Error report from validation

Hi,
I used validation in the transformation and pointed to PASS and FAIL. The fail should generate an error report, but where will i find the error report?
Is it in the management console?
Appreciate your help.
Thanks,
Arun

Hi Arun,
If I understood your design, youu2019re using a Validation transform and redirecting the u2018FAILSu2019 to another target. Is that right?
Well, the statistics for that can be found in the MC, under Data Validation area. But the statistics will be collected only if you set the u2018Collect data validation statisticsu2019 under the u2018Validation Transform optionu2019 found inside the Validation transform (Validation, validation, validation!). This data is collected only for failures.
Try that and let us know if you manage to find what you need.
Regards,
Pedro

Similar Messages

Error reported from DirectoryService hangs syslog and computer

I am getting an odd behaviour from my Mac. I recently had an issue with Eclipse and had to hard switch the computer, since it hang all the machine.
When booting again, whenever I start Eclipse, I get the same behaviour. CPU gets high, to 80-90%, processes DirectoryService and mDNSResponder are the most active, and messages starts to run to the syslog. The message is:
++++++++++++++++++
Dec 3 16:37:20: --- last message repeated 499 times ---
Dec 3 16:37:20 machine DirectoryService\[ 11 \] : * process 11 exceeded 500 log
message per second limit - remaining messages this second discarded *
Dec 3 16:37:20 machine DirectoryService\[ 11 \] : dnssd_clientstub deliver_reques
t: socketpair failed 24 (Too many open files)
++++++++++++++++++
It seems the dns service is not operating correctly, but I don't know the cause.
Message was edited by: miceno

Why is it related to Spotlight? From http://www.westwind.com/reference/OS-X/background-processes.html:
DirectoryService: This process acts as a central clearinghouse for "Directory" information -- mainly users/groups/authentication, and service location (e.g. file servers, printers, etc). It gathers information from a variety of plugins (NetInfo, LDAP, Active Directory, NIS, Bonjour/Rendesvous/, AppleTalk, SMB) and hands it out to whatever program requested it.
I am running Spotlight normally and I did'nt have this problem before. The problem should be something related to DNS, or the like, since mDNSresolver is also generating a lot of activity.
I have 80 Gb free space in the disk.
I have run Disk Utility/First Aid to check for errors and do repairs: no problem, no repairs.
Let DirectoryService etc. run for a while when all is well to re-index for Spotlight: done
Exclude any resources in System Prefs/Spotlight so that time isn't spent combing thru them: done.
Nevertheless, I didn't use Eclipse for a while (these two months) and I almost forgot about the problem. Today, I have just open it again and again, the same problem.

Fpga unexpected error reported from new vi wizard

When i use the new vi wizard , select a new fpga project -> R-series on RT pxi -> create new system
I get a pop up saying unexpected error. I have tried a repair to no avail. I have LV2010 and am looking to use a PXI-7813R
many thanks in advance
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Hi joedowdle,
Sorry to hear that you're having issues creating an FPGA project.
To prevent this error occurring, it seems that one option that has previously been successful, was to uninstall and reinstall LabVIEW and the additional modules. I do appreciate that this would be rather time consuming, so I would like to try some additional troubleshooting steps with yourself first.
Have you been able to successfully create a standard LabVIEW project without it crashing? If so, could you please try to manually add your R-series card to it please?
On a similar note, are you able to successfully run an R-series example project? You can find one of these through LabVIEW >> Help >> Find Examples. And in the example finder go to Hardware Input and Output >> R Series >> Basic I/O, then select an example.
There are some additional steps that I'd recommend having a look at, in the R-Series user manual which I think is really useful for both explaining where your hardware should appear in the Measurement and Automation Explorer software (MAX) and how to use an example.
As you mentioned your versions of LabVIEW, FPGA and Real-Time, what version of NI-RIO do you have installed? If this is incompatible with LabVIEW 2011 and the FPGA module, this could potentially be the root of the crash. For LabVIEW 2011, you will need to have version 4.0 installed.
Best wishes,
Tori
Student

