Error: Remove and Check cartridge on right
I have removed the right cartiridge and check it, but the error message will not go away?
I have not tried putting in a differnet cartridge yet.
Suggestions????
It is the black and white cartridge.
This question was solved.
View Solution.
Start by following the troubleshooting steps shown here. If cleaning the cartridge and printer contacts does not resolve the issue then check the spring as shown in this page. If the spring is dislodged (1) you will need to have the printer serviced. If the spring is dislodged but has not damaged the flex circuitry (2) then some have reported success epoxying the spring back in position.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
Printer Error: Remove and check cartridge on right.
Printer Error: Remove and check cartridge on right. I have a HP printer Officejet 7310 All- in-One. I have tried taking the cartridges out, shutting off the printer and unplugging the printer but nothing helps. The cartridges are correct ones; the problem started after I was using these cartridges for a while.
Please Help, MitziCheck out this post in this forum and see if this helps.
-
Remove and check cartridge on right error message on 7410 all in one
I recently changed the black ink cartridge in my 7410 all in one printer. After changing cartridge it gave me an error message of " Remove and check cartridge on right". I have tried removing and reinstalling , cleaning connection points with clean damp cloth (water) and still cannot get error message to go away.
Any ideas would be greatly appreciated. Thank You.NoProblemAtoll wrote:
I know this is an older thread but being it is a top Google result associated with the "Remove and check cartridge on right" error it justifies adding a helpful suggestion for other. Our findings have been HP Printers are very biased against refilled \ recycled cartridges. I own a total of (5)x HP 7310 and HP 7410 printers in my IT Consulting office. These are feature rich MFP’s with an abundant supply of ink available at generously economical prices. On the face of it, it sounds like a good reason to keep a bevy of last gen printers around. EXCEPT the printers work great with the $30-$50 brand new HP brand 96 cartridges from Office Depot or Staples. Unfortunately if you try and buy some recycled cartridges off ebay the Printers detect the recycled\refilled cartridges as a previously depleted HP cartridge that may not be genuine and the units suddenly turn on you. Miraculously the "Remove and check cartridge on right" only manifests itself with non-HP brand cartridges or cartridges that have been refilled. (We have even tried to re-fill out own refreshly depleted cartridges with like results.) Think of it as an HP service reminder conveying you forgot to pay HP their $30-$50 profit on your ink this go round. Remember you need HP Branded ink cartridges (HP = Homogeneously Proprietary). It’s like an intention flaw written into the firmware. Best guess (purely on conjecture) is there is a check in the firmware/drivers for if the cartridges has been previously installed, previously depleted, max install count, and expiration date validation. If it encounters a condition it doesn’t like you get this nondescript error.
[advertisement snipped]
The above post is filled with conjecture and speculation, but is not based on fact. The Officejet7410 is not programmed to reject refilled/reman cartridges. It will check cartridges electrically for various things and will reject cartridges that fail. Typical failures would include a cracked printhead (caused by rough treatment - dropping the cartridge even a few inches for example), or open electrical connections caused by debris on the cartridge contacts. Cleaning the cartridge contacts as shown in the document here may resolve the issue in case of poor electrical contacts.
A cartridge that has been previously used in a different printer will likely be marked as empty, but the printer will happily print with a cartridge detected as empty.
The reality is that the quality of refill and reman cartridges are very variable, but generally poor. The study here has a study conducted by a testing facility, here is another study.
My personal experience has been similar. I donated an HP all-in-one to my son's high school years ago. Sometime later I got a call from the teacher complaining that it was not printing properly. I went and took a look and found they had put in a renam color cartridge that was not printing one of the colors*. They tried another cartridge, which also had a problem and then finally the third cartridge worked. I asked why they used renam cartridges and he said they bought these because they were cheaper. I asked if they were 1/3 the cost....
*The color missing had nothing to do with the printer - blotting the bad cartridge on a damp tissue gave only two of the three colors that would normally be present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Error message: "remove and check cartridge on right." photosmart 2610
I installed two brand new HP cartridges (color and black) in my Photosmart 2610 all-in-one about 1 month ago and they were working fine but now I get an error message asking me to "remove and check cartridge on right." When I check the cartridge (black), it looks fine but the error message won't go away and the printer won't print. Suggestions?
I had the same problem, I have tried resetting with #6 or #3, cleaning.
What worked for me:
1 - While printer is on, go to the "Mfg Commands"
(on my printer I had to press "*" and "#", others would need to press both left and right arrows, etc.)
