Error Rep-1814??? Urgent!
Hi Everybody,
I am facing a strange error.
REP-1814: Report cannot be formatted. Object '<object name>' can never fit within '<location>'.
A report is run using different databases it work fines in all cases but in one case it prints more than first 200 pages & then gives the above error and the error keeps on moving to other fields when one field is edited
Plz help
The first thing you should do is make sure that you're on the latest patch set.
If this doesn't resolve the problem then there's a note on Metalink that may help. Search for rep-1814 and you should find it - unfortunately tracking this down is likely to be a long process, especially if it's only reproducing after 200 pages. You may want to look at the data that's being returned at this point and see if that offers any clues.
Regards,
Danny
Similar Messages
-
Generating delimited file from a report in reports 6i gives error rep-1814
Hi all,
We are using reports 6i.
We have a report from which we are trying to generate a delimited file.
We are encounterign the error REP-1814 The object vertically can never fit.
After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
Also we observe dthat this is done using th following command
set_report_object_property('exp039r', null,
' DELIMITER=tab' ||
'DELIMITED_HDR=no');
We tried doing that but, it is not working. Is there anything we should do to get it work.
Thanks and Regards,
HimaSee in Forms Forum
generating delimited file from a report in reports 6i gives error rep-1814 -
Information truncated after résolving the REP-1814 error
Hi,
At first time I had this message REP-1814 Object vertically can never fit within F_Remarque that i could résolve by making all the field in this group Expand vertically as well as the Group itself and no page protection at any frame.
But the problem i have now tha this item should appear in two pages, but it's truncated to appear only in the first page.
The Higher frame was set in properties to print on First Page, and when i put it to All Pages
in order to have all the information displayed, the error REP-1814 Object vertically can never fit within F_Remarque appears again.
I will really appreciate your suggestions.
ThanksI finally found the solution, i just had to put th property 'Print object on ' to 'First page' for the item f_remarque and all the frames of higher hierachy.
Thank for all.
Edited by: manzana on Apr 4, 2011 2:10 PM -
REP-1814 when running delimited over web
Hi,
I have a report that runs fine over the web when:
Destination Format is HTML
Destination Format is PDF
Destination Format is delimited with headers turned on.
As soon as I use the flag delimited_hdr=no (which of course is what I want), I get error:
REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'F_Q1_TARIFF_AREA'.
Any thoughts as to why I only get this error when trying to run the report with delimited_hdr=no and suggestions to a resolution.
Thanks.
Darren.
nullI didn't precise that reports failed to be executed with desformat=delimited but succeded with desformat=pdf.
Why Reports server on linux is unable to generate a full text report but can generate a pdf report ? -
Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita. -
I know that this had to do with allowing room but I cannot seem to find where the problem is.
REP-1814 Object vertically can never fit within R_G_FULL_CPT
I've made all the field in this group Expand vertically as well as the Group itself and I still get the error. Where else can I look? Every singled field and group is either set to Expand or Variable. Thanks for your help or ideas.Nevermind. I figured it out. I just started removing elements from the report until it ran. I narrowed it down.
Turns out that the group R_G_FULL_CPT was set in properties to print on All Pages. When I changed it to First Page, it worked. I'm not completely sure why, but it works. -
REP-1814: Report cannot be formatted. Object 'vertically' can never fit
Hi,
Iam using report server 9.0.2. I have a typical problem. I have developed the report which works fine on the windows environment. But when same report is executed on AIX machine it is giving the problem
REP-1814: Report cannot be formatted. Object 'vertically' can never fit
within 'F_17'.
What could be the problem? Do we need to change the setting or layout as per the environment specific?
can any one help out in solving this problem plz
it very urgent.
thanks
KalyanI had this issue too, and finally discovered the problem. In my situation it had nothing to do with the vertical size of the field. The problem was with the proximity of the offending field to its enclosing frame. Not its vertical proximity, as the error message would have you believe, but its horizontal proximity.
The magic number seems to be 5 spaces (I'm refering to a 'space' as pressing the arrow key when the field is selected) to away from the enclosing frame. I played with it, and when the field was only 4 spaces or closer to the frame, I got the "Object 'vertically' can never fit ... " error again. Again, not 5 spaces vertically away from the frame, but 5 spaces horizontally away from the frame. Hope this helps.