Error declarations for error reporting to the Client

Hi,
I am trying to standardize the error reporting from PL/SQL for our project.
I created a package to define these errors and want to declare them as constants.
Unfortunately i'm running into some restrictions.
Option1:
Declare the ErrCd as a constant (-20000 To -20999) and then use an associative array with the ErrCd as index and the text as the value.
Option 2:
Declare a Record type with the ErrCd and ErrText as fields. Associate the errormessage with a position eg errIdx := 1; This will then be the position in the nested table. The procedures will then reference the correct errorRec through the ErrIdx.
The problem is that i want to do all this in the package spec. I don't want to work through a function to first build up the table and then return the correct error record etc.
I cannot build the associative array in the declaration since it doesn't have a constructor.
Nested tables seemed like the one to use since i could build up its content through its constructor. But i cannot construct the errRecord in a similar way.
SUBTYPE ErrIdxType    IS INTEGER;
SUBTYPE ErrCdType     IS INTEGER;
SUBTYPE ErrTxtType    IS VARCHAR2(300);
ERR_CD_BASE           CONSTANT ErrCdType := -19999;
ERR_CD_MAX            CONSTANT ErrCdType := -20999;
TYPE ERR_REC IS RECORD
    errCd   ErrCdType,
    errTxt ErrTxtType
-- Error 1 tester
ERR_ERR1_IDX        CONSTANT ErrIdxType := 1;
ERR_ERR1_CD         CONSTANT ErrCdType := ERR_CD_BASE - ERR_ERR1_IDX;
ERR_ERR1_TXT        CONSTANT ErrTxtType := 'Error ERR1 occured.';
-- Error 2 tester
ERR_ERR2_IDX        CONSTANT ErrIdxType := 2;
ERR_ERR2_CD         CONSTANT ErrCdType := ERR_CD_BASE - ERR_ERR2_IDX;
ERR_ERR2_TXT        CONSTANT ErrTxtType := 'Error ERR2 occured.';
TYPE ErrTableType IS TABLE OF ERR_REC;
errTable ErrTableType :=
    ErrTableType
      ERR_REC(ERR_ERR1_CD, ERR_ERR1_TXT),
      ERR_REC(ERR_ERR2_CD, ERR_ERR2_TXT)
    );I suppose the java still has a strong grip on me here.
What is the correct way to manage these error definitions?
Since i am trying to establish the error/exception handling strategy for the project i would also greatly appreciate a couple of pointers to examples/packages/docs on the error /exception reporting mechanisms available.
Thanks
Buks

That looks like data to me. Now if only PL/SQL had some kind of a database that came with it so you put that data in a table ;)
Error messages change and so are not good candidates for constants. What you could find useful to declare in a package is some exceptions. You will find more about them in the PL/SQL Guide.
You should also check this series of Oracle Magazine articles written by Steven Feuerstein (Whom God Preserve).
Cheers, APC