2 - You will get the following message "Enter special key combo", then enter "123".
3 - Press the right arrow until you find "Special Reports", click OK
4 - Press the right arrow until you find "Print Cartridges", click OK
What was my surprise when at number 3, it started printing !
And then, everything came back to normal !
Super cool !
Hope this works for you ! -
My HP2575 give's "Ink Cartridge Problem - Remove and check cartridge on right"-error
Hello,
I have a HP photosmart 2575 all-in-one. For just a couple of month's I use my black 339 cartridge and suddenly it give the error "Ink Cartridge Problem - Remove and check cartridge on right", with means the black cartridge. I always use original HP cartridges and have never filled them by myself or other people. Because the expire date is just a couple of weeks late, HP won't support me. For now I put a new cartridge in the printer, with works fine. How can I solve this problem with my cartridge? It has enough ink for many prints to make, so I don't like to throw that away. I hope you can help me with tis matter.
Thanks a lot.Hello Tom_Heitbrink. I have located a document you can follow to troubleshoot your issue. Let me know your troubleshooting results after following the document. I'm only here to help!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00427221&cc=us&dlc=en&lc=en&product=441240
Mario
I worked on behalf of HP. -
Re: Remove and check cartridge on right.
I own an Officejet 7310 All in One. I have received an error that reads "Remove and check cartridge on right". After removing and inspecting the nearly full black cartridge, I could not identify any abnormalities. After reinsertion, the error returns. Perhaps I don't understand what is meant by "check". Please help.
Ralph SellersThe document here may help resolve the "remove and check" error. The photo in the post here may be helpful in checking for damage to the x-bias-spring.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Photosmart 2710: Error Message and check cartridge on right.
I have the Photosmart 2710 all-in-one but I continue to get the following error message: Remove and check cartridge on right.
I have remove the black cartridge and check everything. I have cleaned the connectors but still I continue to get this error.Start by following the troubleshooting steps shown here. If cleaning the cartridge and printer contacts does not resolve the issue then check the spring as shown in this page. If the spring is dislodged (1) you will need to have the printer serviced. If the spring is dislodged but has not damaged the flex circuitry (2) then some have reported success epoxying the spring back in position.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
My photosmart 2610 has an error message "Remove and check cartridge on right"
I have replaced both the black and color cartridge and still have the error message. Also have restarted computer and turned printer off and on several times. Need help!
Hi ruf,
Check this article and see if this can fix your printer - Remove and Check Cartridge
Hope this works for you!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well. -
Remove and check cartridge on right
I own HP Officejet 7310 all-in-one. Yesterday the above message appreared when I turned on the printer and tried to print . I took out the cartridge and then reinstalled it. The message did not go away. i turned the printer off and on again; message remained. I then put in a new cartridge. Same message. I have no idea what to do.
waynewal wrote:
Having same problem. Finding that in other web sites HP has programmed the system to remember only 2 ink cartridges. apparently the only way to solve this after cleaning does not work is to disassemble and remove the battery, wait a while, then replace battery and reassemble the printer.
There is a lot of misinformation in "other web sites". Neither the Officejet 7410 or the Photosmart 2610 series printers have a battery in the printer. The memory stores information about the most recent cartridges, but this information is only used to determine ink levels and the need for alignment, it has nothing to do with the "remove and check" message.
Try cleaning the cartridge contacts as shown here
(for a different cartridge, but similar). If that does not help check
the spring and make sure it has not become dislodged and damaged the
flex as shown here. If the flex is damaged your printer will require service.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Hp c4189 all in one - Problem message says "Remove and check cartridge on right"
This message keeps returning after several cartridge removals and even new cartridge installed.
What do I do next? Thanks.This message keeps returning after several cartridge removals and even new cartridge installed.
What do I do next? Thanks. -
I got a printer (as above) in a yard sale. When I first turned it on, it had an error message: "Remove and check cartridge". I pulled out and looked at the cartridge, nothing seemed wrong (except perhaps the mildly inexplicable twist tie). Then I tried cleaning the contacts, did a hard restart, and looked for damage to the flex (there was none I could see), as suggested here: http://h30434.www3.hp.com/t5/Other-printing-questions/Need-help/m-p/71/highlight/true#M8
Still no love.
What does it want me to do?Hi,
Try this link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00054462&cc=us&lc=en&dlc=en -
Hp2175xi printer Remove and check cartridge. error message displayed on printer.
