Error "REP-0788: Warning" on registering custom report to e-Business Suite

Hi
I done the register of custom report to Oracle e-Business Suite 11i got the below error
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 4579
REP-3000: Internal error starting Oracle Toolkit.
REP-0788: Warning: The value of restricted LOV parameter P_1 is not among the selectable values.
Report Builder: Release 6.0.8.24.0 - Production on Tue Apr 14 10:25:34 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 715975.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
please anyone help on this.
regards,
sva

Hi,
What is the type of the report? Is it bitmap? If yes, please make sure that the DISPLAY is set properly. Also, change the report type to text and see if you can submit the request successfully.
Here are some additional troubleshooting documents to look at:
Note: 200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200474.1
Note: 364838.1 - Quick Checks for REP-3000: Internal Error Starting Oracle Toolkit.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364838.1
Regards,
Hussein

Similar Messages

How to register custom report under Custom Development Application

Hi 2 all
How to register custom report under the Custom Development application in R12 vision DB, and also confirm location/folder of Custom Development application in R12.
Thanks
Zulqarnain

Hi,
You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Registering custom report problem

hi friends
im using oracle 11i, and want to register a custom report. ive created an executable from System Administrator > concurrent > Program > Executable and saved successfully. but im facing a problem while im trying to Define the concurrent program. i cant find the Executable name in the list which i have just created in Executable form. it says "FRM-40212: Invalid value for field EXECUTALBE_NAME".
did i miss anything? why am i getting this? pls help me.
Thanks,
Lisan

Lisan,
i cant find the Executable name in the list which i have just created in Executable form. it says "FRM-40212: Invalid value for field EXECUTALBE_NAME".Did you query using the executable "Short Name" not the "Executable"?
Regards,
Hussein

Purchase Register Custom Report -

Hi Expert,
Hope you all are fine!
I am new to CIN.
I have to develop a custom report for LIV details which will contain the follwing column:
could you please help me to know from where i can take these field i.e reference table and links.
Tax Invoice (ref no.)
Invoice Date
Vendor Code
Vendor Name
Vendor complete Address
State
Line item Description in invoice
Vendor TIN
Vendor CST
Value of Goods
Freight & octroi
Packing & Forwarding
Excise Duty
Education cess
Sec.Education
CST value
VAT Value
Tax Code
Tax Code Description.

As per ur reference: -
In PO, Condition are like--- PO Qty is 10
Basic Amount..........1000
taxes.........................100
Freight.........................50
Other...........................20
and we have receive only 5 qty out of them, means all the condition amount will be 50%. like...
Basic Amount..........500
taxes.........................50
Freight.......................25
Other.........................10
all condition will be calculate according to qty 5 not for 10 as showing in PO..
I want to pick these condition. (according to 5 qty.)..
Now suggest...

Is 10g Forms and Reports with E-Business Suite 11.5.10.2?

Hi Experts,
I want to know,
10g forms and reports is certified with Apps 11.5.10.2?
Thanks
R.Sundaravel

Hi,
Anchorage.India wrote:
Hi Sundaravel,
10g forms and reports is certified with Apps 11.5.10.2?Yes it is.
You can refer the following ML doc,
[Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1]
Thanks,
Anchorage :)It is not.
Regards,
Hussein

Custom Identity Service - E-Business Suite

Hi
Just wondering if anyone has looked into creating a custom BPEL Identity Service Plug-in for E-Business Suite?
I'm not sure if we need to do this yet for a client, but if anyone had tried it would be great to here about any issues you came across or whether you got it to work....
Any help greatly appreciated.
Chris

The easiest integration with DB repository is to use Oracle Virtual Directory ( OVD) database adapter.
You can write custom Plug-ins code using IdentityService APIs for 10.1.2 and 10.1.3 releases.
But we deprecated the approach and recommend to use OVD for customization for 11 release.
I have tested OVD with BPEL IdentityService LDAP provider. It works well even for 10.1. release.
That approach simplifies the mapping between LDAP inetOrgPerson and groupOfUnuiqueNames objectClasses and DB schema.
I can help you with OVD configuration.