ITunes - Not Opening Up Again - Error Report

Hi,
I've been reading some of the older threads who have had the same problem. This just started today. I've had iTunes 6.1 for about a week now. I've disabled my Mcafee and have done "clean" uninstalls of all iTunes software, installed standalone quicktime and iTunes still won't open. Can someone help me? Here is the error report from Windows:
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="iTunes.exe" FILTER="GRABMIFILTERPRIVACY">
<MATCHING_FILE NAME="CDDBControlApple.dll" SIZE="495616" CHECKSUM="0xC921E862" BINFILEVERSION="2.0.0.11" BINPRODUCTVERSION="2.0.0.11" PRODUCT_VERSION="2, 0, 0, 11" FILE_DESCRIPTION="CDDBControl Core Module (Apple)" COMPANY_NAME="Gracenote (formerly CDDB, Inc.)" PRODUCT_NAME="CDDBControl Core Module" FILE_VERSION="2, 0, 0, 11" ORIGINAL_FILENAME="CDDBControlApple.DLL" INTERNAL_NAME="CDDBControl" LEGAL_COPYRIGHT="Copyright 1999 - 2003" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="2.0.0.11" UPTOBIN_PRODUCTVERSION="2.0.0.11" LINK_DATE="07/30/2003 17:41:06" UPTOLINKDATE="07/30/2003 17:41:06" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="iTunes.exe" SIZE="10996224" CHECKSUM="0xE4B5FCE4" BINFILEVERSION="4.6.0.15" BINPRODUCTVERSION="4.6.0.15" PRODUCT_VERSION="4.6.0.15" FILE_DESCRIPTION="iTunes" COMPANY_NAME="Apple Computer, Inc." PRODUCT_NAME="iTunes" FILE_VERSION="4.6.0.15" ORIGINAL_FILENAME="iTunes.exe" INTERNAL_NAME="iTunes" LEGAL_COPYRIGHT="© 2003-2004 Apple Computer, Inc. All Rights Reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="4.6.0.15" UPTOBIN_PRODUCTVERSION="4.6.0.15" LINK_DATE="06/04/2004 12:35:54" UPTOLINKDATE="06/04/2004 12:35:54" VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="iTunesHelper.exe" SIZE="286720" CHECKSUM="0xEE1A6CCC" BINFILEVERSION="4.6.0.15" BINPRODUCTVERSION="4.6.0.15" PRODUCT_VERSION="4.6.0.15" FILE_DESCRIPTION="iTunesHelper Module" COMPANY_NAME="Apple Computer, Inc." PRODUCT_NAME="iTunes" FILE_VERSION="4.6.0.15" ORIGINAL_FILENAME="iTunesHelper.exe" INTERNAL_NAME="iTunesHelper" LEGAL_COPYRIGHT="© 2003-2004 Apple Computer, Inc. All Rights Reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x0" LINKER_VERSION="0x0" UPTOBIN_FILEVERSION="4.6.0.15" UPTOBIN_PRODUCTVERSION="4.6.0.15" LINK_DATE="06/04/2004 20:38:10" UPTOLINKDATE="06/04/2004 20:38:10" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
<EXE NAME="kernel32.dll" FILTER="GRABMIFILTERTHISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="983552" CHECKSUM="0x4CE79457" BINFILEVERSION="5.1.2600.2180" BINPRODUCTVERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="5.1.2600.2180 (xpspsp2rtm.040803-2158)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001" UPTOBIN_FILEVERSION="5.1.2600.2180" UPTOBIN_PRODUCTVERSION="5.1.2600.2180" LINK_DATE="08/04/2004 07:56:36" UPTOLINKDATE="08/04/2004 07:56:36" VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>

Go here. dp what, "ITUNES WON'T OPEN", 08:53pm Oct 26, 2005 CDT First, try my first post about SC Info. If that doesn't work, proceed to my second which also has a possible remedy for your problem. Also, where the **** did you get that error report?

Error report form iTunes Store: Missing Nib File

After having uploaded the .zip-file to the iTunes Store (update of an existing app), I got the following error-report from the iTunes store: Missing Nib File - The referenced nib file "MainWindow.nib" was not found in the application bundle. Is it possible that this error occurred while creating the app in the Adobe app builder or where do I have to look for this error? The first uploading of the original app worked without an error. What do you recommend me?
Thank you very much for an answer.
Ueli Mattenberger, VMA Media AG, Switzerland

See http://forums.adobe.com/thread/1277293 and http://status.adobedps.com/ for information on this issue.
Neil

Event Viewer Error Reports

How do I send all my event viewer error reports from 3/1/15 to the manufacturer of my computer? IN the event viewer window there seems to be a lock on opening submenu to perform a copy and paste or a SEND option available. I have a WINDOWS 8.1
OPERATING SYSTEM.

You should be able to right click on each indivudual log "App, Sec, Setup, System, etc" and click on Save all events as.

How can we transfer error report

Hi!
experts,
how can we transfer error report from a BAPI to the application server? as i am collecting the error report from the BAPI ?

You can use the following code in your program for your ref:
REPORT ZEX_DATATOFILE .
*& ABAPLOVERS: Data Transfer
Parameters to enter the path
PARAMETERS FILENAME(128) DEFAULT '/usr/tmp/testfile.dat'
                         LOWER CASE.
Table Declaration
DATA: it_return type table of BAPIRET2.
Data Declaration
DATA D_MSG_TEXT(50).
populate DOCUMENTHEADER and pass to BAPI
*You can call your Bapi here *
CALL FUNCTION 'BAPI_ACC_GL_POSTING_POST'
EXPORTING
    documentheader       = <header>
IMPORTING
OBJ_TYPE             =
OBJ_KEY              =
OBJ_SYS              =
tables
    accountgl            =
    currencyamount       =
    return               = it_return
EXTENSION1           =
collect all the logs in one internal table
ENDLOOP.
Opening the File
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE
                      MESSAGE D_MSG_TEXT.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', D_MSG_TEXT.
EXIT.
ENDIF.
Transferring Data
LOOP AT it_return to wa_return .
TRANSFER wa_return TO FILENAME.
ENDLOOP.
Closing the File
CLOSE DATASET FILENAME.
Regards
Dhirendra
Edited by: dhirendra pandit on Jul 7, 2009 1:55 PM

