Error: Resource not found in FilterOptionCollection. Please help

Hi Experts,
I'm currently implementing Approve Requests at a customer.
I've got the service TASKPROCESSING pointing to ERP_WF. I can see the catalog SAP_FND_TC_TX1 and I've created a tile, pointing to my scenario as defined in the netweaver gateway.
When I go to launchpad the reference error message is displayed.
Details on the word file.
Error Resource not found Filter Option Collection - Approve Requests.docx - Google Drive
Thanks in advance!

Thank you Andre,
We finally solved it. I post the correction for future reference.
The problem was solved by changing the configuration on the assignment of the data provider to the data model.
ZTM_TGW_SVC_MODEL_0001_BE software version was DEFAULT, when it should've been /IWPGW/BWF.
The route in SPRO is: SAP Netweaver->Gateway>OData Channel>Administration>General Settings> Assign Data Provider to Data Model.

Similar Messages

Outlook for mac, message HTTP error resource not found 18596

outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
Help appreciated!!!!!!!!

Same probelm any suggestions ????

ISE Guest Portal - Error Resource not found

Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?

Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.

Error: Resource not found: ${SCRATCH_COMMAND_ICON}.

Hello ,
I have just installed SQL Devloper Version 4.0.0.12 [Build MAIN-12.27] on on windows7-64Bit machine.
I just observed following error on Extensions log window.
-oracle.sqldeveloper.migration.application
Error: Resource not found: ${SCRATCH_COMMAND_ICON}
Note: I already had delppoyed Oracle SQL Developer 3.2 Release
when i double click the error its taking me to extension.xml line : <property name="SmallIcon">res:${SCRATCH_COMMAND_ICON}</property>
and i see "java.io.PrintWriter@57fff4da" line in Messages-Log window.
Hope this error doesn't create any problem. Any Idea ?

Getting the same error, and I am trying to use the database migration tool.
Under the Extensions Tab:
     oracle.sqldeveloper.migration.application
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Error: Resource not found: ${SCRATCH_COMMAND_ICON}.
Message was edited by: dbcapoeira

TS3682 i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space. please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space. please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

Try to connect in recovery mode to restore, without using the latest backup, explained here:
iOS: Unable to update or restore

Recently downloaded latest version of iTunes software, afterwards, while trying to sync iphone with PC received this error message: Unable to Load Resource not found; SyncUICoreLocalized.dll; please advise, thank you

Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll

THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple?

JNLP Error resource not found...

Hi All,
I am trying to use versioning in a JNLP file. But I get errors when:
1. if I have version="0.8" I get resource not found. If not entered jar found with no issues.
2. If I use __V0.8" added to the file name the same issue. But if I use _V0.8" without the second underscore then no error.
This happens when useing jre 1.6.0_45 or jre 1.7.0_51 on windows 8 or 7.
I have found no real examples using this format for version control on web start.
Thanks!
-Tony

hi
go to Application folder for finding jar files
goto start menu -> run -> Javaws -> File -> Preferences -> Advanced -> Applications folder
(C:\Documents and Settings\User Name\Application Data\Sun\Java\Deployment\javaws\cache)
you should have run the IR or ID at least once to find the Jar files in that folder. It is usually placed in http folder in cache
you do not generate them...every time you click on IR / ID links which have a .jnlp extension which is associated with Java web start, it checks if it has already downloaded version of the jar files on the local system in the folder as mentioned ..if yes..then the application starts using the cached jar files and if not then downloads those jar files first...but offcourse...you never create them
i think this solves your issue
if problem persists re-installed freshly j2sdk1.4.2_04
reward points if helpfull
regards
kummari
Edited by: kummari on Jul 11, 2008 5:46 AM

Nilvaiu Error (Resource not found)

I have developed an application that uses DAQmx to take data. While running in development mode, the software works fine. When I generate an executable and run the code, I get the Nilvaui.dll resource not found error (see attached). I can turn off my antivirus (AVAST) and it works fine. Any suggestions other than using a different anti-virus or non at all? By the way, I already repaired Max and rebooted my computer. The application is running on the same computer that the development system is on. I am using Labiew 2014 Pro.
Attachments:
Dll error.png ‏17 KB

http://www.ni.com/white-paper/12402/en/
It looks Like AVAST is stopping traffic on a port needed by your app. The link above will guide you to drill the right holes in the settings
Jeff

Customize 404 error (Resource not found) in iView

Hi all,
While using KM Document iView, if a KM Resource is not found, a 404 error message is displayed - The requested resource is not available.
Is there any way to customize this error message ?
Any help would be greatly appreciated.
Regards,
Adren

Hi Roy,
Thanks for your reply. But the scenario here is quite different. I want to display a custom error message at the iView level, not at the Page level, as mentioned in the link.
For e.g: In KM Document iView, there is a parameter named Path to Document, where we give the path to the KM Resource. If the resource does not exist, a 404 error message is displayed : "404 - The requested resource is not available". I need to show a custom mesage instead of this standard 404 error, and this is at iView level, not at page level.
Any ideas??
Regards,
Adren

Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario

Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AM

Hi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
     at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil

Package not found in import --please help me

Hi,
when I try to import jack.samples.*(<%@ page import="jack.samples.*" %>)
into the jsp ,it throws me error stating
"Package jack.samples not found in import".
1)After this,added path to this jar file in classpath i.e D:\jack\samples\samples.jar
2)still,error appears.
3)Now,added this jar file to jdk lib classes. still,error appears.
can somebody throw me light on how to trouble shoot this.
Thanks
Jack

Hi,
I was able to solve the above problem ,the moment I declared the constructor
has public.Now,I am trying to retreive the Item class partno value and it
throws me "
d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_1.java:784: No method matching getPartNo&#40;&#41; found in class jack.samples.Item. temp= i.getPartNo&#40;&#41;&#59;
I wonder what could be the cause.The code of Item class is here:
package jack.samples;
import java.util.*;
public class Item {
int partno;
String mfgno;
String description;
double cost;
public Item(int p,String m,String d,double c) {
partno = p;
mfgno=m;
description=d;
cost = c;
public int getPartNo() {
     return partno;
public double getCost() {
     return cost;
The JSP code :
<%
Iterator thisLot=linkTab.iterator(); // Iterate to get all items
     while(thisLot.hasNext()) { // output all the elements
     Item i = (Item) thisLot.next();
here it fails ******     temp= i.getPartNo();
%>
Thanks
Jack

Error downloading ur purchased music - server not found...please help!!

