Error - REP 1849
Hi,
I do have a problem printing my report, it gives me this error, It's not a user interface error.. can anybody help me on this..
thanks in advance
Lilibeth
hi toby,
there is no error in setting up the printer. I don't know why this is happening. I tried to create a very simple report and still it doesn't send the report to printer.
I really appreciate if you have any ideas.
thanks in advance.
Lilibeth.
Similar Messages
-
REP-1849 HELP! Reports 6i runtime error message REP-1849
Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les BriesemeisterWe have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance -
REP-1849: Failed while printing : Problem while printing on network printer
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance ! -
Problem generating report ouput to a file -REP0069 REP57054 REP 1849
hi,
I am working with oracle reports builder (9i). i hv created some reports.While trying to get the report in a file(.txt) by using "File->generate to file" ,i am not able to generate...
i get error msgs as shown below...
rep 0069 - internal error whil generating report
REP-57054: In-proccess job terminated.
rep 1849 - Failed while printing
this poblem occurs only with the newly created reports(today n yesterday)...my old reports are running correctly....tats i am able to generate to file...Pls help me in this regard...
Thanks in advance...Thank you for the reply. I'm trying to download the patch, but I can't seem to find it. I assume this is a patch for the Reports Developer, correct? I did a search on bug 2490826 in Metalink and I haven't been able to find it. If you have the number of the patch you're referring to, please let me know.
Thank You,
Adina -
Hi! When I try print a report or run at a file it, I have REP-1849. I try print in a HP LASERJET 4000 SERIES PCL 6.
I have read this my be a bug, but I don't know what patch I mus install.
My version of reports is 6.0.8.11.3
Can You tell me EXACTILY how this solves?
Thank you very much,Hi Amparo,
REP-1849 is an abnormal condition, and can be caused by a system error outside of Oracle Reports. Pl try installing the latest 6i Patchset (Patchet 15 currently) from Metalink (metalink.oracle.com). The patch number is 3171855.
Navneet. -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Reports error REP-0069,REP-57054,REP-300
hi,
I am getting below error while running the report.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: Parallel query is not supported on temporary LOBs
SELECT DP.DES ==> CRIPTION AS "DEPARTMENT",
Plz suggest.
Tks,
Shubhen1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Error REP-0300: ORACLE error occurred while running Custom Report
Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein -
Error : REP-771: 'afterpform': Fatal PL/SQL error occurred
I have oracle app server 10gr2 on solaris.
when i try to access the reports it shows me the error : REP-771: 'afterpform': Fatal PL/SQL error occurred
Did not get any good information from the logs.
How can I solve the problem or any other logs I can look yet.
ThanksI'd assume you change varchar2 to clob in db. Reports does not support clob so you need to_char() on the former varchar2 column, which is clob now.
-
Iam getting the error REP-1401: '': Fatal PL/SQL error occurred. when i
When i run the report to generate xml file in report builder the following error messages are displayed.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
pls help me.Its urgent
Regards,
KranthiHi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios -
Generating delimited file from a report in reports 6i gives error rep-1814
Hi all,
We are using reports 6i.
We have a report from which we are trying to generate a delimited file.
We are encounterign the error REP-1814 The object vertically can never fit.
After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
Also we observe dthat this is done using th following command
set_report_object_property('exp039r', null,
' DELIMITER=tab' ||
'DELIMITED_HDR=no');
We tried doing that but, it is not working. Is there anything we should do to get it work.
Thanks and Regards,
HimaSee in Forms Forum
generating delimited file from a report in reports 6i gives error rep-1814 -
ORACLE 6i-Errors REP-0736 / REP-1247-Report works with a different name
Hi everybody,
I have a problem with a Report developed in 6i after I compiled it with Linux.
When I run report I had errors REP-0736 and REP-1247. But I didn't had any problem during compilation.
The fact is.............if I changed report name (just the name, without any other modification), compiled and run, it works perfectly. Just changing the name!