Need help with an error report

Attached is an error report from a VI that normally crashes with Error Checking set to Default in the VI's LCFN configuration dialog box. Can't debug it when it crashes; LabWindows CVI comes up for debug but CVI crashes too.
The attached error report was only available after setting Error Checking to 'No Error Checking'.
Any ideas what's going on with this DLL function called by the LCFN?
Platform: Windows 7-32 + LV2013 Pro SP1-32.
Jeff
Jeffrey Bledsoe
Electrical Engineer
Solved!
Go to Solution.
Attachments:
1607b431-02ef-4672-a138-c2ebc4a16c2b.zip ‏20 KB

Connor,
Sorry, I meant CLFN.
This isn't an executable.
It's good LV2009 code (ran okay with LV2009) that I'm trying to execute with LV2013. I ran a mass compile on all the VIs.
I posted this issue a few months ago when using an evaluation copy of LV2013 but have only recently begun looking at it again after I installed our purchased copy of LV2013.
I can prevent LV crashes from this VI by changing its calling convention from "C" to "StdCall." However, the value returned from the DLL function is invalid. While the DLL function returns an invalild value, I added "unbundle by name" VIs to the error stream on the input and the output of the CLFN. Results: the error 'code' at the input and the output of the CLFN = 0.
The supplier of the DLL said the DLL functions are written in either C or C++. I've found notes at ni.com that indicate a "Wrapper DLL" (written in C) might be required to provide a "C to C++" translation interface between the CLFN and the DLL functions.
Another approach I've found on ni.com appears to be replacing the CLFN with a Code Interface Node (CIN) having C code to interface LV with the C++ code of the DLL function, thus eliminating the CLFN.
There are also some notes on ni.com concerning CLFN settings causing crashes in the LV2009 to LV2010 transition; apparently, other changes between LV2010 and LV2013 are causing my issue.
The supplier of the free DLL now has a LV developers kit (for purchase) that might solve these issues but we can't go that route.
Thanks,
Jeff
Jeffrey Bledsoe
Electrical Engineer

Import Error - application from apex 3.2.1 imported into 3.2.0

Hi,
I try to import 2 application from apex 3.2.1 into 3.2.0
First (open application) - working without login in - was imported with success.
Secound one - witch working with APEX user autentication - I could not install.
Current Workspace:      S_WORKSPACE
Export File Workspace:      S_WORKSPACE
Export File Workspace ID:      1021311098347247
Export File Application ID:      107
Export File Version:      2009.01.12
Export File Parsing Schema:      SY
Application Origin:      This application was exported from the current workspace.
I get only error report from instalation process:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: linia 90, kolumna 32: PLS-00201: identyfikator 'MUST_NOT_BE_PUBLIC_USER' powinien być zadeklarowany ORA-06550: linia 39, kolumna 1: PL/SQL: Statement ignored <pre>declare a1 varchar2(32767) := null; begin a1:=a1||'select'||chr(10)|| 'a.KODARTYKULU as KODARTYKULU ,'||chr(10)|| '''&lt;b&gt;''||a.KODARTYKULU||''&lt;/b&gt;'' as KODARTYKULU_NR,'||chr(10)|| 'a.KODARTYKULU as DoAutorow,'||chr(1
How can I install aplication?
Please help me,
Mark

In SQL-Developer connect to your Apex's schema and open the schema browser (you should see it on the sidebar with options : tables,views,indexes etc..). Within that you can see "Application Express" (its further down after the usual DB object groups), expand that and you should see your applications.
Right click on the Application Name and choose export DDL -> Save to file.

Fault bucket -Windows Error reporting

Fault bucket 3981204210, type 5
What does type 5 signify?
TIA, Gerry

Hi,
I found this WIKI
Event ID 1001: Windows Error Reporting, from this article I see a sentence:
The bucket table (that is,
the Fault bucket type) for phony error bucket numbers is 5.
The article above also gives an explanation for type 1 to 4:
1:Crash32 buckets
2: Setup buckets
3: Crash64 buckets
4: Generic reports
Hope this might help
Best regards
Michael Shao
TechNet Community Support

Error while executing a report from Planning

Hi,
I've got this error message when I execute a report from Hyperion Planning (web) :
"5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
Can you help me please ?
Thanks.
Virgile.

