Error- Requirements blocked while demand transfer
Hello Experts,
I am transferring demand from DP to ECC using a transfer profile.
While the transfer happens, I am getting an error on the SCM queue manager as ' Requirements blocked' error code 6P012.
Requirement strategy is correctly maintained in the material master in ECC.
After analysing the function module REQUIREMENTS_MAINTAIN_RELEVANC, we understood that there is a check for 'classification' tab in material master. If the status is not right (green), this will result in data blockage.
However even with the classification tab well maintained, we are facing this issue.
I have tried to search SAP notes on the error code and the issue, but not of much help.
Any pointer would be of great help.
Regards
Manotosh
Hi All,
We got the solution. The issue is in the 'classification' details in the ECC material master. It should be all green in the 'classification' tab and the aggregation level for the DP job should be at product + location level.
Regards
Manotosh
Similar Messages
-
Error in MIGO while stock transfer from plant to Depot - Intra-company
Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK buttin in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
AnbuHi Anbu,
You have created the same thread in other forum also. please continue to interact other forum.
Please do not create the same question in different forums.
Kind regards,
Ramana -
Hi gurus,
I done BAPI_REQUIREMENTS_CHANGE, it get error "Requirement blocked", and now I come MD61, that material's error "Requirement blocked". What happend !!! And pls tell me how to fix ... and every thing about BAPI_REQUIREMENTS_CHANGE ...
Thanks for all ........Hai,
Use the below code after calling your BAPI:
data ls_return like BAPIRET2.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
Exporting
WAIT = 'X'
Importing
RETURN = ls_return.
if ls_return-type <> 'E'.
" success
else.
" failed
endif.
CALL FUNCTION 'DEQUEUE_ALL'. " Releases locked objects -
Error while activating Transfer Structure
Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu -
Error while installing transfer rules for 0PM_C03 from Business content
Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Am facing this error sqlcode :-6502 while running sql code in plsql block
Am facing this error sqlcode :-6502 while running sql code in plsql block.
am using query :
SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) FROM DUAL;
CAN any body tell me why.BD_Fayez wrote:
I've tried the following, but don't get any error.As I mentioned, most likely variable is too short:
SQL> declare
2 strSub varchar2(2);
3 begin
4 SELECT SUBSTR('123456DE789KL|987654321|B',1,INSTR('123456DE789KL|987654321|B','|')-1) into strSub FROM DUAL;
5 dbms_output.put_line(strSub);
6 end;
7 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4
SQL> SY. -
Error while doing transfer posting
Hi,
While doing transfer posting I am getting an error given below:
"Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
Please help me in this regard.
Thanks in advance.
SonalHi,
Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
Also check if there is any return material in the storage loc.
Regards,
satyajit
Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM -
Error message while upgrading transfer rules
hi
while migrating transfer rules to transformations
i am getting
automatic time convension not possible for source field kmonth.
i say continue and continue i got transformations
whjat is this message how can i solveHi,
Please check the settings for the mappings in the Transfer Rules. Also, have you made some settings for "kmonth' ? -
Spool error while data transfer
Hi,
I am trying to give barcode print, I am using Zebra S600 printer. when I issue the print with new spool request & print immediately, System is generating the spool but with error as Internal Error when printing ,Request on hold
Error class: delayed
Area: data transfer
I tried with SPAD also. How to solve this error.
Thanks & Regards,
Karthik.kHello,
Can u please tell me it is front end printer or remote printer and also please check that u have installed correct Printer driver.....
if possible then give one demo printout from u r machine instead of from SAP....
Thanks -
BAPI_GOODSMVT_CREATE ERROR: A System Error Has Occurred While Locking
Hi All,
I am having a problem with a Z program that I am writing.
Basically, it uses the BAPI mentioned in the title. The program will read excel file that is being uploaded, and then will segregate the line items by 200 lines.
That means, if I were to upload 1000 line items, the BAPI will be called and executed 5 times (1000/200 = 5).
However, when trying to upload 10000 line items, I received this error after around 3000 line items.
"A system error has occurred while locking".
This happens when IMPORT parameter TEST_RUN is set to 'X'.
I found this after some googling: http://sap.ittoolbox.com/groups/technical-functional/sap-basis/lock-entry-system-error-1674434
I am hoping for your expert thoughts on this.