I have been getting the above message since Saturday and I just don't know what to do - I have tried contacing my internet service provider and Apple and they have both suggested that it might be to do with my firewall but I have tried disabling that and its still the same.
I have also removed and reinstalled itunes but this hasn't made any difference.
I'd really appreciate any other ideas as to what I could do to sort this out.
Many thanks.

Okay...I was able to contact their support and they sent me the following email. However, none of their initial steps seems to work for my case. I have done each of the steps listed in Windows: http://www.info.apple.com/kbnum/n93976. I am still getting the same error. Maybe, it will work for you guys. I am have responded back to them letting them know that it is still not working correcting for me.
Dear Patrick,
Thank you for your interest in iTunes. We're very sorry you ran into problems installing our software. We'll do everything we can to help you get up and running.
First, please make sure you're using the latest version of iTunes before you access the iTunes Music Store. You can download the latest version of iTunes from our website.
http://www.apple.com/itunes/download/
Next, please try the steps outlined in our installation troubleshooting articles.
Mac: http://www.info.apple.com/kbnum/n301349
Windows: http://www.info.apple.com/kbnum/n93976
Windows XP with Service Pack 2 users should also read this important article about changes to Internet Explorer download behavior.
http://www.info.apple.com/kbnum/n93975
If you're still having trouble installing iTunes, please reply to this email with what you tried and what errors or behavior iTunes displayed.
Sincerely,
The iTunes Music Store Team
http://www.apple.com/support/itunes/ww/
I am running Itunes 6.0.1.3
I ran through the steps that you provided and found that I do still have this video in my queue. However, when I go to Advanced -> Check for Purchases....I still receive the error (See attached image). It acts like it wants to download, but then it stops.
I am currently running on a wireless Home Network using High Speed DSL from BellSouth. I have checked my firewall setting and it appears to be open to Itunes. (See attached image)
The OS is XP with SP 2.
Let me know if this is enough information.
Thanks for the quick response,
Patrick

Error : Resource not found in the S/W component versions

Hello All,
I am using Pi 7.1 . I have a scenario IDoc to File . When i execute my end to end scenario i am getting the following error :
Unable to find resource bce2fba0-80bd-11de-93f0-e5e70ad6cb21 in the following software component versions: http://NANCO/N001/CMS_Customerscom/sap/xi/tf/_MM_N001_DEBMAS06_TO_CMS_Customers
whereas the mapping is working fine in the Operation mapping.
Can anybody hwlp me with this?
regards,
Loveena

Hi Loveena,
                    I hope you are doing good.
                    Try to test your interface Mapping. It should also work fine and should find Operation Mapping.
                     Test your configuration in Integration Directory.
                     If above steps does not work, change a mapping name by bit and check it after that.Even then it does not work.
                     Go for cache refresh.
Regards,
Anurag

Custom layouts not found in manual, please help

Hello-
Recently purchased a 30" cinema. I can't figure out how to make a custom layout of all the paletes so it fills up the screen. I see it in the "Window" drop down. It says "Save current layout" and then the two custom presets at the top are faded back. It's probably a simple fix, so if someone would type a quick response I'd appreciate it.
Thanks,
Tom J

I actually found the page by using the Online Help in FCP. Just type Custom Layout in the search box. So yes, the page was wrong for you. Sorry.
Ok --
You must SET the custom Layout first. THEN you can use Shift-U to pull it up.
Set your windows... Option (hold) Windows... Arrange... Set Custom Layout 1
Then -- change your layout and do the same for Set Custom Layout 2 or change to one of the presets.
THEN
Shift-U
Make sense?
CaptM

Tomcat v4.1 - Resource not found 500 Error - Help!

Hi,
I am a bit new to Tomcat, but have a really quick question. I am trying to deploy a new single class file to an existing Tomcat 4.1 web application, however, I am using Rational Application Developer 7.0 to create and compile the class. When I deploy the new class to the Tomcat 4.1 web application, the page crashes with a 500 error "Resource not found".
What could be causing this error? When I put the old class back in everything works ok. I have even tried using identical code, so I know it isn't a coding issue. Could it be the JRE being used to compile the class is the wrong type?
Any help would be much appreciated!
Thanks :)

Can you please provide the full error message and stack trace if possible?
Could it be the JRE being used to compile the class is the wrong type?Yes it definitely could be.
What version of java is tomcat running on?
You can find out with the following jsp fragment:
Working with server: <%= application.getServerInfo() %><br>
Servlet Specification: <%= application.getMajorVersion() %>.<%= application.getMinorVersion() %> <br>
JSP version: <%= JspFactory.getDefaultFactory().getEngineInfo().getSpecificationVersion() %><br>
Java version: <%= System.getProperty("java.version"); %><br>

Error: Resource not found in FilterOptionCollection. Please help

Similar Messages

Maybe you are looking for