahead. When I checked the details, I got the error message which is attached here.
Link to image
There is no disk controller option in BIOS, nor is there anything related tto UEFI systems.
i did r&d on uefi systems, but i want to be sure of everything before i go ahead with anything.
Any help would be appreciated.
Moderator comment: Image(s) >50KB converted to link(s). Community Rules.
Solved!
Go to Solution.Thanks for no help guyz!
but i found a way..so for anybody else out there..here is the solution..
When installing at the partition screen hit Shift+F10.
At the prompt type diskpart and press Enter.
Type list disk (Not the number of the disk you want to use)
Type select disk X where is X is the number of the disk you want to use.
Type clean. This will erase all the data on your system.
Type convert gpt
Now reboot the system with the DVD/USB, and you will see only Unallocated Space. Use that to install the new windows.
Be warned though, this will clear out the partition table on the drive; make sure you have a backup before attempting this if you have important data -
RE:Error related to Mapping and/or Database?
Hi guys,
I am processing a TLOG(transaction) from XI to BW. it is processing successfully(which i have seen in SXMB_MONI).For some TLOG's i am getting error like "Maintain entries in ZPOS_ITEMTXNTYPE for 0002/ZTGS//0000" in the response message id.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPIRET2Table xmlns:ns1="http://bell.ca/fi/metadata/pi/7.0/r3_fi">
- <BAPIRET2Record>
<Type>E</Type>
<Id>ZPIPE</Id>
<Number>016</Number>
<Message>Maintain entries in ZPOS_ITEMTXNTYPE for 0002/ZTGS//0000</Message>
<LogID />
<LogMessageID>000000</LogMessageID>
<MessageVariable1>0002</MessageVariable1>
<MessageVariable2>ZTGS</MessageVariable2>
<MessageVariable3 />
<MessageVariable4>0000</MessageVariable4>
<Parameter />
<Row>0</Row>
<Field />
<System />
</BAPIRET2Record>
</ns1:BAPIRET2Table>
Can someone please tell me weather this error is related to XI Mapping or it is related to data in the table( i mean wrong data entered into the table like......) or it is related to BI or something else.
please provide your valuable suggestions
Thanks in advance,
AmarnathAmarnath,
It seems like the values you are sending to the BAPI are not returning any values. So please check whether there is any response values for the corresponding inputs you are sending. It may be related to mapping also like when you send any number to BAPI say if the length is 10 and you are sending as 123 then it will not return any values because it expects 0000000123. So please check that.
Best thing would be test the bapi in SE37 with one values and when it returns the output use the same values you are testing.
Regards,
---Satish -
BFILE Errors related to Directory
Hi,
For the code below related to BFILE operations, despite of showing the Directory path and the file name, ORA-22285 is thrown. Could some one help out resolving the problem.
Code:
DECLARE
VFile BFILE;
NAME VARCHAR2(2000);
UTL_DIR VARCHAR2(2000);
BEGIN
SELECT XML_FILE
INTO VFile
FROM SPE_TXML;
DBMS_LOB.FILEGETNAME(VFile, UTL_DIR, NAME);
DBMS_OUTPUT.PUT_LINE('UTL_DIR '||UTL_DIR);
DBMS_OUTPUT.PUT_LINE('NAME '||NAME);
DBMS_LOB.FILEOPEN ( VFile , DBMS_LOB.FILE_READONLY);
DBMS_LOB.FILECLOSE ( VFile);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERR '||SQLERRM);
END;
Output:
UTL_DIR F:\FLCCMS\PROD_UTL_DIR
NAME SPE.XML
ERR ORA-22285: non-existent directory or file for FILEOPEN operation
Thanks n Regds,
JaikanthI see that the output displayed UTL_DIR and NAME are all in CAPS. If the OS is Case Sensitive and if the DIRECTORY NAME and FILE NAME does not match, you are quite likely to the get 22285 error. Please check your Directory name and File name again.
Regards,
Murali Mohan -
Failed to add app with security error related with c2wts
Right now, we are facing some weird issue when adding our app to customer's SharePoint site. When site collection admin clicks our app to add it, he would get a popup page with title "Access Required" and message "Sorry, you
don't have access to this page", however he is already site collection admin.
At the SharePoint logs, we saw the following exceptions:
SPSecurityContext: Could not retrieve a valid windows identity for username 'company\user' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service.
at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity)
at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid)
at SyncInvokeUpnLogon(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
(note, I changed the user name to some generic name there)
after that, we also saw another exception:
No windows identity for company\user
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace:
at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)
at Microsoft.SharePoint.SPAppPrincipalPermissionsManager.UpdateAppOnlyPolicy(SPAppPrincipalInfo appPrincipal, Boolean allowAppOnlyPolicy)
at Microsoft.SharePoint.ApplicationPages.AppAuthorizePageBase.GrantAppAccess()
at Microsoft.SharePoint.ApplicationPages.AppInvPage.BtnAllow_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) .