Remove and check cartridge error message displayed on printer. I have removed and inspected cartridges and no problems were evident. Shut down printer and restarted, unplugged and restarted same error displayed. Please help with any suggestions or solutions.
Thanks JohnHi
If the cartridge isn't empty and you've tried the usual troubleshooting (which includes cleaning the contacts on the cartridge and in the printer) then it's probably best to contact Phone Support for a possible replacement.
You can check if the cartridge is still within warranty by checking the warranty ends date here
Best Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
"Remove and check cartridge" error message
My Dell Latitude died. It was hooked up to my hp psc 2110 all in one printer.
After completing the set-up basics on new laptop, I downloaded the drivers for the printer successfully. A test was successful.
Next day, I tried to print. The printer told my laptop that the ink was low. Installed new cartridge; hit enter to align. It went all the way through alignment, but would not print. Instead it posted the scrolling message “Remove and check cartridge”.
I removed and reinserted the cartridge and nothing changed. Same message.
Expensively (I really needed to print), I inserted a new cartridge. The printer started to align the cartridge. At the second bar it froze. I watched the two unchanging bars for twenty minutes.
Since then (in this order) I have:
Turned off the printer for ten minutes and turned it back on. It started scrolling (?) “Remove and check
cartridge”
Uninstalled then downloaded the drivers and tried all again.
Left everything off for forty-eight hours.
The troubleshooter from the computer couldn’t identify the problem, but said the toner was fine.
I could not print a self-test report because no matter what button I push nothing changes.
Opening and closing the top section (in order to replace cartridge) makes the cartridge move, but does
nothing to the message.
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=1
10&prodSeriesId=295848&prodTypeId=18972&supportTaskId=42089 does not have this error
message
Looked at and tried all suggestions on HP forums.
The three little green lights (best, normal, fast) flash together.
It still only scrolls “Remove and check cartridge”.
I have not hit it. I am out of ideas. I cannot afford a new printer.
PLEASE HELP. (Please keep it clear and simple.)
hp psc 2110 all-in-one printer · printer · scanner · copier MY342F5744 C8644A Made in Malaysia
(inside: MY342F5744 C8644-60002)
Windows 7
Toshiba Satellite L770
Thank you.I, too, gave up, and purchased a new cartrige. At least for me it did the trick.
-
HP 7410 - remove and check cartrige on right
I have full genue HP black Print Cartrige # 96 2011/11/02 Y 17212513387306575
after alittle bit of time, it stopped working while on the screen of my printer it says: "remove and check cartrige on right",
i insertted my previous empty black cartrige, and the error massege was gone,
what can I do?
Thanks ahead,The troubleshooting steps here may help. If cleaning the cartridge and printer contacts does not resolve the issue and the carriage flex circuit is not damaged then Contact HP for warranty replacement of the cartridge. (Your cartridge is still under warranty based on the date you showed.)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
What the bleep does "Remove and check cartridge" mean? (officejet 6110xi all-in-one)
I got a printer (as above) in a yard sale. When I first turned it on, it had an error message: "Remove and check cartridge". I pulled out and looked at the cartridge, nothing seemed wrong (except perhaps the mildly inexplicable twist tie). What does it want me to do?
Hi,
Try this link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00054462&cc=us&lc=en&dlc=en
Maybe you are looking for
-
I can not install Oracle 8i 1.6 Client for NT on an Intel pentium 4 Machine
Hi all, I've heard the java virtual m installed during the installation of oracle client manager 8i 1.6 on a Intel Pentium IV is bugy till now we could n't bring it to runn. Is there anyone who has the uptodate Patch or work around for that problem?
-
I turned my ipad off. It's now asking for a passcode. Is that the same as the password for my Apple ID. I used it but it still will not let me get access,
-
Problem with JBDC connection to mysql in tomcat
hi , can anyone plz help me?.. iam new to JSP. iam trying to impelement a application in JSP with JDBC connection using tomcat. Database is MYSQL . iam getting the following error: org.apache.jasper.JasperException: Unable to get connection, DataSour
-
IN clause with more than 1 column, possible?
Hi, I have an existing (simplied) query: SELECT sum(bandwidth) FROM a, b WHERE a.tag = b.tag AND a.id IN (SELECT id FROM ...); If the subquery returns an id, say, twice, I would like the bandwidth to be added twice. E.g. Suppose the query returns (12
-
hello !! i ask how can i get the current tab page ID !!!