Obviously there is some place where the report name is corrupt, but I don't have the knowledge to find it.
Please, if somebody can give me a clue to solve this problem, I would appreciate a lot. I'm lost!
Thanks**What do you mean exactly by changing the name? The file name or the Name property in Report Builder?**
**What are the exact version numbers (Reports and Linux)? Did you make sure the combination is certified?**
**Did you create the report in Windows and transfer it to Linux? How did you do that? E.g. if you ftp it, make sure you use the binary format.**
**Are you compiling and running with the same user (Windows/Linux)?**
**Are the database versions the same (still assuming you develop in Windows development and run it later on Linux production)?**
Thanks for answer!
1. I mean by changing the Name property and the file name. Both.
2. The combination of versiones numbers is certified. This is the first report with this kind of problem. I've been compiling without any trouble until now. And even now, the only report with compilation problems is this.
Report version is 6.0.8.27.0
Linux version is Suse 9
3. I modify the report in Windows and transfer it to Linux. We use to copy the .RDF file to the directory where we always compile the objects to Linux.
4. Yes, I'm compiling with the same user
5. The database versiones are the same. You're correct, we develop in Windows and run it on Linux (production). -
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
hi all
i am using Application server 10g R2 while running report i am getting the following error
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
i configured the Reports_Path
with C:\windows\fonts if anyone faced the same problem plz help me.hi
if you have problem you can post your own thread and we will try to help you.
sarah -
Terminated with error: REP-300: ORACLE error occurred
We have OAS 10g on solaris.
When trying to generate a report we get the error : Terminated with error: REP-300: ORACLE error occurred
The report has been running fine until yesterday and today we are getting the error. I did not find anything relvant in metalink.
And no changes have been to the report.
Can anybody suggest me what to look yet or any possible things that might cause the error. The tracing is not enabled.
ThanksFound out it was a data error.
thanks -
Terminated with error:REP-56048:Engine rwHighEng-0 crashed
Hi Friends,
When i run a report using Oracle 10g IAS,i get an error:
'Terminated with error:REP-56048:Engine rwHighEng-0 crashed'
Anybody have the solution to handle it.Pls help!Thank you very much!Hi to all,
Since the last couple of days we are having a problem with Oracle Reports.
Whenever we run these reports, it behaves erratic.
The report comes normal for the first few reports, then suddenly the server gets hanged and no reports can be generated.
OS on Application server is Windows Server 2003.Os on client machine is XP and Vista
Error is as below in Application Report Server status
Terminated with error: REP-56048: Engine rwEng-0 crashed, job
Any immediate help is appreciated
Thanks
Nilesh
Maybe you are looking for
-
[SOLVED] Problem with UTC and CST
I probably made a mistake while installing Arch Linux and the clocks in my computer are all a mess. Right now the UTC time its 6+ hours, I changed it in the bios to the right hour but that give me -6 hours in the local time thats displayed in Arch Li
-
How to customize (or remove) the documentviewer toolbar in code (no xml)?
Hi all, I have a tab control that gets a new tab (with a documentviewer and a button) at runtime as the user selects items from a listbox. There is no xml for the new tabs ( but there is for the tabControl). The new tabs are generated at run time. Af
-
Synch Problem - Canon 7D, Zoom H1 and Final Cut Pro 7
Hello, I'm about to pull out my hair here. Been on many forums and sites with noluck on fixing this annoying issue. Yesterday I shot an interview on my Canon7D with my new Zoom H1 recorder. The recorder has been set to MP3 output at 128kbps. The Cano
-
Please forgive me. I am a bit embarrassed to even mention Microsoft Movie Maker on this forum, because after using Premiere 6.0 for many years, and now very recently acquireing Premiere Pro CS4, The Microsoft program just feels so clunky and it feels
-
Hi, We are currentrunly using oracle 10.2.0.3 with 2 node RAC with ASM. How we can clone that.