Nate -
Iam getting the error REP-1401: '': Fatal PL/SQL error occurred. when i
When i run the report to generate xml file in report builder the following error messages are displayed.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
pls help me.Its urgent
Regards,
KranthiHi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios -
ERROR PLEASE HELP URGENT!!!!!!!!
HI,
I am getting following error
REP-3000: Internal error starting Oracle Toolkit.
when I try to run my reports through browser.
can any one please help me.
Its very urgent.
TIA
RajeshI think knows Matrix reports very well Thiruchendhuran
Selladurai
Thanks
Raja -
I have a report, generated with Oracle Reports 6i, that when I generate it and view it in the previewer, it is generated without any problems and I am able to see the report.
When I tried to save it by going to File -> Generate to File -> PDF, I am getting the error message REP-1814: Report Cannot be formatted. Object 'vertically' can never fit within 'B_1'.
Does anyone have an idea of what's going on? Thanks.Hi Mihn,
Thanks for your reply.
Actually, I was just able to solve this issue. All I did was to add a printer to the user's desktop. After doing that, the user can now save the report as any format she wants. -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Reports error REP-0069,REP-57054,REP-300
hi,
I am getting below error while running the report.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: Parallel query is not supported on temporary LOBs
SELECT DP.DES ==> CRIPTION AS "DEPARTMENT",
Plz suggest.
Tks,
Shubhen1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Error REP-0300: ORACLE error occurred while running Custom Report
Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein -
Error : REP-771: 'afterpform': Fatal PL/SQL error occurred
I have oracle app server 10gr2 on solaris.
when i try to access the reports it shows me the error : REP-771: 'afterpform': Fatal PL/SQL error occurred
Did not get any good information from the logs.
How can I solve the problem or any other logs I can look yet.
ThanksI'd assume you change varchar2 to clob in db. Reports does not support clob so you need to_char() on the former varchar2 column, which is clob now.
-
SQL Server Service is stoping with an Error Code : 1814
Hi,
I have an SCCM Server in My organization. Where we have installed Microsoft SQL Server 2008 R2 for the database of SCCM Application.
Now I am not able to Start the SCCM console due to some dependent Services are not starting. 3 services has to be started for the perfect working of SCCM.
1)SQL Server
2) SQL Server Agent
3) SQL Server Reporting Services
Out of three the first two services are not starting at all. I am getting an error while trying to start SQL Server Services.
" Windows Could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the system event Log, If this is a non-Microsoft Service, contact the service vender , and refer to service-specific error code
1814."
Please help me to start the services and resolve the SCCM Server issue.
Thanks,
Henoy TM
+918888631370Hi Xing,
I have check the Error Log : Please find the logfile details:
2013-04-11 11:11:57.54 Server Microsoft SQL Server 2008 R2 (SP1) - 10.50.2811.0 (X64)
Apr 6 2012 01:59:29
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2013-04-11 11:11:57.54 Server (c) Microsoft Corporation.
2013-04-11 11:11:57.54 Server All rights reserved.
2013-04-11 11:11:57.54 Server Server process ID is 10348.
2013-04-11 11:11:57.54 Server System Manufacturer: 'HP', System Model: 'ProLiant DL380 G6'.
2013-04-11 11:11:57.54 Server Authentication mode is WINDOWS-ONLY.
2013-04-11 11:11:57.54 Server Logging SQL Server messages in file 'H:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2013-04-11 11:11:57.54 Server This instance of SQL Server last reported using a process ID of 4428 at 4/11/2013 10:41:54 AM (local) 4/11/2013 5:11:54 AM (UTC). This is an informational message only; no user action is required.
2013-04-11 11:11:57.54 Server Registry startup parameters:
-d H:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e H:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l H:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 8295
-T 4199
2013-04-11 11:11:57.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2013-04-11 11:11:57.56 Server Detected 8 CPUs. This is an informational message; no user action is required.
2013-04-11 11:11:57.59 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2013-04-11 11:11:57.61 Server Node configuration: node 0: CPU mask: 0x00000000000000f0:0 Active CPU mask: 0x00000000000000f0:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2013-04-11 11:11:57.61 Server Node configuration: node 1: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2013-04-11 11:11:57.66 spid9s Starting up database 'master'.
2013-04-11 11:11:58.24 spid9s Resource governor reconfiguration succeeded.
2013-04-11 11:11:58.24 spid9s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2013-04-11 11:11:58.24 spid9s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2013-04-11 11:11:58.24 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2013-04-11 11:11:58.27 spid9s SQL Trace ID 1 was started by login "sa".