Thank you.BAPI TO Upload Inventory Data
* GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
* 02 - MB31 - Goods Receipts for Prod Order
* 03 - MB1A - Goods Issue
* 04 - MB1B - Transfer Posting
* 05 - MB1C - Enter Other Goods Receipt
* 06 - MB11
* Domain: KZBEW - Movement Indicator
* Goods movement w/o reference
* B - Goods movement for purchase order
* F - Goods movement for production order
* L - Goods movement for delivery note
* K - Goods movement for kanban requirement (WM - internal only)
* O - Subsequent adjustment of "material-provided" consumption
* W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
errflag.
data: begin of pcitab occurs 100,
ext_doc(10), "External Document Number
mvt_type(3), "Movement Type
doc_date(8), "Document Date
post_date(8), "Posting Date
plant(4), "Plant
material(18), "Material Number
qty(13), "Quantity
recv_loc(4), "Receiving Location
issue_loc(4), "Issuing Location
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
del_no(10), "Delivery Purchase Order Number
del_item(3), "Delivery Item
prod_doc(10), "Production Document No
scrap_reason(10), "Scrap Reason
upd_sta(1), "Update Status
end of pcitab.
call function 'WS_UPLOAD'
exporting
filename = p-file
filetype = 'DAT'
* IMPORTING
* FILELENGTH =
tables
data_tab = pcitab
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
itab-move_type, itab-entry_qnt, itab-entry_uom,
itab-entry_uom_iso, itab-po_number, itab-po_item,
pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gmhead
goodsmvt_code = gmcode
* TESTRUN = ' '
* IMPORTING
goodsmvt_headret = mthead
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
tables
goodsmvt_item = itab
* GOODSMVT_SERIALNUMBER =
return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
write:/'Error in function', errmsg-message.
errflag = 'X'.
else.
write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
write:/ 'Error in updating'.
exit.
else.
write:/ mthead-mat_doc, mthead-doc_year.
perform upd_sta.
endif.
endif.
* FORM UPD_STA *
form upd_sta.
loop at pcitab.
pcitab-upd_sta = 'X'.
modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
exporting
filename = p-file
filetype = 'DAT'
* IMPORTING
* FILELENGTH =
tables
data_tab = pcitab
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* OTHERS = 6
endform.
Code Formatted by: Alvaro Tejada Galindo on Dec 26, 2008 10:20 AM -
Populate Tax Code in RKWA table while doing transfer posting through MIGO.
Hi All,
I have a requirement where for certain countries i have to pass the tax code to RKWA table while doing Transfer posting through MIGO transaction.
For certain countries which i have to pass the Tax code to RKWA table, basically will not be having the tax code. For this reason im looking for BADi/User exits where i can update the RKWA table with the tax code. If the tax code is not derived, im getting the error as 'No tax information found'.
Please suggest if any BADi/exits are available for this requirement.
Regards,
SantoshCheck the following SAP notes:
139176
579241
Regards,
Indranil -
Crystal reports 2008 sp3 : An error has occurred while attempting to load t
Hello,
Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it. If there is a better forum for this question, please let me know or feel free to move it.
We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
Our Environment:
Development Computer (32-bit, WinXP)
VS2008 (fully updated, was not installed with its Crystal Reports feature)
Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
Database Server (64-bit)
"SERVER2" is a Microsoft SQL Server 2008 server, fully updated
Web Server (64-bit)
"SERVER3" is a Microsoft Server 2008 R2 Web server.
We have an application that is installed on the Web server and it pulls data from the database server.
The webpages are accessing the database properly. There is a ShowReport.aspx webpage that has the
CrystalReportsViewer on it. We send parameters and logon information to ShowReport.aspx. ShowReport
works properly on our development computer and the report looks good, but it fails on the web server.
We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
Our application pool on the web server for this application is set to 32-bit mode. When I launch the
application, it works properly with the database and displays data on web pages, but when I try to
view a report on ShowReport, I get the following error message:
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required.
According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed. They are both Crystal Reports 2008 and not .NET. CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3. On our development computer, .ENGINE is 12.0.2000.0 and
the same version is on the web server.
So, I am completely at a loss as to why we are encountering this error. Help, Please!!!
Thank you in advance,
MikeHi Mike,
Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
Thank you
Don -
Serious Error shutdown message while exporting media
I am encountering an odd error message (from which I have never seen) when trying to export a project from Premiere Pro CC.
The error message (Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project) shuts down Premiere about 11-25% into the export. If I remove all effects on the media, the file exports fine, but will not if the effects remain on the media.
I have checked the permissions (as per Adobe forum advice), and they all allow me to read and write files, so that is not the issue. I have also restarted my computer, uninstalled / reinstalled Premiere, and tried rendering in different outputs, none of which have worked.
I also have the error code, but am unaware of how to attach it to this question.
Set up:
Late 2012 iMac
Mac OSX 10.9.2
3.9 GHz Intel Core i7
8GB memory
NVIDIA GeForce GTX 680MX 2GB
Premiere Pro CC
Using H2.64 in .MP4 files
Installed Plug ins:
Red Giant Magic Bullet Color Suite (used DeNoiser II in media)
Has anyone any clue as to what I should do/try next?