How do we embed Crystal Reports in the Business suite?

Hi all,
Actually the question is:
With the new embedded Analytics, is it supposed to allow us to embedded other CRs into teh ERP System or is it not supposed to be part of the integration (and then we need to use the opendocument feature)?
I can see that we have business content created with CR and XC in the business suite now, but not sure if we have developed a mechanism to call other Reports from the BI platform (BOE).
Thanks all in advance,
Antonio
Edited by: Antonio Alvarez on Jan 23, 2011 5:20 PM

Hi Ingo,
Thanks for the quick reply, I knew about the Opendocument functionality, is there anything else that integrates CRs into the ERP systems natively and that is related to the embedded analytics?
Thanks in advance,
antonio

Host a custom form on E-Business Suite Forms Servlet

Hi.
Is it possible to host my own form using the Forms engine integrated with E-Business Suite?. is this a good idea? or do i have to setup another forms servlet?
I'm trying it with one form with a menu. I just Copied the mmx files and fmx files where all the fmx files of EBS suite reside. or do i need to recompile it inside linux forms compiler (adadmin) using .pll plx, fmb files?
I manually type the url "domainname.com:8000/dev60cgi/f60cgi?formname.mmx?user=username?password=password"
where user, password = database user (not apps user)
when i did this, it still launched the applet but still goes to the main form of EBS? and the custom form doesn't get called..
regards,
anton

I think you can do it.
Should look in appsweb.cfg configuration file. usaually in $COMMON_TOP/html/bin
; 1) Runform Arguments
; The module argument defines the first form to be started.
; It is composed from parameters %prodTop%/forms/%lang%/%formName%
; The default looks like $APPL_TOP/fnd/<version>/forms/US/FNDSCSGN
; Following parameters and prodTop are used for composing module.
; Note: Personal Home Page modifies the lang setting automatically.
formName=FNDSCSGN
lang=US
Forms servlet is just a mechanism to start the f60webmx processes on the application server (which also has the Forms listener servlet). So you will not need a seperate servlet in your case.
HTH
Bansi

How to link discoverer report to E-Business Suite

Good day
I followed instructions as stipulated in document number doc 278095.1 and doc 433397.1.
However i dont understand the link between the two.Actual im still new in oracle.
If i understand correctly doc 433397.1 is used to register the discoverer workbook to OracleOasis.RunDiscoverer
package and i created the function using this parameter
'workbook=XX_LEAVE_LIABILITY&PARAMFORM=HTML' ....I do not know if is necessary to put the inverted commas.
and assign it to a certain menu .
I have created another function following 278095.1 instructions but i do not know how does the two functions link.
Because for doc 433397.1. the Properties tab TYPE is 'SSWA plsql function opens in new window (Kiosk Mode)
whereas for doc 278095.1 is ''SSWA plsql function'
and the form parameter for doc 278095.1 is ''workbook=XX_LEAVE_LIABILITY&PARAMETERS=sheet~1*' .
The function name is there assigned to a responsibility but i can not access the discoverer report it retuns message "Unable to authenticate session'

Hi,
The ICX parameters can be updated by going to the System Profile form on the System Administor menu.
Basically, the way the OracleOasis.RunDiscoverer function works is that it checks the ICX profiles from the user and builds a URL to start up Discoverer. It then adds to the end of the URL the workbook details from the form function so that the URL opens the workbook and supplies the parameters to the workbook.
So if the ICX: Discoverer Use Viewer profile is set to Yes then the function takes the URL in ICX: Discoverer Viewer Launcher. Hence you need to check that this URL (which should look like http://<HTTP Server>:<Port>/discoverer/viewer) actually launches Discoverer. The ?Connect=[APPS_SECURE] needs to be added to this URL so that Discoverer is launched without the need to reenter username/password.
It then concatenates the values in the ICX: Discoverer End User Layer and ICX: Discoverer End User Layer Language Override e.g. EUL_US to create the Discoverer EUL owner. The EUL parameter is then added to the URL so that Discoverer is started using this EUL.
Finally, the value in the parameter field in the form function is used to add the worksheet selection and if necessary worksheet parameter selection parameters onto the URL.
Rod West