2013-04-11 11:11:58.27 spid9s Starting up database 'mssqlsystemresource'.
2013-04-11 11:11:58.29 spid9s The resource database build version is 10.50.2811. This is an informational message only. No user action is required.
2013-04-11 11:11:58.38 spid9s Server name is 'SGL-PANJ-SCCM'. This is an informational message only. No user action is required.
2013-04-11 11:11:58.39 spid12s Starting up database 'model'.
2013-04-11 11:11:58.39 Server The certificate [Cert Hash(sha1) "6E37DB5BAE65C704EF7C1BA0DE6587F34B5E8A53"] was successfully loaded for encryption.
2013-04-11 11:11:58.40 Server Server is listening on [ 'any' <ipv6> 1433].
2013-04-11 11:11:58.40 Server Server is listening on [ 'any' <ipv4> 1433].
2013-04-11 11:11:58.40 Server Server local connection provider is ready to accept connection on [
\\ . \pipe \SQLLocal \ MSSQLSERVER].
2013-04-11 11:11:58.40 Server Server named pipe provider is ready to accept connection on [ \\. \ pipe\ sql \ query].
2013-04-11 11:11:58.40 Server Server is listening on [ ::1 <ipv6> 1434].
2013-04-11 11:11:58.40 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2013-04-11 11:11:58.40 Server Dedicated admin connection support was established for listening locally on port 1434.
2013-04-11 11:11:58.41 Logon Error: 17187, Severity: 16, State: 1.
2013-04-11 11:11:58.41 Logon SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL
Server is ready before trying to connect again. [CLIENT: 172.17.5.20]
2013-04-11 11:11:58.42 spid12s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2013-04-11 11:11:58.42 spid12s Error: 927, Severity: 14, State: 2.
2013-04-11 11:11:58.42 spid12s Database 'model' cannot be opened. It is in the middle of a restore.
2013-04-11 11:11:58.42 spid12s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2013-04-11 11:11:58.42 spid12s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2013-04-11 11:11:58.43 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x2098, state: 15. Failure to register an SPN may cause integrated authentication
to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2013-04-11 11:11:58.43 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2013-04-11 11:11:58.52 Logon Error: 17188, Severity: 16, State: 1.
2013-04-11 11:11:58.52 Logon SQL Server cannot accept new connections, because it is shutting down. The connection has been closed. [CLIENT: ::1]
2013-04-11 11:11:58.54 Logon Error: 17188, Severity: 16, State: 1.
2013-04-11 11:11:58.54 Logon SQL Server cannot accept new connections, because it is shutting down. The connection has been closed. [CLIENT: 192.168.6.2]
2013-04-11 11:11:58.57 spid15s A new instance of the full-text filter daemon host process has been successfully started.
2013-04-11 11:11:58.60 spid16s Starting up database 'ReportServer'.
2013-04-11 11:11:58.60 spid17s Starting up database 'ReportServerTempDB'.
2013-04-11 11:11:58.60 spid18s Starting up database 'CM_P01'.
2013-04-11 11:11:58.60 spid15s Starting up database 'msdb'.
Cannot close event log because there are still event handle users active.
Regards,
Henoy
Maybe you are looking for
-
Function module ISR_GET_DATA_FROM_XML throwing dump.
Hi All, Function module ISR_GET_DATA_FROM_XML throwing dump. The dump says, The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "ISR_GET_DATA_FROM_XML" "(FUNCTION)", nor was it propagated by a RAISING clause
-
Facetime wont work on my ipod touch 4th gen. cant update to ios 7? what can i do?
Cant get my facetime to work. I have an ipod Touch, 4th generation with ios 6. Theres no update for ios 7 as it needs bigger memory. Anybody managed to solve this problem?? HELP ME PLEASE!
-
This is an irregular problem. Sometimes pdf files open; sometimes not. The message is always that this type of file is not supported by my browser.
-
How do I get 3g to work on my droidX again?
i lost 3g about 2 weeks ago and i have not figured out how to fix it. i've tried toggling airplane mode and i've checked for system updates (there aren't any) what do i do? i can only get wifi when i'm at home so i can't rely on only wifi. any sugges
-
Hello all, gotta question that I've been wresteling with for the better part of 2 days now. I'm running several filters on a very large data set. Each row in the data set is a product that has 8 or so properties. There are about 900 rows and each row