I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
restart the BI+ reporting services and then try to run the reports!

Error Launching Web Analysis Report from the Hyperion Workspace

Hi Everyone
When launching the report as a HTML from the Workspace, the output flashes briefly on screen
The view in the content pane disappears to leave a blank screen.
When I Select View | Refresh. The following result is returned "Web Analysis Information" -1
I have set the report in start up preferences. And Web Analysis preferences set to open as HTML
After logging on again the following error is shown " An attempt to open "Actual vs Budget" Failed
Show Details displays: this.getFocusRoot() is nullor not an object
The reports all display correctly when launched from the Web Analysis studio
Any ideas will be greatly appreciated
Thanks
G
Web Analysis Version
Server Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Server VM
VM Version: Java HotSpot(TM) Server VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_11
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 66519040
Free Memory: 22975320
Locale: English (United States)
Client Information
Version: 11.1.1.0.0.724
Class Version: Java HotSpot(TM) Client VM
VM Version: Java HotSpot(TM) Client VM
VM Vendor: Sun Microsystems Inc.
Java Vendor: Sun Microsystems Inc.
Java Version: 1.5.0_12
OS Name: Windows 2003
OS Version: 5.2
Total Memory: 34766848
Free Memory: 10688504
Locale: English (United States)

Hi Ian,
Thanks for the advise but I have looked into your possible solution and referred to the Web Analysis user guide. I have a number of reports and when selecting the Design for HTML option - a number of objects are valid and should be displayed in the workspace.
After creating reports from scratch - with valid objects - the problem still persists.
Unfortunately, I don't think this provides a solution to the problem.
Cheers
G

Error running reports Parameter validation failed

Hi All
I have a user who gets an error when running reports from a remote console. If I log on with my account on his console I am able to run the report..
I have checked a few things and now open to some suggestions.. please
SMSAdminUI.log
   at System.Management.ManagementObject.Initialize(Boolean getObject)
   at System.Management.ManagementBaseObject.get_wbemObject()
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
   at System.Management.ManagementBaseObject.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object ResourceID=83886343";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1198;
Operation = "GetObject";
ParameterInfo = "SMS_MachineSettings.ResourceID=\"83886343\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[17, PID:8664][10/23/2014 08:27:20] :System.Management.ManagementException\r\nInvalid class \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Identification";
ProviderName = "WinMgmt";
\r\n
[23, PID:8664][10/23/2014 08:27:59] Parameter validation failed. It is not possible to provide valid values for all parameters. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not possible
to provide valid values for all parameters.

ReportServerService.log
(/ConfigMgr_J01/Site - Discovery and Inventory Information/Computers with duplicate MAC addresses).
library!ReportServer_0-20!358!10/24/2014-10:18:47:: i INFO: Call to GetPropertiesAction(/ConfigMgr_J01/Site - Discovery and Inventory Information, PathBased).
library!ReportServer_0-20!358!10/24/2014-10:18:47:: i INFO: Call to GetReportParametersAction(/ConfigMgr_J01/Site - Discovery and Inventory Information/Computers with duplicate MAC addresses).
processing!ReportServer_0-20!358!10/24/2014-10:18:47:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not
possible to provide valid values for all parameters.;
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetItemTypeAction(/).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetItemTypeAction(/).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetDataSourceContentsAction(/ConfigMgr_J01/{5C6358F2-4BB6-4a1b-A16E-8D96795D8602}).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetPropertiesAction(/ConfigMgr_J01, PathBased).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetItemTypeAction(/).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to GetDataSourceContentsAction(/ConfigMgr_J01/{5C6358F2-4BB6-4a1b-A16E-8D96795D8602}).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to CreateDataSourceAction({5C6358F2-4BB6-4a1b-A16E-8D96795D8602}, /ConfigMgr_J01, True).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to ListTasksAction(Catalog).
library!ReportServer_0-20!358!10/24/2014-10:18:50:: i INFO: Call to SetPropertiesAction(/ConfigMgr_J01).
processing!ReportServer_0-20!358!10/24/2014-10:19:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not
possible to provide valid values for all parameters.;

Internal server error when running report from form

i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;

Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank

Error report from validation

Similar Messages

Maybe you are looking for