Discoverer reports in E-Business Suite R12

Hi
We have just upgraded to R12.Now all the reports with worksheet parameter can not open up on discoverer viewer .Can anyoone assists

Yes i mean "linking to the discoverer viewer from the R12 menus and the form function contains a worksheet "
.Here is a eorksheet parameter
"mode=DISCO&workbook=POSA__PENSION_REPORT&PARAMETERS=sheetid~1354*".
And sorry for not being clear enough, i do not get error but instead of opening worksheet content , first it lauch the worksheet list then i have to select the worksheet to view content.
Edited by: user649824 on 2010/03/11 11:10 PM

Steps for Developing Custom Forms in E-Business Suite

Hi have made many sample forms
and now i want to deploy that custom forms in ebs
how can I do it?

Hi again;
You can also see:
Registering Forms in Oracle Apps 11i
Forms Customization Steps in Oracle Applications
http://apps2fusion.com/apps/21-technical/44-forms-customization-steps-in-oracle-applications
Regard
Helios

How to register custom forms & reports

Hi,
Please anyone help me the steps required to register custom forms & reports to e-business suite 11i.
regards
sva

Hi,
Please refer to the following document.
Note: 216589.1 - Step By Step Guide to Creating a Custom Application in Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216589.1
Note: 177610.1 - Oracle Forms in Applications FAQ
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=177610.1
Note: 104697.1 - Setup & Usage (Customization)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=104697.1
Oracle Applications Developer's Guide
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115devg.pdf
Regards,
Hussein

REP-546: Warning: The value of restricted LOV parameter

Hi,
When i try to invoke my report from IE with paramform=no and i am not passing the parameter LEXXX_ENTXXXX in the URL, i am getting the below error,
REP-546: Warning: The value of restricted LOV parameter LEXXX_ENTXXXX is not among the selectable values.
but the same report is working fine if i invoke with paramform=yes.
The Parameter LOV query for the parameter LEXXX_ENTXXXX is ,
SELECT LGL.CY_LEXXX_ENTXXXX, COM.SHORT_NAME FROM LEXX_ENTXXX LGL, COMXXXX COM
WHERE LGL.CY_LEXXX_ENTXXXX = COM.COMXXXX_KEY
UNION SELECT 0, 'ALL' FROM DUAL ORDER BY 2 ASC
Note: Restrict List to Predetermind Values and Hide First Column check boxes are selected
Data Type of LEXXX_ENTXXXX is Number and size is 6.
Please, help me in resolving the above error.
Thanks in advance
Thanks & Rgds,
M T

The value that you give to parameter LEXXX_ENTXXXX when you are submitting your report on the web is not amoung the values returned by the Parameter List of Values Query , and when the Parameter List of Values Query was created "Restrict List to Predetermined Values" check box was checked.
In order to solve the proble you can :
- provide a value to LEXXX_ENTXXXX that is amoung the values returned by
Parameter List of Values Query
or
- uncheck the Restrict List to Predetermined Values" check box of the parameter.
Regards
Ionut S

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

Report won't print to the end of width in Oracle E-Business Suite

Hello all,
I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end of page width. It always cut the print in about 3/4 of page width. I already setup the report as a text and pdf but still no success. Enlarge the width and height of the report won't help either. Anyone can suggest something to help? Thanks.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Error "REP-0788: Warning" on registering custom report to e-Business Suite

Similar Messages

Maybe you are looking for