I did some reading over the SharePoint code and also searched over internet, I found out this link:
Adding App Causes Security Error where the similar error is thrown as well and he fixed the issue by reconfiguring the c2wts services. His issue is slightly different from mine. In his case, end users won't be able to add in the first time
and they would get "You Can't Add This App Here" message while in our case the error is thrown during adding the app.
Why we would need the c2wts services here for adding an app if user is already logged in SharePoint via windows authentication? Could someone confirm that would be the root cause for this failure since I also see the stack related " at Microsoft.SharePoint.SPAppPrincipalPermissionsManager.UpdateAppOnlyPolicy(SPAppPrincipalInfo
appPrincipal, Boolean allowAppOnlyPolicy)", just wonder if AppOnlyPolicy=true which our app requires has anything to do with this as well. Again, I could not find anything related article about that specific configuration is required to allow app with
AppOnlyPolicy.
Another weird thing is that it only happens at sites with managed path. At root site, the app could be added without any problem.
Any suggestions are highly welcome and really appreciated. This is on a big customer. :-) Thanks in advance for your insights.This issue can occur when you change the name of the "Application Name" within Visual Studio, then deploy to BizTalk with the new name. Problems is the DLLs are still assocaited with that earlier deployment name in BizTalk. So go into BizTalk
Admin Console, then navigate to: BizTalk Group - Applications - Then for each application check the "Resources" folder. Under one of these folders you should see your DLLs are already assigned to one of these other BTS apps. So you need to
delete the resources from the app (or delete the other apps) then your new deployment name will work. -
Error relating a company code to a valuation plan
Hello,
I am trying to relate my company code to a valuation plan in OAOB transaction but it appears the error AC551. I have checked it and I don´t know where could I enter the value for VAT indicator for nontaxable transactions.
Could you help me with this issue?
Thanks a lot!Hello
The result of the check of company code shows that important global
parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
You cannot use the company code for Asset Accounting without this information.
Please check input tax code for non-tax relevant postings
(for example depreciations) can no longer be maintained via
IMG -> Fin. Accounting -> Asset Accounting
Maintenance is done via the IMG using the following path:
Financial Accounting -> Financial Accounting Global Settings -> Tax on
Sales/Purchases -> Posting -> Allocate tax codes for non-taxable
transactions or transaction OBCL. Note 47055 is for your reference.
regards
Ray -
Quotation creation through DP81 Error related to Material maintain Inquiry
Dear All,
This is related to Quotation creation through DP81.I have maintain A DIP profile and as per my Easy Cost Planning (ECP) in Project System it is capturing in sales price in DP81.Please note that I have maintain three (3) line item in the sales Inquiry.Based on that 3 line item we have maintain three different WBS element in ECP and it is attached to corresponding material no in VA12.
Now in DP81 system showing the three line item but if we go for Quotation creation one material no is coming for the three line item with different price value.
I have also maintain these three material in DIP profile in ODP1.Please note that the first material no maintained in DIP profile that is coming not the other material no.
Please through some light as in our case there are several line item is maintained in quotation.So is it possible to make Quotation with different item and where I have to maintain these material no.
Thanks
Suman Sardari checked the characteristic for cost element & Material for CR, MD & Str, i created sets for cost element & the material & i determined the material which i required in the quotation. I am getting an error "no expenditure item found" , can you suggest me now.
Maybe you are looking for
-
Error while creating a process order
Dear Guru's While creating a process order ,i am facing an error. "Unable to create batch. Storage location BPSS is invalid for material 112100050 Message no. 40116". How to assign specific storage loaction to that particular material.I have assigned
-
I use dreamweaver to make some eBay adds for work, so I can just copy the code into eBay's web site. This also allows me to input more pictures and links in my advert. Is there a way to set a behaviour so a picture will open up in a new smaller pop u
-
I've recently created a music video on imovie '09. The problem is, I can't share or export the movie. Every time I try to, it says "Unable to prepare project for publishing.The project could not be prepared for publishing because an error occurred. (
-
Steps to setup descriptive flexfield or/and key flexfield.
Where can i find white paper or document other than the user guide in metalink or any other source which talks about steps to setup a descriptive flexfield or/and key flexfield.
-
Hey, need some help please.... I've searched long and hard but can't find anything. I've got an application that opens a JDialog, then jDialog has a JPanel within it. Once the JDialog has loaded on the screen i want to update the Jpanel based on a bu