Thanks for any input,
MichaelI apologize about the length, but I am unaware of how to attach the error
code, so I am just going to past them.
Error code 1:
Process: Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media!
Path: /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/ MacOS/Adobe Premiere Pro CC!
Identifier:
Version:
Code Type:
Parent Process: launchd Re: Serious Error shutdown message while exporting media!
com.adobe.AdobePremierePro! 7.2.2 (7.2.2)!
X86-64 (Native)!
Responsible:
User ID:
Date/Time:
OS Version:
Report Version: 11!
Anonymous UUID: 8711E967-3395-F259-0577-C241B4768D8A! !
Sleep/Wake UUID: A31DF803-DBB0-48DE-800A-9076E03B5328!
Crashed Thread: 72 Dispatch queue: opencl_runtime!
Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media! 501!
2014-04-22 16:50:02.373 -0400! Mac OS X 10.9.2 (13C64)!
Exception Type: EXC_BAD_ACCESS (SIGSEGV)!
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008! !
VM Regions Near 0x8:!
--> !
__TEXT 0000000100000000-0000000100003000 Re: Serious Error shutdown message while exporting media r-x/rwx SM=COW /
Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/MacOS/Adobe Premiere Pro CC!
Thread 72 Crashed:: Dispatch queue: opencl_runtime!
0 com.apple.GeForceGLDriver !
1 com.apple.GeForceGLDriver !
2 libGPUSupportMercury.dylib !
0x00001234402e3ec4 0x123440000000 + 3030724! 0x00001234402e4361
0x123440000000 + 3031905! 0x00007fff89e1f8f7 gldLoadBuffer + 80!
0x00007fff95dedb16
0x7fff95dbd000 + 199446! 0x00007fff95df9d61 0x7fff95dbd000 + 249185!
0x00007fff95ddca4a
0x7fff95dbd000 + 129610! 0x00007fff95de01f0 0x7fff95dbd000 + 143856!
3 com.apple.opencl
4 com.apple.opencl
5 com.apple.opencl
6 com.apple.opencl
7 libdispatch.dylib !
8 libdispatch.dylib !
9 libdispatch.dylib !
10 libdispatch.dylib
11 libdispatch.dylib !
12 libsystem_pthread.dylib
13 libsystem_pthread.dylib
0x00007fff8b8a82ad dispatchclient_callout + 8! 0x00007fff8b8aa68f
dispatchqueue_drain + 451! 0x00007fff8b8ab9dd dispatchqueue_invoke + 110!
0x00007fff8b8a9fa3 dispatchroot_queue_drain + 75! 0x00007fff8b8ab193
dispatchworker_thread2 + 40!
================================
Error code trimmed down to essentials by moderator, with full report attached. -
MS Project 2010 - An unknown error has occurred while syncing to a SharePoint site.
Dear all,
I encountered a generic error when using MS Project 2010 to sync with our SharePoint 2013 on-premise. I want to clarify is it default behaviour or a bug.
When I start MS Project 2010 professional from new -> sync to Sharepoint by type in URL and the list name. I can create a new project list successfully. I have verified the tasks are sync to the Sharepoint and I am able to see them listed on site.
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. This time an error show up:
An unknown error has occurred while syncing to a SharePoint site. Ensure the SharePoint site is running and try again
Since I didn't add anything to the mpp file, I believe it doesn't contain any invalid data blocking the sync. What would be the problem? Thanks.
MarkNo, I didn't. I just fill the site path like:
http://sharepoint.com/sites/Project/
and then the List field:
ProjectA
I want to clarify the sequence should be:
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. Then error occur.
Maybe you are looking for
-
I have an HP printer that I print to wirelessly with other computers in my home office. The Atris 4g & LapDock system does not find my printer. help.
-
Issue with creation FAZ billing doc. No billing document created. No Log.
I am trying to post the invoice with the billing type(FAZ) Down payment request with the sales document type OR. I am using item category TAO and i have attached mile stone billing with this item category. When i try to invoice this down payement ite
-
MXF OP1a Master file converted to Blu Ray in AME to .m4v showa up in Encore as Untranscoded
Just started creating Blu Ray DVDs from MXF OP1a AVC-I 100 Master files. I use AME to convert to BR matching the settings of the master. It converts successfully creating video .m4v and PCM files. When I import them into Encore 6.02, the Project win
-
GPU Acceleration not working with large .psd?
My GPU accelleration works fine, but after I saved a large psd and quit, the next time I opened the file, the gpu was greyed out in the options. If I quit PS and restarted it, gpu would work again for new and other files, but when I try to open this
-
hi all when a transport request is created for a report program then which function modules are used (which r remote enabled) to send this Transport Request to Application Server? Regards Martin